Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Structural, thermal, optical properties and simulation of white light of titanium-tungstate-tellurite glasses doped with dysprosium

Graphical abstract: CIE coordinate diagram of different concentrations of the Dy{sup 3+}-doped TTWD glasses with coordinates in the white light region. - Highlights: • Radiative lifetime of {sup 4}F{sub 9/2} level of Dy{sup 3+} ions is longer in the tellurite glass. • Quantum efficiency is found to be high. • These glasses are suitable materials for generating white light. - Abstract: Structural, thermal, optical properties and simulation of white light of Dy{sup 3+}-doped tellurite glasses of composition TTWD: (75 − x)TeO{sub 2} − 10TiO{sub 2} − 15WO{sub 3} − xDy{sub 2}O{sub 3} (x = 0, 0.1, 0.5, 1.0 and 2.0 mol%) were investigated. Raman spectra revealed that the glass contains TeO{sub 4}, TeO{sub 3}, WO{sub 4} and WO{sub 6} units. Differential scanning calorimetry (DSC) measurements were carried out to measure the glass transition temperature of all the glasses. From the optical absorption spectra, luminescence spectra and using the Judd–Ofelt (JO) analysis, we estimated the radiative transition probabilities, emission cross-sections, branching ratios and radiative lifetimes. The decay curves at lower concentrations are exponential while they show a non-exponential behavior at higher concentrations (≥0.5 mol%) due to energy transfer processes. The effective lifetime for the {sup 4}F{sub 9/2} level decreases with increase in Dy{sub 2}O{sub 3} concentration for the glasses under investigation. The non-exponential decay curves could fit well to the Inokuti–Hirayama (IH) model with S = 6, indicating that the nature of interaction responsible for energy transfer is of dipole–dipole type. Simulation of white light is examined with varying concentration and the results indicate that these glasses are suitable for white light emitting diode applications.

36 MATERIALS SCIENCE↗

Crystal structure, Raman spectroscopy, far-infrared, and microwave dielectric properties of (1-x)La(MgSn){sub 0.5}O{sub 3}-xNd(MgSn){sub 0.5}O{sub 3} system

The complex perovskite system (1-x)La(MgSn){sub 0.5}O{sub 3}-xNd(MgSn){sub 0.5}O{sub 3} with the composition (x=0-1) was prepared by the solid state reaction method. Structural and spectroscopic studies were carried out to understand the variation of dielectric properties with x. Rietveld refinement was carried out with the initial model obtained by using the structure prediction and diagnostic software. The symmetry of the compositions was determined to be monoclinic with space group P2{sub 1}/n, which corresponds to the a{sup -}a{sup -}c{sup +} tilting system, and the long-range order parameter was found to decrease with an increase in neodymium concentration. Raman spectra were analyzed by fitting the A{sub 1g}-like mode to a Lorentzian peak shape. Intrinsic dielectric parameters were estimated by fitting infrared reflectance spectra with the four-parameter semiquantum model. Transverse optic phonon mode strengths and average phonon damping were calculated. The origin of increase in the intrinsic loss with the composition variation is discussed. Microwave measurements were carried out in the frequency range of 9-11 GHz. The dielectric constant decreases and the temperature coefficient of resonant frequency becomes less negative with the increase in neodymium concentration.

36 MATERIALS SCIENCE↗

Application of Raman Spectroscopy for Nondestructive Evaluation of Composite Materials

This paper will present an overview of efforts to investigate the application of Raman spectroscopy for the characterization of Kevlar materials. Raman spectroscopy is a laser technique that is sensitive to molecular interactions in materials such as Kevlar, graphite and carbon used in composite materials. The overall goal of this research reported here is to evaluate Raman spectroscopy as a potential nondestructive evaluation (NDE) tool for the detection of stress rupture in Kevlar composite over-wrapped pressure vessels (COPVs). Characterization of the Raman spectra of Kevlar yarn and strands will be presented and compared with analytical models provided in the literature. Results of testing to investigate the effects of creep and high-temperature aging on the Raman spectra will be presented.

Washer, Glenn A.↗

Dioxygen Activation Kinetics over Distinct Cu Site Types in Cu-Chabazite Zeolites

Cu-exchanged zeolites activate dioxygen to form active sites for partial methane oxidation (PMO), nitrogen oxide decomposition, and carbon monoxide oxidation. Apparent rates of O 2 activation depend both on the intrinsic kinetics of distinct Cu site types and the distributions of such sites within a given zeolite, which depend on the density and arrangement of the framework Al atoms. In this work, we use hydrothermal synthesis methods to control the arrangement of framework Al sites in chabazite (CHA) zeolites and, in turn, the distinct Cu site types formed. Time-resolved in situ Raman spectroscopy reveals the kinetics of O 2 adsorption and activation within these well-defined Cu-CHA materials and the concomitant structural evolution of copper–oxygen (Cu x O y ) complexes, which are interpreted alongside Cu(I) oxidation kinetics extracted from in situ X-ray absorption spectroscopy (XAS). Raman spectra of several plausible Cu x O y species simulated using density functional theory suggest that experimental spectra (λ ex = 532 nm) capture the formation of mono(μ-oxo)dicopper species (ZCuOCuZ). Transient experiments show that the timescales required to form Cu x O y structures that no longer change in Raman spectra correspond to the durations of oxidative treatments that maximize CH 3 OH yields in stoichiometric PMO cycles (approximately 2 h). Yet, these periods extend well beyond the timescales for the complete conversion of the initial Cu(I) intermediates to their Cu(II) states (<0.3 h, reflected in X-ray absorption near edge spectroscopy spectra), which demonstrates that Cu x O y complexes continue to evolve structurally following rapid Cu(I) oxidation. The dependence of ZCuOCuZ formation rates on O 2 pressure, H 2 O pressure, and temperature is consistent with a mechanism in which ZCuOH reduces to form ZCu + sites that bind molecular oxygen and form ZCu-O 2 intermediates. Subsequent reaction with proximate ZCu + forms bridging peroxo dicopper complexes that cleave O–O bonds to form ZCuOCuZ in steps facilitated by water. These data and interpretations provide evidence for the chemical processes that link rapid and kinetically irrelevant Cu oxidation steps (frequently probed by XAS and UV–vis spectroscopy) to the relatively slow genesis of reactive Cu complexes that form CH 3 OH during PMO. In doing so, we reveal previously unrecognized complexities in the processes by which Cu ions in zeolites activate O 2 to form active Cu x O y complexes, which underscore the insight afforded by judicious combinations of experimental and theoretical techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical, structural and morphological properties of zirconia nanoparticles prepared by laser ablation in liquids

Absorption, fluorescence and Raman spectra, the structural composition and morphology of zirconia nanoparticles synthesised via the laser ablation of a metal in water and aqueous solutions of the sodium dodecyl sulphate (SDS) surfactant have been studied using absorption spectroscopy, Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The results demonstrate that, exposing zirconium to intense nanosecond laser pulses at a high repetition rate in these liquids, one can obtain stable cubic, tetragonal and monoclinic crystalline phases of nanozirconia with a particle size in the range 40 – 100 nm and a Zr – SDS organic – inorganic composite. The absorption and fluorescence of the synthesised zirconia strongly depend on the SDS concentration in the starting solution. The gas – vapour bubbles forming during ablation are shown to serve as templates for the formation of hollow nanoand microstructures. (nanostructures)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vibrational spectra and nonlinear optical coefficients of rhombohedral CsGe X 3 halide compounds with X = I , Br, Cl

The zone-center phonons are calculated here for rhombohedral CsGeX 3 compounds with X=I, Br, Cl using density functional perturbation theory in a plane-wave pseudopotential method. The infrared absorption and reflection spectra are simulated and show that the absorption has a strong contribution from the LO as well asTO modes. Both the lowest and highest IR active modes have strong oscillator strengths for each symmetry (A 1 and E) and correspond to motions of either the Cs or Ge ions relative to the halogen ions. respectively. The intermediate modes have low oscillator strength because their mode pattern shows less clearly a dipole pattern.The polarization dependent Raman spectra for various back scattering configurations are simulated. Only the highest modes of each symmetry have a strong Raman intensity. The findings for the Raman spectra are found to be in good agreement with the available experimental data for polycrystalline films when averaging over directions. The Born effective charges and high and low frequency dielectric tensors as well as the second-order nonlinear optical coefficients are calculated. The ratio of the static to the high-frequency dielectric constants are extremely high and analyzed in terms of the contribution of each mode to the Lyddane-Sachs-Teller relation. The nonlinear optical coefficients decrease strongly from I to Br to Cl in reverse order of the band gaps and are foundto be consistent with available experimental results

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nitrogen doping of chemical vapor deposition grown graphene on 4H-SiC (0001)

We present optical, electrical, and structural properties of nitrogen-doped graphene grown on the Si face of 4H-SiC (0001) by chemical vapor deposition method using propane as the carbon precursor and N{sub 2} as the nitrogen source. The incorporation of nitrogen in the carbon lattice was confirmed by X-ray photoelectron spectroscopy. Angle-resolved photoemission spectroscopy shows carrier behavior characteristic for massless Dirac fermions and confirms the presence of a graphene monolayer in the investigated nitrogen-doped samples. The structural and electronic properties of the material were investigated by Raman spectroscopy. A systematical analysis of the graphene Raman spectra, including D, G, and 2D bands, was performed. In the case of nitrogen-doped samples, an electron concentration on the order of 5–10 × 10{sup 12} cm{sup −2} was estimated based upon Raman and Hall effect measurements and no clear dependence of the carrier concentration on nitrogen concentration used during growth was observed. This high electron concentration can be interpreted as both due to the presence of nitrogen in graphitic-like positions of the graphene lattice as well as to the interaction with the substrate. A greater intensity of the Raman D band and increased inhomogeneity, as well as decreased electron mobility, observed for nitrogen-doped samples, indicate the formation of defects and a modification of the growth process induced by nitrogen doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reimagining pH Measurement: Utilizing Raman Spectroscopy for Enhanced Accuracy in Phosphoric Acid Systems

Measurement of pH is an integral component of chemical studies and process control; however traditional pH probes are difficult to utilize in harsh or complex chemical systems. Optical spectroscopy-based on-line monitoring offers a powerful and novel route for characterizing system parameters, such as pH, and is well adapted to deployment in harsh environments or chemically complex systems. Specifically, Raman spectroscopy combined with chemometric analysis can provide an improved method of on-line pH measurement. Therefore, multivariate curve resolution analysis of Raman spectra can be utilized to determine speciation as a function of pH and subsequent chemometric modeling can be used to correlate spectral response to pH. This was demonstrated with phosphoric acid, a chemical system known to challenge traditional pH probes. Raman spectra exhibit clear changes with pH due to changing speciation, and chemometric modeling can be successfully utilized to correlate those fingerprints to pH. Using this approach, true pH of the phosphoric acid system can be measured with greater accuracy than with traditional pH probes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent Effects on the Coexistence of Localized and Delocalized 4,4′-Dinitrotolane Radical Anion by Resonance Raman Spectroscopy

The resonance Raman spectrum of the simple alkyne bridge in 4,4{prime}-dinitrotolane radical anion shows two distinct bands, providing proof of the solvent-dependent coexistence of charge-localized and -delocalized species. The Raman spectra of normal modes primarily involving the charge-bearing ?PhNO{sub 2} units also support the coexistence of two solvent-dependent electronic species. The temperature dependence of the spectra of the bridging unit shows an inverse relationship between the solvent reorganization energy ({lambda}{sub s}) and the temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AFM CHARACTERIZATION OF LASER INDUCED DAMAGE ON CDZNTE CRYSTAL SURFACES

Semi-conducting CdZnTe (or CZT) crystals can be used in a variety of detector-type applications. CZT shows great promise for use as a gamma radiation spectrometer. However, its performance is adversely affected by point defects, structural and compositional heterogeneities within the crystals, such as twinning, pipes, grain boundaries (polycrystallinity), secondary phases and in some cases, damage caused by external forces. One example is damage that occurs during characterization of the surface by a laser during Raman spectroscopy. Even minimal laser power can cause Te enriched areas on the surface to appear. The Raman spectra resulting from measurements at moderate intensity laser power show large increases in peak intensity that is attributed to Te. Atomic Force Microscopy (AFM) was used to characterize the extent of damage to the CZT crystal surface following exposure to the Raman laser. AFM data reveal localized surface damage in the areas exposed to the Raman laser beam. The degree of surface damage to the crystal is dependent on the laser power, with the most observable damage occurring at high laser power. Moreover, intensity increases in the Te peaks of the Raman spectra are observed even at low laser power with little to no visible damage observed by AFM. AFM results also suggest that exposure to the same amount of laser power yields different amounts of surface damage depending on whether the exposed surface is the Te terminating face or the Cd terminating face of CZT.

36 MATERIALS SCIENCE↗

[N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4}: Ferroelectric properties and characterization of phase transitions by Raman spectroscopy

The X-ray powder diffraction pattern shows that at room temperature, [N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4} is crystallized in the orthorhombic system with Pnma space group. The phase transitions at T{sub 1} = 255 K, T{sub 2} = 282 K, T{sub 3} = 302 K, T{sub 4} = 320 K, and T{sub 5} = 346 K have been confirmed by the differential scanning calorimetry. The electrical technique was measured in the 10{sup −1}–10{sup 7 }Hz frequency range and 233–363 K temperature intervals. The temperature dependence of the dielectric constant at different temperatures proved that this compound is ferroelectric below 282 K. Besides, [N(CH{sub 3}){sub 3 }H]{sub 2}ZnCl{sub 4} shows classical ferroelectric behaviour near curie temperature. In order to characterize the phase transitions, Raman spectra have been recorded in the temperature range of 233–383 K and the frequency range related to the internal and external vibrations of the cations and anions (90–4000 cm{sup −1}). The temperature dependence of the Raman line shifts ν and the half-width Δν detects all phase transitions and confirms their nature, especially at 282 K that corresponds to the ferroelectric-paraelectric phase transition.

36 MATERIALS SCIENCE↗

Measuring Local Electric Fields and Local Charge Densities at Electrode Surfaces Using Graphene-Enhanced Raman Spectroscopy (GERS)-Based Stark-Shifts

Here, we report spectroscopic measurements of the local electric fields and local charge densities at electrode surfaces using graphene-enhanced Raman spectroscopy (GERS) based on the Stark-shifts of surface-bound molecules and the G band frequency shift in graphene. Here, monolayer graphene is used as the working electrode in a three-terminal potentiostat while Raman spectra are collected in situ under applied electrochemical potentials using a water immersion lens. First, a thin layer (1 Å) of copper(II) phthalocyanine (CuPc) molecules are deposited on monolayer graphene by thermal evaporation. GERS spectra are then taken in an aqueous solution as a function of the applied electrochemical potential. The shifts in vibrational frequencies of the graphene G band and CuPc are obtained simultaneously and correlated. The upshifts in the G band Raman mode are used to determine the free carrier density in the graphene sheet under these applied potentials. Of the three dominant peaks in the Raman spectra of CuPc (i.e., 1531, 1450, and 1340 cm –1 ), only the 1531 cm –1 peak exhibits Stark-shifts and can, thus, be used to report the local electric field strength at the electrode surface under electrochemical working conditions. Between applied electrochemical potentials from -0.8 V to 0.8 V vs NHE, the free carrier density in the graphene electrode spans a range from -4 × 10 12 cm –2 to 2 × 10 12 cm –2 . Corresponding Stark-shifts in the CuPc peak around 1531 cm –1 are observed up to 1.0 cm –1 over a range of electric field strengths between -3.78 × 10 6 and 1.85 × 10 6 V/cm. Slightly larger Stark-shifts are observed in a 1 M KCl solution, compared to those observed in DI water, as expected based on the higher ion concentration of the electrolyte. Based on our data, we determine the Stark shift tuning rate to be 0.178 cm –1 / (10 6 V/cm), which is relatively small due to the planar nature of the CuPc molecule, which largely lies perpendicular to the electric field at this electrode surface. Computational simulations using density functional theory (DFT) predict similar Stark shifts and provide a detailed atomistic picture of the electric field-induced perturbations to the surface-bound CuPc molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of proton irradiation temperature on persistent photoconductivity in zinc oxide metal-semiconductor-metal ultraviolet photodetectors

The electrical and structural characteristics of 50-nm-thick zinc oxide (ZnO) metal-semiconductor-metal ultraviolet (UV) photodetectors subjected to proton irradiation at different temperatures are reported and compared. The devices were irradiated with 200 keV protons to a fluence of 1016 cm−2. Examination of the x-ray diffraction (XRD) rocking curves indicates a preferred (100) orientation prior to irradiation, with decrease in crystal quality afterward. Additionally, peak shifts in XRD and Raman spectra of the control sample relative to well-known theoretical positions are indicative of tensile strain in the as-deposited ZnO films. Shifts toward theoretical unstrained positions are observed in the irradiated films, which indicates partial relaxation. Raman spectra also indicate increase in oxygen vacancies (VO) and zinc interstitial defects (Zni) compared to the control sample. Additionally, transient photocurrent measurements performed on each sample at different temperatures showed up to 2× increase in photocurrent decay time constants for irradiated samples vs the control. This persistent photoconductive behavior is linked to the activation of electron and hole traps near the surface, and to the desorption and reabsorption of O2 molecules on the ZnO surface under the influence of UV light. Using an Arrhenius model, trap activation energies were extracted and, by comparing with known energies from the literature, the dominant defects contributing to persistent photoconductivity for each irradiation condition were identified. The persistence of differences in photocurrent transients between different samples months after irradiation indicates that the defects introduced by the suppression of thermally activated dynamic annealing processes have a long-term deleterious effect on device performance.

Heuser, Thomas A. (ORCID:0000000225642400)↗

Influence of defects on the structural and magnetic properties of multifunctional La2NiMnO6 thin films

Thin films of the double perovskite La2NiMnO6 (LNMO) have been grown on various lattice-matched substrates (SrTiO3, LaAlO3, NdGaO3 and MgO) by pulsed laser deposition under varying oxygen background pressure (25 - 800 mTorr). The out-of-plane lattice constant of the LNMO film initially decreases with increasing pressure, likely caused by a reduction in the defect concentration and improved structural ordering, before leveling off at higher pressures. Scanning transmission electron microscopy results show that the films are epitaxial, and the interface is sharp and coherent. While very few defects are observed by STEM in a film grown at high oxygen pressure (800 mTorr), a film grown at a lower pressure (100 mTorr) shows the formation of defects that extend throughout the thickness except for a very thin layer near the interface. The Raman spectra of the films are dominated by two broad peaks at around 540 cm-1 and 685 cm-1, which are assigned to the antisymmetric stretching (AS) and symmetric stretching (S) modes of MnO6 and NiO6 octahedra, respectively. The Raman peaks of the LNMO thin films grown in 800 mTorr background O2 are blue shifted in comparison to those of LNMO bulk, and the shift increases with decreasing film thickness, indicating the increased influence of strain. The critical thickness for strain relaxation as determined from the Raman spectra is between 40 - 80 nm. The strain is observed to have a negligible influence on the magnetic properties for films grown at high oxygen pressures. However, films grown at low pressures exhibit degraded magnetic properties, which can be attributed to a combination of B-site cation disorder and an increase in the concentration of Mn3+ and Ni3+ Jahn-Teller ions caused by oxygen defects. With increasing oxygen pressure during growth, the paramagnetic-ferromagnetic transition temperature (~280 K) gets sharper and the saturation magnetization at low temperatures is enhanced. Based on electron energy loss spectroscopy studies, the Mn and Ni ions in LNMO thin films are determined to be mixed-valent Mn3+/Mn4 +, and a charge transition disproportionation of the type Mn4+ + Ni2+ _ Mn3+ + Ni3+ likely occurs with increasing oxygen deficiency.

36 MATERIALS SCIENCE↗

Liquid cell with plasmon lenses for surface enhanced raman spectroscopy.

High-fidelity surface enhanced Raman spectra (SERS) of Rhodamine 6G and 2-mercaptopyrimidine liquid solutions are measured using a microfluidic delivery system constructed on a flat silver substrate. Microscopic plasmon lenses patterned in the silver film focus surface plasmons into a subwavelength spot which yields the light amplification required for SERS. The system provides an efficiency similar to traditional colloidal substrates, and allows multiple sample loading. We find that the main contribution to the spectra comes from the molecules directly attached to the silver surface, which gives strong evidence for the chemical enhancement of SERS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

One-pot occurrence of two polymorphs of Rb{sub 2}Sc[Si{sub 4}O{sub 10}]F and their structural, spectroscopic and computational characterization

Single-crystal growth experiments in the system RbF–Sc{sub 2}O{sub 3}–SiO{sub 2} resulted in the crystallization of two forms of Rb{sub 2}Sc[Si{sub 4}O{sub 10}]F within the same run. Basic crystallographic data of the two concomitant polymorphs at ambient conditions are as follows: phase I: space group I4/m, a=11.2619(3) Å, c=8.3053(4) Å, V=1053.36(6) Å{sup 3}, Z=4; phase II: space group P2{sub 1}/m, a=11.5085(6) Å, b=8.3805(3) Å, c=11.6750(6) Å, β=111.147(6)°, V=1050.19(9) Å{sup 3}, Z=4. The structures were determined by direct methods and refined to residuals of R(|F|)=0.0231 (phase I) for 516 and 0.0249 (phase II) for 2050 independent observed reflections with I>2σ(I). Phase I showed twinning by merohedry which was accounted for during the refinement process. Both compounds are based on multiple chains of [SiO{sub 4}]-tetrahedra forming closed columns or tubes. The multiplicity of the unbranched fundamental chains is two (for phase I) and four (for phase II), respectively. The periodicity of the multiple chains has a value of four in both modifications which is also reflected in similar translation periods along the chain directions (phase I: t{sub [001]}=8.31 Å; phase II: t{sub [010]}=8.38 Å). Alternatively, both polymorphs can be described as mixed octahedral–tetrahedral frameworks, which can be classified according to their polyhedral microensembles. A topological analysis of both networks is presented. Structural investigations have been supplemented by micro-Raman spectroscopy. The interpretation of the spectroscopic data including the allocation of the bands to certain vibrational species has been aided by DFT-calculations. - Graphical abstract: Mixed tetrahedral–octahedral framework of the tetragonal polymorph of Rb{sub 2}Sc[Si{sub 4}O{sub 10}]F. - Highlights: • We report the crystal structures of two polymorphs of Rb{sub 2}ScSi{sub 4}O{sub 10}F. • Both phases crystallized concomitantly in the same flux-growth experiment. • The mixed tetrahedral–octahedral nets are compared using a topological approach. • Interpretation of the Raman spectra has been aided by DFT-calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗