Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROUTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Grain boundary character distribution in nanocrystalline metals produced by different processing routes

Nanocrystalline materials are defined by their fine grain size, but details of the grain boundary character distribution should also be important. Grain boundary character distributions are reported for ball-milled, sputter-deposited, and electrodeposited Ni and Ni-based alloys, all with average grain sizes of ~20 nm, to study the influence of processing route. The two deposited materials had nearly identical grain boundary character distributions, both marked by a Σ3 length percentage of 23 to 25 pct. In contrast, the ball-milled material had only 3 pct Σ3-type grain boundaries and a large fraction of low-angle boundaries (16 pct), with the remainder being predominantly random high angle (73 pct). Furthermore, these grain boundary character measurements are connected to the physical events that control their respective processing routes. Consequences for material properties are also discussed with a focus on nanocrystalline corrosion. As a whole, the results presented here show that grain boundary character distribution, which has often been overlooked in nanocrystalline metals, can vary significantly and influence material properties in profound ways.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Comparison of Different Processing Routes for the Synthesis of Semiconducting AlSb

AlSb is a low-cost, high-band-gap semiconducting material, yet largely limited in its potential due to difficulty in the synthesis of single-phase AlSb. The present work compares different processing routes in their potency to produce bulk and nanocrystalline AlSb. Vacuum arc melting has been successfully employed, for the first time, to synthesize single-phase bulk AlSb. Owing to high vapor pressure of Sb, an optimum amount of excess Sb (3%) needs to be added to achieve single-phase line compound AlSb. Two methods, viz. mechanical alloying of elemental powders and mechanical milling of cast alloy, have been used to synthesize nanocrystalline AlSb. Nanocrystalline AlSb could be produced after ball milling the cast alloy; however, prolonged milling results in the appearance of Sb along with a non-stoichiometric Al-Sb-O oxide. Mechanical alloying of Al and Sb does not lead to appearance of single-phase AlSb, and the mixture largely consists of starting material and amorphous products. Therefore, the effectiveness of a synthesis route in producing single-phase AlSb is governed by the tendency of oxygen pickup during the processing.

36 MATERIALS SCIENCE↗
DOE OSTI2019

On the Road to Regeneration: “Tools” and “Routes” Towards Efficient Cardiac Cell Therapy for Ischemic Cardiomyopathy

Purpose of Review: Cardiac regenerative medicine is a field bridging together biotechnology and surgical science. In this review, we present the explored surgical roads to cell delivery and the known effects of each delivery method on cell therapy efficiency. We also list the more recent clinical trials, exploring the safety and efficacy of delivery routes used for cardiac cell therapy approaches. Recent Findings: There is no consensus in defining which way is the most suitable for the delivery of the different therapeutic cell types to the damaged heart tissue. In addition, it emerged that the “delivery issue” has not been systematically addressed in each clinical trial and for each and every cell type capable of cardiac repair. Summary: Cardiac damage occurring after an ischemic insult triggers a cascade of cellular events, eventually leading to heart failure through fibrosis and maladaptive remodelling. None of the pharmacological or medical interventions approved so far can rescue or reverse this phenomenon, and cardiovascular diseases are still the leading cause of death in the western world. Therefore, for nearly 20 years, regenerative medicine approaches have focused on cell therapy as a promising road to pursue, with numerous preclinical and clinical testing of cell-based therapies being studied and developed. Nonetheless, consistent clinical results are still missing to reach consensus on the most effective strategy for ischemic cardiomyopathy, based on patient selection, diagnosis and stage of the disease, therapeutic cell type, and delivery route.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2018

A way to optimally solve a green time-dependent vehicle routing problem with time windows

This study presents a novel approach to solve the vehicle routing problem by focusing on greenhouse gas emissions and fuel consumption aiming to mitigate adverse environmental effects of transportation. A time-dependent model with time windows is developed to incorporate speed and schedule in transportation planning. The model considers speed limits for different times of the day in a realistic delivery context. Due to the complexity of solving the model, a graph transformation approach is proposed to reduce the complexity of the problem. By means of several steps, the problem is transformed into a vehicle routing problem without time windows. In this way, we can reduce the complexity of the problem. Our method can be used in practice to decrease fuel consumption and greenhouse gas emissions, while total cost is also controlled to some extent. Finally, future research directions and conclusion remarks are provided.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Distributed renewable energy resource trust metrics and secure routing

To ensure reliable and predictable service in the electrical grid between distributed renewable distributed energy resources (DERs) it is important to gauge the level of trust present within critical components and DER aggregators (DERAs). Although trust throughout a smart grid is temporal and dynamically varies according to measured states, it is possible to accurately formulate communications and service level strategies based on such trust measurements. Utilizing an effective set of machine learning and statistical methods, it is shown that establishment of trust levels between DERAs using behavioral pattern analysis is possible. Further, it is also shown that the establishment of such trust can facilitate simple secure communications routing between DERAs. Providing secure routing between DERAs enables a grid operator to maintain service level agreements to its customers, reduce the attack surface and increase operational resiliency.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

First evidences of Amazonian wildlife feeding on petroleum-contaminated soils: A new exposure route to petrogenic compounds?

Highlights: • First evidences prove that Amazonian wildlife consume petroleum-contaminated soil. • Geophagy may emerge as an important exposure route to petrogenic pollution. • It is urgent to assess the health risks for populations relying on subsistence hunting. • There are substantial gaps in our knowledge of the health impacts of oil extraction. Videos recorded with infrared camera traps placed in petroleum contaminated areas of the Peruvian Amazon have shown that four wildlife species, the most important for indigenous peoples’ diet (lowland tapir, paca, red-brocket deer and collared peccary), consume oil-contaminated soils and water. Further research is needed to clarify whether Amazonian wildlife's geophagy can be a route of exposure to petrogenic contamination for populations living in the vicinity of oil extraction areas and relying on subsistence hunting.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Unimolecular and bimolecular formic acid decomposition routes on dispersed Cu nanoparticles

The elementary steps and site requirements in formic acid (HCOOH) dehydrogenation on Cu surfaces remain of keen interest because formate species act as intermediates or spectators in methanol synthesis and water–gas shift reactions. Steady-state and transient kinetic data, isotopic effects, infrared spectra during catalytic and stoichiometric reactions, and theoretical treatments based on density functional theory (DFT) provide evidence for bimolecular reactions, in which saturated bidentate formate (*HCOO*) adlayers, present at 0.25 ML (0.25 *HCOO* per surface Cu atom), react with undissociated species (HCOOH$^\square$) bound at interstices within formate adlayers ($^\square$) to form H-bonded bimolecular HCOOH$^\square$-*HCOO* adducts. The co-existence of vicinal HCOOH$^\square$ and *HCOO* moieties is evident from antisymmetric infrared bands for *HCOO* that become stronger as a result of their H-bonding that perturbs the induced dipole moment of *HCOO* upon vibration, consistent with DFT-derived vibrational frequencies and intensities for such perturbed species. The *HCOO* moiety in this complex undergoes C-H activation via a transition state that is preferentially stabilized through H-bonding with the vicinal HCOOH$^\square$ relative to its *HCOO* precursor. DFT-derived HCOOH dehydrogenation activation barriers and those determined from the evolution of CO 2 from pre-adsorbed *HCOO* species are about 10 kJ mol -1 smaller in the presence of gaseous HCOOH reactants (because of HCOOH$^\square$-*HCOO* interactions) than those for the unimolecular decomposition of bound *HCOO* species. Such bimolecular routes are consistent with measured effects of HCOOH, H 2 , and CO pressures and of H/D isotopic substitution on dehydrogenation turnover rates and represent the predominant channel for the formation of CO 2 and H 2 during catalytic HCOOH dehydrogenation on Cu nanoparticles. A saturated *HCOO* adlayer that retains binding interstices and the presence of HCOOH(g) enable a sequence of elementary steps unavailable for *HCOO* species, thus circumventing unassisted unimolecular routes that exhibit higher activation barriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Low-field magnetoresistance up to 400 K in double perovskite Sr{sub 2}FeMoO{sub 6} synthesized by a citrate route

A wet-chemistry technique, namely the citrate route, has been used to prepare high-quality polycrystalline samples of double perovskite Sr{sub 2}FeMoO{sub 6}. We report on the evolution of magnetic and magnetoresistive properties of the synthesized samples as a function of three parameters (i) the pH of the starting solution, (ii) the decomposition temperature of the citrate precursors and (iii) the sintering conditions. The low-field magnetoresistance (LFMR) value of our best samples is as high as 5% at room temperature for an applied magnetic field of 1 kOe. Additionally, the distinguishing feature of these samples is the persistence of LFMR, with a reasonably large value, up to 400 K which is a crucial parameter for any practical application. Our study indicates that the enhancement of LFMR observed is due to a good compromise between the grain size distribution and their magnetic polarization. -- Graphical abstract: The microstructure (left panel) and corresponding low-field magnetoresistance of one of the Sr{sub 2}FeMoO{sub 6} samples synthesized in the course of this work. Highlights: • Samples of Sr{sub 2}FeMoO{sub 6} are prepared using a citrate route under varying conditions. • Magnetoresistive properties are improved and optimized. • Low-field magnetoresitence values as large as 5% at 300 K/1 kOe are reported. • Persistence of low-field magnetoresistance up to 400 K.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Magnéli phases Ti{sub 4}O{sub 7} and Ti{sub 8}O{sub 15} and their carbon nanocomposites via the thermal decomposition-precursor route

A new synthetic approach for producing nano-powders of the Magnéli phases Ti{sub 4}O{sub 7}, Ti{sub 8}O{sub 15} and their carbon nanocomposites by thermal decomposition-precursor route is proposed. The formation mechanism of the single-phase carbon nanocomposites (Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C) from metal–organic precursors is studied using FT-IR, elemental analysis, TG, STA-MS and others. The synthesis parameters and conditions were optimized to prepare the target oxides with the desired microstructure and physical properties. The electrical and transport properties of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. These nano-materials are n-type semiconductors with relatively low thermal conductivity in contrast to the bulk species. The nanostructured carbon nanocomposites of Magnéli phases achieve a low thermal conductivity close to 1 W/m K at RT. The maximum ZT{sub 570} {sub °C} values are 0.04 for Ti{sub 4}O{sub 7}/C powder nanocomposite and 0.01 for Ti{sub 8}O{sub 15}/C bulk nanocomposite. - Graphical abstract: From the precursor to the produced titanium oxide pellet and its microstructure (SEM, TEM micrographs) as well as results of phase and thermoelectric analyses. - Highlights: • Magnéli phases Ti{sub 4}O{sub 7}/Ti{sub 8}O{sub 15} via thermal decomposition-precursor route is proposed. • The formation mechanism of the nanocomposites Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. • Microstructure of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are examined. • The electrical and transport properties of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. • The maximum figure of mertit ZT{sub 570} {sub °C} of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are 0.01 and 0.04.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Synthesis and characterization of nano-structured TiB{sub 2} processed by milling assisted SHS route

TiB{sub 2} was synthesized via milling assisted self-propagating high-temperature synthesis (SHS) route using TiO{sub 2}, H{sub 3}BO{sub 3} and Mg powders as starting materials. The milling products were compacted and subjected to a hot filament on their top to initiate SHS. Effects of the milling time and addition of NaCl as a process diluent on the phase composition and morphology of the products were investigated. X-ray diffraction analysis indicated the formation of nano-crystalline TiB{sub 2} with mean crystallite size of 31 nm after acid leaching process at room temperature. Addition of 2 mol of NaCl in the same sample decreases the mean crystallite size to 27 nm. SEM and TEM micrographs showed that the mean particle size of TiB{sub 2} decreased from 200 nm in the un-milled sample to about 50 nm in the 5-hour mechanically activated (MA) sample. - Graphical abstract: High purity nano particles of TiB{sub 2} were achieved after complete elimination of undesirable phases by acid leaching of MA-SHS product at ambient temperature. Highlights: Black-Right-Pointing-Pointer Nano-structured pure TiB{sub 2} was synthesized by MA-SHS route. Black-Right-Pointing-Pointer The mean particle size of TiB{sub 2} phase was 50 nm. Black-Right-Pointing-Pointer Impurities were eliminated by leaching of the products at ambient temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Fe-doped nanostructured titanates synthesized in a single step route

In this research nanostructured titanates, containing iron in the structure, were obtained through a single-step alkaline hydrothermal route aiming at reduction of band-gap energy. In the process, a Fe–Ti rich Brazilian mineral sand was mixed with 10 M of NaOH and then submitted to isothermal treatments at temperatures ranging from 110 to 190 °C in an autoclave. The as-obtained products were water-washed and then characterized by transmission electron and scanning transmission electron microscopies, X-ray photoelectron, Mössbauer and diffuse reflectance spectroscopies. Transmission electron microscopy analyses showed a morphological dependence of the product as a function of the temperature, i.e., titanate nanosheets were predominantly formed at lower temperatures (110 °C–150 °C), while nanoribbons, with some nanosheets and nanoparticles, were the main products at higher temperatures (> 150 °C). Using energy dispersive X-ray it was determined that iron was incorporated into nanosheets. On the other hand, the as-obtained nanoribbons were Fe-free, while iron was principally associated with nanoparticles attached to the nanoribbons. By means of X-ray photoelectron and Mössbauer spectroscopies, it was elucidated that iron adopted Fe{sup 3} {sup +} form in the as-prepared nanosheets, occupying octahedral sites inside the titanate lepidocrocite-like structure. Diffuse reflectance spectroscopy showed a change of absorption pattern from nanosheets to nanoribbon/nanoparticle assembly: nanosheets exhibited high absorption from ultraviolet up to the visible light range, while the nanoribbon/nanoparticle assembly demonstrated a drop in absorption in the visible light range. These results suggest that Fe{sup 3} {sup +} incorporation inside the titanate structure is responsible for enhancing the visible light absorption, making these nanosheets potentially suitable for applications in photoinduced processes. - Highlights: • Mineral sand has been used as the precursor for the synthesis of nanotitanates. • Fe-doped nanotitanates have been prepared in a single step wet chemistry route. • The morphology of the nanometric titanates is a function of the temperature. • Mössbauer spectroscopy reveals Fe{sup 3} {sup +} in octahedral sites inside nanosheets. • The Fe incorporation in nanosheets improved the visible light absorption.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Characterization of Cu–Ni nanostructured alloys obtained by a chemical route. Influence of the complexing agent content in the starting solution

The influence of the amount of complexing agent added to the starting solution on the physicochemical properties of Cu–Ni nanostructured alloys obtained through a chemical route, was studied. For this purpose, three Cu–Ni nanoalloy samples were synthesized by a previously developed procedure, starting from solutions with citric acid to metal molar ratios (C/Me) of 0.73, 1.00 and 1.50. The synthesis technique consisted in preparing a precursor via the citrate-gel method, and carrying out subsequent thermal treatments in controlled atmospheres. Sample characterization was performed by scanning electron microscopy, X-ray microanalysis, X-ray diffraction, transmission electron microscopy, X-ray nanoanalysis and electron diffraction. In the three cases, copper and nickel formed a solid solution with a Cu/Ni atomic ratio close to 50/50, and free of impurities inside the crystal structure. The citric acid content of the starting solution proved to have an important influence on the morphology, size distribution, porosity, and crystallinity of the Cu–Ni alloy microparticles obtained, but a lesser influence on their chemical composition. The molar ratio C/Me = 1.00 resulted in the alloy with the Cu/Ni atomic ratio closest to 50/50. - Highlights: • We synthesize Cu–Ni nanoalloys by a chemical route based on the citrate-gel method. • We study the influence of the complexing agent content of the starting solution. • We characterize the samples by electron microscopy and X-ray techniques. • Citric acid influences the shape, size, porosity and crystallinity of the alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Microstructure and mechanical properties of NiCoCrAlYTa alloy processed by press and sintering route

Nickel-based superalloys such as NiCoCrAlY are widely used in high-temperature applications, such as gas turbine components in the energy and aerospace industries, due to their strength, high elastic modulus, and high-temperature oxidation resistance. However, the processing of these alloys is complex and costly, and the alloys are currently used as a bond coat in thermal barrier coatings. In this work, the effect of cold press and sintering processing parameters on the microstructure and mechanical properties of NiCoCrAlY alloy were studied using the powder metallurgy route as a new way to obtain NiCoCrAlYTa samples from a gas atomized prealloyed powder feedstock. High mechanical strength and adequate densification up to 98% were achieved. The most suitable compaction pressure and sintering temperature were determined for NiCoCrAlYTa alloy through microstructure characterization. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive spectroscopy microanalysis (EDS) were performed to confirm the expected γ-Ni matrix and β-NiAl phase distribution. Additionally, the results demonstrated the unexpected presence of carbides and Ni–Y-rich zones in the microstructure due to the powder metallurgy processing parameters used. Thus, microhardness, nanoindentation and uniaxial compression tests were conducted to correlate the microstructure of the alloy samples with their mechanical properties under the different studied conditions. The results show that the compaction pressure did not significantly affect the mechanical properties of the alloy samples. In this work, the compaction pressures of 400, 700 and 1000 MPa were used. The sintering temperature of 1200 °C for NiCoCrAlYTa alloy was preferred; above this temperature, the improvement in mechanical properties is not significant due to grain coarsening, whereas a lower temperature produces a decrease in mechanical properties due to high porosity and poor solid-state diffusion. - Graphical abstract: Display Omitted - Highlights: • We made NiCoCrAlYTa alloy by a conventional powder metallurgy route. • High densification and adequate strength were observed. • The presence of unexpected carbides found along γ/γ and γ/β grain boundaries was detected. • The effect of cold press and sintering processing parameters on the microstructure and mechanical properties were studied.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Bio-template route for facile fabrication of Cd(OH){sub 2}@yeast hybrid microspheres and their subsequent conversion to mesoporous CdO hollow microspheres

Cadmium oxide (CdO) microspheres with a porous hollow microstructure were prepared by a facile yeast mediated bio-template route. The yeast provides a solid scaffold for the deposition of cadmium hydroxide (Cd(OH){sub 2}) from cadmium acetate and sodium hydroxide solutions to form the hybrid Cd(OH){sub 2}@yeast precursor. Thermal conversions of this at above 500 {sup o}C in air have produced hollow CdO microspheres. The products were characterized by scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), thermal gravimetric and differential thermal analysis (TGA-DTA), and Brunauer-Emmett-Teller (BET) surface analysis respectively. The obtained CdO microspheres have uniform size (length = 2.6 {+-} 0.4 {mu}m; width = 2.0 {+-} 0.2 {mu}m) and a well defined, continuous, mesoporous hollow microstructure. The shell is about 250-280 nm in thickness. The mechanism of formation of Cd(OH){sub 2}@yeast precursor and its conversion to CdO hollow microspheres is discussed. In comparison with traditional template-directed method, the present strategy represents a general, economical and environmentally benign route for the formation of metal oxide hollow microspheres. These materials have potential applications in different fields such as encapsulation, drug delivery, efficient catalysis, battery materials and photonic crystals. The method presented can be extended to the synthesis of other inorganic hollow microstructures of different sizes and shapes by pre-selecting suitable bio-templates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

A novel route for the synthesis of nanotubes and fullerene-like nanostructures of molybdenum disulfide

Graphical abstract: Nanotubes and fullerene-like nanostructures of MoS{sub 2} were synthesized via a microwave-assisted route in solution phase. Highlights: Black-Right-Pointing-Pointer Microwave-assisted route for synthesis of nanotube and fullerene-like nanostructures of MoS{sub 2}. Black-Right-Pointing-Pointer Morphological analysis of the synthesized products. Black-Right-Pointing-Pointer Solvent plays important role in the modification of morphology of MoS{sub 2}. -- Abstract: The paper described the synthesis of nanotubes and fullerene-like nanostructures of MoS{sub 2} through a technically simple, rapid, and energy-efficient microwave-assisted synthesis technique, which involved the use of elemental sulfur dissolved in a mixture of monoethanolamine and hydrazine hydrate as the sulfide source. The microwave induced reaction between the molybdate with sulfide ions, in the presence of hydrazine hydrate in the reaction medium, resulted in the formation of gray colored powders of amorphous MoS{sub 2}. The as-obtained powders were calcined at 600 Degree-Sign C for 2 h and characterized by different techniques. HRTEM analysis of the calcined samples indicated the formation of fullerene-like MoS{sub 2} structures when the starting solution mixture was irradiated with microwave for a period of 200 s, while on 600 s of irradiation of the same revealed the formation of folded sheets like MoS{sub 2} nanotubes. BET surface areas of the calcined samples have been measured and a plausible reaction mechanism for the formation of nanotubes and fullerene-like nanostructures of MoS{sub 2} has been proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Synthesis of La{sup 3+} doped nanocrystalline ceria powder by urea-formaldehyde gel combustion route

Highlights: Black-Right-Pointing-Pointer Nano LC synthesized by gel combustion, using urea-formaldehyde fuel for first time. Black-Right-Pointing-Pointer Largely single crystals were produced in average range of 20-30 nm. Black-Right-Pointing-Pointer La{sup 3+} doping increases cell dimension linearly. Black-Right-Pointing-Pointer La{sup 3+} doping introduces ionic point defects but does not change electronic band gap. Black-Right-Pointing-Pointer Presence of Ce{sup 3+} indicates that this synthesis route produces reactive powders. -- Abstract: Nanocrystalline ceria powders doped with various concentrations of lanthanum oxide have been prepared following gel combustion route using for the first time urea-formaldehyde as fuel. The synthesized products were characterized by XRD, FESEM, TEM, PL and UV-vis spectroscopy. Peak positions of XRD were refined and the lattice parameters were obtained by applying Cohen's method. Unit cell parameter increases with concentration of La{sup 3+} ion and the variation is consistently linear. XRD calculations showed the dependence of crystallite size on dopant concentrations at lower level. TEM observation revealed unagglomerated particles to be single crystals in the average range of 20-30 nm. Band gap of the La{sup 3+} doped ceria materials does not change with doping. Spectroscopic experiments proved the existence of Ce{sup 3+} in the formed powder.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Generalized chemical route to develop fatty acid capped highly dispersed semiconducting metal sulphide nanocrystals

Highlights: ► Chemical route for the synthesis of OA-capped CdS, ZnS and PbS at low temperature. ► Synthesized nanocrystals via thermolysis of their metal–oleate complexes. ► Size quantized nanocrystals were highly dispersed and stable at room temperature. -- Abstract: This work deals with the synthesis of highly dispersed semiconducting nanocrystals (NCs) of cadmium sulphide (CdS), zinc sulphide (ZnS) and lead sulphide (PbS) through a simple and generalized process using oleic acid (OA) as surfactant. To synthesize these NCs, metal–oleate (M–O) complexes were obtained from the reaction at 140 °C between metal acetates and OA in hexanes media. Subsequently, M–O complexes were sulphurized using thioacetamide at the same temperature. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) characterizations show that the synthesized products are of nanoscale-size with highly crystalline cubic phase. The optical absorption of OA-capped metal sulphide NCs confirms that their size quantization induced a large shift towards visible region. Photoluminescence (PL) spectrum of CdS NCs shows a broad band-edge emission with shallow and deep-trap emissions, while PL spectrum of ZnS NCs reveals a broad emission due to defects states on the surface. The thermogravimetric analysis (TGA) and Fourier transform infrared (FTIR) spectroscopy indicate that fatty acid monolayers were bound strongly on the nanocrystal surface as a carboxylate and the two oxygen atoms of the carboxylate were coordinated symmetrically to the surface of the NCs. The strong binding between the fatty acid and the NCs surface enhances the stability of NCs colloids. In general, this generalized route has a great potential in developing nanoscale metal sulphides for opto-electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers by hydrothermal route: Luminescence properties

Highlights: ► Uniform Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were synthesized via a hydrothermal route and thermal decomposition. ► The length and diameter of Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were about 3–9 μm and 300 nm, respectively. ► Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers presented a broad R band at 696 nm when excited at 400 nm. ► It is shown that the 0.07 mol% of doping concentration of Cr{sup 3+} ions in α-Al{sub 2}O{sub 3}:Cr{sup 3+} is optimum. ► Critical distance between Cr{sup 3+} ions for energy transfer was determined to be 38 Å. -- Abstract: Uniform Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were synthesized by using a hydrothermal route and thermal decomposition of a precursor of Cr{sup 3+} doped ammonium aluminum hydroxide carbonate (denoted as AAHC), and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence (PL) spectra and decay curves. XRD indicated that Cr{sup 3+} doped samples calcined at 1473 K were the most of α-Al{sub 2}O{sub 3} phase. SEM showed that the length and diameter of these Cr{sup 3+} doped alumina microfibers were about 3–9 μm and 300 nm, respectively. PL spectra showed that the Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers presented a broad R band at 696 nm. It is shown that the 0.07 mol% of doping concentration of Cr{sup 3+} ions in α-Al{sub 2}O{sub 3}:Cr{sup 3+} was optimum. According to Dexter's theory, the critical distance between Cr{sup 3+} ions for energy transfer was determined to be 38 Å. It is found that the curve followed the single-exponential decay.

36 MATERIALS SCIENCE↗