Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCANDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

The magnetic properties of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.81}M{sub 0.09}Ti{sub 0.1}O{sub 3} solid solutions (M = Co, Mn, Sc, Al)

Graphical abstract: In Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} solid solution, both magnetic ions (Co{sup 3+}, Mn{sup 3+}) and nonmagnetic ions (Sc{sup 3+}, Al{sup 3+}) were chosen to partially replace Fe{sup 3+}. Their magnetic properties were carefully investigated. Figures show M-H loops at RT of Co{sup 3+} doped sample (left) and Sc{sup 3+} substituted solid solution (right). Highlights: {yields} The electrical resistivity of BiFeO{sub 3} is enhanced by forming solid solution with BaTiO{sub 3}. {yields} We replace Fe{sup 3+} by both magnetic ions Co{sup 3+}, Mn{sup 4+} and nonmagnetic ions Sc{sup 3+}, Al{sup 3+} to investigate the magnetic properties. {yields} Structure-magnetic property relationship has been established by Rietveld refinement. -- Abstract: Solid solutions with general formula Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.81}M{sub 0.09}Ti{sub 0.1}O{sub 3} (M = Co, Mn, Sc, Al) together with parental Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} were prepared by the traditional solid state reaction method. Their structural, room temperature magnetic, and dielectric properties were investigated. X-ray diffraction analysis indicated that all samples maintained original R3c space group. M-H hysteresis loop of Co{sup 3+} doped sample saturated at an applied field of 1 T with spontaneous magnetization of 1.735 emu/g, while Mn{sup 4+} substitution enhanced the magnetization of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} less strongly; addition of Sc{sup 3+} helped decrease magnetic coercive field while Al{sup 3+} modified sample exhibited paramagnetic M-H hysteresis loop. Differential scanning calorimetry was applied to determine the Neel temperature (T{sub N}) and the T{sub N} for undoped, Co{sup 3+}, Mn{sup 4+}, Sc{sup 3+}, Al{sup 3+} doped solid solutions were 318.1, 324.3, 335.7, 293.9 and 295.8 respectively. Sc{sup 3+} substitution had little influence on the dielectric properties of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} while Al{sup 3+} doping improved its dielectric constant. In contrast, Co{sup 3+}, Mn{sup 4+} doped samples showed decreased permittivity but inhibited tan {delta} at frequencies larger than 30 kHz.

36 MATERIALS SCIENCE↗

Thermal decomposition behavior of Cu–Al layered double hydroxide, and ethylenediaminetetraacetate-intercalated Cu–Al layered double hydroxide reconstructed from Cu–Al oxide for uptake of Y{sup 3+} from aqueous solution

Graphical abstract: Display Omitted Highlights: ► Decomposition of CO{sub 3}·Cu–Al LDH occurred in four stages. ► The edta·Cu–Al LDH was found to take up Y{sup 3+} in aqueous solution. ► The edta·Cu–Al LDH could selectively take up rare earth ions from a mixed solution. -- Abstract: CO{sub 3}{sup 2−}-intercalated Cu–Al layered double hydroxide (CO{sub 3}·Cu–Al LDH) was calcined to yield Cu–Al oxide, and then ethylenediaminetetraacetate-intercalated Cu–Al LDH (edta·Cu–Al LDH) was prepared by reconstructing Cu–Al oxide in edta solution. Decomposition of CO{sub 3}·Cu–Al LDH occurred in four stages. The production of Cu–Al oxide was caused by the thermal decomposition of CO{sub 3}·Cu–Al LDH until the third stage. The first stage was the elimination of adsorbed surface water and interlayer water in CO{sub 3}·Cu–Al LDH. The second and third stages were the dehydroxylation of the brucite-like octahedral layers and the elimination of CO{sub 3}{sup 2−} intercalated in the interlayers. The edta·Cu–Al LDH was found to take up Y{sup 3+} in aqueous solution. The uptake of Y{sup 3+} was caused not only by the chelating function of Hedta{sup 3−} in the interlayer but also by the chemical behavior of Cu–Al LDH itself. The edta·Cu–Al LDH was found to selectively take up rare earth ions from a mixed solution. The degree of uptake was high, in the order Sc{sup 3+} > Y{sup 3+} > La{sup 3+} for all time durations, which was attributable to differences among the stabilities of Sc(edta){sup −}, Y(edta){sup −} and La(edta){sup −}.

36 MATERIALS SCIENCE↗

Effect of scandia doping method on the emission uniformity of scandate cathode with Sc{sub 2}O{sub 3}–W matrix

Graphical abstract: Emission uniformity of the cathodes prepared by mechanical mixing (a) and spray drying method (b). - Highlights: • The emission uniformity of scandate cathodes has been quantitively obtained. • The nanoparticles on the cathode surface lead to the electric field enhancement. • The cathode prepared by spray drying method exhibits good emission uniformity. - Abstract: Scandia doped tungsten matrix dispenser cathodes were manufactured using scandia doped tungsten powder prepared by mechanical mixing, liquid–solid doping and a spray drying method. It is found the macrostructure of the cathode depended on the powder preparation method. The cathode prepared using the powder prepared by spray drying method had a homogenous and porous matrix characterized with grains with a diameter of less than 1 μm and with many nanoparticles distributing uniformly around these grains. The cathode with submicron structure and uniform distribution of scandia exhibited good emission uniformity. The emission uniformity ΔJ/J of the cathode prepared by spray drying method was 0.17, about 6 times lower than that of the cathode prepared by mechanical mixing method. The calculation results showed that the nanoparticles led to electric field enhancement. A Ba–Sc–O multilayer on the cathode surface and nanoparticles distributing mainly on W grains contributed to the emission property of the cathode.

36 MATERIALS SCIENCE↗

Enhanced ferroelectric polarization and magnetization in BiFe{sub 1−x}Sc{sub x}O{sub 3} ceramics

Highlights: • Single phase Sc doped BFO ceramics were successfully fabricated. • Dielectric constant and magnetization are enhanced in doped BFO system. • Polarization first increases and then decreases in doped BFO system. • M{sub r} of 0.0105 emu/g and P{sub r} of 16.1 μC/cm{sup 2} were revealed simultaneously at x = 0.01. - Abstract: Multiferroic BiFe{sub 1−x}Sc{sub x}O{sub 3} ceramics with x = 0.00–0.10 were synthesized by rapid liquid phase sintering. The influences of Sc doping on the crystalline structures, dielectric, ferroelectric, and magnetic behaviors of BiFeO{sub 3} ceramics were explored. The X-ray diffraction and the Raman spectrometric analysis revealed that all the samples are nearly single phase of rhombohedral structure with the incorporation of Sc ions into BiFeO{sub 3}. With increase doping concentration of x, the dielectric constant, dielectric loss, and remnant polarization for the doped BiFeO{sub 3} increase first and then drop down with further rise of x. A saturated ferroelectric polarization can be achieved at a small amount of Sc doping concentration (x < 0.03), with a optimized remnant polarization of 17.6 μC/cm{sup 2} at x = 0.03. Meanwhile, the magnetization is also slightly increased by introducing Sc dopant, with a maximum remnant magnetization of 0.0105 emu/g at x = 0.01. These results indicate that BiFeO{sub 3} ceramics with small amounts of Sc-doping may be promising for applications in magnetoelectric devices.

36 MATERIALS SCIENCE↗

Solid state reaction synthesis and photoluminescence properties of Dy{sup 3+} doped Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12} phosphor

Highlights: • Ca{sub 3−x}Sc{sub 2}Si{sub 3}O{sub 12}:xDy{sup 3+} (0.01 ≤ x ≤ 0.03) was successfully synthesized under a reducing atmosphere. • The thermal stability of the Ca{sub 2.975}Sc{sub 2}Si{sub 3}O{sub 12}:0.025Dy{sup 3+} is superior to commercial phosphors in theory and experiment. • The optimal chromaticity coordinates of Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} is (x = 0.3425, y = 0.3343) upon 350 nm excitation. - Abstract: The white emission phosphor Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} was synthesized by the solid-state reaction. Phase analysis and characteristic luminescence properties are investigated by X-ray diffraction and photoluminescence spectra measurement. Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} phosphor shows strong absorption in 350–410 nm region and exhibits white emission with CIE chromaticity coordinates of (0.3425, 0.3343). Its emission intensity at 250 °C remained 74% of that measured at room temperature. Moreover, the activation energy is also calculated through the Arrhenius equation. The result shows that the thermostability of Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} is superior than that of commercial phosphor Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Ce{sup 3+}. The outstanding luminescent properties indicate that Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} could be a potential white light emission phosphor.

36 MATERIALS SCIENCE↗

Investigation on the upconversion luminescence in Ho3+/Yb3+ co-doped Ba3Sc4O9 phosphor

Highlights: • The optical properties of novel Ba{sub 3}Y{sub 4}O{sub 9}:Ho{sup 3+}/Yb{sup 3+} phosphor were investigated. • The luminescence color could be tuned from green to yellow-green light. • The energy transfer mechanisms of UC luminescence were investigated in detail. • The phosphor can be a good candidate for green UC material in display fields and fluorescent labeling. - Abstract: A series of Ba{sub 3}Sc{sub 4}O{sub 9}:Ho{sup 3+}/Yb{sup 3+} phosphors were synthesized by a high-temperature solid-state reaction method. The phase purity and upconversion luminescence were characterized by X-ray diffraction and photoluminescence spectroscopy. The sintering temperature and doping concentrations were optimized to obtain the strongest emission intensity. Under 980 nm laser diode excitation, the green (545 nm, {sup 5}F{sub 4}/{sup 5}S{sub 2} → {sup 5}I{sub 8}) and red (665 nm, {sup 5}F{sub 5} → {sup 5}I{sub 8}) emissions were observed. The cross-relaxation and back-energy-transfer processes play an important role to adjust the emission intensity ratio of Green/Red at different dopant concentrations. Based on the energy level diagrams, the energy transfer mechanisms are investigated in detail according to the analysis of pump power dependence and luminescence decay curves. The upconversion luminescence properties of the phosphor were evaluated and the results show good color monochromaticity and relatively high upconversion luminescence intensity. The Ba{sub 3}Sc{sub 4}O{sub 9}:Ho{sup 3+}/Yb{sup 3+} can be a good candidate for green upconversion material in display fields and fluorescent labeling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nuclear Data Sheets for A = 53

The 1999 evaluation of A = 53 (1999Hu14) has been revised using experimental nuclear structure data available before April 2007. A summary of information obtained in various reaction and decay experiments is presented, together with adopted level schemes and properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 58

The evaluated spectroscopic data are presented for known nuclides of mass 58 (Ca,Sc,Ti,V,Cr,Mn,Fe,Co,Ni,Cu,Zn). Excited-state data are nonexistent for {sup 58}Ca, {sup 58}Sc, and {sup 58}Zn; and very scarce for {sup 58}Ti and {sup 58}V, with only one tentative level in each case. Except for half-lives, no other radioactive decay data are available for the decay of {sup 58}Sc and {sup 58}Ti. The radioactive decays of {sup 58}V, {sup 58}Cr and {sup 58}Zn are not considered as well established. Superdeformed structures are known in {sup 58}Ni (two bands) and in {sup 58}Cu (one band). Prompt proton decay of high-spin states in 58Ni for eight levels and prompt {alpha} decay for two states have been identified. In {sup 58}Cu, one high-spin state decays by prompt proton emission. Very complex high-spin structures are now known for {sup 58}Ni from the work by 2009Jo03.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 61

The evaluated spectroscopic data are presented for known nuclides of mass 61 (Sc,Ti,V,Cr,Mn,Fe,Co,Ni, Cu,Zn,Ga,Ge). Excited-state data are nonexistent for {sup 61}Sc, {sup 61}Ti, {sup 61}V, and {sup 61}Ge. Significant amounts of new data have been added since the previous NDS evaluation of A=61 nuclides (1999Bh04). {sup 61}Sc nuclide is now experimentally known, but without any knowledge of its half-life. The ground state half-lives of {sup 61}Ti and {sup 61}V are now determined. Excited-state data have become available for {sup 61}Cr, {sup 61}Mn and {sup 61}Ga, while for {sup 61}Ge, five excited states were erroneously assigned in the previous evaluation, these have been omitted here. Improved and extensive high-spin excitations are available for {sup 61}Fe, {sup 61}Cu and {sup 61}Zn, including several new superdeformed structures in {sup 61}Cu and {sup 61}Zn. Thermal neutron capture γ-ray data are available in detail from 2004Ra23. The radioactive decay schemes of {sup 61}Sc and {sup 61}Ti are not known, while those for {sup 61}V, {sup 61}Fe and {sup 61}Ge are poorly known. This work benefited from the earlier full evaluations of A=61 published by 1999Bh04, 1983Ek01 and 1975Au05 and the one published in an ‘update’ mode by 1992Zh31. The data and conclusions presented in the current work supersede those in all the previous evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 43

The experimental data are evaluated for known nuclides of mass number A = 43 (Al,Si,P,S,Cl,Ar,K,Ca,Sc,Ti,V,Cr). Detailed evaluated level properties and related information are presented, including adopted values of level and γ–ray energies, decay data (energies, intensities and placement of radiations), and other spectroscopic data. Here, this work supersedes earlier full evaluations of A = 43 published by 2001Ca24 and 1990En08 (also 1978En04, and 1998En04 update).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 42

The experimental data are evaluated for known nuclides of mass number A = 42 (Al, Si, P, S, Cl, Ar, K, Ca, Sc, Ti, V, Cr). Detailed evaluated level properties and related information are presented, including adopted values of level and γ–ray energies, decay data (energies, intensities and placement of radiations), and other spectroscopic data. This work supersedes earlier full evaluations of A = 42 published by B. Singh, J.A. Cameron – Nucl.Data Sheets 92, 1 (2001) and P.M. Endt – Nucl. Phys. A521, 1 (1990); Errata and Addenda Nucl. Phys. A529, 763 (1991); Errata Nucl. Phys. A564, 609 (1993) (also P.M. Endt – Nucl. Phys. A633, 1 (1998) update). No excited states are known in {sup 42}Al, {sup 42}P, {sup 42}V and {sup 42}Cr, and structure information for {sup 42}Si and {sup 42}S is quite limited. There are no decay schemes available for the decay of {sup 42}Al, {sup 42}Si, {sup 42}P, {sup 42}V and {sup 42}Cr, while the decay schemes of {sup 42}Cl and {sup 42}Ti are incomplete in view of scarcity of data, and large gap between their Q–values and the highest energy levels populated in corresponding daughter nuclei. Structures of {sup 42}Ca, {sup 42}K, {sup 42}Sc and {sup 42}Ar nuclides remain the most extensively studied via many different nuclear reactions and decays.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A=39☆

Experimental nuclear structure data from various reactions and decays have been evaluated for all known nuclides of mass 39 (Mg, Al, Si, P, S, Cl, Ar, K, Ca, Sc, Ti). Detailed evaluated nuclear structure information is presented for each reaction and decay and the best values combining all available data are recommended for level energies, half-lives, γ-ray energies and intensities, decay properties (energies, intensities and placement of radiations), and other spectroscopic data. The {sup 39}K, {sup 39}Ca and {sup 39}Ar are the most extensively studied nuclides; no excited states are known in {sup 39}Mg and {sup 39}Ti. This work supersedes the earlier full evaluation of A=39 by B. Singh and J. Cameron (2006Si02).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A=59☆

-- Abstract: Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for {sup 59}Sc, {sup 59}Ti, {sup 59}V, {sup 59}Cr, {sup 59}Mn, {sup 59}Fe, {sup 59}Co, {sup 59}Ni, {sup 59}Cu, {sup 59}Zn, {sup 59}Ga, and {sup 59}Ge. This evaluation for A=59 supersedes the earlier one by C. M. Baglin (2002Ba42) and updates for some nuclides in the ENSDF database. Highlights: of this evaluation are the following: In {sup 59}Fe, a new level at 568.45 keV (3/2{sup −}) has been added. This resolves a doublet at 570 keV, which was reflected in earlier evaluations (1983An22, 1993Ba85, 2002Ba42) and literature as well. Conflicting spin assignments for 2153.62 keV level of {sup 59}Co [9/2,13/2 in (α,pγ); (13/2) in ({sup 15}N,4nγ); 15/2 in (p,p′γ), (7/2{sup −}) in (n,n′γ)] exist in the literature and additional experimental work is needed to resolve the issue.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A=38☆

All available experimental data of nuclear structure and decay are evaluated for the known nuclides of mass 38 (Mg, Al, Si, P, S, Cl, Ar, K, Ca, Sc, Ti). Detailed results of this evaluation are presented with the best values recommended for level energies, half-lives, γ-ray energies and intensities, decay properties (energies, intensities and placement of radiations), and other spectroscopic information. The {sup 38}Ar nuclide remains as the most extensively studied via various reactions and decays; no excited states are known in {sup 38}Al except for that an isomeric state is tentatively proposed from a recent β-decay measurement (2015St14); the {sup 38}Sc and {sup 38}Ti nuclides remain unidentified, with no experimental references reported for {sup 38}Sc and with a measurement of fragmentation cross sections reported for {sup 38}Ti but finding no evidence of its presence (1996Bl21). This work supersedes the earlier full evaluation of A=38 by J.A. Cameron and B. Singh (2008Ca01).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A=50

The experimental nuclear structure and decay data are evaluated for all the known nuclides of mass 50 (Cl, Ar, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni). Here, detailed evaluated nuclear structure information are presented in individual decay and reaction datasets and the best values are recommended in the Adopted dataset for level properties, γ and β radiations, and other spectroscopic information. No excited states are known in 50Cl and 50Ni, and limited information is available for 50 Ar, 50 K, 50 Fe and 50 Co. This work supersedes earlier evaluations of A=50 by 2011El01, 1995Bu09, 1990Bu18, 1984Al29, and 1976Au07.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Protein-based approach for high-purity Sc, Y, and grouped lanthanide separation

Rare earth elements (REEs: Sc, Y, La- Lu) are irreplaceable components in many clean energy and consumer technologies. However, the extraction and subsequent separation of individual REEs from ore-based feedstocks remains a significant economic and environmental challenge. Here in this work, we investigated the intra-REE separation potential of lanmodulin (LanM), a natural protein from Methylorubrum extorquens that has emerged as a sustainable potential alternative to conventional solvent extraction-based separation. By determining the intra-REE selectivity of immobilized LanM and systematically testing pH-based and small chelator-based (i.e., citrate and malonate) desorption processes, we established the framework and methodology for achieving select individual and grouped REE separations from a mixed REE feedstock. We show that Sc forms the tightest complex with LanM among REEs but can be readily and selectively desorbed using malonate to generate high-purity Sc (>99 % purity, >99 % yield) in a single adsorption/desorption cycle. We further show that the intrinsic REE selectivity of LanM is sufficient to achieve heavy REE (HREE) separation from light and middle REEs (L-MREEs), yielding an yttrium-enriched product. This separation effect is further magnified by pairing LanM’s unique M-LREE preference with a HREE-preferring chelator in the desorption process, which enriches HREE and MREE fractions relative to low value, abundant La/Ce. Finally, by combining pH- and citrate-based desorption processes in a two-cycle separation scheme, we demonstrate the generation of fractions highly enriched in Y, Gd-Lu, Pr-Eu, and La-Ce. Collectively, these data support the application of a LanM-based approach for achieving impactful REE separations from mixed REE feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a PBPK model of thiocyanate in rats with an extrapolation to humans: A computational study to quantify the mechanism of action of thiocyanate kinetics in thyroid

Thyroid homeostasis can be disturbed due to thiocyanate exposure from the diet or tobacco smoke. Thiocyanate inhibits both thyroidal uptake of iodide, via the sodium-iodide symporter (NIS), and thyroid hormone (TH) synthesis in the thyroid, via thyroid peroxidase (TPO), but the mode of action of thiocyanate is poorly quantified in the literature. The characterization of the link between intra-thyroidal thiocyanate concentrations and dose of exposure is crucial for assessing the risk of thyroid perturbations due to thiocyanate exposure. We developed a PBPK model for thiocyanate that describes its kinetics in the whole-body up to daily doses of 0.15 mmol/kg, with a mechanistic description of the thyroidal kinetics including NIS, passive diffusion, and TPO. The model was calibrated in a Bayesian framework using published studies in rats. Goodness-of-fit was satisfactory, especially for intra-thyroidal thiocyanate concentrations. Thiocyanate kinetic processes were quantified in vivo, including the metabolic clearance by TPO. The passive diffusion rate was found to be greater than NIS-mediated uptake rate. The model captured the dose-dependent kinetics of thiocyanate after acute and chronic exposures. Model behavior was evaluated using a Morris screening test. The distribution of thiocyanate into the thyroid was found to be determined primarily by the partition coefficient, followed by NIS and passive diffusion; the impact of the latter two mechanisms appears to increase at very low doses. Extrapolation to humans resulted in good predictions of thiocyanate kinetics during chronic exposure. The developed PBPK model can be used in risk assessment to quantify dose-response effects of thiocyanate on TH. - Highlights: • A PBPK model of thiocyanate (SCN{sup −}) was calibrated in rats in a Bayesian framework. • The intra-thyroidal kinetics of thiocyanate including NIS and TPO was modeled. • Passive diffusion rate for SCN{sup −} seemed to be greater than the NIS-mediated uptake. • The dose-dependent kinetics of SCN{sup −} was captured after an acute and chronic exposure. • The PBPK model of thiocyanate was successfully extrapolated to humans.

54 ENVIRONMENTAL SCIENCES↗