Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Resource Size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Architectural scaling tradeoffs in modular 3D bosonic quantum processors

We propose a modular three-dimensional bosonic quantum processor built from repeatable coupled-cavity modules linked by configurable interconnect networks. Using hardware-motivated graph-theoretic measures, we compare nearest-neighbor, hub-based, and hybrid architectures in terms of interconnect count, communication distance, resource concentration, and implementation complexity. Rather than identifying a universally optimal topology, our analysis shows how these architectures redistribute the costs of scaling, including wiring and port requirements, nonlocal communication distance, exposure to shared resources, routing bottlenecks, and scheduling overhead. Case studies of a \(3\times3\) processor and a larger hierarchical architecture further distinguish finite-size performance from asymptotic scaling. The resulting framework provides a systematic basis for evaluating modular three-dimensional bosonic processors and for identifying the device-level parameters required for quantitative hardware design.

Zhu, Shaojiang [Fermilab] (ORCID:0000000293180092)↗
NASA NTRS2022

Exploring the Clouds of Venus: Science Driven Aerobot Missions to Our Sister Planet

Venus is essential to our understanding of the evolution and habitability of Earth-size planets throughout the galaxy. The selection of the VERITAS, EnVision, and DAVINCI missions by NASA and ESA in June 2021 is an important step in advancing the science. However, addressing many of the most challenging questions will require in situ platforms that can operate in the Venus environment for extended periods in order to capture the full complexity of our sister planet. Aerobots are aerial vehicles that exploit buoyancy to achieve long-duration operation in the Venus cloud layer where environmental conditions are comparatively benign. Buoyancy control, explained in more detail in a companion paper at this conference, allows aerobots to change altitude with little energy expenditure enabling new scientific measurement opportunities. These include atmospheric chemistry, dynamics, geophysical measurements of the crust and interior and geological investigations enabled by high resolution surface imaging. One aspect to our approach to defining missions that fit within the resource constraints of competitive missions is keeping the scale small. Today’s science-driven appetite for sophisticated measurements and large volumes of data is driving size upwards but advances in technology can enable aerobots that can be delivered to Venus at manageable costs. The other aspect is supporting the aerobot at Venus with orbiters providing data relay, localization and synergistic science. The recently selected orbiters, equipped with low-cost proximity relay systems routinely used at Mars may obviate the need for dedicated orbiters thereby enabling Discovery mission candidates. Four aerobot mission concepts have been defined which fit comfortably within the current New Frontiers (NF) cost cap ($900M in $FY22). One of these concepts would also be a candidate for a Discovery mission if that cost cap ($500M in $FY19) were raised. Raising the NF cost cap would enable more capable aerobot missions combining both altitude control with synergistic orbital observations. Investigations of surface geology at high resolution with subcloud NIR nightside imaging and dropsondes on the dayside of Venus could also benefit from collaborations with foreign contributions.

"O'Rourke, Joseph"↗
NASA NTRS2012

Information Systems Coordinate Emergency Management

The rescue crews have been searching for the woman for nearly a week. Hurricane Katrina devastated Hancock County, the southernmost point in Mississippi, and the woman had stayed through the storm in her beach house. There is little hope of finding her alive; the search teams know she is gone because the house is gone. Late at night in the art classroom of the school that is serving as the county s emergency operations center, Craig Harvey is discussing the search with the center s commander. Harvey is the Chief Operating Officer of a unique company called NVision Solutions Inc., based at NASA s Stennis Space Center in Bay St. Louis, only a couple of miles away. He and his entire staff have set up a volunteer operation in the art room, supporting the emergency management efforts using technology and capabilities the company developed through its NASA partnerships. As he talks to the commander, Harvey feels an idea taking shape that might lead them to the woman s location. Working with surface elevation data and hydrological principles, Harvey creates a map showing how the floodwaters from the storm would have flowed along the topography of the region around the woman s former home. Using the map, search crews find the woman s body in 15 minutes. Recovering individuals who have been lost is a sad reality of emergency management in the wake of a disaster like Hurricane Katrina in 2005. But the sooner answers can be provided, the sooner a community s overall recovery can take place. When damage is extensive, resources are scattered, and people are in dire need of food, shelter, and medical assistance, the speed and efficiency of emergency operations can be the key to limiting the impact of a disaster and speeding the process of recovery. And a key to quick and effective emergency planning and response is geographic information. With a host of Earth-observing satellites orbiting the globe at all times, NASA generates an unmatched wealth of data about our ever-changing planet. This information can be captured, analyzed, and visualized by geographic information systems (GIS) to produce maps, charts, and other tools that can reveal information essential to a wide variety of applications including emergency management. Knowing precise, real-time information about the size, location, environmental conditions, and resulting damage of an event like a flood or wildfire as well as the location and numbers of emergency responders and other resources contributes directly to the effectiveness of disaster mitigation. The need for such information is also evident when responding to homeland security threats, such as a terrorist attack. Recognizing the value of its geospatial information resources for this and other purposes, in 1998 Stennis and the state of Mississippi partnered to form what became the Enterprise for Innovative Geospatial Solutions (EIGS) industry cluster, supporting the growth of remote sensing and GIS-based research and business. As part of EIGS, several companies partnered with NASA through dual use and Small Business Innovation Research (SBIR) contracts. Among those was NVision.

Source record↗
NASA NTRS2005

Tool for Sizing Analysis of the Advanced Life Support System

Advanced Life Support Sizing Analysis Tool (ALSSAT) is a computer model for sizing and analyzing designs of environmental-control and life support systems (ECLSS) for spacecraft and surface habitats involved in the exploration of Mars and Moon. It performs conceptual designs of advanced life support (ALS) subsystems that utilize physicochemical and biological processes to recycle air and water, and process wastes in order to reduce the need of resource resupply. By assuming steady-state operations, ALSSAT is a means of investigating combinations of such subsystems technologies and thereby assisting in determining the most cost-effective technology combination available. In fact, ALSSAT can perform sizing analysis of the ALS subsystems that are operated dynamically or steady in nature. Using the Microsoft Excel spreadsheet software with Visual Basic programming language, ALSSAT has been developed to perform multiple-case trade studies based on the calculated ECLSS mass, volume, power, and Equivalent System Mass, as well as parametric studies by varying the input parameters. ALSSAT s modular format is specifically designed for the ease of future maintenance and upgrades.

Yeh, Hue-Hsie Jannivine↗
DOE OSTI2020

Urbanization drives convergence in soil profile texture and carbon content

Urban development has driven extensive modification of the global landscape. This shift in land use and land cover alters ecological functioning, and thereby affects sustainable management agendas. Urbanization fundamentally reshapes the soils that underlay landscapes, and throughout the soil profile, extends impacts of urbanization far below the landscape surface. The impacts of urbanization on deeper soils that are beyond the reach of regular land management are largely unknown, and validation of general theories of convergent ecosystem properties are thwarted by a dearth of both level of measurement effort and the substantial heterogeneity in soils and urban landscapes. Here, we examined two soil properties with strong links to ecological functioning—carbon and mineral-fraction particle size—measured in urban soils, and compared them to their pre-urbanization conditions across a continental gradient encompassing global soil diversity. We hypothesized that urbanization drove convergence of soils properties from heterogeneous pre-urban conditions towards homogeneous urban conditions. Based on our observations, we confirm the hypothesis. Both soil carbon and particle size converged toward an intermediate value in the full data distribution, from pre-urban to urban conditions. These outcomes in urban soils were observed to uniformly be fine textured soils with overall lower carbon content. Although these properties are desirable for supporting urban infrastructure (e.g. buildings, pipes), they constrain the potential to render ecosystem services. Since soil profile texture and carbon content were convergent and observed across 11 cities, we suggest that these property profiles can be used as a universal urban soil profile to: 1) provide a clear prediction for how urbanization will shift soil properties from pre-urban conditions, 2) facilitate the adoption of commonly-accepted soil profiles for process models, and 3) offer a reference point to test against urban management strategies and how they impact soil resources.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Demonstration of Fluid Dynamics for Plant Growing Systems in Varied Gravity Environments Through Scaled Capillary Models

The development of reliable and bioregenerative crop growth production systems is vital for human exploration into deep space. As humans prepare for space travel beyond LEO, scientists need to find a way to provide reliable and adequate water delivery for all stages of the plant's life cycle. Past production systems struggled with this and often led to overwatering in the system. To better understand this issue, NASA's Plant Water Management (PWM) experiments were able to model fluid flow through granular substrates, specifically a clay-based material arcilite, in 0-G. The PWM study can help researchers to predict fluid flow through the systems, however their model only works for an arcilite based system and was unable to account for different stages of plant growth. For future missions, payload requirements to support crop production system will need to be limited, leading to the use of in situ resources. This project aims to validate the PWM experiments as well as incorporate various materials into the design for growth systems. To meet these objectives, a series of terrestrial experiments will be deployed to mimic all gravities. By modifying the material, fluid, and size of the test subjects, the effect of Earth's gravity can be minimized. This project will aid researchers in the design of future crop production systems for surface missions by creating a refined model that can be used at all stages of plant growth and utilize in situ resources.

Plant Biology↗
DOE OSTI2023

Challenges and Prospects of Sodium‐Ion and Potassium‐Ion Batteries for Mass Production

The exponential growth of the lithium‐ion (LIB) market is causing a significant disparity between the supply chain and demand for its resources. In this regard, sodium‐ion and potassium‐ion batteries are promising alternatives to LIBs due to their low cost. However, the larger sizes of Na + and K + ions create challenges that prevent them from achieving energy densities comparable to LIBs while maintaining an acceptable cycle life. Here, in this perspective, the aim is to evaluate the status of Na‐ion and K‐ion batteries and the challenges associated with them on both fundamental and commercial levels. The focus is on the structural instability arising from phase transitions during cycling, intricate chemical degradation processes, and potential avenues for enhancing their performance with a specific goal of improving their viability for grid‐scale energy storage. Materials production and abundance limitations for the chemistries of the state‐of‐the‐art materials and account for critical parameters from both the perspective of researchers and investors are analyzed. This analysis aims to provide insights into the strategic trade‐offs required to effectively implement the technology in real‐world applications, such as grid‐scale storage and other areas. Furthermore, the utilization of metals with low or no supply‐chain problems as an important aspect of these trade‐offs is considered.

25 ENERGY STORAGE↗
DOE OSTI2024

Performance of Heterogeneous Algorithm Scheduling in CMSSW

The CMS experiment started to utilize Graphics Processing Units (GPU) to accelerate the online reconstruction and event selection running on its High Level Trigger (HLT) farm in the 2022 data taking period. The projections of the HLT farm to the High-Luminosity LHC foresee a significant use of compute accelerators in the LHC Run 4 and onwards in order to keep the cost, size, and power budget of the farm under control. This direction of leveraging compute accelerators has synergies with the increasing use of HPC resources in HEP computing, as HPC machines are employing more and more compute accelerators that are predominantly GPUs today. In this work we review the features developed for the CMS data processing framework, CMSSW, to support the effective utilization of both compute accelerators and many-core CPUs within a highly concurrent task-based framework. We measure the impact of various design choices for the scheduling of heterogeneous algorithms on the event processing throughput, using the Run-3 HLT application as a realistic use case.

Bocci, Andrea↗
NASA NTRS1965

Lunar geothermal power - Some problems and potentials

Power from geothermal deposits on earth is an established fact, with plant capacities ranging from a few kilowatts to several hundred megawatts. The increasing evidence for contemporary volcanic and fumarolic activity on the moon lends strong support to the validity of the concepts of utilizing geothermal fluids as a source of lunar power. Geothermal energy, whatever the size of installation desired, will probably not be an energy source during early exploratory operations, because of the inherent uncertainty in developing natural resources. On the other hand, the attractiveness of geothermal concepts with their abundant potential for byproduct fuel and life-support production, plus the potential for large continuous power outputs, suggests chat the location and testing of areas of geothermal potential should be an early goa] for lunar exploration efforts. This paper briefly describes the chemical and structural properties of geothermal deposits and outlines the differences expected between lunar and terrestrial deposits and their surface expressions. The problems of finding geothermal deposits, and of then deciding upon the probable subsurface exploitive testing for initial production are suggested and the problems inherent in large-scale geothermal development and utilization are indicated.

ENERGY SOURCE↗
NASA NTRS1975

Potassium topping cycles for stationary power

A design study was made of the potassium topping cycle powerplant for central station use. Initially, powerplant performance and economics were studied parametrically by using an existing steam plant as the bottom part of the cycle. Two distinct powerplants were identified which had good thermodynamic and economic performance. Conceptual designs were made of these two powerplants in the 1200 MWe size, and capital and operating costs were estimated for these powerplants. A technical evaluation of these plants was made including conservation of fuel resources, environmental impact, technology status, and degree of development risk. It is concluded that the potassium topping cycle could have a significant impact on national goals such as air and water pollution control and conservation of natural resources because of its higher energy conversion efficiency.

Rossbach, R. J.↗
NASA NTRS1984

Civil benefits of the JVX

The inherently high productivity, VTOL capability, and low noise and vibration features of a civil version of the Joint Services Advanced Vertical Lift Aircraft, or 'JVX', are recommended for commercial exploitation. This tilt-rotor vehicle can provide ground and air traffic congestion relief through direct, city center-to-city center service, economically transporting 30 passengers for distances of up to 600 miles. Additional commercial opportunities emerge in the JVX's servicing of offshore, remote and infrastructureless areas. It is noted that Alaska, more than any other American state, would benefit from the JVX's VTOL access to natural resources and otherwise isolated settlements. The civilian development of the JVX could lead to the development of commercial tilt rotor aircraft for other size classes.

Zuk, J.↗
NASA NTRS1992

Dehydration kinetics and thermochemistry of selected hydrous phases, and simulated gas release pattern in carbonaceous chondrites

As part of our continued program of study on the volatile bearing phases and volatile resource potential of carbonaceous chondrite, results of our experimental studies on the dehydration kinetics of talc as a function of temperature and grain size (50 to 0.5 microns), equilibrium dehydration boundary of talc to 40 kbars, calorimetric study of enthalpy of formation of both natural and synthetic talc as a function of grain size, and preliminary results on the dehydration kinetics of epsomite are reported. In addition, theoretical calculations on the gas release pattern of Murchison meteorite, which is a C2(CM) carbonaceous chondrite, were performed. The kinetic study of talc leads to a dehydration rate constant for 40-50 microns size fraction of k = (3.23 x 10(exp 4))exp(-Q/RT)/min with the activation energy Q = 376 (plus or minus 20) kJ/mole. The dehydration rate was found to increase somewhat with decreasing grain size. The enthalpy of formation of talc from elements was measured to be -5896(10) kJ/mol. There was no measurable effect of grain size on the enthalpy beyond the limits of precision of the calorimetric studies. Also the calorimetric enthalpy of both synthetic and natural talc was found to be essentially the same, within the precision of measurements, although the natural talc had a slightly larger field of stability in our phase equilibrium studies. The high pressure experimental data the dehydration equilibrium of talc (talc = enstatite + coesite + H2O) is in strong disagreement with that calculated from the available thermochemical data, which were constrained to fit the low pressure experimental results. The calculated gas release pattern of Murchison meteorite were in reasonable agreement with that determined by stepwise heating in a gas chromatograph.

Bose, Kunal↗
DOE OSTI2024

Baseload Hydrogen Production Using Nuclear and Renewable Energy: A Comparative Analysis

As the global push towards net zero carbon gains momentum, the demand for clean hydrogen is expected to grow rapidly across various sectors, including transportation, industries and electrical grids. To meet this growing hydrogen demand, baseload hydrogen production facilities capable of providing a continuous and reliable supply of hydrogen will be necessary throughout the world. This paper explores the technoeconomic feasibility of establishing baseload electrolytic hydrogen production facilities in the United States, utilizing different clean generation resources. The key criteria include maintaining a consistent supply of clean hydrogen without putting baseload demand stress to already vulnerable power grid. In order to do that, the proposed facilities will host onsite clean power generation and energy storage technologies. The proposed facilities can capitalize on available investment and production incentives and have ability to export excess electricity to the utility at a bulk price. Several scenarios are considered based on the clean energy resources to support the electrolysis process including light water reactors (LWRs) currently evaluating retirement options, wind, solar PVs, and advanced small modular reactors (SMRs). For each scenario, a hypothetical hydrogen production facility is considered in a location in the US where the primary generation resource is at its peak strength. Comparative analysis in this paper reveal that the nuclear power plants are most economically viable for baseload hydrogen production facilities, outperforming renewable-based facilities with significantly lower levelized cost of hydrogen (LCOH). Even under best-case scenarios for resource availability, incentives and export prices, renewable-based facilities face challenges due to daily and seasonal generation variability, resulting in large installation sizes and lower capacity factors. Among renewable-based facilities, complementarity hybrids, providing more stable power supply, demonstrate superior economics compared to facilities based on a single renewable technology. While LWR-powered facility can achieve a negative LCOH with incentives, SMR-powered facilities can provide economic hydrogen supply with LCOH below $1/kg with high temperature electrolysis option. The analysis in this paper underscores the pivotal role of nuclear energy in the future hydrogen economy.

08 - HYDROGEN↗
NASA NTRS2006

Estimating Temperature Retrieval Accuracy Associated With Thermal Band Spatial Resolution Requirements for Center Pivot Irrigation Monitoring and Management

This study explores the use of synthetic thermal center pivot irrigation scenes to estimate temperature retrieval accuracy for thermal remote sensed data, such as data acquired from current and proposed Landsat-like thermal systems. Center pivot irrigation is a common practice in the western United States and in other parts of the world where water resources are scarce. Wide-area ET (evapotranspiration) estimates and reliable water management decisions depend on accurate temperature information retrieval from remotely sensed data. Spatial resolution, sensor noise, and the temperature step between a field and its surrounding area impose limits on the ability to retrieve temperature information. Spatial resolution is an interrelationship between GSD (ground sample distance) and a measure of image sharpness, such as edge response or edge slope. Edge response and edge slope are intuitive, and direct measures of spatial resolution are easier to visualize and estimate than the more common Modulation Transfer Function or Point Spread Function. For these reasons, recent data specifications, such as those for the LDCM (Landsat Data Continuity Mission), have used GSD and edge response to specify spatial resolution. For this study, we have defined a 400-800 m diameter center pivot irrigation area with a large 25 K temperature step associated with a 300 K well-watered field surrounded by an infinite 325 K dry area. In this context, we defined the benchmark problem as an easily modeled, highly common stressing case. By parametrically varying GSD (30-240 m) and edge slope, we determined the number of pixels and field area fraction that meet a given temperature accuracy estimate for 400-m, 600-m, and 800-m diameter field sizes. Results of this project will help assess the utility of proposed specifications for the LDCM and other future thermal remote sensing missions and for water resource management.

Ryan, Robert E.↗
NASA NTRS2018

Volatiles Loss from Water Bearing Regolith Simulant at Lunar Environments

In-Situ Resource Utilization (ISRU) enables future planetary exploration by using local resources to acquire mission consumables. Water-bearing regolith has been identified on the moon in the permanently shadowed craters. Missions designed to retrieve these resources will require testing in relevant environments. The Planetary Surface Simulation Facility (otherwise known as VF-13) at the NASA Glenn Research Center can create these relevant environments for ground based testing. This dirty thermal vacuum chamber is 3.6 m tall, 1.5 m in diameter, and can achieve pressures on the order of 10-6 Torr. The internal wall of the chamber and the soil bin are separately temperature controlled using liquid nitrogen. For the past four years, the chamber has been used by NASA's Resource Prospector to characterize volatiles loss during regolith sampling operations. Observations from 43 samples suggest agitating the sample during delivery has a significant impact on the volatiles loss. Calculated mass loss rates are consistent for similar size samples. However, the variations in moisture loss do not clearly correlate with measured conditions. Continued testing will examine the impacts of the mechanical sample delivery process.

In Situ Resource Utilization↗
DOE OSTI2022

A chromosome-level genome assembly of the Chinese cork oak (Quercus variabilis)

Quercus variabilis (Fagaceae) is an ecologically and economically important deciduous broadleaved tree species native to and widespread in East Asia. It is a valuable woody species and an indicator of local forest health, and occupies a dominant position in forest ecosystems in East Asia. However, genomic resources from Q. variabilis are still lacking. Here, we present a high-quality Q. variabilis genome generated by PacBio HiFi and Hi-C sequencing. The assembled genome size is 787 Mb, with a contig N50 of 26.04 Mb and scaffold N50 of 64.86 Mb, comprising 12 pseudo-chromosomes. The repetitive sequences constitute 67.6% of the genome, of which the majority are long terminal repeats, accounting for 46.62% of the genome. We used ab initio , RNA sequence-based and homology-based predictions to identify protein-coding genes. A total of 32,466 protein-coding genes were identified, of which 95.11% could be functionally annotated. Evolutionary analysis showed that Q. variabilis was more closely related to Q. suber than to Q. lobata or Q. robur. We found no evidence for species-specific whole genome duplications in Quercus after the species had diverged. This study provides the first genome assembly and the first gene annotation data for Q. variabilis. These resources will inform the design of further breeding strategies, and will be valuable in the study of genome editing and comparative genomics in oak species.

Han, Biao↗
DOE OSTI2021

Adaptive Variational Quantum Imaginary Time Evolution Approach for Ground State Preparation

Abstract An adaptive variational quantum imaginary time evolution (AVQITE) approach is introduced that yields efficient representations of ground states for interacting Hamiltonians on near‐term quantum computers. It is based on McLachlan's variational principle applied to imaginary time evolution of variational wave functions. The variational parameters evolve deterministically according to equations of motions that minimize the difference to the exact imaginary time evolution, which is quantified by the McLachlan distance. Rather than working with a fixed variational ansatz, where the McLachlan distance is constrained by the quality of the ansatz, the AVQITE method iteratively expands the ansatz along the dynamical path to keep the McLachlan distance below a chosen threshold. This ensures the state is able to follow the quantum imaginary time evolution path in the system Hilbert space rather than in a restricted variational manifold set by a predefined fixed ansatz. AVQITE is used to prepare ground states of H 4 , H 2 O, and BeH 2 molecules, where it yields compact variational ansätze and ground state energies within chemical accuracy. Polynomial scaling of circuit depth with system size is shown through a set of AVQITE calculations of quantum spin models. Finally, quantum Lanczos calculations are demonstrated alongside AVQITE without additional quantum resource costs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

The reference genome and abiotic stress responses of the model perennial grass Brachypodium sylvaticum

Abstract Perennial grasses are important forage crops and emerging biomass crops and have the potential to be more sustainable grain crops. However, most perennial grass crops are difficult experimental subjects due to their large size, difficult genetics, and/or their recalcitrance to transformation. Thus, a tractable model perennial grass could be used to rapidly make discoveries that can be translated to perennial grass crops. Brachypodium sylvaticum has the potential to serve as such a model because of its small size, rapid generation time, simple genetics, and transformability. Here, we provide a high-quality genome assembly and annotation for B. sylvaticum, an essential resource for a modern model system. In addition, we conducted transcriptomic studies under 4 abiotic stresses (water, heat, salt, and freezing). Our results indicate that crowns are more responsive to freezing than leaves which may help them overwinter. We observed extensive transcriptional responses with varying temporal dynamics to all abiotic stresses, including classic heat-responsive genes. These results can be used to form testable hypotheses about how perennial grasses respond to these stresses. Taken together, these results will allow B. sylvaticum to serve as a truly tractable perennial model system.

59 BASIC BIOLOGICAL SCIENCES↗