Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Differentiation of Asteroid 4 Vesta: Core Formation by Iron Rain in a Silicate Magma Ocean

Geochemical observations of the eucrite and diogenite meteorites, together with observations made by NASA's Dawn spacecraft while orbiting asteroid 4 Vesta, suggest that Vesta resembles H chondrites in bulk chemical composition, possible with about 25 percent of a CM-chondrite like composition added in. For this model, the core is 15 percent by mass (or 8 percent by volume) of the asteroid, with a composition of 73.7 percent by weight Fe, 16.0 percent by weight S, and 10.3 percent by weight Ni. The abundances of moderately siderophile elements (Ni, Co, Mo, W, and P) in eucrites require that essentially all of the metallic phase in Vesta segregated to form a core prior to eucrite solidification. The combination of the melting phase relationships for the silicate and metal phases, together with the moderately siderophile element concentrations together require that complete melting of the metal phase occurred (temperature is greater than1350 degrees Centigrade), along with substantial (greater than 40 percent) melting of the silicate material. Thus, core formation on Vesta occurs as iron rain sinking through a silicate magma ocean.

Kiefer, Walter S.↗

Anionic Pt in Silicate Melts at Low Oxygen Fugacity: Speciation, Partitioning and Implications for Core Formation Processes on Asteroids

Most siderophile element concentrations in planetary mantles can be explained by metal/ silicate equilibration at high temperature and pressure during core formation. Highly siderophile elements (HSE = Au, Re, and the Pt-group elements), however, usually have higher mantle abundances than predicted by partitioning models, suggesting that their concentrations have been set by late accretion of material that did not equilibrate with the core. The partitioning of HSE at the low oxygen fugacities relevant for core formation is however poorly constrained due to the lack of sufficient experimental constraints to describe the variations of partitioning with key variables like temperature, pressure, and oxygen fugacity. To better understand the relative roles of metal/silicate partitioning and late accretion, we performed a self-consistent set of experiments that parameterizes the influence of oxygen fugacity, temperature and melt composition on the partitioning of Pt, one of the HSE, between metal and silicate melts. The major outcome of this project is the fact that Pt dissolves in an anionic form in silicate melts, causing a dependence of partitioning on oxygen fugacity opposite to that reported in previous studies.

Medard, E.↗

Microstructural Study of an 18-O-Poor Presolar Silicate Grain from The Meteorite Hills 00426 Cr2 Chondrite

The majority of presolar silicate and oxide grains derive from low-mass red giant and asymptotic giant branch (AGB) stars of approximately solar metallicity (Z). A small subclass of presolar O-rich grains (less than 7%) is thought to originate from stars having lower-than-solar Z. These "Group 3" [1] grains have depletions in 18O and 17O that typically fall along or above the Galactic chemical evolution (GCE) line. Other Group 3 grains show greater 17O than 18O depletions and most likely have supernova (SN) origins. Owing to their rarity, only two Group 3 silicates have been mineralogically examined in detail [2, 3]. Here we present a mineralogical study of a Group 3 presolar silicate to explore its formation conditions and interstellar history.

Nguyen, A. N.↗

Climates of Warm Earth-like Planets. II. Rotational "Goldilocks" Zones for Fractional Habitability and Silicate Weathering

Planetary rotation rate has a significant effect on atmospheric circulation, where the strength of the Coriolis effect in part determines the efficiency of latitudinal heat transport, altering cloud distributions, surface temperatures, and precipitation patterns. In this study, we use the ROCKE-3D dynamic ocean general circulation model to study the effects of slow rotations and increased insolations on the "fractional habitability" and silicate weathering rate of an Earth-like world. Defining the fractional habitability f(sub h) to be the percentage of a planet's surface that falls in the 0 ≤ T ≤ 100 °C temperature regime, we find a moderate increase in f(sub h) with a 10% and 20% increase in insolation and a possible maximum in f(sub h) at sidereal day lengths between 8 and 32 times that of the modern Earth. By tracking precipitation and runoff, we further determine that there is a rotational regime centered on a 4 day period in which the silicate weathering rate is maximized and is particularly strongly peaked at higher overall insolations. Because of weathering's integral role in the long-term carbonate–silicate cycle, we suggest that climate stability may be strongly affected by the anticipated rotational evolution of temperate terrestrial-type worlds and should be considered a major factor in their study. In light of our results, we argue that planetary rotation period is an important factor to consider when determining the habitability of terrestrial worlds.

Atmospheric effects↗

Relative Sputtering Rates of FeS, MgS, and Mg Silicates: Implications for ISM Gas Phase Depletions of Rock-Forming Elements

Astronomical measurements of S abundances in the diffuse interstellar medium (ISM) indicate ionized S is a dominant species with little (< 5%) S residing in grains (e.g. Jenkins 2009). This is an enigmatic result, given that abundant Fe-sulfide grains are observed in dust around pre- and post-main sequence stars and are also observed as major components of primitive meteoritic and cometary samples. These disparate observations suggest that the lifetime of sulfide grains in the ISM is short because of destruction processes. Our previous work has shown that FeS and MgS retain their crystallinity and do not amorphize during radiation processing, whereas enstatite and forsterite are readily amorphized. We have extended this study to measure the relative sputtering rates of FeS and MgS compared to enstatite and forsterite. Irradiation of FeS with 4 keV He+ results in preferential sputtering of S and the formation of a thin 2-3 nm, compact Fe metal layer that armors the surface. The zone of S loss extends to a depth of ~8-10 nm below the exposed surface. Despite this S loss, the FeS retains its crystallinity and shows no sign of incipient amorphization. Irradiation of FeS with 5kV Ga+ in a focused ion beam (FIB) instrument resulted in preferential sputtering of S and the formation of a 5-8-nm thick surface layer of nanophase Fe metal. X-ray mapping shows that the zone of S sputtering extends to a depth of nearly 20 nm, but there is no evidence for FeS amorphization, consistent with our previous work. The irradiation experiments show that the relative sputtering rate of FeS and MgS are much higher than olivine or enstatite. Sputtering experiments utilizing 30 kV and 5 kV Ga ions in the FIB produced volume loss in troilite that was ~4X greater than in enstatite or forsterite. The sputter yield under these conditions is such that for every Si atom sputtered from enstatite, ~14 S atoms are sputtered from FeS. We have performed similar sputtering experiments on Fe-bearing niningerite (MgS) and co-existing enstatite from the ALH 84170 EH3 chondrite. MgS also sputters much more rapidly than enstatite with a relative Si:S sputter yield of 1:8. For MgS, sulfur is highly depleted at the surface and the S-depletion zone extends to a depth of ~15 nm (using 5 kV Ga+). There is a corresponding zone of Mg and especially Fe enrichment that extends from 5 to ~10 nm below the surface, respectively. The dominant grain destruction mechanism in the ISM is sputtering from passage of supernova-generated shock waves. This process also results in the amorphization of crystalline silicates in the ISM. Our results indicate that FeS and MgS grains produced in evolved stars and injected into the ISM will be destroyed more rapidly than crystalline silicates. This process may account for the lack of significant depletion of S from the gas phase in the ISM. However, rare nanophase FeS grains occur as inclusions in circumstellar amorphous silicate grains found in comet dust particles analyzed in the laboratory. These results show that a finite amount of S in the ISM is sequestered in solid grains.

SPUTTERING RATES↗

Climates of Warm Earth-like Planets. II. Rotational "Goldilocks" Zones for Fractional Habitability and Silicate Weathering

Planetary rotation rate has a significant effect on atmospheric circulation, where the strength of the Coriolis effect in part determines the efficiency of latitudinal heat transport, altering cloud distributions, surface temperatures, and precipitation patterns. In this study, we use the ROCKE-3D dynamic ocean general circulation model to study the effects of slow rotations and increased insolations on the "fractional habitability" and silicate weathering rate of an Earth-like world. Defining the fractional habitability f (h) to be the percentage of a planet's surface that falls in the 0 ≤ T ≤ 100 °C temperature regime, we find a moderate increase in f (h) with a 10% and 20% increase in insolation and a possible maximum in f (h) at sidereal day lengths between 8 and 32 times that of the modern Earth. By tracking precipitation and runoff, we further determine that there is a rotational regime centered on a 4 day period in which the silicate weathering rate is maximized and is particularly strongly peaked at higher overall insolations. Because of weathering's integral role in the long-term carbonate–silicate cycle, we suggest that climate stability may be strongly affected by the anticipated rotational evolution of temperate terrestrial-type worlds and should be considered a major factor in their study. In light of our results, we argue that planetary rotation period is an important factor to consider when determining the habitability of terrestrial worlds.

atmospheric effects↗

Quantative Measurements of Trace Elements and Three-Dimensional Atomic Scale Characterisation of Presolar O-rich Oxides and Silicates: An Atom Probe Tomography Approach

Presolar grains are recordsof a single moment in stellar evolution which have survived nebula and parent body processingwithin our Solar System. These grains condensed within a range of stellar envi-ronments including asymptotic giant branch stars, red giant branch stars, nova, supernova (SN) and hydrogen burning electron capture supernova(ECSN)[1,2]. Iso-topic and chemical compositions can be used to unravel details about environmental conditions at the time of their condensation and physical and chemical processes occurring at the time. For example,nucleosynthesis, stellar evolution, physical properties of stellar atmos-pheres, mixing from inner core to outer envelope, galac-tic chemical evolution, interstellar medium and parent body processing.NanoSIMS enables detailed characterisation of iso-topic compositions and rapid in situidentification of O-rich presolar oxides and silicates using their character-istic 17O/16O and 18O/16O isotopic ratios.Spectroscopic techniques e.g., auger spectroscopyand transmission electron microscopy, have provided additional details on major and minor chemical signatures. However, due tospatial resolution limitations,interaction volumes and interferencesfrom surrounding grains for in situtech-niques, attaining quantative characterisation of trace el-ements,hasproved challenging[1,3]. As the most sensitive geochemical tracers of envi-ronmental changes, trace elements are essential to un-ravelling the geochemical record of their parent stellar environments and evolutionary pathways[4].We car-ried out correlated in situisotopic and chemical analyses of 13 presolar grains to better understand stellar evolu-tion. In this work, we achieved this using a custom ap-proach, coordinating NanoSIMS, Scanning Electron Microscopy Energy Dispersive X-Ray Spectroscopy (SEM-EDX)and Atom Probe Tomography(APT).Our objective was to develop an approach which could ena-ble precise targeting of presolar grains for atom probe tomography and successfully execute atomic scale anal-yses of presolar oxides and silicates, to achieve quantative analysis of their trace elements for the first time.We also aimed to test the capability for Atom Probe tomography to measure isotopic compositions and stoichiometries of presolar oxide and silicate grains.

N D Nevill↗

Electrochemical production of metal hydroxide using metal silicates

Systems are described for dissolving metal silicates to: produce metal hydroxide; remove carbon dioxide or other acid gases from the atmosphere or other gas mixture by reacting such gases with the metal hydroxide; penetrate or excavate metal silicates; extract metals or silicon-containing compounds from metal silicates; and produce hydrogen and oxygen or other gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Li+ alumino-silicate ion source

To uniformly heat targets to electron-volt temperatures for the study of warm dense matter, one strategy is to deposit most of the ion energy at the peak of energy loss (dE/dx) with a low (E< 5 MeV) kinetic energy beam and a thin target[1]. Lower mass ions have a peak dE/dx at a lower kinetic energy. To this end, a small lithium (Li+) alumino-silicate source has been fabricated, and its emission limit has been measured. These surface ionization sources are heated to 1000-1150 C where they preferentially emit singly ionized alkali ions. Alumino-silicates sources of K+ and Cs+ have been used extensively in beam experiments, but there are additional challenges for the preparation of high-quality Li+ sources: There are tighter tolerances in preparing and sintering the alumino-silicate to the substrate to produce an emitter that gives uniform ion emission, sufficient current density and low beam emittance. We report on recent measurements ofhigh ( up to 35 mA/cm2) current density from a Li+ source. Ion species identification of possible contaminants is being verified with a Wien (E x B) filter, and via time-of-flight.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of magnesium on calcium silicate hydrate (C-S-H)

The addition of MgCl{sub 2} to synthetic calcium silicate hydrate (C-S-H) with Ca/Si = 0.8 lowers the pH values below 10. Experimental observations and thermodynamic calculations show the destabilization of C-S-H and the precipitation of magnesium silicate hydrate (M-S-H). In contrast, the addition of MgO to C-S-H increases the pH values up to 11.5 and the Ca/Si in C-S-H from 0.8 to ~ 1.0. At high pH, the formation of M-S-H and brucite is observed experimentally. Less brucite is present at 50 than at 20 °C indicating a slow dissolution kinetic of brucite at 20 °C. Thermodynamic modelling is in good agreement with the changes in C-S-H and M-S-H formation in the presence of MgO although no brucite is predicted. M-S-H is observed in the presence of both MgCl{sub 2} and MgO, is stable from pH 7.5 to 11.5 and has a structure comparable to the structure of M-S-H prepared from MgO and SiO{sub 2} only.

36 MATERIALS SCIENCE↗

Characterisation of magnesium silicate hydrate phases (M-S-H): A combined approach using synchrotron-based absorption-spectroscopy and ab initio calculations

The formation of magnesium-silicate-hydrate (M-S-H) phases has been observed at the interface between cement and argillaceous rock formations. In this study the atomic structure of M-S-H and magnesium-calcium-silicate-hydrate (M-C-S-H, a mixing with Ca) was performed by Mg K-edge X-ray absorption spectroscopy combined with ab-initio calculations. The results show that all magnesium containing phases have a TOT phyllosilicate structure with silica defects creating end of silica chains and an interlayer composed of Mg bound to hydroxide groups. Significant differences are observable between the M-S-H and the M-C-S-H. Firstly, the M-C-S-H phases have an enlarged structure compared to the M-S-H phases. Secondly, the results indicate that at least two geometrically distinct Mg octahedral sites are present for all phases. It is concluded that the Mg octahedra are attached to both Si tetrahedra in a manner similarly to that in talc and, to hydroxide groups in a manner similar to that in brucite.

36 MATERIALS SCIENCE↗

Dynamical behaviors of structural, constrained and free water in calcium- and magnesium-silicate-hydrate gels

We present the hypothesis that the mechanical properties of cement pastes depend strongly on their porosities. In a saturated paste, the porosity links to the free water volume after hydration. Structural water, constrained water, and free water have different dynamical behavior. Hence, it should be possible to extract information on pore system by exploiting the water dynamics. With our experiments we investigated the slow dynamics of hydration water confined in calcium- and magnesium-silicate-hydrate (C-S-H and M-S-H) gels using high-resolution quasi-elastic neutron scattering (QENS) technique. C-S-H and M-S-H are the chemical binders present in calcium rich and magnesium rich cements. We measured three M-S-H samples: pure M-S-H, M-S-H with aluminum-silicate nanotubes (ASN), and M-S-H with carboxyl group functionalized ASN (ASN-COOH). A C-S-H sample with the same water content (i.e. 0.3) is also studied for comparison. We found that structural water in the gels contributes to the elastic component of the QENS spectrum, while constrained water and free water contribute the quasi-elastic component. The quantitative analysis suggests that the three components vary for different samples and indicate the variance in the system porosity, which controls the mechanical properties of cement pastes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic analysis of Eu{sup 3+} -and Eu{sup 3+}:Yb{sup 3+}-doped yttrium silicate crystalline powders prepared by combustion synthesis

Yttrium silicate powders doped with Eu{sup 3+} and codoped with Eu{sup 3+} and Yb{sup 3+} were prepared by combustion synthesis. The x-ray powder diffraction data showed the presence of Y{sub 2}SiO{sub 5} and Y{sub 2}Si{sub 2}O{sub 7} crystalline phases. Singly doped (1 wt %) sample illuminated with ultraviolet light ({lambda}=256 nm) showed the characteristic red luminescence corresponding to {sup 5}D{sub 0}{yields}{sup 7}F{sub J} transitions of Eu{sup 3+}. The Judd-Ofelt intensity parameters were calculated from experimental data and the radiative and nonradiative relaxation rates were estimated. The results showed that the nonradiative relaxation rate is smaller in yttrium silicate compared to yttrium oxide powder, a reference material, prepared under similar conditions. Codoped samples were exposed to near-infrared laser excitation ({lambda}=975 nm) and the red luminescence of Eu{sup 3+} was also observed. In this case, the luminescence is achieved due to a cooperative upconversion (CUC) process involving energy transfer (ET) from pairs of ytterbium ions to europium ions. The ET rate was estimated by fitting a rate equation model with the dynamics of CUC red emission.

36 MATERIALS SCIENCE↗

THE EFFECT OF HEAVY COSMIC-RAY IONS ON SILICATE GRAINS IN THE INTERSTELLAR DUST

Electronmicroscopic samples of crystalline Mg{sub 2}SiO{sub 4} forsterite were irradiated by energetic Ar, Fe, Kr, and Xe ions at room temperature. Tracks with a mean radius R{sub e} = 1.36 nm were observed after irradiation by 56 MeV Fe ions, while no tracks were induced by a 48 MeV Ar beam. Amorphization of forsterite grains by cosmic-ray (CR) Fe ions are discussed, including the effects of low temperature, ion velocity, and ion-induced crystallization. CR Fe ions induce amorphous tracks in crystalline forsterite only in the range 40-140 MeV, and the period of time for complete amorphization is tau{sub cr} approx 13,400 Myr. Our estimate is tau{sub cr} approx 1300 Myr for enstatite. Thus, heavy CR particles do not reduce the crystallinity of silicate grains within a reasonable time, as supposed previously. However, energetic ions can induce crystallization in amorphous solids, and this may be partially or fully responsible for the estimated 0.2% crystallinity of silicates in the interstellar medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Solid-Phase Interaction of Uranium Tetrafluoride with Aluminum Silicates

The influence of the phase and chemical compositions of two aluminum silicate minerals – bentonite and kaolinite – on the solid-phase conversion of depleted uranium tetrafluoride into U {sub 3} O {sub 8} was investigated. It is shown that after their preliminary preparation by heat treatment or mechanical activation aluminum silicates can be used as reagents alternative to silica.

36 MATERIALS SCIENCE↗

Interactions between zirconia–yttria–tantala thermal barrier oxides and silicate melts

The effects of TaO 2.5 additions to Y 4 Zr 3 O 12 (YZO) on its interactions with calcium-magnesium alumino-silicate (CMAS) melts are investigated herein. YZO is a candidate material for the protection of novel ZrO 2 -YO 1.5 -TaO 2.5 based thermal barrier coatings (TBCs) against CMAS attack, but thermochemical considerations dictate that YZO contain TaO 2.5 for interfacial compatibility. Oxides based on Y 4 Zr 3-x Ta x O 12+0.5x ( x = =0, 0.7, 1.4) were mixed with various ternary and quinary silicate compositions ranging in Ca:Si ratio from 0.35 to 1.13 and equilibrated at 1300 °C. The results show that all combinations form the desired apatite phase except for the mixture of the higher Ta 5+ content with the lowest Ca:Si melt. It is found that the addition of Ta 5+ increases the capture of Y 3+ by the reprecipitated fluorite, decreasing the amount available to form apatite and eventually suppressing it at low Ca:Si. The effect is ascribed to the attractive interactions between Y 3+ and Ta 5+ in solid solution, similar to that found in tetragonal zirconia, but with concurrent incorporation of anion vacancies associated with excess Y 3+ that stabilize the cubic form. As the Ca 2+ content of the melt increases, so does the amount of Ca 2+ incorporated in fluorite. The latter also interacts attractively with Ta 5+ and leads to a reduction of captured Y 3+ in fluorite as the Ca content in the reacting deposit increases. This serves to increase the amount of Y 3+ available in the melt to form apatite in TBC-CMAS interactions.

36 MATERIALS SCIENCE↗

Mechanical Characterization of Low Modulus Polymer-Modified Calcium-Silicate-Hydrate (C-S-H) Binder

Calcium-silicate-hydrate (C-S-H) represents a key microstructural phase that governs the mechanical properties of concrete at a large scale. Defects in the C-S-H phase are also responsible for the poor ductility and low tensile strength of concrete. Manipulating the microstructure of C-S-H can lead to new cementitious materials with improved structural performance. This paper presents an experimental investigation aiming to characterize a new synthetic polymer-modified synthetic calcium-silicate-hydrate (C-S-H)/styrene-butadiene rubber (SBR) binder. The new C-S-H/SBR binder is produced by calcining calcium carbonate and mixing this with fumed silica (SiO 2 ), deionized water and SBR. Mechanical, physical, chemical and microstructural characterization was conducted to measure the properties of new hardened C-S-H binder. Results from the experimental investigation demonstrate the ability to engineer a new C-S-H binder with low elastic modulus and improved toughness and bond strength by controlling the SBR content and method of C-S-H synthesis. The new binder suggests the possible development of a new family of low-modulus silica-polymer binders that might fit many engineering applications such as cementing oil and gas wells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the nature of structural disorder in calcium silicate hydrates with a calcium/silicon ratio similar to tobermorite

Four calcium silicate hydrates (C-S-H) with structural calcium/silicon (Ca/Si) ratios ranging from 0.82 ± 0.02 to 0.87 ± 0.02 were synthesized at room temperature, 50, 80, and 110 °C. Their structure was elucidated by collating information from electron probe micro-analysis, transmission electron microscopy, extended X-ray absorption fine structure spectroscopy, and powder X-ray diffraction (XRD). A modeling approach specific to defective minerals was used because sample turbostratism prevented analysis using usual XRD refinement techniques (e.g. Rietveld analysis). It is shown that C-S-H with Ca/Si ratio of ∼ 0.8 are structurally similar to nano-crystalline turbostratic tobermorite, a naturally occurring mineral. Their structure thus consists of sheets of calcium atoms in 7-fold coordination, covered by ribbons of silicon tetrahedra with a dreierketten (wollastonite-like) organization. In these silicate ribbons, 0.42 Si per bridging tetrahedron are missing. Random stacking faults occur systematically between successive layers (turbostratic stacking). Layer-to-layer distance is equal to 11.34 Å. Crystallites have a mean size of 10 nm in the a–b plane, and a mean number of 2.6–2.9 layers stacked coherently along the c* axis.

36 MATERIALS SCIENCE↗