SEARCH · Engineering Papers

Results for “Radiative transfer simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Atomic oxygen in the Martian thermosphere

Modern models of thermospheric composition and temperature and of excitation and radiative transfer processes are used to simulate the O I 130-nm emission from Mars measured by the Mariner 9 ultraviolet spectrometer. This paper uses the Mars thermospheric general circulation model calculations (MTGCM) of Bougher et al. (1988) and the Monte Carlo partial frequency redistribution multiple scattering code of Meier and Lee (1982). It is found that the decline in atomic oxygen through the daylight hours predicted by the MTGCM cannot be reconciled with the excess afternoon brightness seen in the data. Oxygen concentrations inferred from the data show a positive gradient through the day, in agreement with the original analysis by Strickland et al. (1973). In addition, the data suggest that the oxygen abundance increases toward high southerly latitudes, in contrast with the MTGCM prediction of high values in the Northern Hemisphere. It appears that solar forcing alone cannot account for the observed characteristics of the Martian thermosphere and that wave and tidal effects may profoundly affect the structure, winds, and composition.

Stewart, A. I. F.↗

NASA NTRS1993

Probing Venus's cloud structure with Galileo NIMS

The spectral image cubes obtained by the Near-Infrared Mapping Spectrometer (NIMS) on Galileo as it flew by Venus have been analyzed to constrain the vertical structure of the clouds, the nature of the aerosol particles, and the location and particle properties of the opacity variations responsible for high-contrast features observed in the near-infrared windows at 1.7 and 2.3 micrometers. A radiative transfer program was used to simulate mid-latitude curves of limb darkening at 3.7 micrometers. Best-fit models to these curves demonstrate that the upper clouds are dominated by mode 2 particles (r-bar = 1.0 micrometers), with a contribution of approximately 15% of opacity from mode 1 particles (r-bar = 0.3 micrometers). The low-latitude upper cloud is well represented by a dual scale-height model, with a particle scale height of approximately 1 km from an altitude of 61-63 km, and a scale height of approximately 6 km above this, up to the level where tau = 1 at approximately 71 km. This model also successfully simulates limb-darkening curves at 11.5 micrometers from the Pioneer Venus Orbiter Infrared Radiometer. Successful simulations of correlation plots of 1.7 vs 2.3 micrometers intensities reveal that mode 3 particles (r-bar = 3.65 micrometers) represent the dominant source of opacity in the lower and middle clouds, and that variation in total cloud opacity reflects chiefly the addition and removal of mode 3 particles near the cloud base. We find that the full spectrum of brightnesses at 1.7 and 2.3 micrometers implies that the total cloud optical depth varies from approximately 25 to approximately 40.

Grinspoon, D. H.↗

NASA NTRS2000

Reionization of the Universe and the Photoevaporation of Cosmological Minihalos

The first sources of ionizing radiation to condense out of the dark and neutral Intergalactic Medium (IGM) sent ionization fronts sweeping outward through their surroundings, overtaking other condensed objects and photoevaporating them. This feedback effect of universal reionization on cosmic structure formation is demonstrated here for the case of a cosmological minihalo of dark matter and baryons exposed to an external source of ionizing radiation with a quasar-like spectrum, just after the passage of the global ionization front created by the source. We model the pre-ionization minihalo as a truncated, nonsingular isothermal sphere in hydrostatic equilibrium following its collapse out of the expanding background universe and virialization. Results are presented of the first, gas dynamical simulations of this process, including radiative transfer. A sample of observational diagnostics is also presented, including the spatially-varying ionization levels of C, N, and O in the flow if a trace of heavy elements is present and the integrated column densities of H I, He I and He II, and C IV through the photoevaporating gas at different velocities, which would be measured in absorption against a background source like that responsible for the ionization.

Shapiro, Paul R.↗

NASA NTRS2002

Retrieval Of Cloud Pressure And Chlorophyll Content Using Raman Scattering In GOME Ultraviolet Spectra

Reliable cloud pressure estimates are needed for accurate retrieval of ozone and other trace gases using satellite-borne backscatter ultraviolet (buv) instruments such as the global ozone monitoring experiment (GOME). Cloud pressure can be derived from buv instruments by utilizing the properties of rotational-Raman scattering (RRS) and absorption by O2-O2. In this paper we estimate cloud pressure from GOME observations in the 355-400 nm spectral range using the concept of a Lambertian-equivalent reflectivity (LER) surface. GOME has full spectral coverage in this range at relatively high spectral resolution with a very high signal-to-noise ratio. This allows for much more accurate estimates of cloud pressure than were possible with its predecessors SBUV and TOMS. We also demonstrate the potential capability to retrieve chlorophyll content with full-spectral buv instruments. We compare our retrieved LER cloud pressure with cloud top pressures derived from the infrared ATSR instrument on the same satellite. The findings confirm results from previous studies that showed retrieved LER cloud pressures from buv observations are systematically higher than IR-derived cloud-top pressure. Simulations using Mie-scattering radiative transfer algorithms that include O2-O2 absorption and RRS show that these differences can be explained by increased photon path length within and below cloud.

Atlas, Robert↗

NASA NTRS2004

The Cold Land Processes Experiment (CLPX-1): Analysis and Modelling of LSOS Data (IOP3 Period)

Microwave brightness temperatures at 18.7,36.5, and 89 GHz collected at the Local-Scale Observation Site (LSOS) of the NASA Cold-Land Processes Field Experiment in February, 2003 (third Intensive Observation Period) were simulated using a Dense Media Radiative Transfer model (DMRT), based on the Quasi Crystalline Approximation with Coherent Potential (QCA-CP). Inputs to the model were averaged from LSOS snow pit measurements, although different averages were used for the lower frequencies vs. the highest one, due to the different penetration depths and to the stratigraphy of the snowpack. Mean snow particle radius was computed as a best-fit parameter. Results show that the model was able to reproduce satisfactorily brightness temperatures measured by the University of Tokyo s Ground Based Microwave Radiometer system (CBMR-7). The values of the best-fit snow particle radii were found to fall within the range of values obtained by averaging the field-measured mean particle sizes for the three classes of Small, Medium and Large grain sizes measured at the LSOS site.

Tedesco, Marco↗

NASA NTRS1995

Coherent Effects in Microwave Backscattering Models for Forest Canopies

In modeling forest canopies, several scattering mechanisms are taken into account: 1) volume scattering, 2) surface-volume interaction, and 3) surface scattering from forest floor. Depending on the structural and dielectric characteristics of forest canopies, the relative contribution of each mechanism in the total backscatter signal of an imaging radar can vary. In this paper, two commonly used first order discrete scattering models, Distorted Born Approximation (DBA) and Radiative Transfer (RT) are used to simulate the backscattered power received by polarimetric radars at P-, L-, and C-bands over coniferous and deciduous forests. The difference between the two models resides on the coherent effect in the surface-volume interaction terms.

Microwave Backscattering Models↗

NASA NTRS2006

3-D GRMHD Simulations of Disk-Jet Coupling and Emission

We have performed a fully 3-D GRMHD simulation of jet formation from a thin accretion disk around a Schwarzschild black hole with a free-falling corona. The simulation results show that a bipolar jet is initially created. At later times, the accretion disk becomes thick and the jet fades resulting in a wind that is ejected from the surface of the thickened (torus-like) disk. This evolution of disk-jet coupling suggests that the jet fades with a thickened accretion disk. Recently we have developed two new codes: 3 -D GRMHD: RelAtivIStic magnetoHydrodynamica1 sImulatioN (RAISHIN) code constructed by modern high-resolution shock-capturing (HRSC) techniques and 3-D GRPIC code. We have calculated free-free and synchrotron emission from the disks and jet/outflows obtained from our GRMHD simulations using a fully covariant radiative transfer formulation.

Nishikawa, K.-I.↗

NASA NTRS2007

High Performance Simulations of Accretion Disk Dynamics and Jet Formations Around Kerr Black Holes

We investigate jet formation in black-hole systems using 3-D General Relativistic Particle-In-Cell (GRPIC) and 3-D GRMHD simulations. GRPIC simulations, which allow charge separations in a collisionless plasma, do not need to invoke the frozen condition as in GRMHD simulations. 3-D GRPIC simulations show that jets are launched from Kerr black holes as in 3-D GRMHD simulations, but jet formation in the two cases may not be identical. Comparative study of black hole systems with GRPIC and GRMHD simulations with the inclusion of radiate transfer will further clarify the mechanisms that drive the evolution of disk-jet systems.

Nishikawa, Ken-Ichi↗

NASA NTRS2008

A Global Model Simulation of Aerosol Effects of Surface Radiation Budget- Toward Understanding of the "Dimming to Brightening" Transition

We present a global model study on the role aerosols play in the change of solar radiation at Earth's surface that transitioned from a decreasing (dimming) trend to an increasing (brightening) trend. Our primary objective is to understand the relationship between the long-term trends of aerosol emission, atmospheric burden, and surface solar radiation. More specifically, we use the recently compiled comprehensive global emission datasets of aerosols and precursors from fuel combustion, biomass burning, volcanic eruptions and other sources from 1980 to 2006 to simulate long-term variations of aerosol distributions and optical properties, and then calculate the multi-decadal changes of short-wave radiative fluxes at the surface and at the top of the atmosphere by coupling the GOCART model simulated aerosols with the Goddard radiative transfer model. The model results are compared with long-term observational records from ground-based networks and satellite data. We will address the following critical questions: To what extent can the observed surface solar radiation trends, known as the transition from dimming to brightening, be explained by the changes of anthropogenic and natural aerosol loading on global and regional scales? What are the relative contributions of local emission and long-range transport to the surface radiation budget and how do these contributions change with time?

Chin, Mian↗

NASA NTRS2013

Uncertainty Quantification of GEOS-5 L-band Radiative Transfer Model Parameters Using Bayesian Inference and SMOS Observations

Uncertainties in L-band (1.4 GHz) radiative transfer modeling (RTM) affect the simulation of brightness temperatures (Tb) over land and the inversion of satellite-observed Tb into soil moisture retrievals. In particular, accurate estimates of the microwave soil roughness, vegetation opacity and scattering albedo for large-scale applications are difficult to obtain from field studies and often lack an uncertainty estimate. Here, a Markov Chain Monte Carlo (MCMC) simulation method is used to determine satellite-scale estimates of RTM parameters and their posterior uncertainty by minimizing the misfit between long-term averages and standard deviations of simulated and observed Tb at a range of incidence angles, at horizontal and vertical polarization, and for morning and evening overpasses. Tb simulations are generated with the Goddard Earth Observing System (GEOS-5) and confronted with Tb observations from the Soil Moisture Ocean Salinity (SMOS) mission. The MCMC algorithm suggests that the relative uncertainty of the RTM parameter estimates is typically less than 25 of the maximum a posteriori density (MAP) parameter value. Furthermore, the actual root-mean-square-differences in long-term Tb averages and standard deviations are found consistent with the respective estimated total simulation and observation error standard deviations of m3.1K and s2.4K. It is also shown that the MAP parameter values estimated through MCMC simulation are in close agreement with those obtained with Particle Swarm Optimization (PSO).

MCMC↗

NASA NTRS2015

Principle Component Analysis of AIRS and CrIS Data

Synthetic Eigen Vectors (EV) used for the statistical analysis of the PC reconstruction residual of large ensembles of data are a novel tool for the analysis of data from hyperspectral infrared sounders like the Atmospheric Infrared Sounder (AIRS) on the EOS Aqua and the Cross-track Infrared Sounder (CrIS) on the SUOMI polar orbiting satellites. Unlike empirical EV, which are derived from the observed spectra, the synthetic EV are derived from a large ensemble of spectra which are calculated assuming that, given a state of the atmosphere, the spectra created by the instrument can be accurately calculated. The synthetic EV are then used to reconstruct the observed spectra. The analysis of the differences between the observed spectra and the reconstructed spectra for Simultaneous Nadir Overpasses of tropical oceans reveals unexpected differences at the more than 200 mK level under relatively clear conditions, particularly in the mid-wave water vapor channels of CrIS. The repeatability of these differences using independently trained SEV and results from different years appears to rule out inconsistencies in the radiative transfer algorithm or the data simulation. The reasons for these discrepancies are under evaluation.

infrared↗

NASA NTRSDate not supplied

TPSAS-NF1676L-10726-DND

The principal component radiative transfer model PCRTM (Xu 2006) simulates spectral longwave radiance at a 0.5cm-1 resolution over the wavelengths (50-2760cm-1) using 280 principal components. The CERES product SSF containing CERES field-of-view (FOV) cloud properties based on MODIS pixel information are used as inputs. NASA GMAO(Global Modeling and Assimilation Office)Geos-4 temperature and humidity profiles, as well as SMOBA (Stratosphere Monitoring Ozone Blended Analysis) ozone profiles allow computations for five years (Jan 2001- Dec 2006) of FOV nadir spectral radiance. The approximately twice daily FOV PCRTM simulations along with CERES broadband measurements are time-space averaged to 10deg zonal monthly data. Analysis of monthly seasonal and deseasonalized interannual variability in terms of brightness temperature are presented. Comparison of interannual variability in the portions of the spectrum seen by the AIRS instrument are shown. Comparisons of spectral integrated PCRTM simulations to CERES broadband longwave radiance measurements are made. In order to study the sensitivity of the spatially and temporally averaged TOA spectrum to various atmospheric properties, we perturbed atmospheric and surface temperatures, humidity, cloud height, cloud fraction, and particle size. The sensitivity of the spectrum to these properties depends on region and seasons. Month to month variability of the longwave spectra to these perturbations is 10 to 20% of the global monthly mean perturbation response. In addition, it depends on time period and size of the area used for averaging spectra. In this poster, the magnitude of sensitivity variability and how the sensitivity changes depending on temporal and spatial scale of averaging will be discussed.

Fred G. Rose↗

NASA NTRS2022

A Novel Atmospheric Correction Algorithm to Exploit the Diurnal Variability in Hypertemporal Geostationary Observations

This study developed a new atmospheric correction algorithm, GeoNEX-AC, that is independent from the traditional use of spectral band ratios but dedicated to exploiting information from the diurnal variability in the hypertemporal geostationary observations. The algorithm starts by evaluating smooth segments of the diurnal time series of the top-of-atmosphere (TOA) reflectance to identify clear-sky and snow-free observations. It then attempts to retrieve the Ross-Thick–Li-Sparse (RTLS) surface bi-directional reflectance distribution function (BRDF) parameters and the daily mean atmospheric optical depth (AOD) with an atmospheric radiative transfer model (RTM) to optimally simulate the observed diurnal variability in the clear-sky TOA reflectance. Once the initial RTLS parameters are retrieved after the algorithm’s burn-in period, they serve as the prior information to estimate the AOD levels for the following days and update the surface BRDF information with the new clear-sky observations. This process is iterated through the full time span of the observations, skipping only totally cloudy days or when surface snow is detected. We tested the algorithm over various Aerosol Robotic Network (AERONET) sites and the retrieved results well agree with the ground-based measurements. This study demonstrates that the high-frequency diurnal geostationary observations contain unique information that can help to address the atmospheric correction problem from new directions.

atmospheric correction↗

NASA NTRSDate not supplied

Improved Peatland Hydrology and L-Band Microwave Radiative Transfer Modeling in Version 7 of the SMAP Level-4 Soil Moisture Data Assimilation Product

The NASA Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides global, 9-km resolution, 3-hourly surface (0-5 cm) and root-zone (0-100 cm) soil moisture from April 2015 to present with a mean latency of 2.5 days from the time of observation. The L4_SM estimates are derived from the assimilation of SMAP L-band (1.4 GHz) brightness temperature (Tb) observations into the NASA Catchment land surface model. The recently released Version 7 of L4_SM comprises two key advances. First, the Catchment model now includes the recently developed PEATCLSM hydrology module for peatlands and uses an updated global map of peatlands. Second, revised parameters are used in the L-band radiative transfer model that converts the simulated soil moisture and temperature estimates into Tb predictions for use in the radiance-based L4_SM analysis. Specifically, the L-band scattering albedo, soil roughness, and vegetation opacity climatology are obtained from the SMAP Level-2 dual-channel soil moisture retrieval product. In this presentation, we examine the improvements gained with the model and parameter changes. In peatlands, the dynamics of water table depth, surface soil moisture and evapotranspiration are considerably improved in L4_SM Version 7 over Version 6 when evaluated against in situ measurements. These improvements are also manifested in smaller Tb observation-minus-forecast residuals.

SMAP↗

NASA NTRSDate not supplied

Principal Component-Based Radiative Transfer Model (PCRTM) for Hyperspectral Remote Sensors for UV, VVIS, NIR, IR, and FIR Spectral Regions

Fast and accurate radiative transfer models are needed to efficiently process satellite hyperspectral remote sensors. We have developed a Principal Component-based radiative transfer model (PCRTM) which can simulate TOA radiance or reflectance spectra in the cloudy atmosphere for far IR, IR, NIR, VIS, and UV spectral regions quickly and accurately. Multi-scattering of multiple layers of clouds/aerosols is included in the model. Polarization components can also be calculated. The computation speed is 3 to 4 orders of magnitude faster than MODTRAN5, LBLRTM, and VLIDORT. The PCRTM calculated radiance spectra agree with reference RTM calculated radiance spectra very well (0.03 K in IR and 0.05% in solar). Comparisons of the PCRTM model calculations with observed AIRS, CrIS, IASI, NAST-I, and SCIAMACHY data will be presented. The solar-PCRTM has been developed for CLARREO PathFinder (CPF) and has been extensively used for CPF science algorithms. The PCRTM can also be used for many current and future NASA future missions such as EMIT, SBG, TEMPO, and PACE.

pcrtm↗

NASA NTRSDate not supplied

A Principal-Component-Based Radiative Transfer Model (PCRTM) for Hyperspectral Shortwave and Longwave Satellite Sensors and Its Applications

The radiative transfer model (RTM) or forward model is an essential component in satellite remote sensing. For modern hyperspectral remote sensors, fast and accurate RTMs are needed due to a large number of spectral dimensions and high spatial resolutions. We will describe a Principal Component-based radiative transfer model (PCRTM) which can simulate the top-of-atmosphere (TOA) radiance or reflectance spectra 250 nm to 2000 micrometers quickly and accurately. The PCRTM has been demonstrated to be extremely accurate, compared to the line-by-line RTM benchmarks, and the former is several orders more computationally efficient than the latter. We will demonstrate how the PCRTM and the associated inversion algorithms are used to infer atmospheric temperature, moisture, and trace gas profiles, as well as cloud and surface properties from hyperspectral IR sounders such as Atomspheric Infrared Souder (AIRS) and Cross-track Infrared Sounder (CrIS). High-quality climate records for a 20-year duration have been derived from these IR hyperspectral data. Finally, we will show some examples of using PCRTM to retrieve cloud properties from Earth Surface Mineral Dust Source Investigation (EMIT) and its applicability of PCRTM to future missions such as the CLARREO (Climate Absolute Radiance and Refractivity Observatory) Pathfinder (CPF) CPF and the Surface Biology and Geology (SBG).

Xu Liu↗

NASA NTRS2024

Enabling the Assimilation of CrIS Shortwave Infrared Observations in Global NWP at NOAA. Part I: Background and Methods

Radiance observations from Earth-observing satellites have a significant positive impact on numerical weather prediction (NWP) forecasts, but some spectral regions are not fully exploited. Observations from hyperspectral infrared (IR) sounders in the longwave region (650-1100 cm -1 ), for instance, are routinely assimilated in many NWP models, but observations in the shortwave region (2155-2550 cm -1 ) are not. Each of these regions provides information on the temperature structure of the atmosphere, but the shortwave IR (SWIR) region is considered challenging to assimilate due to noise equivalent delta temperature (NEDT) that is highly variable depending on scene brightness temperature and to phenomena that are difficult to model, like non-Local Thermodynamic Equilibrium (NLTE) and solar reflectance. With recent advances in small-satellite technology, SWIR temperature sounders may provide an agile and cost-effective complement to the current constellation of IR sounders. Therefore, a better understanding of the use and impact of SWIR observations in data assimilation for NWP is warranted. In part one of this study, as presented here, the amount of unique information (as determined by Empirical Orthogonal Decomposition (EOD)) made available to a data assimilation system by Cross-track Infrared Sounder (CrIS) SWIR observations is reviewed, recent advancements to the Community Radiative Transfer Model (CRTM) for the simulation of CrIS shortwave radiances are tested, and enhancements to NOAA’s Global Data Assimilation System (GDAS) for the assimilation of CrIS SWIR observations are implemented and evaluated. Part two of this study, which seeks to assess the value of assimilating shortwave IR observations in global NWP, is also introduced.

Erin Jones↗

NASA NTRS1994

Radiative interactions in chemically reacting compressible nozzle flows using Monte Carlo simulations

The two-dimensional spatially elliptic Navier-Stokes equations have been used to investigate the radiative interactions in chemically reacting compressible flows of premixed hydrogen and air in an expanding nozzle. The radiative heat transfer term in the energy equation is simulated using the Monte Carlo method (MCM). The nongray model employed is based on the statistical narrow band model with an exponential-tailed inverse intensity distribution. The spectral correlation has been considered in the Monte Carlo formulations. Results obtained demonstrate that the effect of radiation on the flow field is minimal but its effect on the wall heat transfer is significant. Extensive parametric studies are conducted to investigate the effects of equivalence ratio, wall temperature, inlet flow temperature, and the nozzle size on the radiative and conductive wall fluxes.

Liu, J.↗