Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Magnetic Properties of Ru-Doped Nd{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}Ru{sub x}O{sub 3} (0 ≤ x ≤ 0.10) Manganites

The structural and magnetic properties of polycrystalline Nd{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}Ru{sub x}O{sub 3} (x = 0.00 and 0.10) samples have been studied with the substitution of Ru at Mn site. The samples have orthorhombic crystal structure determined by room-temperature X-ray diffraction and Rietvield analysis. On Ru doping at Mn site, a change in its symmetry space group is observed. The increase in Ru content significantly affects the Curie temperature (T{sub c}). The double-exchange mechanism is suppressed with Ru doping affecting the Mn{sup 3+}–O{sup 2−}–Mn{sup 4+} ion network. Paramagnetic regime of samples in magnetization-temperature graph is fitted and analyzed with Curie-Weiss law. The magnetization versus applied magnetic field measurements show that the samples exhibit ferromagnetic behavior at lower temperatures and paramagnetic behavior at room temperature with negligible hysteresis loop and low coercive field.

36 MATERIALS SCIENCE↗

Characterization of Polycrystalline Fe{sub 2}B Compound with High Saturation Magnetization

The crystal structure, magnetic phase transition, high saturation magnetization, and chemical status of polycrystalline Fe{sub 2}B compound were investigated. The results show that a single phase with the CuAl{sub 2}-type tetragonal structure with space group of I4/mcm is clearly observed, and the Curie temperature is 1017 K. A maximum value of saturation magnetization (M) of 173 Am{sup 2}⋅kg{sup −1} was achieved when the saturated magnetic field was ∼5 kOe at 300 K. Moreover, XPS proved that the chemical status of Fe and B elements existed in the form of Fe{sub 2}B in this compound. The polycrystalline Fe{sub 2}B compound with large saturation magnetization is economical and non-toxic raw materials, which would be of considerable importance for exploring the potential applications in the magnetic functional material field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of crystal orientation on the formation of femtosecond laser-induced periodic surface structures and lattice defects accumulation

The influence of crystal orientation on the formation of femtosecond laser-induced periodic surface structures (LIPSS) has been investigated on a polycrystalline nickel sample. Electron Backscatter Diffraction characterization has been exploited to provide structural information within the laser spot on irradiated samples to determine the dependence of LIPSS formation and lattice defects (stacking faults, twins, dislocations) upon the crystal orientation. Significant differences are observed at low-to-medium number of laser pulses, outstandingly for (111)-oriented surface which favors lattice defects formation rather than LIPSS formation.

36 MATERIALS SCIENCE↗

Influence of Sm doping on structural and dielectric properties of Y{sub 1-x}Sm{sub x}MnO{sub 3} (x = 0, 0.10, 0.20) manganites

Structural and dielectric properties of polycrystalline YMnO{sub 3} (x = 0.0, 0.10 and 0.20) which was prepared by solid-state reaction route, have been investigated. The X-ray diffraction pattern reveals that all the samples are in single phase and show hexagonal structure with P63cm space group. The particle size decreases with increase in Sm doping while to that X-ray density increases with increasing x. The dielectric constant (ε’) of Y{sub 1-x}Sm{sub x}MnO{sub 3} measured in the frequency range 10 Hz to 1MHz is much higher at lower frequencies (≤ 1KHz) and its value decreases with enhanced frequency. At very high frequencies, ε’ becomes frequency independent and is attributed to Maxwell Wagner type of interfacial polarization model. A very high value of dielectric constant ∼18642 is observed for x = 10%. The dielectric loss (tan δ) decreases wit increase in Sm doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of electronic structure of periodically strained graphene

We induced periodic biaxial tensile strain in polycrystalline graphene by wrapping it over a substrate with repeating pillar-like structures with a periodicity of 600 nm. Using Raman spectroscopy, we determined to have introduced biaxial strains in graphene in the range of 0.4% to 0.7%. Its band structure was characterized using photoemission from valance bands, shifts in the secondary electron emission, and x-ray absorption from the carbon 1s levels to the unoccupied graphene conduction bands. It was observed that relative to unstrained graphene, strained graphene had a higher work function and higher density of states in the valence and conduction bands. Furthermore, we measured the conductivity of the strained and unstrained graphene in response to a gate voltage and correlated the changes in their behavior to the changes in the electronic structure. From these sets of data, we propose a simple band diagram representing graphene with periodic biaxial strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aging effects of the precursor solutions on the properties of spin coated Ga-doped ZnO thin films

In this study, gallium doped zinc oxide thin films (GZO) were grown on a glass substrate by a simple sol-gel process and spin coating technique using zinc acetate and gallium nitrate (3at%) as precursors for Zn and Ga ions respectively. The effects of aging time of the precursor solution on the structural and optical properties of the GZO films were investigated. The surface morphology, grain size, film thickness and optical properties of the GZO films were found to depend directly on the sol aging time. XRD studies reveal that the films are polycrystalline with a hexagonal wurtzite structure and show the c-axis grain orientation. Optical transmittance spectra of all the films exhibited transmittance higher than about 82% within the visible wavelength region. A sharp fundamental absorption edge with a slight blue shifting was observed with an increase in sol aging time which can be explained by Burstein-Moss effect. The result indicates that an appropriate aging time of the sol is important for the improvement of the structural and optical properties of GZO thin films derived from sol-gel method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-energy diffraction microscopy at the advanced photon source

The status of the High Energy Diffraction Microscopy (HEDM) program at the 1-ID beam line of the Advanced Photon Source is reported. HEDM applies high energy synchrotron radiation for the grain and sub-grain scale structural and mechanical characterization of polycrystalline bulk materials in situ during thermomechanical loading. Case studies demonstrate the mapping of grain boundary topology, the evaluation of stress tensors of individual grains during tensile deformation and comparison to a finite element modeling simulation, and the characterization of evolving dislocation structure. Complementary information is obtained by post mortem electron microscopy on the same sample volume previously investigated by HEDM.

43 PARTICLE ACCELERATORS↗

Structural and double magnetic transitions in the frustrated spin- 1 2 capped-kagome antiferromagnet ( RbCl ) Cu 5 P 2 O 10

The structural and magnetic properties of the geometrically frustrated spin- 1 2 capped-kagome antiferromagnet (RbCl) Cu 5 P 2 O 10 are investigated via temperature-dependent x-ray diffraction, magnetization, heat capacity, and 31 P NMR experiments on a polycrystalline sample. It undergoes a structural transition at around T t ≃ 310 K from a high-temperature trigonal (P ¯3m1) to a low-temperature monoclinic (C2/c) unit cell, where the low-temperature structure features the capped-kagome geometry of Cu 2+ ions. Interestingly, it shows the onset of two successive magnetic transitions at T N1 ≃ 20 K and T N2 ≃ 7 K. The shape of the 31 P NMR spectra unfolds the possible nature of the transitions below T N1 and T N2 to be of incommensurate and commensurate antiferromagnetic type, respectively. A large value of the Curie-Weiss temperature as compared to T N1 sets the frustration parameter f ≃ 8, ensuring strong magnetic frustration in the compound. From the 31 P NMR spin-lattice relaxation rate, the leading antiferromagnetic exchange coupling is estimated to be J/k B ≃ 117 K. Furthermore, these unusual double magnetic transitions make this compound beguiling for further investigations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Current transport mechanisms in plasma-enhanced atomic layer deposited AlN thin films

Here, we report on the current transport mechanisms in AlN thin films deposited at a low temperature (i.e., 200 °C) on p-type Si substrates by plasma-enhanced atomic layer deposition. Structural characterization of the deposited AlN was carried out using grazing-incidence X-ray diffraction, revealing polycrystalline films with a wurtzite (hexagonal) structure. Al/AlN/ p-Si metal-insulator-semiconductor (MIS) capacitor structures were fabricated and investigated under negative bias by performing current-voltage measurements. As a function of the applied electric field, different types of current transport mechanisms were observed; i.e., ohmic conduction (15.2–21.5 MV/m), Schottky emission (23.6–39.5 MV/m), Frenkel-Poole emission (63.8–211.8 MV/m), trap-assisted tunneling (226–280 MV/m), and Fowler-Nordheim tunneling (290–447 MV/m). Electrical properties of the insulating AlN layer and the fabricated Al/AlN/p-Si MIS capacitor structure such as dielectric constant, flat-band voltage, effective charge density, and threshold voltage were also determined from the capacitance-voltage measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Overcoming challenges to the formation of high-quality polycrystalline TiO{sub 2}:Ta transparent conducting films by magnetron sputtering

The work is focused on understanding the physical processes responsible for the modification of the structure, electrical and optical properties of polycrystalline TiO{sub 2}:Ta films formed by annealing of initially amorphous films grown by direct current magnetron sputtering of electrically conductive ceramic targets. It is shown that fine tuning of the oxygen content during deposition of amorphous TiO{sub 2}:Ta films is critical to achieving low resistivity and high optical transmittance after annealing. Increasing the total pressure during magnetron sputter deposition is shown to decrease the sensitivity of the annealed films to the oxygen flow variation during deposition of the initially amorphous layers. Polycrystalline anatase TiO{sub 2}:Ta films of low electrical resistivity (ρ{sub H} = 1.5 × 10{sup −3}Ω cm), high free electron mobility (μ{sub H} = 8 cm{sup 2}/Vs), and low extinction (k{sub 550nm} = 0.006) are obtained in this way at a total pressure of 2 Pa. The dependence of the polycrystalline film electrical properties on the oxygen content is discussed in terms of Ta dopant electrical activation/deactivation taking into account the formation of compensating defects at different oxygen pressures. The temperature-dependent transport of the polycrystalline anatase TiO{sub 2}:Ta films is investigated showing the dominant role of the optical phonon scattering in the case of films with an optimum Ti/O ratio.

36 MATERIALS SCIENCE↗

Dynamic structures in shock-loaded copper

Shock loading of polycrystalline copper under uniaxial strain conditions at 6.2 divide 7.3 GPa results in nucleating the dissipative structures of 5 divide 25 {mu}m in diameter. Interior of each structure is a network of microshear bands of 100 divide 300 nm spacing. Nucleation of structures occurs at the impact velocity where particle velocity dispersion begins to grow faster than mean particle velocity or when the local strain rate at the mesoscale becomes higher than the macroscopic strain rate. Simultaneously, defect of particle velocity at the plateau of compressive pulse, macrohardness, and spall strength grow in the same manner. Physically, nucleation of dissipative structures is estimated to be initiated under resonance condition between space periods of polarized dislocation structure and driving plastic front.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the properties of CuInSe{sub 2} materials prepared from nanoparticle powder

This work studies the properties of CuInSe{sub 2} (CIS) thin films obtained from nanoparticle powder. The samples were prepared by direct thermal evaporation of ball milled powder from a tungsten crucible onto precleaned glass substrates, using a BALZERS coating unit. The as deposited films were annealed in a vacuum at different temperatures. The composition, structure, morphology and optical properties of these samples have been investigated. X-ray diffraction (XRD) results showed that the CuInSe{sub 2} phase may be prepared by mechanical alloying method. The crystallites of the CIS powder were found to be partially copper-rich. The as-deposited film was polycrystalline in nature having chalcopyrite structure as a mainly phase. The surface morphology is homogeneous across the surface. Expected optical properties (E{sub g} = 1.04 eV, {alpha} {approx} 10{sup 4} cm{sup -1}) and near stoichiometric composition (Cu: 23.62 at.%, In: 24.35 at.% and Se: 52.03 at.%) were determined.

36 MATERIALS SCIENCE↗

Atomic layer deposition of CdO and Cd x Zn 1-x O films

Growth of Cd x Zn 1-x O by atomic layer deposition (ALD) is demonstrated at 150 °C using diethylzinc (DEZn), dimethylcadmium (DMCd), and water as the precursors. The relative ratio of the DMCd and DEZn pulses is varied to achieve different compositions ranging from pure CdO to pure ZnO. The crystal structure of CdO is rock salt cubic and that of ZnO is hexagonal, and the alloy from ZnO to at least Cd 0.56 Zn 0.44 O has a hexagonal crystal structure. Transmission electron microscopy confirms polycrystalline grain features and a growth rate of ~2.0 Å cycle-1, while selected area diffraction provides crystallographic information indicating that {111} type planes of the pure CdO ALD film are preferentially oriented to the film surface. Using spectroscopic ellipsometry, the film's optical constants are correlated with elemental composition and crystal structure. Control of these properties allows for tuning of the optical bandgap and index of refraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic step disorder on polycrystalline surfaces leads to spatially inhomogeneous work functions

Structural disorder causes materials’ surface electronic properties, e.g., work function (ϕ), to vary spatially, yet it is challenging to prove exact causal relationships to underlying ensemble disorder, e.g., roughness or granularity. For polycrystalline Pt, nanoscale resolution photoemission threshold mapping reveals a spatially varying ϕ=5.70±0.03 eV over a distribution of (111) vicinal grain surfaces prepared by sputter deposition and annealing. With regard to field emission and related phenomena, e.g., vacuum arc initiation, a salient feature of the ϕ distribution is that it is skewed with a long tail to values down to 5.4 eV, i.e., far below the mean, which is exponentially impactful to field emission via the Fowler–Nordheim relation. We show that the ϕ spatial variation and distribution can be explained by ensemble variations of granular tilts and surface slopes via a Smoluchowski smoothing model wherein local ϕ variations result from spatially varying densities of electric dipole moments, intrinsic to atomic steps, that locally modify ϕ. Atomic step-terrace structure is confirmed with scanning tunneling microscopy (STM) at several locations on our surfaces, and prior works showed STM evidence for atomic step dipoles at various metal surfaces. From our model, we find an atomic step edge dipole μ=0.12 D/edge atom, which is comparable to values reported in studies that utilized other methods and materials. Our results elucidate a connection between macroscopic ϕ and the nanostructure that may contribute to the spread of reported ϕ for Pt and other surfaces and may be useful toward more complete descriptions of polycrystalline metals in the models of field emission and other related vacuum electronics phenomena, e.g., arc initiation.

36 MATERIALS SCIENCE↗

Structural characterization of InSb thin films grown by electrodeposition

In the present work we have grown InSb thin films on brass substrates, using the electrodeposition technique. The electrochemical baths used in the growth were made up of aqueous solutions of InCl{sub 3} and SbCl{sub 3} mixed together in various proportions. The films grown were characterized by X-Ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive Analysis of X-rays (EDAX). Compositional studies show that stoichiometric InSb films can be prepared from a bath containing 0.05M InCl{sub 3} and 0.04M SbCl{sub 3}. XRD studies reveal that the films grown are polycrystalline having the zinc blende structure with (111) orientation. Crystallite size, dislocation density and strain were calculated using the XRD results. Optical transmission spectra were recorded using an FTIR spectrophotometer. The value of direct band gap was found to be around 0.20 eV for the thin films having the best stoichiometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The surface triple-coupling on single crystalline cathode for lithium ion batteries

Single crystalline (SC) cathode materials, which are less susceptible to micro/nano-cracks formation and offer better structure stability compared to the polycrystalline counterpart, have attained great attention. However, the parasitic side reactions at the cathode-electrolyte interface induces the loss of active species, which consequently leads to continual degradation of the electrochemical performances. Herein, a triple coupling of concentration-gradient Na+, F- co-doping and surface NaF coating are exploited for the first time on SC LiNi 0.5C o 0.2 Mn 0.3 O 2 cathode by the hydrolysis of NaPF 6 . This process regulates the external structure of materials by constructing a “sandwich” configuration from surface to bulk: rock salt - mixing zone - layered phase. The detailed interface transformation mechanism is revealed by Neutron powder diffraction (NPD), spherical aberration corrected high-resolution scanning transmission electron microscopy (HR-STEM), electron energy loss spectroscopy (EELS), and Ar+ sputtering assisted X-ray photoelectron spectroscopy (XPS). The synergistic effects endow the SC cathode with outstanding capacity retentions: 91.3% at 25 °C and 85% at 45 °C, after 500 cycles at 5 C between 3.0 and 4.5 V. In addition, a high full-cell reversible capacity of 168.9 mAh g -1 with a capacity retention of 92.4% is achieved after 300 cycles at 1 C. Multiple characterizations further indicate that these superior results are mainly ascribed to the overall structure integrity of SC material, the thin cathode electrolyte interface, high content of lithium fluoride, and the low solubility of transition metal ions. This work opens a new avenue to construct a benign interface towards high-performance lithium ion batteries.

lithium ion batteries↗

Comparative Studies on Temperature Dependent I-V Characteristics of Al/(p)CdTe and Ni/(n)CdS Schottky Junctions and Their PV Effect

Temperature dependent I-V characteristics of vacuum evaporated Al/(p)CdTe and Ni/(n)CdS Schottky junctions and their photovoltaic effects have been studied and compared. Different junction parameters such as ideality factors, barrier heights, Richardson's constant, short-circuit current density, fill factor, PV efficiency etc. were determined from their I-V characteristics. These parameters were found to change significantly on variation of temperature. The structures showed the change of PV effect. Efficiency found were 2.84% for Al/(p)CdTe and 4.44% for Ni hydro/(n)CdS. Polycrystalline nature, and continuous and ordered structure with bigger grain sizes of the CdS film shows more PV conversion efficiency in making Ni/(n)CdS junction as compare to Al/(p)CdTe junction. However these values were found to vary with doping concentration, and in hydrogen treated samples in both cases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetron sputtered nanostructured cadmium oxide films for ammonia sensing

Nanostructured cadmium oxide (CdO) films were deposited on to glass substrates by reactive dc magnetron sputtering technique. The depositions were carried out for different deposition times in order to obtain films with varying thicknesses. The CdO films were polycrystalline in nature with cubic structure showing preferred orientation in (1 1 1) direction as observed by X-ray diffraction (XRD). Field-emission scanning electron microscope (FE-SEM) micrographs showed uniform distribution of grains of 30–35 nm size and change in morphology from spherical to elliptical structures upon increasing the film thickness. The optical band gap value of the CdO films decreased from 2.67 to 2.36 eV with increase in the thickness. CdO films were deposited on to interdigitated electrodes to be employed as ammonia (NH{sub 3}) gas sensor. The fabricated CdO sensor with thickness of 294 nm has a capacity to detect NH{sub 3} as low as 50 ppm at a relatively low operating temperature of 150 °C with quick response and recovery time. - Highlights: • Nanostructured CdO films were deposited on to glass substrates using magnetron sputtering. • Deposition time was varied in order to obtain films with different thicknesses. • The CdO films were polycrystalline in nature with preferred orientation along (1 1 1) direction. • The optical bandgap values of the films decreased on increasing the thickness of the films. • CdO films with different thickness such as 122, 204, 294 nm was capable to detect NH{sub 3} down to 50 ppm at operating temperature of 150 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗