Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sensitivity Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

The Response of Precipitation Extremes to the Twentieth- and Twenty-First-Century Global Temperature Change in a Comprehensive Suite of CESM1 Large Ensemble Simulation: Revisiting the Role of Forcing Agents Vs. the Role of Forcing Magnitudes

The response of precipitation extremes (PEs) to global warming is found to be nonlinear in Community Earth System Model version 1 (CESM1) and other global climate models (Pendergrass et al., 2019), which led to the concern that it is not accurate to approximate the response of PE to a single forcing as the difference between simulations with all forcing agents and those that exclude one specific forcing. This calls into question previous model-based results that the sensitivity of PE with warming due to aerosol forcing is significantly larger than that due to greenhouse gases (GHGs). We reevaluate the PE sensitivity to GHGs and aerosols using available CESM1 ensemble simulations. We show that although the PE response to warming is nonlinear in CESM1, especially for the high warming projected in the twenty-first-century, PE sensitivity to aerosols is still significantly stronger than that due to GHGs when the comparison is made within similar warming regimes to avoid the bias induced by the nonlinear behavior. But the difference is smaller than previously estimated. We also conclude that the additivity assumption is largely valid to isolate the PE response due to aerosol forcing from the paired simulations including the “all forcing” experiment when the warming regime is small (e.g., 1°C–2°C in the next few decades when aerosol forcing is projected to decline and becomes a major source of uncertainty for model projection).

58 GEOSCIENCES↗

Deforestation Increases Vegetation Vulnerability to Drought Across Biomes

Land use and land cover changes have altered terrestrial ecosystem carbon storage, but their impacts on ecosystem sensitivity to drought and temperature fluctuations have not been evaluated spatially over the globe. We estimate drought and temperature sensitivities of ecosystems using vegetation greenness from satellite observations and vegetation biomass from dynamic global vegetation model (DGVM) simulations. Using a space-for-time substitution with satellite data, we first illustrate the effects of vegetation cover changes on drought and temperature sensitivity and compare them with the effects estimated from DGVMs. We also compare simulations forced by scenarios with and without land cover changes to estimate the historical land cover change effects. Satellite data and vegetation models both show that converting forests to grasslands results in a more negative or decreased positive sensitivity of vegetation greenness or biomass to drought. Significant variability exists among models for other types of land cover transitions. We identify substantial effects of historical land cover changes on drought sensitivity from model simulations with a generally positive direction globally. Deforestation can lead to either an increased negative sensitivity, as drought-tolerant forests are replaced by grasslands based on model ensemble mean, or a decreased negative sensitivity, since forests under current land cover are predicted to exhibit greater drought resistance compared to those under pre-industrial land cover. Overall, our findings emphasize the critical role of forests in maintaining ecosystem stability and resistance to drought and temperature fluctuations, thereby implying their importance in stabilizing the carbon stock under increasingly extreme climate conditions.

Xiao, Chenwei [Max Planck Institute for Biogeochem↗

Testing CP properties of the Higgs boson coupling to τ leptons with heterogeneous graphs

In this paper we explore the possibility of utilizing Deep Learning in measuring the CP properties of the coupling of Higgs boson to τ leptons at the High Luminosity Large Hadron Collider. We employ three Deep Learning (DL) networks, Multi-Layer Perceptron (MLP), Graph Convolution Network (GCN), and Graph Transformer Network (GTN) to enhance signal-to-background separation. The angle between τ lepton decay planes at the detector level is CP-sensitive observables, and we develop Heterogeneous Graphs that integrate diverse node and edge structures to incorporate the CP-sensitive observable efficiently. Using simplified detector simulations we estimate the reconstruction accuracy of the angle between τ lepton planes at the detector level, considering hadronic τ decay modes and standard model backgrounds. With $\sqrt{s}$ = 14 TeV and $\mathcal{L}$ = 100 fb -1 , MLP excludes CP mixing angles above 20° at 68% confidence level (CL), while GCN and GTN achieve exclusions at 90% CL and 95% CL, respectively. The networks also achieve a 3σ significance in excluding a pure CP-odd state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Determining anisotropic slip system rate sensitivities of Ti-6Al-4V using high-energy X-ray diffraction microscopy

Variation of strain rate sensitivity among different families of slip systems in the hexagonal close-packed (α) phase of titanium (Ti) alloys has the potential to alter microscale load redistribution during both creep and dwell fatigue loading. However, existing literature contains conflicting reports regarding the degree of anisotropy present in the strain rate sensitives between α slip system families across Ti alloys. Here, we quantify the strain rate sensitivity of α slip system families in Ti-6Al-4V using high-energy X-ray diffraction microscopy (HEDM). We present a novel procedure in which we utilize the HEDM-measured grain-scale stress states during stress relaxation to determine the strain rate sensitivities of the basal $\langle a \rangle$ , prismatic $\langle a \rangle$, and first-order pyramidal $\langle c + a \rangle$ slip system families. In addition, we measure the strain rate sensitivity exponent of the macroscopic response and the α phase for comparison. We find rate sensitivities for the different slip system families to range from 0.02 to 0.04, which—while varied—are relatively isotropic in comparison with some values presented in the literature. We also demonstrate the effects of the measured anisotropic rate sensitivities using crystal plasticity finite element simulations.

Peterson, Kenneth M. [Pennsylvania State Univ., Un↗

Analysis of semivolatile organics in liquid radioactive residue using sorptive stir bar and solvent back-extraction

Current methods for semivolatiles analysis in radioactive samples can produce large volumes of radioactive solvent residue. A method utilizing stir-bar sorptive extraction has been explored in this work for its applicability to radioactive waste samples. This low solvent analytical method may accelerate remediation, minimize hazardous solvent waste, and reduce exposure risk to workers. Organic compounds (polyaromatic hydrocarbons, chlorinated aromatics, and phenolic compounds) were chosen as surrogates for common Liquid Waste System (LWS) contaminants at Savannah River Site (Aiken, SC). Stir-bar extraction parameters (extraction time, matrix modification, and effective pH range) and solvent back extraction parameters (solvent type, volume, and extraction time) were optimized experimentally for the chosen compounds. Affinity of the stir-bar extraction polymer to radionuclides Cs-137 and Am-241 was observed to determine radionuclide concentration effects. The stir-bar method achieved mean recovery of 100 ± 0.7% (1σ), relative to 114 ± 7% using solvent extraction, while reducing weekly method hands-on time by 93.4% and solvent volume consumption by 99.3%. Sensitivity was improved by 378% in simulated tank waste and 278% in real-world LWS matrix, relative to solvent extraction. This work has produced a safe and optimized method for the low solvent analysis of organics in legacy radioactive tank waste by stir-bar sorptive extraction.

GC-MS↗

Reformulating a Gurson-based dynamic damage model and demonstrating improved predictive power and numerical robustness

The original Tepla (TEnsile PLAsticity) ductile damage model, based on the Gurson yield surface, has long been used to model damage evolution and material failure under dynamic loading. Unfortunately, Tepla suffered from mesh sensitivity, numerical instability, and limited predictive capability. Here, we theoretically reformulate Tepla to address these issues. We especially focus on the prediction of porosity, which is the key state variable used for modeling ductile damage, as compared to more easily measured surface velocities, which are at best an indirect measure of damage. Key model changes include separating the viscosity during volumetric void growth from underlying shear strength behavior and switching to an iterative bisection solver. The new Tepla is then calibrated on incipient spall experiments on half-hard copper and tantalum, which demonstrate its ability to simultaneously fit the model to recovered porosity distributions and measured surface velocities, a stringent test. Improved numerical behavior, such as greatly reduced mesh sensitivity, is also shown in those simulations. Finally, the new Tepla model is applied to several high-explosive loaded, sweeping wave experiments, showing the ability of the model to predict behavior on tests with significantly different loading conditions and histories than the calibration data.

36 MATERIALS SCIENCE↗

Life-cycle cost-benefit analysis of a novel self-heating pavement made from coal-derived solid carbon

Winter weather events challenge the safety, efficiency, and sustainability of roadway networks, particularly road bridges vulnerable to climate impacts. Although effective, conventional de-icing methods incur high expenses and cause significant environmental contamination. To address these longstanding issues, a low-cost novel coal-derived carbon enabled smart pavement (CDC-SP) de-icing system was developed, aiming to alleviate traffic delays, severe corrosion, compromised safety, and environmental pollution. However, the economic performance of CDC-SP has not been quantified to guide decision-making. To this end, this paper presents a Life-Cycle Cost-Benefit Analysis (LCCBA) to assess the economic feasibility of the CDC-SP de-icing system for road bridges in five representative urban and rural areas across cool humid and cold humid climate zones. Given the variations and uncertainties of several factors that determine the costs and benefits, a sensitivity analysis was conducted to determine the system’s economic reliability. Additionally, a Monte Carlo simulation (MCS) was performed to quantify the impacts of important factors and identify the most beneficial scenarios. Furthermore, the CDC-SP de-icing systems have demonstrated substantial economic benefits and short payback periods, showing great applicability for rural and urban road bridges with different service levels across multiple climate zones as compared to conventional de-icing methods.

36 MATERIALS SCIENCE↗

How does humidity data impact land surface modeling of hydrothermal regimes at a permafrost site in Utqia$\mathrm{\dot{g}}$vik, Alaska?

Humidity is a basic and crucial meteorological indicator commonly measured in several forms, including specific humidity, relative humidity, and absolute humidity. These different forms can be inter-derived based on the saturation vapor pressure (SVP). In past decades, dozens of formulae have been developed to calculate the SVP with respect to, and in equilibrium with, liquid water and solid ice surfaces, but many prior studies use a single function for all temperature ranges, without considering the distinction between over the liquid water and ice surfaces. These different approaches can result in humidity estimates that may impact our understanding of surface-subsurface thermal-hydrological dynamics in cold regions. In this study, we compared the relative humidity (RH) downloaded and calculated from four data sources in Alaska based on five commonly used SVP formulas. These RHs, along with other meteorological indicators, were then used to drive physics-rich land surface models at a permafrost-affected site. Here, we found that higher values of RH (up to 40%) were obtained if the SVP was calculated with the over-ice formulation when air temperatures were below freezing, which could lead to a 30% maximum difference in snow depths. The choice of whether to separately calculate the SVP over an ice surface in winter also produced a significant range (up to 0.2 m) in simulated annual maximum thaw depths. The sensitivity of seasonal thaw depth to the formulation of SVP increases with the rainfall rate and the height of above-ground ponded water, while it diminishes with warmer air temperatures. These results show that RH variations based on the calculation of SVP with or without over-ice calculation meaningfully impact physically-based predictions of snow depth, sublimation, soil temperature, and active layer thickness. Under particular conditions, when severe flooding (inundation) and cool air temperatures are present, care should be taken to evaluate how humidity data is estimated for land surface and earth system modeling.

54 ENVIRONMENTAL SCIENCES↗

Development and Evaluation of E3SM‐MOSAIC: Spatial Distributions and Radiative Effects of Nitrate Aerosol

Abstract Nitrate aerosol plays an important role in affecting regional air quality as well as Earth's climate. However, it is not well represented or even neglected in many global climate models. In this study, we couple the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) module with the four‐mode version of the Modal Aerosol Module (MAM4) in DOE's Energy Exascale Earth System Model version 2 (E3SMv2) to simulate nitrate aerosol and its radiative effects. We find that nitrate aerosol simulated by E3SMv2‐MAM4‐MOSAIC is sensitive to the treatment of gaseous HNO 3 transfer to/from interstitial particles related to accommodation coefficients of HNO 3 ( ) on dust and non‐dust particles. We compare three different treatments of HNO 3 transfer: (a) a treatment (MTC_SLOW) that uses a low in the mass transfer coefficient (MTC) calculation; (b) a dust‐weighted MTC treatment (MTC_WGT) that uses a high on non‐dust particles; and (c) a dust‐weighted MTC treatment that also splits coarse mode aerosols into the coarse dust and sea salt sub‐modes in MOSAIC (MTC_SPLC). MTC_WGT and MTC_SPLC increase the global annual mean (2005–2014) nitrate burden from 0.096 (MTC_SLOW) to 0.237 and 0.185 Tg N, respectively, mostly in the coarse mode. MTC_WGT and MTC_SPLC also produce stronger nitrate direct radiative forcing (−0.048 and −0.051 W m −2 , respectively) and indirect forcing (−0.33 and −0.35 W m −2 , respectively) than MTC_SLOW (−0.021 and −0.24 W m −2 ). MTC_WGT and MTC_SPLC improve nitrate surface concentrations over remote oceans based on limited observations and vertical profiles of nitrate concentrations against aircraft measurements below 400 hPa.

54 ENVIRONMENTAL SCIENCES↗

Carbon and Water Fluxes of the Boreal Evergreen Needleleaf Forest Biome Constrained by Assimilating Ecosystem Carbonyl Sulfide Flux Observations

Gross primary production (GPP) by boreal forests is highly sensitive to environmental changes. However, GPP simulated by land surface models (LSMs) remains highly uncertain due to the lack of direct photosynthesis observations at large scales. Carbonyl sulfide (COS) has emerged as a promising proxy to improve the representation of GPP in LSMs. Because COS is absorbed by vegetation following the same diffusion pathway as CO2 during photosynthesis and not emitted back to the atmosphere, incorporating a mechanistic representation of vegetation COS uptake in LSMs allows using COS observations to refine GPP representation. Here, we perform ecosystem COS flux and GPP data assimilations to constrain the COS- and GPP-related parameters in the ORCHIDEE LSM for boreal evergreen needleleaf forests (BorENF). Assimilating ecosystem COS fluxes at Hyytiälä forest increases the simulated net ecosystem COS uptake by 14%. This increase largely results from changes in the internal conductance to COS, highlighting the need to improve the representation of COS internal diffusion and consumption. Moreover, joint assimilation of ecosystem COS flux and GPP at Hyytiälä improves the simulated latent heat flux, contrary to the GPP-only data assimilation, which fails to do so. Finally, we scaled this assimilation framework up to the boreal region and find that the joint assimilation of COS at Hyytiälä and GPP fluxes at 10 BorENF sites increases the modeled vegetation COS uptake up to 18%, but not GPP. Therefore, this study encourages the use of COS flux observations to inform GPP and latent heat flux representations in LSMs.

54 ENVIRONMENTAL SCIENCES↗

Spatiotemporal control of liquid crystal structure and dynamics through activity patterning

Active materials are capable of converting free energy into mechanical work to produce autonomous motion, and exhibit striking collective dynamics that biology relies on for essential functions. Controlling those dynamics and transport in synthetic systems has been particularly challenging. Here, we introduce the concept of spatially structured activity as a means of controlling and manipulating transport in active nematic liquid crystals consisting of actin filaments and light-sensitive myosin motors. In this work, simulations and experiments are used to demonstrate that topological defects can be generated at will and then constrained to move along specified trajectories by inducing local stresses in an otherwise passive material. These results provide a foundation for the design of autonomous and reconfigurable microfluidic systems where transport is controlled by modulating activity with light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Updated Thermofluid Performance of the Simplified Flat Variant of the HEMJ

Our group has recently developed and studied “finger”-type divertors that are a simplified version of the helium-cooled modular divertor with multiple jets (HEMJ) using coupled computational fluid dynamics and thermal stress simulations. Such a simplified geometry could reduce complexity and cost given the large number of fingers required to cover the total divertor target area. Previous experimental studies for this simplified flat design reported lower heat transfer coefficients and higher pressure drops than the HEMJ, contrary to numerical predictions. Subsequent measurements determined that the original test section had significant dimensional variations in the jet exit holes. A new test section was therefore manufactured and tested in the Georgia Tech (GT) helium loop. The experimental results presented here for this test section at maximum heat flux of 7.1 MW/m 2 are in good agreement with numerical predictions. Correlations developed from these experimental data are extrapolated to predict the maximum heat flux that can be accommodated by the flat design and the coolant pumping power requirements under prototypical conditions. Lastly, numerical simulations are used to estimate the sensitivity of the flat design to geometric variations typical of manufacturing tolerances and variations in the gap width.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Minimal cyclic behavior in sheared amorphous solids

Although jammed packings of soft spheres exist in potential energy landscapes with a vast number of minima, when subjected to cyclic shear they may revisit the same configurations repeatedly. Simple hysteretic spin models, in which particle rearrangements are represented by interacting spin flips called hysterons, capture many features of this periodic behavior. Yet it has been unclear to what extent individual rearrangements can be described by such binary objects and how such objects interact with one another. Using a particularly sensitive algorithm, we identify rearrangements in simulated jammed packings and select pairs of rearrangements that undo one another to create periodic cyclic behavior. We find that the rearrangement pairs surprisingly persist down to the smallest increments in strain, even in the smallest systems we can study. We explore the statistics of these rearrangement pairs and find that there is a relation between the amount of hysteresis and the energy drop and mean-square displacement of the particles; these results are inconsistent with the scaling found in models that treat rearrangements as localized buckling events. Finally, our analysis shows that there is no clean distinction between the particle motions that represent the identity of a single, individual rearrangement and the particle motions that lead to interactions between separated rearrangements or hysterons. These results offer insight into how complex systems such as amorphous solids can reach a limit cycle.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppression of ferromagnetic correlations in hole-doped SrCo 2 As 2

We report the growth of high-quality single crystals of hole-doped composition Sr 0.95 K 0.05 Co 2 As 2 and present an investigation of its structural, electronic, thermal, and magnetic properties. Our results show that hole doping leads to a substantial suppression of ferromagnetic (FM) correlations present in SrCo 2 As 2 leading to nearly isotropic magnetic susceptibilities χ ab,c (T) of Sr 0.95 K 0.05 Co 2 As 2 . The presence of FM fluctuations is considered one of the detrimental reasons why SrCo 2 As 2 does not achieve a superconducting ground state despite having a precursor for it in the form of stripe-like antiferromagnetic fluctuations. The suppression of FM fluctuations leads to qualitative similarities between the properties of hole-doped SrCo 2 As 2 and the end member of superconducting 122 iron-arsenide family KFe 2 As 2 . Our results also infer the presence of strongly correlated electronic states in Sr 0.95 K 0.05 Co 2 As 2 . Further, they show that the electronic structure of SrCo 2 As 2 as well as this hole-doped composition is exceptionally unstable in the vicinity of Fermi level EF for small alterations in the structural parameters and sensitively depends upon the details of simulation.

36 MATERIALS SCIENCE↗

The Radar Echo Telescope for Cosmic Rays: Pathfinder experiment for a next-generation neutrino observatory

The Radar Echo Telescope for Cosmic Rays (RET-CR) is a recently funded experiment designed to detect the englacial cascade of a cosmic ray-initiated air shower via in-ice radar, toward the goal of a full-scale, next-generation experiment to detect ultrahigh energy neutrinos in polar ice. For cosmic rays with a primary energy greater than 10 PeV, roughly 10% of an air shower’s energy reaches the surface of a high elevation ice sheet (≳2 ˙km) concentrated into a radius of roughly 10 cm. This penetrating shower core creates an in-ice cascade orders of magnitude more dense than the preceding in-air cascade. Additionally, this dense cascade can be detected via the radar echo technique, where transmitted radio waves are reflected from the ionization deposit left in the wake of the cascade. RET-CR will test the radar echo method in nature, with the in-ice cascade of a cosmic ray-initiated air shower serving as a test beam. In this work, we present the projected event rate and sensitivity based upon a three part simulation using corsika, geant4, and radioscatter. RET-CR expects ~1 radar echo event per day.

79 ASTRONOMY AND ASTROPHYSICS↗

Foreground-immune CMB lensing reconstruction with polarization

Extragalactic foregrounds are known to generate significant biases in temperature based CMB lensing reconstruction. Several techniques, which include "source hardening'" and "shear-only estimators'' have been proposed to mitigate contamination and have been shown to be very effective at reducing foreground-induced biases. Here we extend both techniques to polarization, which will be an essential component of CMB lensing reconstruction for future experiments and investigate the "large lens'' limit analytically to gain insight on the origin and scaling of foreground biases, as well as the sensitivity to their profiles. Furthermore, using simulations of polarized point sources, we estimate the expected bias to both Simons Observatory and CMB-S4 like (polarization-based) lensing reconstruction, finding that biases to the former are minuscule while those to the latter are potentially non-negligible at small scales ($L$ ~ $1000-2000$). In particular, we show that for a CMB-S4 like experiment, an optimal linear combination of point-source hardened estimators can reduce the (point-source induced) bias to the CMB lensing power spectrum by up to two orders of magnitude, at a ~ 4% noise cost relative to the global minimum variance estimator.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of cold cap coverage and emissivity on the plenum temperature in a pilot-scale waste vitrification melter

Integrated computational fluid dynamics (CFD) models are being developed to model the complex physics occurring within the high-level waste melter for vitrification of legacy tank waste at the Hanford site. Here, we present a validation of the integrated CFD model by using data from two experimental runs in a pilot-scale melter. While the model uses several simplifying assumptions (such as constant heat sinks from a cooling jacket and inleakage of ambient air, steady state feed-to-batch conversion heat, and a cold cap model with a simplified shape), it closely predicts the molten glass (1150°C and 1175°C) and plenum temperatures (550°C) obtained from thermocouples during two pilot-scale tests, with an average cold cap coverage of 80%. Additional simulations were performed to explore the sensitivity of the predicted plenum temperatures to variations in cold cap coverage (fraction of melt surface covered by the glass batch) and batch emissivity. The plenum temperature was found to be in the range of 606°C when cold cap coverage decreased from 95% to 70%. Cold cap emissivity had a smaller effect, increasing the plenum temperature by as much as 179°C when cold cap emissivity increased from 0.2 to 0.8. Maintaining a high cold cap coverage without overfeeding is important for a sustained melter operation with high glass throughput. This work provides a tool for achieving that goal in terms of correlating the plenum temperature with the cold cap coverage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗