Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Scaling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Full-scale Demonstration of Multi-process Sensor at a Cycling PC-fired Boiler

The main objective of this research program is to design, manufacture, and demonstrate a miniaturized, multi-process, monitoring system (mMPMS) for boiler condition management and easy system deployment to obtain a higher spatial resolution. This system will facilitate a Condition-Based Maintenance (CBM) philosophy that actively monitors the health of assets to predict and prevent failures and maximize availability and generating capacity at a reduced cost. CBM systems can provide boiler data that the advanced process control (APC) system can utilize for plant performance optimization, which is increasingly relevant as coal power plants shift from predominantly base-load operation to predominantly transient operation involving large load swings. The mMPMS is based on an electrochemical sensor that provides a real-time indication of the risk of damage to key locations in the radiant or convective section of a coal-fired boiler such as metal loss rates, heat flux, metal surface temperature, and deposit thickness. These indications can be utilized to optimize boiler performance as well as improve boiler availability in conjunction with corresponding operating conditions. This monitoring system was developed and tested in the high-temperature regions of coal-fired utility boilers in this project but can be applied to many other industries and applications as well. This project leveraged the existing electrochemical noise-based monitoring system and the new sensor design is small enough to be installed through the webbing of the waterwalls without the need for long shut-downs to bend tubes and to make it feasible to obtain high spatial resolution in the boiler. Data is transferred to the plant distributed control system (DCS) and any other control system. The sensor body that houses the sensor assembly was designed to ensure good conductive contact with boiler tubes to ensure the sensor is held at an identical temperature to the tube surface temperature. The data acquisition and signal conditioning modules were redesigned into a small footprint with optimized cooling of the module. System software was developed specifically for the new signal conditioning module and is compatible with plant PLCs. After the preliminary testing at a pilot-scale facility, the three mMPMS were installed at a full-scale pulverized coal-fired plant, PacifiCorp’s Hunter 3. The systems were demonstrated over 20,000 hours at the plant during regular operation. Also, the sensor data was fed to the plant’s advanced process control system to evaluate the corrosion control by the operation changes and utilized to understand the impacts of load cycling with different ramping up and down speeds. At the end of the project, the systems were converted to the permanent installation at the power plant to be used with the advanced process control system installed at the plant.

Advanced Sensors, Corrosion, Ash Deposition, Optim↗
DOE OSTI2020

Molten Chloride Thermophysical Properties, Chemical Optimization, and Purification

Next-generation concentrating solar power (CSP) technology requires high-temperature heat-transfer fluids and thermal energy storage that can operate in the temperature range of 500°–720°C. This high temperature demands a new chemistry for the heat-transfer fluids that must have high-temperature thermal and chemical stabilities, high energy density, and low corrosion rate on metallic materials used in the heat exchangers, piping, and thermal energy storage tanks. A ternary MgCl 2 -KCl-NaCl chloride-salt system has been proposed to achieve such goals, given its high-temperature thermal stability. The chloride-salt-based systems have been used by the metallurgy industry as the electrolyte to electrolytically extract metallic magnesium. They have also attracted attentions from the nuclear industry for developing the molten salt fast reactors that can operate at close to atmospheric pressure and at higher temperature than traditional light-water reactors. However, the corrosion properties of the ternary salt are not well known. The corrosion mechanism is believed to be correlated to the presence of MgOHCl impurity at the operation temperature. MgOHCl is fundamentally caused by the hygroscopic nature of the MgCl 2 component. Therefore, the first key objective of this project is to understand the nature of the corrosiveness of the ternary chloride-salt system and its prevention by designing new lab-scale purification processes. Because of its importance, a working group called the Chloride Salt Collective across multiple U.S. Department of Energy national laboratories is established to gain experimental agreement on the corrosion behaviors. In addition, water generation during salt dehydration could lead to highly corrosive HCl/water mixture via a hydrolysis process between water and anhydrous MgCl 2 or MgCl 2 hydrates. MgOHCl will eventually be converted to MgO particulates regardless of the chemical path chosen (i.e., by thermal decomposition, chemical purification with an active metal, or electrochemical purification utilizing the reduction power of electron flows). Large MgO particles with high hardness can wear out bearing and bushing and even clog the delicate channels in the primary heat exchanger. Because of this, a second objective is to understand the chemistry behind salt purification and transfer the scientific understanding to a set of engineering know-how for large-scale salt melter design. Because there is limited information on the thermophysical properties and the sensitivity of these properties around the targeted salt composition, a third objective is to measure thermophysical properties relevant to system and component design and support Topic 1 Liquid Pathway development. For example, composition shift due to salt reaction with water can be a potential issue because it can lead to changes of thermophysical properties, such as (1) melting point (or freeze point), which can jeopardize safe operation of the supercritical CO 2 power cycle proposed for next-generation CSP, and (2) heat capacity and density, which can decrease the overall power-generation capability of the plants. The value of the thermal conductivity of the selected salt composition is also a critical criterion for the solar receiver design.

14 SOLAR ENERGY↗
DOE OSTI2023

Scaling Containment on a Large Centrifuge

Containment science concerns the trapping or leakage of radioactive cavity gases from underground nuclear explosions (UNEs). The most physically relevant data for validation of containment science comes from legacy UNE testing or large field-scale chemical explosions. Field-scale tests can inform on the degree of residual stress imparted to host geology and possible formation of an accompanying gas-containing “stress cage”, for example, as a function of chemical explosion yield. However, field testing can be expensive, difficult to conduct, and challenging to instrument with limitations on data coverage (i.e., the number of boreholes; difficult coring through damage zones). Small-scale laboratory tests are typically simpler to conduct and more thoroughly characterize, but may not include the right scale of containment processes for stress-cage or chimney formation. This report presents the theory and fundamentals of large centrifuge physical modeling, including a history of explosive or similar testing relevant to containment science investigations on centrifuges. Subscale models with embedded chemical explosives in the enhanced gravity of a large centrifuge can represent hundreds of meters of depth and large explosions not otherwise attainable in the laboratory as based on scaling of length, energy, and other processes by the g-factor of the centrifuge (i.e., the number of times larger the centrifugal force is than the gravitational force on the Earth’s surface). The centrifuge uniquely joins the simplicity and exhaustiveness of laboratory-scale characterization with the physics of field-scale processes. This report is part of Sandia National Laboratories’ (SNL’s) effort to prepare for physical modeling with approximately one-meter tall geologic models of stress cage and/or chimney formation on its 29-foot [8.84 m] radius centrifuge with a load capacity of 1.6 million 𝑔-pounds [726 𝑔-ton]. The scaling relationships herein will inform model design decisions and performance requirements for in-flight sensors.

42 ENGINEERING↗
DOE OSTI2026

Chloride modification of vacuum-assisted blade-coated perovskite solar cells and mini-modules in ambient environment

Scalable deposition of perovskite thin films under ambient conditions remains a key challenge for the commercialization of perovskite photovoltaics, primarily due to the difficulty of controlling crystallization kinetics and suppressing non-radiative recombination during film formation. In this work, we present an effective strategy to modulate crystallization kinetics and non-radiative recombination in vacuum-quenched blade-coated perovskite films processed in air using chloride-based additives. By systematically comparing PbCl 2 and 3-chloropropylamine hydrochloride (Cl-PACl), we elucidate how different chloride incorporation pathways influence crystallization behavior and optoelectronic properties. In situ transmission and in situ photoluminescence measurements reveal that PbCl 2 acts as a transient additive that slows intermediate/perovskite phase formation while suppressing non-radiative recombination, leading to improved film quality. In contrast, Cl-PACl introduces additional trap states that deteriorate optoelectronic performance. As a result, PbCl 2 -modified perovskite solar cells achieve a champion power conversion efficiency (PCE) of 24.2% and remarkable operational stability, retaining over 90% of their initial performance after 800 hours of continuous illumination. Furthermore, we successfully scaled the process, fabricating a perovskite mini-module that delivered a champion efficiency of 18.0%. This study underscores the critical importance of coupling vacuum-assisted blade coating with transient additive engineering for achieving high-performance, stable, and scalable perovskite photovoltaics processed in ambient air.

14 SOLAR ENERGY↗
DOE OSTI2025

Surface engineering of polymeric membranes with metal oxides for improved fouling resistance and superior oil-water separation

Rapid industrial growth has increased the need for efficient membranes to separate oil-water emulsions. Polyvinylidene fluoride (PVDF) membranes, although widely used due to their chemical inertness and favorable mechanical properties, suffer from fouling due to their intrinsic hydrophobicity. Modifying these membranes after fabrication offers a practical solution as it easily fits into existing large-scale manufacturing processes. Atomic layer deposition (ALD), an atomically-precise vapor phase surface modification technique, can create ultrathin metal oxide layers that greatly improve membrane hydrophilicity without significantly affecting the original pore size. However, PVDF's lack of reactive chemical moieties makes ALD challenging. Here, in this study, we present a simple alkali treatment that greatly enhances ALD nucleation and growth on PVDF membranes. This treatment imparts exceptional oil-water emulsion separation capabilities and antifouling behavior in PVDF membranes after just a few ALD cycles, surpassing the performance of PVDF membranes coated with hundreds of ALD cycles. This dramatic reduction in the number of ALD cycles required could enable cost-effective modification of commercial PVDF membranes at scale using spatial, roll-to-roll ALD. These modified membranes outperform reported modified PVDF membranes, with >99 % permeance recovery and <1 % irreversible loss of permeance and >98 % oil rejection from oil-water emulsions over 100 h continuous operation, making them promising for advanced water purification technologies.

Atomic layer deposition↗
DOE OSTI2022

High Sensitivity of Non–Fullerene Organic Solar Cells Morphology and Performance to a Processing Additive

Although solvent additives are used to optimize device performance in many novel non-fullerene acceptor (NFA) organic solar cells (OSCs), the effect of processing additives on OSC structures and functionalities can be difficult to predict. Here, two polymer-NFA OSCs with highly sensitive device performance and morphology to the most prevalent solvent additive chloronaphthalene (CN) are presented. Devices with 1% CN additive are found to nearly double device efficiencies to 10%. However, additive concentrations even slightly above optimum significantly hinder device performance due to formation of undesirable morphologies. A comprehensive analysis of device nanostructure shows that CN is critical to increasing crystallinity and optimizing phase separation up to the optimal concentration for suppressing charge recombination and maximizing performance. Here, domain purity and crystallinity are highly correlated with photocurrent and fill factors. However, this effect is in competition with uncontrolled crystallization of NFAs that occur at CN concentrations slightly above optimal. This study highlights how slight variations of solvent additives can impart detrimental effects to morphology and device performance of NFA OSCs. Furthermore, successful scale-up processing of NFA-based OSCs will require extreme formulation control, a tuned NFA structure that resists runaway crystallization, or alternative methods such as additive-free fabrication.

14 SOLAR ENERGY↗
DOE OSTI2025

An efficient hybrid downscaling framework to estimate high-resolution river hydrodynamics

Flow depth and velocity are the most important hydrodynamic variables that govern various river functions, including water resources, navigation, sediment transport, and biogeochemical cycling. Existing high-resolution flow depth simulations rely on either computationally expensive river hydrodynamic models (RHMs) or data-driven models with formidable training costs, whereas data-driven modeling of flow velocity has rarely been explored. Here, using the hybrid Low-fidelity, Spatial analysis, and Gaussian process learning (LSG) model, we developed a downscaling approach to construct high-resolution flow depth and velocity from a two-dimensional (2-D) RHM simulation at coarse resolution. The LSG models were trained and tested in an urban watershed in Houston using two different hurricane-driven flood events. The high-resolution (as fine as 30 m resolution) and low-resolution (mostly 1000 m resolution) meshes include 664 724 and 14 536 grid cells, respectively. The results showed that through downscaling, the simulation errors were reduced to less than one-fourth and one-third of the errors of the low-resolution 2-D RHM for flow depth and velocity, respectively. Our analysis further revealed that the dominant uncertainty sources of the downscaled hydrodynamics are different, with flow velocity dominated by the dimensionality reduction error, which we reduced by using a regionalized training procedure. The downscaling approach achieves an 84-fold acceleration in computational time compared to the high-resolution 2-D RHM, making high-fidelity ensemble flood modeling feasible. More importantly, the developed method provides an opportunity to couple large-scale hydrodynamical processes with local physical, chemical, and biological processes in river models.

Tan, Zeli [Pacific Northwest National Laboratory (↗
DOE OSTI2021

Impacts of Varying Concentrations of Cloud Condensation Nuclei on Deep Convective Cloud Updrafts—A Multimodel Assessment

Abstract This study presents results from a model intercomparison project, focusing on the range of responses in deep convective cloud updrafts to varying cloud condensation nuclei (CCN) concentrations among seven state-of-the-art cloud-resolving models. Simulations of scattered convective clouds near Houston, Texas, are conducted, after being initialized with both relatively low and high CCN concentrations. Deep convective updrafts are identified, and trends in the updraft intensity and frequency are assessed. The factors contributing to the vertical velocity tendencies are examined to identify the physical processes associated with the CCN-induced updraft changes. The models show several consistent trends. In general, the changes between the High-CCN and Low-CCN simulations in updraft magnitudes throughout the depth of the troposphere are within 15% for all of the models. All models produce stronger (~+5%–15%) mean updrafts from ~4–7 km above ground level (AGL) in the High-CCN simulations, followed by a waning response up to ~8 km AGL in most of the models. Thermal buoyancy was more sensitive than condensate loading to varying CCN concentrations in most of the models and more impactful in the mean updraft responses. However, there are also differences between the models. The change in the amount of deep convective updrafts varies significantly. Furthermore, approximately half the models demonstrate neutral-to-weaker (~−5% to 0%) updrafts above ~8 km AGL, while the other models show stronger (~+10%) updrafts in the High-CCN simulations. The combination of the CCN-induced impacts on the buoyancy and vertical perturbation pressure gradient terms better explains these middle- and upper-tropospheric updraft trends than the buoyancy terms alone.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Model Intercomparison of the Impacts of Varying Cloud Droplet–Nucleating Aerosols on the Life Cycle and Microphysics of Isolated Deep Convection

The microphysical impacts of aerosol particles on scattered isolated deep convective cells near Houston, Texas, on 19 June 2013, are examined using multiple cloud-resolving model (CRM) simulations initialized with vertical profiles of low and high concentrations of cloud droplet–nucleating aerosols. These simulations formed part of the Model Intercomparison Project (MIP) conducted by the Deep Convective Working Group of the Aerosol, Cloud, Precipitation and Climate (ACPC) initiative. Each CRM generated a field of convective cells representing those observed during the case study with varying degrees of accuracy. The Tracking and Object-Based Analysis of Clouds (tobac) cell-tracking algorithm was applied to each MIP CRM simulation to track relatively long-lived convective cells (20–60 min). Most of the CRMs produced similar aerosol loading impacts on the warm phase of tracked cell properties with reduced autoconversion and accretion growth of rain, increased cloud water, reduced rainfall, and reduced near-surface evaporation of rain. The sign of aerosol impacts on the warm-phase properties of the convective cells was also quite consistent over cell lifetimes with the greatest magnitude of influence in the first half of the life cycle in most CRMs. In contrast, the ice-phase response to aerosol loading was highly variable among CRMs and included increases or decreases in ice amounts at inconsistent stages of the cell life cycle and midlevel versus upper-level changes in ice. This intermodel variability in ice is indicative both of the complex indirect interactions between aerosols and ice-phase processes in deep convection and their associated parameterizations.

Aerosol-cloud interaction↗
DOE OSTI2021

Application of Sequential Design of Experiments (SDoE) to Large Pilot-Scale Solvent-Based CO2 Capture Process at Technology Centre Mongstad (TCM)

The United States Department of Energy’s Carbon Capture Simulation for Industry Impact (CCSI2) program has developed a framework for sequential design of experiments (SDoE) that aims to maximize knowledge gained from budget- and schedule-limited pilot scale testing. SDoE was applied to the planning and execution of campaigns for testing CO2 capture systems at pilot-scale in order to optimally allocate resources available for the testing. In this methodology, a stochastic process model is developed by quantifying the parametric uncertainty in submodels of interest; for a solvent-based CO2 capture system, these may include physical properties and equipment performance submodels (e.g., mass transfer, interfacial area). This uncertainty is propagated through the full process model, over variable operating conditions, for estimating the resulting uncertainty in key model outputs (e.g., percentage of CO2 capture, solvent regeneration energy requirement). In developing a data collection plan, the predicted output uncertainty is incorporated into an algorithm that seeks simultaneously to select process operating conditions for which the predicted uncertainty is relatively high and to ensure that the entire space of operation is well represented. This test plan is then used to guide operation of the pilot plant at varying steady-state conditions, with resulting process data incorporated into the existing model using Bayesian inference to refine parameter distributions. The updated stochastic model, with reduced parametric uncertainty from data collected, is then used to guide additional data collection, thus the sequential nature of the experimental design. The SDoE process was implemented at the pilot test unit (12 MWe in scale) at Norway’s Technology Centre Mongstad (TCM) in a summer 2018 test campaign with aqueous monoethanolamine (MEA). During the test campaign, the varied operating conditions included the flowrates of circulated solvent, flue gas, and reboiler steam and the CO2 concentration in the flue gas. The process data were used to update probability distributions of mass transfer and interfacial area parameters of a stochastic process model developed by the CCSI2 team. Two iterations of the SDoE process were executed, resulting in the uncertainty in model predicted CO2 capture percentage decreasing by an average of 58.0 ± 4.7% over the full input space of interest. This work demonstrates the potential of the SDoE process for model refinement through reduction in process model parametric uncertainty, and ultimately risk in scale-up, in CO2 capture technology performance.

carbon capture↗
DOE OSTI2023

Multifunctional Coatings on Sulfide‐Based Solid Electrolyte Powders with Enhanced Processability, Stability, and Performance for Solid‐State Batteries

Abstract Sulfide‐based solid‐state electrolytes (SSEs) exhibit many tantalizing properties including high ionic conductivity and favorable mechanical properties for next‐generation solid‐state batteries. Widespread adoption of these materials is hindered by their intrinsic instability under ambient conditions, which makes them difficult to process at scale, and instability at the Li||SSE and cathode||SSE interfaces, which limits cell performance and lifetime. Atomic layer deposition is leveraged to grow thin Al 2 O 3 coatings on Li 6 PS 5 Cl powders to address both issues simultaneously. These coatings can be directly grown onto Li 6 PS 5 Cl particles with negligible chemical modification of the underlying material and enable exposure of powders to pure and H 2 O‐saturated oxygen environments for ≥4 h with minimal reactivity, compared with significant degradation of the uncoated powder. Pellets fabricated from coated powders exhibit ionic conductivities up to 2× higher than those made from uncoated material, with a simultaneous decrease in electronic conductivity and significant suppression of chemical reactivity at the Li‐SSE interface. These benefits result in significantly improved room temperature cycle life at high capacity and current density. It is hypothesized that this enhanced performance derives from improved intergranular properties and improved Li metal adhesion. This work points to a completely new framework for designing active, stable, and scalable materials for next‐generation solid‐state batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Interactions Between Climate and Species Drive Future Forest Carbon and Water Balances

Global change is altering forest carbon and water balances; however, the extent to which tree species shape ecosystem‐scale responses to climate, particularly in biodiverse forests, remains unclear. To address this, we simulated the effects of an envelope of future climate conditions on watershed carbon and water balances and quantified the contributions of tree species based on their xylem anatomy. We accomplished this by incorporating species‐level transpiration calculations into a landscape‐scale ecosystem process model. Our revised model linked the effects of forest succession, species composition, and climate change on water and carbon. Calibration of forest water fluxes using sap flux measurements and catchment water balances captured variability in species transpiration and interannual ET in biodiverse, humid temperate forest catchments in the southern Blue Ridge Mountains, USA. Across wet and dry future climate projections, ET increased, and streamflow and net carbon uptake decreased, particularly under a scenario of increasing drought. Despite accounting for just 30% of current biomass, diffuse‐porous tree species were the main driver of carbon and water flux responses now and in the future, thus intensifying the increase in ET and decline in streamflow. As diffuse‐porous biomass continues to increase, these forests will be increasingly sensitive to drought, amplifying losses of carbon sequestration and freshwater delivery.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Restoring freshwater habitat mosaics to promote resilience of vulnerable salmon populations

Phenotypic diversity and abundance drive salmon resilience in the face of increasing environmental variability. But what happens when human activities fundamentally alter the habitat complexity that drives this diversity? And how can we restore habitats to recover both diversity and abundance to support salmon persistence in a warming climate? Here, we looked at the impact of a large watershed restoration effort on the abundance and climate resilience of the three remaining core natural spring-run Chinook Salmon populations in the California Central Valley (Butte, Mill, and Deer Creek). Butte Creek fish, which have floodplain access, had higher overall productivity and faster juvenile growth compared with Mill and Deer Creek populations, and the proportion of floodplain inundation was positively correlated with Butte Creek adult abundance two years later. While Butte Creek exhibited significant increases in abundance post-restoration (~2000%), it generally exhibited lower phenotypic diversity and only a marginal increase in population stability after restoration based on the coefficient of variation (CV). In particular, Butte Creek salmon tended to exhibit larger drops in escapement following dry years (e.g., return years 2010, 2017) compared with Mill and Deer Creek populations, presumably due to limited inundation of its downstream floodplain. The late-migrating juvenile strategy (i.e., yearling), which disproportionately supported Mill and Deer Creek populations during droughts, was uncommon among Butte Creek adults (averaging 60% of returns for Mill and Deer Creek vs. 0.3% for Butte Creek). Increased spring-run stock complex stability was found, post-restoration, when combining the three spring-run populations (i.e., lower aggregate CV). However, among-river pairwise correlations also suggested increased synchronization in population abundances post-restoration, potentially due to increasing frequency and severity of extreme climatic events (e.g., droughts and ocean warming). This study underscores the importance of restoring a connected mosaic of aquatic habitats across modified landscapes, such as cold water refugia and floodplains, to preserve multiple (across-population) life history pathways for increasing salmon stock complex stability and abundance. These landscape-scale process-based habitat restoration efforts are likely to be crucial for the successful long-term recovery of vulnerable species in a rapidly changing climate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Temperature response and brine availability to heated boreholes in bedded salt

Abstract There is a growing need for disposal of high‐level nuclear waste. To reduce uncertainty associated with brine availability to repository excavations in salt formations, a collaboration between Sandia, Los Alamos, and Lawrence Berkeley National Laboratories is performing a series of borehole‐scale coupled process tests. Here, we report on the first round of the Brine Availability Test in Salt (BATS) project, a “shakedown” experiment called Phase 1s. Experimental testing included placing a resistive heater, a 260‐W radiative heater, and a 750‐W radiative heater within previously drilled horizontal boreholes at the Waste Isolation Pilot Plant (WIPP) while monitoring temperature and water inflow. The experiments successfully achieved the targeted temperature of 120 °C when using the 750‐W radiative heater. Simulations using FEHM (Finite Element Heat and Mass transfer code) and TOUGH‐FLAC (Transport Of Unsaturated Groundwater and Heat–Fast Lagrangian Analysis of Continua) were able to accurately predict the coupled thermo–hydro–mechanical–chemical response of salt, matching the observed temperature and brine production. Due to the extremely low permeability of salt, these systems take many years to reach steady state when perturbed by mining activities. Long‐term numerical simulations are used to develop the initial pressure and saturation conditions. The inclusion of a damaged rock zone with higher permeability around the borehole also affects the saturation and pressure distributions and plays an important role in dissipating the potential for thermal pressurization. Knowledge gained from this round of experimentation and simulation will be used to conduct the next BATS project experiment in new boreholes at WIPP.

58 GEOSCIENCES↗
DOE OSTI2023

Region and cloud regime dependence of parametric sensitivity in E3SM atmosphere model

Abstract The Department of Energy (DOE)’s Energy Exascale Earth System Model (E3SM), including its atmosphere model (EAM), has many relatively new features. In a previous study we conducted a systematic parametric sensitivity analysis for EAM based on short, perturbed parameter ensemble (PPE) simulations, mainly focusing on global mean climate features and metrics. While parameter values in global climate models are generally invariant in space and time, model response to parameters perturbation may vary by regions and climate regimes, which motivates the need to better understand the EAM model behaviors and physics at regional scale and process level. In this study, using the same set of PPE simulations and a similar sensitivity analysis framework, we identify parameters that cause largest sensitivities over different regions and compare model responses in fast atmospheric processes to the parameters across different cloud regimes for several important cloud-related fidelity metrics. We find that cloud forcing has opposite response to some parameters over mid-latitude vs. tropical land. We also analyze how the parametric sensitivity varies as stratocumulus transitions to shallow convection and to deep convection over ocean. Low cloud forcing and shortwave cloud forcing in the subtropical eastern Pacific are most sensitive to the parameters controlling the width of the probability density function (PDF) of the subgrid vertical velocity ( w’ ) ( gamma ) and the damping of the w’ skewness ( c8 ) near the coast but become more sensitive to the parameter affecting the damping of the w’ variance ( c1 ) further offshore. Detailed interpretation of the spatial dependence of parametric sensitivity is provided. We also investigate how the parametric sensitivity evolves with prediction duration. This study improves our process-level understanding of cloud physics and parameterization and provides insights for developing more advanced regime-aware parameterization schemes in global climate model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Anion-derived contact ion pairing as a unifying principle for electrolyte design

Enabling new electrochemical technologies requires systems that can operate under ever-more demanding conditions, and progress in energy storage applications reveals tantalizing opportunities to reimagine electrolyte design for performance at extreme potentials. Here, a common thread among these innovations is the formation of significant populations of contact ion pairs (CIPs) in the electrolyte, regardless of the specific cation chemistry or solvent system. The examples summarized in this review suggest that a set of general electrolyte design rules likely exists, where the purposeful selection of anion chemistry can yield CIP structures with tunable control over reaction thermodynamics, kinetics, and interphase chemistry. Identifying the relevant descriptors for high-performance, anion-derived CIP structures can be achieved utilizing a combined experimental and computational approach, aided by machine learning and artificial intelligence, to more rapidly survey the vast combinatorial space available and to enable a new generation of electrolytes for decarbonized electrochemical processes at scale.

electrochemistry↗
DOE OSTI2024

Co-treating flue gas desulfurized effluent and produced water enables novel waste management and recovery of critical minerals

Herein this study reports a novel approach of resource recovery from co-managing two geographically co-located and chemically complementary wastewaters using a pilot-scale treatment process. Designed to treat flue gas desulfurized (FGD) effluent from combustion powerplants and produced water (PW) from energy industries, the process consists of soda-ash softening, nanofiltration (NF), and reverse osmosis (RO). Recovered products are barite, calcite, and low-salinity water. Using field-collected waters, the results show that softening at pH 8.5 produces calcite (yield: 30 kg/m 3 treated water), a chemical used as SO ₂(g) scrubbers. NF treatment under an applied pressure of 3.5 MPa yields a permeate stream laden with monovalent ions (water recovery 60%) and a concentrate stream with a sulfate concentration 1.8 times of the feedwater concentration. Mixing the NF concentrate and PW at a volumetric ratio of 1.0 precipitates a high-density barite material (4.1 g/cm 3 , yield: ~7.5 kg/m 3 mixture) – a critical mineral commonly used as a weighting agent in drilling. The RO treatment recovers >64% water as the permeate, which can be readily used as cooling make-up water at the powerplants. The RO concentrate stream can be further processed in a thermal evaporative system for additional water recovery and brine production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Zigzag flow reactor for weekly thermochemical energy storage

This paper describes theoretical models and experimental performance of a novel Zigzag Flow Reactor (ZFR) for weekly thermochemical energy storage. The ZFR reduces redox-active metal oxide (MO x ) particles at high temperature (up to ~1100 °C) under inert gas sweep. A physical model demonstrates the approach to process equilibrium by minimizing the associated exergy destruction in a finite number of reaction steps, establishing the thermodynamic requirements for a practical reactor. The model results show several cost-relevant parameter tradeoffs, and the tradeoff analysis implies a cost-optimized set of boundary conditions. Numerical models and prototypes show that the ZFR enables significant gas phase homogenization while simultaneously enabling a customizable MO x residence time in the reactor, both key requirements for approaching an equilibrium process. A scaling model demonstrates the simplicity and affordability of sizing the ZFR to grid-scale levels, with fabrication costs at least five times lower than previously proposed scalable reactor concepts. As a result, a laboratory ZFR prototype achieved an energy storage density of ~90 Wh/kg with CaAl 0.2 Mn 0.8 O 3-δ as the MO x , at temperatures of ~850 °C in >10 h of total runtime.

Thermochemical energy storage↗