Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SFR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Use of Multiple Reheat Helium Brayton Cycles to Eliminate the Intermediate Heat Transfer Loop for Advanced Loop Type SFRs

The sodium intermediate heat transfer loop is used in existing sodium cooled fast reactor (SFR) plant design as a necessary safety measure to separate the radioactive primary loop sodium from the water of the steam Rankine power cycle. However, the intermediate heat transfer loop significantly increases the SFR plant cost and decreases the plant reliability due to the relatively high possibility of sodium leakage. A previous study shows that helium Brayton cycles with multiple reheat and intercooling for SFRs with reactor outlet temperature in the range of 510°C to 650°C can achieve thermal efficiencies comparable to or higher than steam cycles or recently proposed supercritical CO2 cycles. Use of inert helium as the power conversion working fluid provides major advantages over steam or CO2 by removing the requirement for safety systems to prevent and mitigate the sodium-water or sodium-CO2 reactions. A helium Brayton cycle power conversion system therefore makes the elimination of the intermediate heat transfer loop possible. This paper presents a pre-conceptual design of multiple reheat helium Brayton cycle for an advanced loop type SFR. This design widely refers the new horizontal shaft distributed PBMR helium power conversion design features. For a loop type SFR with reactor outlet temperature 550°C, the design achieves 42.4% thermal efficiency with favorable power density comparing with high temperature gas cooled reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Design Considerations for Economically Competitive Sodium Cooled Fast Reactors

The technological viability of sodium cooled fast reactors (SFR) has been established by various experimental and prototype (demonstration) reactors such as EBR-II, FFTF, Phénix, JOYO, BN-600 etc. However, the economic competitiveness of SFR has not been proven yet. The perceived high cost premium of SFRs over LWRs has been the primary impediment to the commercial expansion of SFR technologies. In this paper, cost reduction options are discussed for advanced SFR designs. These include a hybrid loop-pool design to optimize the primary system, multiple reheat and intercooling helium Brayton cycle for the power conversion system and the potential for suppression of intermediate heat transport system. The design options for the fully passive decay heat removal systems are also thoroughly examined. These include direct reactor auxiliary cooling system (DRACS), reactor vessel auxiliary cooling system (RVACS) and the newly proposed pool reactor auxiliary cooling system (PRACS) in the context of the hybrid loop-pool design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Using optical fibers to examine thermal mixing of liquid sodium in a pool-type geometry

Sodium fast reactors (SFR) are poised to be a leading candidate for the next generation of commercial nuclear reactor deployment. Companies are commissioning designs for SFR increasing the need for experimental and computational analysis to improve the economics and safety of these reactors. Analysis of SFR behavior during reactor transients directly informs the understanding of reactor safety. Particularly, investigating the thermal transients associated with the reactor loss of flow transient allows for informed design decisions to be made regarding reactor safety. During loss of flow transients the flow rate of the coolant is significantly reduced, but not necessarily stopped. The reduction in flow rate results in coolant temperatures exiting the reactor core that can be drastically different than the coolant in upper pool. When these different temperature fluids interact, thermally stratified layers can form causing cyclic thermal fatigue on the reactor vessel potentially leading to pre-material failure. Past experimental studies have lacked high resolution temperature measurements. This research focuses on demonstrating the reliability of novel techniques for acquiring high resolution temperature measurements in a scaled liquid sodium facility. Tests are conducted that simulate postulated loss of flow transients and provide unprecedented spatial temperature distribution measurements.

42 ENGINEERING↗

EVALUATION OF HOT CHANNEL FACTOR FOR SODIUM-COOLED FAST REACTORS WITH MULTI-PHYSICS TOOLKIT

The evaluation of hot channel factor (HCF) is of great significance to the quantification of safety margins for reactor designs. In this paper, HCFs for a sodium-cooled fast reactor (SFR) are evaluated with the Simulation-based High-efficiency Advanced Reactor Prototyping (SHARP) toolkit, which is developed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign of DOE for multi-physics reactor performance and safety simulations. The high-fidelity neutronics and thermal hydraulics solvers PROTEUS and Nek5000 in the SHARP toolkit are coupled to perform the multi-physics simulations for HCF evaluation. The HCFs induced by cladding manufacturing tolerance, fissile content mal-distribution, wire orientation and uncertainties on the cladding, coolant, and fuel properties are evaluated for a reference core SFR design (AFR-100). The HCFs calculated with the SHARP toolkit are compared to legacy HCFs for similar reactor types. The comparison demonstrates the reduction or elimination of modeling uncertainties in the calculation of HCFs using high fidelity advanced modeling and simulation tools without the need of expensive experiments. Moreover, the reduction of the uncertainties on HCFs evaluation allows an increase in nominal parameters and safety margin, which in turn improves the economic competitiveness of the SFR.

Hot channel factor (HCF)↗

ARC-100 Reactor Security-by-Design Summary 2025

This report applies the security-by-design methodology developed in a previous National Nuclear Security Administration–sponsored work to the ARC-100, a sodium-cooled fast reactor (SFR) being developed by ARC Clean Technology, Inc (ARC). The report contains no proprietary information specific to the ARC 100 reactor. The insights developed in this report are high-level, and generally applicable to other sodium fast reactor designs. The information presented here is the result of a qualitative safety-based analysis and would not inform any potential adversary beyond what would be found in a docketed safety analysis report. The scope of this present report covers ARC-100’s reactor core, used fuel storage, used fuel assembly wash station, cesium trap, sodium cold trap, noble gas decay tanks, used fuel dry storage facility, damaged fuel storage facility, and radioactive waste building. These systems are also compared to a generic SFR design assumed in the previous study. The security assessment results show changes in structures, systems, and components (SSCs) safety importance relative to the generic SFR SSCs. Several SSCs have higher importance rankings than others, and it is recommended that protection efforts are prioritized for these SSCs. Results from this work will furnish a technical justification for the feasibility of these solutions for the ARC reactor's design and, where applicable, identify any regulatory benefits conferred by the proactive design aspect within a risk management framework. This initiative will contribute to a more secure design of the ARC reactor and support its licensing process.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

The eROSITA Final Equatorial-Depth Survey (eFEDS)

The eROSITA Final Equatorial Depth Survey (eFEDS), completed in survey mode during the calibration and performance verification phase of the eROSITA instrument on Spectrum Roentgen Gamma, delivers data at and beyond the final depth of the 4-yr eROSITA all-sky survey (eRASS:8), f 0.5–2 keV = 1.1 × 10 –14 erg s –1 cm –2 , over 140 deg 2 . It provides the first view of normal galaxy X-ray emission from X-ray binaries (XRBs) and the hot interstellar medium at the full depth of eRASS:8. We used the Heraklion Extragalactic Catalogue (HECATE) of galaxies to correlate with eFEDS X-ray sources and identify X-ray detected normal galaxies. This flux-limited X-ray survey is relatively free from selection effects and enables the study of integrated normal galaxy X-ray emission and its relation to galaxy parameters such as the stellar mass, star formation rate (SFR), and metallicity. We cross-correlated 32 646 eFEDS X-ray sources to 1181 HECATE normal galaxies and obtained 94 matches. We classified galaxies as star-forming, early-type, composite, and active galactic nuclei (AGN) using Sloan Digital Sky Survey (SDSS) and Six-degree Field (6dF) optical spectroscopy. The eFEDS field harbours 37 normal galaxies: 36 late-type (star-forming) galaxies and one early-type galaxy. There are 1.9 times as many normal galaxies as predicted by scaling relations via simulations, with an overabundance of late-type galaxies and a dearth of early-type galaxies. When compared with empirical relations, eFEDS dwarf galaxies with a high specific SFR have elevated L X /SFR at a fixed specific SFR and metallicity, indicating an increase in XRB emission due to low metallicity. We expect that eRASS:8 will detect 12 500 normal galaxies, the majority of which will be star-forming, with the caveat that there are unclassified sources in eFEDS and galaxy catalogue incompleteness issues that could increase the actual number of detected galaxies over these current estimates. eFEDS observations detected a rare population of galaxies – the metal-poor dwarf starbursts – that do not follow known scaling relations. eRASS is expected to discover significant numbers of these high-redshift analogues, which are important for studying the heating of the intergalactic medium at high redshift. Further investigation of the hot gas emission from normal galaxies and stochastic effects in the dwarf galaxy population are required to constrain their X-ray output.

79 ASTRONOMY AND ASTROPHYSICS↗

Spatially resolved mass–metallicity relation at $z$ ~ 0.26 from the MUSE-Wide Survey

Galaxies in the local universe have a spatially resolved star-forming main sequence (rSFMS) and mass–metallicity relation (rMZR). We know that the global mass–metallicity relation (MZR) results from the integral of the rMZR, and it evolves with redshift. However, the evolution of the rMZR with redshift is still unclear because the spatial resolution and signal-to-noise ratio are low. Currently, too few observations beyond the local universe are available, and only simulations can reproduce the evolution of the rMZR with redshift. We selected ten emission-line galaxies with an average redshift of $z$ ~ 0.26 from the MUSE-Wide DR1. We obtained the spatially resolved star formation rate (SFR) and metallicity from integral field spectroscopy (IFS), as well as the stellar mass surface density from 3D-HST photometry. We derived the rSFMS and rMZR at $z$ ~ 0.26 and compared them with those of local galaxies. We find that the rSFMS of galaxies at $z$ ~ 0.26 has a slope of ~0.771. The rMZR exists at z ~ 0.26, showing a similar shape to that of the local universe, but a lower average metallicity that is about ~0.11 dex lower than the local metallicity. In addition, we also study the spatially resolved fundamental metallicity relation (rFMR) of these galaxies. However, there is no obvious evidence that an rFMR exists at $z$ ~ 0.26, and it is not an extension of rMZR at a high SFR. Similar to their global versions, the rSFMS and rMZR of galaxies also evolve with redshift. At fixed stellar mass, galaxies at higher redshift show a higher SFR and lower metallicity. In conclusion, these suggest that the evolution of the global galaxy properties with redshift may result from integrating the evolution of the spatially resolved galaxy properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Understanding the role of morphology and environment in the dynamical evolution of isolated galaxy triplets

The environments where galaxies reside affects their evolutionary histories. Galaxy triplets (systems composed of three physically bound galaxies) are one of simplest groups of galaxies, and are therefore excellent laboratories to study evolutionary mechanisms where effects of the environment are minimal. We present a statistical study of the dynamical properties of isolated galaxy triplets as a function of their local and large-scale environments. To explore the connection of the dynamical evolution on the systems with the evolution of the galaxies composing the triplets, we consider observational properties such as morphology and star formation rate (SFR). We used the SDSS-based catalogue of Isolated Triplets (SIT), which contains 315 triplets. We classified each triplet according to galaxy morphologies and defined a parameter Q trip to quantify the total local tidal strengths in the systems. To quantify the dynamical stage of the system we used the parameters of harmonic radius R H , velocity dispersion σvr, crossing time H 0 t c , and virial mass M vir . Triplets composed of three early-type galaxies present the smallest R H , indicating that they are in general more compact than triplets with one or more late-type galaxies. Among triplets with low values of R H and H 0 t c , SIT triplets with Q trip < –2 are relaxed systems that are more dynamically evolved, while triplets with Q trip > –2 show compact configurations due to interactions within the system, such as ongoing mergers. We found that there is no dominant galaxy in triplets in terms of properties of stellar populations such as global colour and SFR. Moreover, the global SFR in isolated triplets composed of two or more early-type galaxies increases with the stellar mass ratio of the galaxies with respect to the central galaxy, therefore the system is globally ‘rejuvenated’.

79 ASTRONOMY AND ASTROPHYSICS↗

Load following capability of CANDLE reactor by adjusting coolant operation condition

The load following capability of CANDLE reactor is investigated in the condition that the control rods are unavailable. Both sodium cooled metallic fuel fast reactor (SFR) and {sup 208}Pb cooled metallic fuel fast reactor (LFR) are investigated for their performance in power rate changing by changing its coolant operation condition; either coolant flow rate or coolant inlet temperature. The change by coolant flow rate is difficult especially for SFR because the maximum temperature criteria on cladding material may be violated. The power rate can be changed for its full range easily by changing the coolant temperature at the core inlet. LFR can reduce the same amount of power rate by smaller change of temperature than SFR. However, the coolant output temperature is generally decreased for this method and the thermal efficiency becomes worse.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

WHAT IS DRIVING THE H I VELOCITY DISPERSION?

We explore what dominant physical mechanism sets the kinetic energy contained in neutral, atomic (H I) gas. Both supernova (SN) explosions and magnetorotational instability (MRI) have been proposed to drive turbulence in gas disks and we compare the H I line widths predicted from turbulence driven by these mechanisms to direct observations in 11 disk galaxies. We use high-quality maps of the H I mass surface density and line width, obtained by The H I Nearby Galaxy Survey. We show that all sample galaxies exhibit a systematic radial decline in the H I line width, which appears to be a generic property of H I disks and also implies a radial decline in kinetic energy density of H I. At a galactocentric radius of r {sub 25}-often comparable to the extent of significant star formation-there is a characteristic value of the H I velocity dispersion of 10 {+-} 2 km s{sup -1}. Inside this radius, galaxies show H I line widths well above the thermal value (corresponding to {approx}8 km s{sup -1}) expected from a warm H I component, implying that turbulence drivers must be responsible for maintaining this line width. Therefore, we compare maps of H I kinetic energy to maps of the star formation rate (SFR)-a proxy for the SN rate-and to predictions for energy generated by MRI. We find a positive correlation between kinetic energy of H I and SFR; this correlation also holds at fixed {sigma}{sub H{sub i}}, as expected if SNe were driving turbulence. For a given turbulence dissipation timescale, we can estimate the energy input required to maintain the observed kinetic energy. The SN rate implied by the observed recent SFR is sufficient to maintain the observed velocity dispersion, if the SN feedback efficiency is at least {epsilon}{sub SN} {approx_equal} 0.1 x (10{sup 7} yr/{tau} {sub D}), assuming {tau} {sub D} {approx_equal} 10{sup 7} yr for the turbulence dissipation timescale. Beyond r {sub 25}, this efficiency would have to increase to unrealistic values, {epsilon} {approx}> 1, suggesting that mechanical energy input from young stellar populations does not supply most kinetic energy in outer disks. On the other hand, both thermal broadening and turbulence driven by MRI can plausibly produce the velocity dispersions and kinetic energies that we observe in this regime ({approx}>r {sub 25})

79 ASTRONOMY AND ASTROPHYSICS↗

A SEARCH FOR GALAXIES PRODUCING METAL-RICH QUASAR ABSORBERS

We have carried out optical and near-IR imaging of three fields with metal-rich damped or sub-damped Ly{alpha} quasar absorption systems, using the Goddard Fabry-Perot system and the Near-IR Camera and Fabry-Perot Spectrometer at the Apache Point Observatory 3.5 m telescope. The aim of these observations was to detect the underlying galaxies and search for their redshifted [O II] {lambda}3727 emission and optical/near-IR continuum. Candidate absorber galaxies separated by 2.''5-8.''8 from the quasars are detected in two of three absorber fields in the H and K{sub S} bands at >3{sigma} level. The potentially high success rate in finding galaxy counterparts of metal-rich absorbers suggests that the metal-rich absorbers may be easier to detect in imaging observations than the metal-poor absorbers targeted in many previous imaging studies of damped Ly{alpha} absorbers. Of course, spectroscopic confirmation of the candidate galaxies is necessary to establish whether they are at the absorber redshifts. Interestingly, no significant [O II] emission is detected in any of the fields at >3{sigma} level, implying limits on the star formation rate (SFR) of 0.7-2.6 M {sub sun} yr{sup -1} per 0.''76 x 0.''76 region, if no dust extinction is assumed. The 3{sigma} sensitivity levels in the narrowband images (tuned to the expected positions of the redshifted [O II] {lambda}3727) ranged between 1.3 x 10{sup -17} and 3.3 x 10{sup -17} erg s{sup -1} cm{sup -2} in observed frame. If the candidate galaxies are at the absorber redshifts, the lack of [O II] emission would suggest that the metal-rich absorbers may arise in early-type or S0 galaxies that do not have significant 'current' star formation. We compare our results with those compiled from the literature and with predictions of global average SFR based on the models of cosmic chemical evolution. Together, these studies indicate SFRs much lower than the predictions for the global mean SFR.

79 ASTRONOMY AND ASTROPHYSICS↗

MORE GALAXIES IN THE LOCAL VOLUME IMAGED IN H{alpha}

We have carried out an H{alpha} flux measurement for 52 nearby galaxies as part of a general H{alpha} imaging survey for the Local Volume sample of galaxies within 10 Mpc. Most of the objects are probable members of the groups around Maffei 2/IC 342, NGC 672/IC 1727, NGC 784, and the Orion galaxy. The measured H{alpha} fluxes corrected for extinction are used to derive the galaxy star formation rate (SFR). We briefly discuss some basic scaling relations between SFR, hydrogen mass, and absolute magnitude of the Local Volume galaxies. The total SFR density in the local (z = 0) universe is estimated to be (0.019 {+-} 0.003)M{sub sun} yr{sup -1} Mpc{sup -3}.

79 ASTRONOMY AND ASTROPHYSICS↗

INFRARED NARROWBAND TOMOGRAPHY OF THE LOCAL STARBURST NGC 1569 WITH THE LARGE BINOCULAR TELESCOPE/LUCIFER

We used the near-IR imager/spectrograph LUCIFER mounted on the Large Binocular Telescope to image, with subarcsecond seeing, the local dwarf starburst NGC 1569 in the JHK bands and He I 1.08 {mu}m, [Fe II] 1.64 {mu}m, and Br{gamma} narrowband filters. We obtained high-quality spatial maps of He I 1.08 {mu}m, [Fe II] 1.64 {mu}m, and Br{gamma} emission across the galaxy, and used them together with Hubble Space Telescope/Advanced Camera for Surveys images of NGC 1569 in the H{alpha} filter to derive the two-dimensional spatial map of the dust extinction and surface star formation rate (SFR) density. We show that dust extinction (as derived from the H{alpha}/Br{gamma} flux ratio) is rather patchy and, on average, higher in the northwest (NW) portion of the galaxy (E{sub g}(B - V) {approx_equal} 0.71 mag) than in the southeast (E{sub g}(B - V) {approx_equal} 0.57 mag). Similarly, the surface density of SFR (computed from either the dereddened H{alpha} or dereddened Br{gamma} image) peaks in the NW region of NGC 1569, reaching a value of about 4 x 10{sup -6} M{sub sun} yr{sup -1} pc{sup -2}. The total SFR as estimated from the integrated, dereddened H{alpha} (or, alternatively, Br{gamma}) luminosity is about 0.4 M{sub sun} yr{sup -1}, and the total supernova rate from the integrated, dereddened [Fe II] 1.64 {mu}m luminosity is about 0.005 yr{sup -1} (assuming a distance of 3.36 Mpc). The azimuthally averaged [Fe II] 1.64 {mu}m/Br{gamma} flux ratio is larger at the edges of the central, gas-deficient cavities (encompassing the superstar clusters A and B) and in the galaxy outskirts. If we interpret this line ratio as the ratio between the average past star formation (as traced by supernovae) and ongoing activity (represented by OB stars able to ionize the interstellar medium), it would then indicate that star formation has been quenched within the central cavities and lately triggered in a ring around them. The number of ionizing hydrogen and helium photons as computed from the integrated, dereddened H{alpha} and He I 1.08 {mu}m luminosities suggests that the latest burst of star formation occurred about 4 Myr ago and produced new stars with a total mass of {approx_equal}1.8 x 10{sup 6} M{sub sun}.

79 ASTRONOMY AND ASTROPHYSICS↗

TESTING THE GLOBAL STAR FORMATION RELATION: AN HCO{sup +} (3-2) MAPPING STUDY OF RED MSX SOURCES IN THE BOLOCAM GALACTIC PLANE SURVEY

We present an analysis of the relation between the star formation rate (SFR) and mass of dense gas in Galactic clumps and nearby galaxies. Using the bolometric luminosity as a measure of SFR and the molecular line luminosity of HCO{sup +} (3-2) as a measure of dense gas mass, we find that the relation between SFR and M{sub dense} is approximately linear. This is similar to published results derived using HCN (1-0) as a dense gas tracer. HCO{sup +} (3-2) and HCN (1-0) have similar conditions for excitation. Our work includes 16 Galactic clumps that are in both the Bolocam Galactic Plane Survey and the Red MSX Source Survey, 27 water maser sources from the literature, and the aforementioned HCN (1-0) data. Our results agree qualitatively with predictions of recent theoretical models which state that the nature of the relation should depend on how the critical density of the tracer compares with the mean density of the gas.

79 ASTRONOMY AND ASTROPHYSICS↗

CORRELATIONS BETWEEN SDSS TYPE Ia SUPERNOVA RATES AND HOST GALAXY PROPERTIES

Studying the correlation of Type Ia supernova rates (SNRs) with host galaxy properties is an important step in understanding the exact nature of Type Ia supernovae (SNe Ia). We use SNe Ia from the SDSS-II sample, spectroscopically determined masses and star formation rates, and a new maximum likelihood method, to fit the Scannapieco and Bildsten rate model SNR = A Multiplication-Sign M + B Multiplication-Sign SFR, where M is galaxy mass and SFR is star formation rate. We find A = 3.5{sup +0.9}{sub -0.7} Multiplication-Sign 10{sup -14} (SNe/yr)(M{sub Sun }){sup -1} and B = 1.3{sup +0.4}{sub -0.3} Multiplication-Sign 10{sup -3} (SNe/yr)(M{sub Sun} yr{sup -1}){sup -1}, assuming overall efficiency of 0.5. This is in reasonable agreement with other determinations. However we find strong evidence that this model is a poor fit to other projections of the data: it fails to correctly predict the distribution of supernovae with host mass or SFR. An additional model parameter is required; most likely this parameter is related to host galaxy mass. Some implications of this result are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

STAR FORMATION PROPERTIES IN THE LOCAL VOLUME GALAXIES VIA H{alpha} AND FAR-ULTRAVIOLET FLUXES

A distance-limited sample of 869 objects from the Updated Nearby Galaxy Catalog is used to characterize the star formation status of the Local Volume population. We present a compiled list of 1217 star formation rate (SFR) estimates for 802 galaxies within 11 Mpc, derived from the H{alpha} imaging surveys and the GALEX far-ultraviolet survey. We briefly discuss some basic scaling relations between SFR and luminosity, morphology, H I mass, surface brightness, and the environment of the galaxies. About 3/4 of our sample consist of dwarf galaxies, for which we offer a more refined classification. We note that the specific SFR of nearly all luminous and dwarf galaxies does not exceed the maximum value: log (SFR/L{sub K} ) = -9.4 [yr{sup -1}]. Most spiral and blue dwarf galaxies have enough time to generate their stellar mass during the cosmological time, T{sub 0}, with the observed SFRs. They dispose of a sufficient amount of gas to support their present SFRs over the next T{sub 0} term. We note that only a small fraction of BCD, Im, and Ir galaxies (about 1/20) proceed in a mode of vigorous starburst activity. In general, the star formation history of spiral and blue dwarf galaxies is mainly driven by their internal processes. The present SFRs of E, S0, and dSph galaxies typically have 1/30-1/300 of their former activity.

79 ASTRONOMY AND ASTROPHYSICS↗

A magnified view of star formation at z = 0.9 from two lensed galaxies

We present new narrowband Hα imaging from the Hubble Space Telescope of two z = 0.91 galaxies that have been lensed by the foreground galaxy cluster A2390. These data probe spatial scales as small as ∼0.3 kpc, providing a magnified look at the morphology of star formation at an epoch when the global star formation rate (SFR) was high. However, dust attenuates our spatially resolved SFR indicators, the Hα and rest-UV emission, and we lack a direct measurement of extinction. Other studies have found that ionized gas in galaxies tends to be roughly 50% more obscured than stars; however, given an unextincted measurement of the SFR we can quantify the relative stellar to nebular extinction and the extinction in Hα. We infer SFRs from Spitzer and Herschel mid- to far-infrared observations and compare these to integrated Hα and rest-UV SFRs; this yields stellar to nebular extinction ratios consistent with previous studies. We take advantage of high spatial resolution and contextualize these results in terms of the source-plane morphologies, comparing the distribution of Hα to that of the rest-frame UV and optical light. In one galaxy, we measure separate SFRs in visually distinct clumps, but can set only a lower limit on the extinction and thus the star formation. Consequently, the data are also consistent with there being an equal amount of extinction along the lines of sight to the ionized gas as to the stars. Future observations in the far-infrared could settle this by mapping out the dust directly.

79 ASTRONOMY AND ASTROPHYSICS↗

GLOBAL STAR FORMATION RATE DENSITY OVER 0.7 < z < 1.9

We determine the global star formation rate (SFR) density at 0.7 < z < 1.9 using emission-line-selected galaxies identified in Hubble Space Telescope-Near Infrared Camera and Multi-Object Spectrograph (HST-NICMOS) grism spectroscopy observations. Observing in a pure parallel mode throughout HST Cycles 12 and 13, our survey covers {approx}104 arcmin{sup 2} from which we select 80 galaxies with likely redshifted H{alpha} emission lines. In several cases, a somewhat weaker [O III] doublet emission is also detected. The H{alpha} luminosity range of the emission-line galaxy sample is 4.4 x 10{sup 41} < L(H{alpha}) < 1.5 x 10{sup 43} erg s{sup -1}. In this range, the luminosity function is well described by a Schechter function with {phi}* = (4.24 {+-} 3.55) x 10{sup -3} Mpc{sup -3}, L* = (2.88 {+-} 1.58) x 10{sup 42} erg s{sup -1}, and {alpha} = -1.39 {+-} 0.43. We derive a volume-averaged SFR density of 0.138 {+-} 0.058 M {sub sun} yr{sup -1} Mpc{sup -3} at z = 1.4 without an extinction correction. Subdividing the redshift range, we find SFR densities of 0.088 {+-} 0.056 M {sub sun} yr{sup -1} Mpc{sup -3} at z = 1.1 and 0.265 {+-} 0.174 M {sub sun} yr{sup -1} Mpc{sup -3} at z = 1.6. The overall star formation rate density is consistent with previous studies using H{alpha} when the same average extinction correction is applied, confirming that the cosmic peak of star formation occurs at z > 1.5.

99 GENERAL AND MISCELLANEOUS↗