Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRAINS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Emergent symmetry in TbTe 3 revealed by ultrafast reflectivity under anisotropic strain

Here, we report ultrafast reflectivity measurements of the dynamics of the order parameter of the charge density wave (CDW) in TbTe 3 under anisotropic strain. We observe an increase in the frequency of the amplitude mode with increasing tensile strain along the a-axis (which drives the lattice into a > c, with a and c the lattice constants), and similar behavior for tensile strain along c (c > a). This suggests that both strains stabilize the corresponding CDW order and further support the near equivalence of the CDW phases oriented in a- and c-axis, in spite of the orthorhombic space group. The results were analyzed within the time-dependent Ginzburg–Landau framework, which agrees well with the reflectivity dynamics. Our study presents an ultrafast approach to assess the stability of phases and order parameter dynamics in strained systems.

Kim, Soyeun↗
DOE OSTI2024

Elastic-plastic conductor damage evaluation at over 0.4% strain using a high-stress REBCO coil

Abstract Recent reports on screening current stress simulations of high-field REBCO magnets frequently present peak stresses over 1 GPa. However, this result is probably an unrealistic artifact of purely elastic calculations, considering the macroscopic yield and fracture stresses of approximately 900 MPa and less than 1.1 GPa for Hastelloy substrate-coated conductors. Here, we evaluate elastic-plastic conductor damage at over 0.4% strain using a high-stress REBCO coil exposed to a high field to explore this elastic-plastic regime. The coil was located off-center in a low-temperature superconductor magnet so as to induce a significant screening current in the enhanced radial field. Voltage taps, a Hall sensor, and two strain gauges were used for the instrumentation. We obtained strains exceeding 0.4% near the outward edge during the coil current charge from 350 A to 390 A, where the coil was exposed to external axial and radial magnetic fields of 13 T and 0.5 T. Post mortem results showed wavy plastic deformation, electrical damage, and REBCO defects. An elastic-plastic simulation reproduced the measured strains and predicted that ∼1 GPa stress is sufficient to induce ∼0.9% strain, thus validating our initial concerns with purely elastic models. This paper provides our experimental and simulation results.

Bang, Jeseok (ORCID:0000000247616334)↗
DOE OSTI2023

In-plane uniaxial-strain tuning of superconductivity and charge-density wave in CsV 3 Sb 5

The kagome superconductor CsV 3 Sb 5 with exotic electronic properties has attracted substantial research interest, and the interplay between the superconductivity and the charge-density wave is crucial for understanding its unusual electronic ground state. In this work, we performed resistivity and AC magnetic susceptibility measurements on CsV 3 Sb 5 single crystals uniaxially-strained along [100] and [110] directions. We find that the uniaxial-strain tuning effect ofT c (dT c /dε) andT CDW (dT CDW /dε) are almost identical along these distinct high-symmetry directions. These findings suggest the in-plane uniaxial-strain-tuning ofT c andT CDW in CsV 3 Sb 5 are dominated by associatedc-axis strain, whereas the response to purely in-plane strains is likely small.

Physics↗
DOE OSTI2020

Escherichia coli amino acid auxotrophic expression host strains for investigating protein structure–function relationships

Abstract A set of C43(DE3) and BL21(DE3) Escherichia coli host strains that are auxotrophic for various amino acids is briefly reviewed. These strains require the addition of a defined set of one or more amino acids in the growth medium, and have been specifically designed for overproduction of membrane or water-soluble proteins selectively labelled with stable isotopes, such as 2H, 13C and 15N. The strains described here are available for use and have been deposited into public strain banks. Although they cannot fully eliminate the possibility of isotope dilution and mixing, metabolic scrambling of the different amino acid types can be minimized through a careful consideration of the bacterial metabolic pathways. The use of a suitable auxotrophic expression host strain with an appropriately isotopically labelled growth medium ensures high levels of isotope labelling efficiency as well as selectivity for providing deeper insight into protein structure–function relationships.

Biochemistry & Molecular Biology↗
DOE OSTI2023

Antibacterial and antioxidant activities of Streptomyces sp. strain FR7 isolated from forest soil

Abstract Actinomycetes produce secondary metabolites with many bioactivities such as antimicrobial, which can be useful as alternatives against resistant bacterial strains. Therefore, the screening of new habitats is likely to provide new strains with high potential. In this work, the antimicrobial capacity was used to select Streptomyces sp. strains isolated from Raf Raf forest (Tunisia). From the strain displaying higher activity, FR7, an ethyl acetate extract was prepared under optimized culturing conditions (10 days at 30°C in ISP2 medium with initial pH 8), showing significant antimicrobial activity against Micrococcus luteus and Staphylococcus aureus (MIC = 5 μg ml−1), and Listeria monocytogenes and Pseudomonas aeruginosa (MIC = 20 μg ml−1). The extract displayed strong DPPH radical scavenging activity (IC50 = 1.3 μg ml−1) and protection of yeast cells from H2O2-induced oxidative stress determined by flow cytometry with dichlorofluorescein diacetate. The crude extract showed the presence of polyketides, with methylsalicylic acid as moiety, a large and diverse group of secondary metabolites with a wide range of bioactivities, including antioxidant and antibacterial. Based on 16S RNA gene sequences, strain FR7 was identified as belonging to genus Streptomyces with high resemblance to S. iakyrus. Streptomyces sp. FR7 has great potential as a source of antibacterial and antioxidant metabolites.

Weslati, Imen↗
DOE OSTI2024

High-throughput quantification of quasistatic, dynamic and spall strength of materials across 10 orders of strain rates

Abstract The response of metals and their microstructures under extreme dynamic conditions can be markedly different from that under quasistatic conditions. Traditionally, high strain rates and shock stresses are achieved using cumbersome and expensive methods such as the Kolsky bar or large spall experiments. These methods are low throughput and do not facilitate high-fidelity microstructure–property linkages. In this work, we combine two powerful small-scale testing methods, custom nanoindentation, and laser-driven microflyer (LDMF) shock, to measure the dynamic and spall strength of metals. The nanoindentation system is configured to test samples from quasistatic to dynamic strain-rate regimes. The LDMF shock system can test samples through impact loading, triggering spall failure. The model material used for testing is magnesium alloys, which are lightweight, possess high-specific strengths, and have historically been challenging to design and strengthen due to their mechanical anisotropy. We adopt two distinct microstructures, solutionized (no precipitates) and peak-aged (with precipitates) to demonstrate interesting upticks in strain-rate sensitivity and evolution of dynamic strength. At high shock-loading rates, we unravel an interesting paradigm where the spall strength vs. strain rate of these materials converges, but the failure mechanisms are markedly different. Peak aging, considered to be a standard method to strengthen metallic alloys, causes catastrophic failure, faring much worse than solutionized alloys. Our high-throughput testing framework not only quantifies strength but also teases out unexplored failure mechanisms at extreme strain rates, providing valuable insights for the rapid design and improvement of materials for extreme environments.

Eswarappa Prameela, Suhas (ORCID:0000000334530184)↗
DOE OSTI2025

Ab initio study of strain-driven vacancy clustering in aluminum

Here, we present a first-principles investigation of strain-driven vacancy clustering in aluminum. Specifically, we perform Kohn-Sham density functional theory calculations to study the influence of hydrostatic strains on clustering in tri-, quad-, and heptavacancies. We find that compressive strains are a key driving force for vacancy aggregation, particularly for collapse of clusters on the (111) plane, consistent with prior experimental observations of vacancy clusters on this plane. Notably, we find that the heptavacancy on the (111) plane collapses to form a prismatic dislocation loop for hydrostatic compressive strains exceeding 5%, highlighting the critical role of such strains in prismatic dislocation loop nucleation in aluminum.

Physics - Condensed matter physics↗
DOE OSTI2020

Controlling symmetry of spin-orbit entangled pseudo spin state through uniaxial strain

In layer-structured Sr 2 IrO 4 , strong crystal electric field and spin-orbit coupling result in an intriguing spin-orbit entangled J eff =1/2 state, resembling the spin S=1/2 state of high-temperature superconducting cuprates. Our study unravels the intricate relationship between the lattice and the pseudospin interactions using uniaxial strain. Applied along the [1 1 0] direction, a compressive strain does not induce any effect. In contrast, the strain along [1 0 0] triggers a dramatic detwinning of the magnetic domains bringing the system to a single domain at around 0.04% strain. The strain driven detwinning rate is temperature independent showing that it does not exhibit a spontaneous orthorhombic lattice distortion driven by the pseudo-Jahn-Teller effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Uniaxial Néel vector control in perovskite oxide thin films by anisotropic strain engineering

Antiferromagnetic (AF) thin films typically exhibit a multidomain state, and control of the AF Néel vector is challenging, as AF materials are robust to magnetic perturbations. In this paper, uniaxial Néel vector control is demonstrated by relying on anisotropic strain engineering of epitaxial thin films of the prototypical AF material LaFeO 3 (LFO). Orthorhombic (011)- and (101)-oriented DyScO 3 , GdScO 3 , and NdGaO 3 substrates are used to engineer different anisotropic in-plane strain states. The anisotropic in-plane strain stabilizes structurally monodomain monoclinic LFO thin films. The uniaxial Néel vector is found along the tensile strained b axis, contrary to bulk LFO having the Néel vector along the shorter a axis, and no magnetic domains are found. Hence, anisotropic strain engineering is a viable tool for designing unique functional responses, further enabling AF materials for mesoscopic device technology.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Energy Transfer from Large to Small Scales in Turbulence by Multiscale Nonlinear Strain and Vorticity Interactions

An intrinsic feature of turbulent flows is an enhanced rate of mixing and kinetic energy dissipation due to the rapid generation of small-scale motions from large-scale excitation. The transfer of kinetic energy from large to small scales is commonly attributed to the stretching of vorticity by the strain rate, but strain self-amplification also plays a role. Previous treatments of this connection are phenomenological or inexact, or cannot distinguish the contribution of vorticity stretching from that of strain self-amplification. In this Letter, an exact relationship is derived which quantitatively establishes how intuitive multiscale mechanisms such as vorticity stretching and strain self-amplification together actuate the interscale transfer of energy in turbulence. Further, numerical evidence verifies this result and uses it to demonstrate that the contribution of strain self-amplification to energy transfer is higher than that of vorticity stretching, but not overwhelmingly so.

42 ENGINEERING↗
DOE OSTI2026

Tuning of altermagnetism by strain

For all collinear altermagnets, we sort out piezomagnetic free-energy invariants allowed in the nonrelativistic limit and relativistic piezomagnetic invariants bilinear in the Néel vector $\mathbf{L}$ and magnetization $\mathbf{M}$, which include strain-induced Dzyaloshinskii-Moriya interaction. The symmetry-allowed responses are fully determined by the nonrelativistic spin Laue group. In the nonrelativistic limit, two distinct mechanisms are discussed: the band-filling mechanism, which exists in metals and is illustrated using the simple two-dimensional Lieb lattice model, and the temperature-dependent exchange-driven mechanism, which is illustrated using first-principles calculations for transition-metal fluorides. The leading second-order nonrelativistic term in the strain-induced magnetization is also obtained for CrSb. Piezomagnetism due to the strain-induced Dzyaloshinskii-Moriya interaction is calculated from first principles for transition-metal fluorides, MnTe, and CrSb. Finally, we discuss triplet superconducting correlations supported by altermagnets and protected by inversion rather than time-reversal symmetry. We apply the nonrelativistic classification of Cooper pairs to describe the interplay between strain and superconductivity in the two-dimensional Lieb lattice and in bulk rutile structures. Here, we show that triplet superconductivity is, on average, unitary in an unstrained altermagnet, but becomes non-unitary under piezomagnetically active strain.

FOS: Physical sciences↗
DOE OSTI2021

Significance of lysogeny for the metabolism of Desulfovibrio spp. strains isolated from aquatic environments of Georgia

Sulphate-reducing bacteria (SRB) are ecologically important group of anaerobic micro-organisms that can reduce sulphate to form hydrogen sulphide-a toxic gas causing iron corrosion on metal surfaces. In this work, SRB strains were isolated from aquatic environments in the country of Georgia to determine their lysogenicity and the role of temperate phages in host metabolism. SRB strains were isolated in samples from the Black Sea coast of Georgia. Based on their genetic, cytological and physiological properties of bacteria, 10 Georgian isolates were assigned to the genus Desulfovibrio. Temperate bacteriophages were induced from three out of ten strains by UV-exposure. Comparison of metal (Fe and Cr) reduction and utilization of various carbon sources by the wild-type (lysogenic) bacterial strains and their UV-irradiated counterparts was done. Temperate phage in the cells of SRB could alter significant functions of bacteria and may have a contribution in the acquisition of different traits by SRB. This article pointed to a significant role for temperate bacteriophages in the metabolism and metabolic potential of host strains of SRB, which were first isolated from the aquatic environment of Georgia.

temperate phage↗
DOE OSTI2022

Combined thermographic phosphor and digital image correlation (TP + DIC) for simultaneous temperature and strain measurements

We report thermographic phosphors (TP) are combined with stereo digital image correlation (DIC) in a novel diagnostic, TP + DIC, to measure full-field surface strains and temperatures simultaneously. The TP + DIC method is presented, including corrections for nonlinear CMOS camera detectors and generation of pixel-wise calibration curves to relate the known temperature to the ratio of pixel intensities between two distinct wavelength bands. Additionally, DIC is employed not only for strain measurements but also for accurate image registration between the two cameras for the two-colour ratio method approach of phosphoric thermography. TP + DIC is applied to characterize the thermo-mechanical response of 304L stainless steel dog bones during tensile testing at different strain rates. The dog bones are patterned for DIC with Mg 3 F 2 GeO 4 :Mn (MFG) via aerosol deposition through a shadow mask. Temperatures up to 425°K (150°C) and strains up to 1.0 mm/mm are measured in the localized necking region, with conservative noise levels of 10°K and 0.01 mm/mm or less. Finally, TP + DIC is compared to the more established method of combining infrared (IR) thermography with DIC (IR + DIC), with results agreeing favourably. Three topics of continued research are identified, including cracking of the aerosol-deposited phosphor DIC features, incomplete illumination for pixels on the border of the phosphor features, and phosphor emission evolution as a function of applied substrate strain. This work demonstrates the combination of phosphor thermography and DIC and lays the foundation for further development of TP + DIC for testing in combined thermo-mechancial environments.

304L stainless steel↗
DOE OSTI2020

Strain-dependent luminescence and piezoelectricity in monolayer transition metal dichalcogenides

The modification of optical and electronic properties of transition metal dichalcogenides via mechanical deformation has been widely studied. Their ability to withstand large deformations before rupture has enabled large tunability of the bandgap, and further, the spatially varying strain has been shown to control the spatial distribution of the bandgap and lead to effects such as carrier funneling. Monolayer transition metal dichalcogenides exhibit a significant piezoelectric effect that could couple to a spatially inhomogeneous strain distribution to influence electronic and optical behavior. We investigate both experimentally and theoretically an example case of photoluminescence in structures with a strain distribution similar to that employed in single-photon emitters but generated here via nanoindentation. Using a mechanical model for strain induced by nanoindentation, we show that piezoelectricity can result in charge densities reaching 10 12 e/cm 2 and can generate electrostatic potential variations on the order of ±0.1 V across the suspended monolayer. We analyze the implications of these results for luminescence and exciton transport in monolayer transition metal dichalcogenides with spatially varying strain.

42 ENGINEERING↗
DOE OSTI2024

Strain shift measured from stress-controlled oscillatory shear: Evidence for a continuous yielding transition and new techniques to determine recovery rheology measures

Understanding the yielding of complex fluids is an important rheological challenge that affects our ability to engineer and process materials for a wide variety of applications. Common theoretical understandings of yield stress fluids follow the Oldroyd–Prager formalism in which the material behavior below the yield stress is treated as solidlike, and above the yield stress as liquidlike, with an instantaneous transition between the two states. This formalism was built on a quasi-static approach to the yield stress, while most applications, ranging from material processing to end user applications, involve a transient approach to yielding over a finite timescale. Using stress-controlled oscillatory shear experiments, we show that yield stress fluids flow below their yield stresses. This is quantified through measuring the strain shift, which is the value about which the strain oscillates during a stress-controlled test and is a function of only the unrecoverable strain. Measurements of the strain shift are, therefore, measurements of flow having taken place. These experimental results are compared to the Herschel–Bulkley form of the Saramito model, which utilizes the Oldroyd–Prager formalism, and the recently published Kamani–Donley–Rogers (KDR) model, in which one constitutive equation represents the entire range of material responses. Scaling relationships are derived, which allow us to show why yield stress fluids will flow across all stresses, above and below their yield stress. Finally, derivations are presented that show strain shift can be used to determine average metrics previously attainable only through recovery rheology, and these are experimentally verified.

Mechanics↗
DOE OSTI2020

Extreme tensile strain states in La 0.7 Ca 0.3 MnO 3 membranes

A defining feature of emergent phenomena in complex oxides is the competition and cooperation between ground states. In manganites, the balance between metallic and insulating phases can be tuned by the lattice; extending the range of lattice control would enhance the ability to access other phases. We stabilized uniform extreme tensile strain in nanoscale La 0.7 Ca 0.3 MnO 3 membranes, exceeding 8% uniaxially and 5% biaxially. Uniaxial and biaxial strain suppresses the ferromagnetic metal at distinctly different strain values, inducing an insulator that can be extinguished by a magnetic field. Electronic structure calculations indicate that the insulator consists of charge-ordered Mn 4+ and Mn 3+ with staggered strain-enhanced Jahn-Teller distortions within the plane. This highly tunable strained membrane approach provides a broad opportunity to design and manipulate correlated electron states.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Phenotypic and genomic characterization of Methanothermobacter wolfeii strain BSEL, a CO 2 -capturing archaeon with minimal nutrient requirements

A new variant of Methanothermobacter wolfeii was isolated from an anaerobic digester using enrichment cultivation in anaerobic conditions. Here, the new isolate was taxonomically identified via 16S rRNA gene sequencing and tagged as M. wolfeii BSEL. The whole genome of the new variant was sequenced and de novo assembled. Genomic variations between the BSEL strain and the type strain were discovered, suggesting evolutionary adaptations of the BSEL strain that conferred advantages while growing under a low concentration of nutrients. M. wolfeii BSEL displayed the highest specific growth rate ever reported for the wolfeii species (0.27 ± 0.03 h –1 ) using carbon dioxide (CO 2 ) as unique carbon source and hydrogen (H 2 ) as electron donor. M. wolfeii BSEL grew at this rate in an environment with ammonium (NH 4 + ) as sole nitrogen source. The minerals content required to cultivate the BSEL strain was relatively low and resembled the ionic background of tap water without mineral supplements. Optimum growth rate for the new isolate was observed at 64°C and pH 8.3. In this work, it was shown that wastewater from a wastewater treatment facility can be used as a low-cost alternative medium to cultivate M. wolfeii BSEL. Continuous gas fermentation fed with a synthetic biogas mimic along with H 2 in a bubble column bioreactor using M. wolfeii BSEL as biocatalyst resulted in a CO 2 conversion efficiency of 97% and a final methane (CH 4 ) titer of 98.5%v, demonstrating the ability of the new strain for upgrading biogas to renewable natural gas.

09 BIOMASS FUELS↗
DOE OSTI2023

Heterogeneity and Recombination of Foot-and-Mouth Disease Virus during Multi-Strain Coinfection of Cattle

Superinfection of cattle persistently infected with foot-and-mouth disease virus (FMDV), with a heterologous FMDV strain has been shown to generate novel recombinant viruses. In this study, we investigated the pathogenesis events within specific tissues associated with FMDV coinfections in cattle subjected to either simultaneous or serial exposure to two distinct strains of FMDV. Both strains of FMDV (one each of serotypes O and A) were similarly localized to the nasopharyngeal mucosa during the early stages of infection. However, while no recombinant FMDV genomes were recovered from simultaneously coinfected cattle, interserotypic recombinants were isolated from nasopharyngeal tissue samples obtained at 48 h after heterologous superinfection of a persistently infected FMDV carrier. Additionally, analysis of FMDV genomes obtained from replicate nasopharyngeal tissue samples demonstrated that adjacent segments of the mucosa were sometimes infected by distinct viruses, demonstrating a multifocal and heterogeneous distribution of FMDV infection during primary and persistent phases of infection. Furthermore, this work indicates that superinfection of FMDV carriers may be an important source of emergent recombinant strains of FMDV in areas where multiple strains are co-circulating.

60 APPLIED LIFE SCIENCES↗