Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pattern Factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

The heavy ion compositional signature in 3He-rich solar particle events

A survey of the approx. 1 MeV/nucleon heavy ion abundances in 66 He3-rich solar particle events was performed using the Max-Planck-Institut/University of Maryland and Goddard Space Flight Center instruments on the ISEE-3 spacecraft. The observations were carried out in interplanetary space over the period 1978 October through 1982 June. Earlier observations were confirmed which show an enrichment of heavy ions in HE3-rich events, relative to the average solar energetic particle composition in large particle events. For the survey near 1.5 MeV/nucleon the enrichments compared to large solar particle events are approximately He4:C:O:Ne:Mg:Si:Fe = 0.44:0.66:1.:3.4:3.5:4.1:9.6. Surprising new results emerging from the present broad survey are that the heavy ion enrichment pattern is the same within a factor of approx. 2 for almost all cases, and the degree of heavy ion enrichment is uncorrelated with the He3 enrichment. Overall, the features established appear to be best explained by an acceleration mechanism in which the He3 enrichment process is not responsible for the heavy ion enrichment, but rather the heavy ion enrichment is a measure of the ambient coronal composition at the sites where the He3-rich events occur.

Mason, G. M.↗

The heavy-ion compositional signature in He-3-rich solar particle events

A survey of the approx. 1 MeV/nucleon heavy ion abundances in 66 He-3-rich solar particle events was performed using the Max-Planck-Institut/University of Maryland and Goddard Space Flight Center instruments on the ISEE-3 spacecraft. The observations were carried out in interplanetary space over the period 1978 October through 1982 June. Earlier observations were confirmed which show an enrichment of heavy ions in He-3-rich events, relative to the average solar energetic particle composition in large particle events. For the survey near 1.5 MeV/nucleon the enrichments compared to large solar particle events are approximately He4:C:O:Ne:Mg:Si:Fe = 0.44:0.66:1.:3.4:3.5:4.1:9.6. Surprising new results emerging from the present broad survey are that the heavy ion enrichment pattern is the same within a factor of approx. 2 for almost all cases, and the degree of heavy ion enrichment is uncorrelated with the He-3 enrichment. Overall, the features established appear to be best explained by an acceleration mechanism in which the He-3 enrichment process is not responsible for the heavy ion enrichment, but rather the heavy ion enrichment is a measure of the ambient coronal composition at the sites where the He-3-rich events occur.

Mason, G. M.↗

An experimental study of shock wave/vortex interaction

The interaction of a supersonic streamwise vortices (of Mach number 2.2, 3.0, and 3.5) with a normal shock wave has been experimentally investigated, and is found to be highly unsteady. Five-hole pressure-probe and temperature measurements ahead of the interaction are used as initial conditions for an axisymmetric Navier-Stokes calculation. The numerical results supports the hypothesis that supersonic vortex breakdown is an important factor in the observed interaction flow pattern.

Metwally, O. M.↗

Signal-to-noise ratios in IUE low-dispersion spectra. II - Photometrically corrected images

Photometrically corrected images from the IUE's two intensified vidicon cameras are used to explore the character of detector noise, and a protocol for the derivation of realistic noise models is proposed on the basis of available collections of UV-Flood calibration images. The incomplete removal of the pixel-to-pixel sensitivity pattern can lead to a factor-of-2 enhancement in apparent noise; even with good suppression of pixel granularity, the remaining random noise can exhibit saturation behavior which causes S/N to cease improving with increasing exposure. When all relevant effects are considered, underlying, 'pristine' noise models show virtually no dependence on spatial position.

Ayres, Thomas R.↗

Heat transfer from cylinders having closely spaced fins

The heat-transfer coefficients have been determined for five steel cylinders having fins 1.22 inches wide and the spacing between the fins ranging from 0.022 to 0.131 inch. The cylinders were tested with and without baffles in a wind tunnel; they were also tested enclosed in jackets with the cooling air supplied by a blower. A maximum heat transfer was reached at a fin space of about 0.45 inch for the cylinders tested with each of the three methods of cooling investigated. The rise in temperature of the air passing between the fins and the change in flow pattern were found to be important factors limiting the heat transfer that may be obtained by decreasing the fin space. The use of baffles for directing the air around the cylinders with closely spaced fins proved very effective in increasing the over-all heat-transfer coefficient, provided that the spacing was not appreciably less than that for maximum heat transfer.

Biermann, Arnold E↗

Effects of sleep loss, time of day, and extended mental work on implicit and explicit learning of sequences

Tacit knowledge is part of many professional skills and can be studied experimentally with implicit-learning paradigms. The authors explored the effects of 2 different stressors, loss of sleep and mental fatigue, on implicit learning in a serial-response time (RT) task. In the 1st experiment, 1 night of sleep deprivation was shown to impair implicit but not explicit sequence learning. In the 2nd experiment, no impairment of both types of sequence learning was found after 1.5 hr of mental work. Serial-RT performance, in contrast, suffered from both stressors. These findings suggest that sleep deprivation induces specific risks for automatic, skill-based behavior that are not present in consciously controlled performance.

Learning↗

A signal detection model predicts the effects of set size on visual search accuracy for feature, conjunction, triple conjunction, and disjunction displays

Recently, quantitative models based on signal detection theory have been successfully applied to the prediction of human accuracy in visual search for a target that differs from distractors along a single attribute (feature search). The present paper extends these models for visual search accuracy to multidimensional search displays in which the target differs from the distractors along more than one feature dimension (conjunction, disjunction, and triple conjunction displays). The model assumes that each element in the display elicits a noisy representation for each of the relevant feature dimensions. The observer combines the representations across feature dimensions to obtain a single decision variable, and the stimulus with the maximum value determines the response. The model accurately predicts human experimental data on visual search accuracy in conjunctions and disjunctions of contrast and orientation. The model accounts for performance degradation without resorting to a limited-capacity spatially localized and temporally serial mechanism by which to bind information across feature dimensions.

Non-NASA Center↗

Assessing Energy Impacts of Connected and Automated Vehicles at the U.S. National Level—Preliminary Bounds and Proposed Methods

Connected and automated vehicles (CAVs) can have tremendous impacts on transportation energy use. Using published literature to establish bounds for factors impacting vehicle demand and vehicle efficiency, we find that CAVs can potentially lead to a threefold increase or decrease in light-duty vehicle energy consumption in the United States. Much of this uncertainty is due to possible changes in travel patterns (in vehicle miles traveled) or fuel efficiency (in gallons per mile), as well as future adoption levels and patterns of use. This chapter details the factors which go into these estimates, and presents a methodological approach for refining this wide range of estimated fuel consumption.

Stephens, Thomas↗

Hydrothermal Exploration Best Practices and Geothermal Knowledge Exchange on OpenEI

Though exploring for hydrothermal resources is not new, advances in exploration technologies and the pursuit of less visible resources have created a need to outline exploration best practices. This multi-year study outlines 21 geothermal exploration regions in the Western United States. These regions were developed based on the U.S. Geological Survey (USGS) physiographic regions, then adjustedto fit geothermal parameters such as differences in geologic regime, structure, heat source, surface effects (weather, vegetation patterns, groundwater flow), and other relevant factors. Literature searches were conducted in each of these 21 regions for the application of field reconnaissance, geochemical, geophysical and remote sensing techniques. At this time, data from more than 250 referenceshave been cataloged in U.S. Department of Energy's (DOE) OpenEnergy Information (OpenEI, http://en.openei.org) website, which allows industry to access data information and run analyses on specific data attributes. The platform also allows updates, edits, and additions from the public so that the dataset can be expanded as industry's knowledge grows. In addition to the literature survey,interviews were conducted with exploration experts with both geothermal and oil-and-gas industry experience to identify the exploration challenges and best practices for the exploration regions. This paper defines and describes the geothermal regions developed for this study, describes how exploration techniques contribute to hydrothermal analyses (structural, petrologic, temperature, andhydrologic), and defines the exploration hurdles and best practices for each region. The results of the study and accompanying data sets on OpenEI will be available through the National Geothermal Data System.

15 GEOTHERMAL ENERGY↗

Design Choices in Anomaly Detection for Industrial Control Systems: Insights from Gas Pipeline Data

Industrial control systems (ICS) remain vulnerable to increasingly sophisticated cyberattacks, yet evaluating anomaly detection models in these environments is challenging due to temporal dependencies, missing-not-at-random patterns, and extremely imbalanced datasets. These factors make common practices—especially random data splits and naïve imputation—prone to severe temporal leakage, which can inflate reported performance and obscure real-world limitations. In this work, we systematically examine classical machine learning models, temporal deep learning architecture, and tensor-decomposition–based methods on a gas-pipeline dataset using a fully temporally separated evaluation pipeline designed to mimic realistic deployment conditions. Our findings show that proper temporal handling and MNAR-aware preprocessing significantly alter the relative performance of popular anomaly-detection methods, providing practical guidance for designing reliable, leakage-resistant ICS intrusion-detection systems.

97 MATHEMATICS AND COMPUTING↗

Characterizing the Spread of COVID-19 from Human Mobility Patterns and SocioDemographic Indicators

Mobility is an indicator of human movement through space and time. With the increasing availability of geolocated data (from GPS, accelerometers, etc.), it is now possible to examine individual as well as group human mobility patterns. Human mobility is influenced by both intrinsic (i.e. personal motivations) and extrinsic (i.e., events like natural hazards or a pandemic like the COVID-19) factors. However, the intricate relationships between human mobility patterns and sociodemographic characteristics in the context of a pandemic are yet to be fully explored. Our goal is to overcome this gap by using human mobility data at the census block group level from mobile phones and combining those with social vulnerability indicators to examine the overall spread of COVID-19 at local spatial scales. We used 585,878 weekly visits to 37,871 points of interests (POIs) from Safegraph to quantify mobility indices and social distancing metrics in 2,820 census block groups in the city of Los Angeles (LA) - before and during lockdown as well as during the phase1 and phase 2 reopening. Finally, using supervised machine learning algorithms, we classified the census block groups in LA into High, Medium and Low categories that represented the vulnerability of these block groups based on the cumulative number of occurrences of COVID-19 cases till July 24, 2020. Our results indicate that the tree-based classifiers performed well in comparison to the Support Vector Machines and Multinomial Logit models. Gradient Boosting had the highest classification accuracy of 97.4% COVID-19 with an AUC score of 0.987. The block groups with high COVID-19 cases also had a high concentration of socially vulnerable populations, high human mobility index and a low social distancing index.

Roy, Avipsa↗

An Overview of Electric Vehicle Load Modeling Strategies for Grid Integration Studies

The adoption of electric vehicles (EVs) has emerged as a solution to reduce greenhouse gas emissions in the transportation sector, which has motivated the implementation of public policies to promote their use in several countries. However, the high adoption of EVs poses challenges for the electricity sector, as it would imply an increase in energy demand and possible impacts on the power quality (PQ) of the power grid. Therefore, it is important to conduct EV integration studies in the power grid to determine the amount that can be incorporated without causing problems and identify the areas of the power sector that will require reinforcements. Accurate EV load patterns are required for this type of study that, through mathematical modeling, reflect both the dynamic behavior and the factors that influence the decision to recharge EVs. This article aims to present an overview of EVs, examine the different factors considered in the literature for modeling EV load patterns, and review modeling methods. EV load modeling methods are classified into deterministic, statistical, and machine learning. The article shows that each modeling method has its advantages, disadvantages, and data requirements, ranging from simple load modeling to more accurate models requiring large datasets.

Computer Science↗

Forecasting Cool Season Daily Peak Winds at Kennedy Space Center and Cape Canaveral Air Force Station

The expected peak wind speed for the day is an important element in the daily 24-Hour and Weekly Planning Forecasts issued by the 45th Weather Squadron (45 WS) for planning operations at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The morning outlook for peak speeds also begins the warning decision process for gusts ^ 35 kt, ^ 50 kt, and ^ 60 kt from the surface to 300 ft. The 45 WS forecasters have indicated that peak wind speeds are a challenging parameter to forecast during the cool season (October-April). The 45 WS requested that the Applied Meteorology Unit (AMU) develop a tool to help them forecast the speed and timing of the daily peak and average wind, from the surface to 300 ft on KSC/CCAFS during the cool season. The tool must only use data available by 1200 UTC to support the issue time of the Planning Forecasts. Based on observations from the KSC/CCAFS wind tower network, surface observations from the Shuttle Landing Facility (SLF), and CCAFS upper-air soundings from the cool season months of October 2002 to February 2007, the AMU created multiple linear regression equations to predict the timing and speed of the daily peak wind speed, as well as the background average wind speed. Several possible predictors were evaluated, including persistence, the temperature inversion depth, strength, and wind speed at the top of the inversion, wind gust factor (ratio of peak wind speed to average wind speed), synoptic weather pattern, occurrence of precipitation at the SLF, and strongest wind in the lowest 3000 ft, 4000 ft, or 5000 ft. Six synoptic patterns were identified: 1) surface high near or over FL, 2) surface high north or east of FL, 3) surface high south or west of FL, 4) surface front approaching FL, 5) surface front across central FL, and 6) surface front across south FL. The following six predictors were selected: 1) inversion depth, 2) inversion strength, 3) wind gust factor, 4) synoptic weather pattern, 5) occurrence of precipitation at the SLF, and 6) strongest wind in the lowest 3000 ft. The forecast tool was developed as a graphical user interface with Microsoft Excel to help the forecaster enter the variables, and run the appropriate regression equations. Based on the forecaster's input and regression equations, a forecast of the day's peak and average wind is generated and displayed. The application also outputs the probability that the peak wind speed will be ^ 35 kt, 50 kt, and 60 kt.

Barrett, Joe, III↗

A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies

Abstract This letter solves a major hurdle that mars photolithography-based fabrication of micro-mesoscale structures in silicon. Conventional photolithography is usually performed on smooth, flat wafer surfaces to lay a 2D design and subsequently etch it to create single-level features. It is, however, unable to process non-flat surfaces or already etched wafers and create more than one level in the structure. In this study, we have described a novel cleanroom-based process flow that allows for easy creation of such multi-level, hierarchical 3D structures in a substrate. This is achieved by introducing an ultra-thin sacrificial silicon dioxide hardmask layer on the substrate which is first 3D patterned via multiple rounds of lithography. This 3D pattern is then scaled vertically by a factor of 200–300 and transferred to the substrate underneath via a single shot deep etching step. The proposed method is also easily characterizable—using features of different topographies and dimensions, the etch rates and selectivities were quantified; this characterization information was later used while fabricating specific target structures. Furthermore, this study comprehensively compares the novel pattern transfer technique to already existing methods of creating multi-level structures, like grayscale lithography and chip stacking. The proposed process was found to be cheaper, faster, and easier to standardize compared to other methods—this made the overall process more reliable and repeatable. We hope it will encourage more research into hybrid structures that hold the key to dramatic performance improvements in several micro-mesoscale devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spacesuit and Mobility Performance Changes

The complex interactions between the human body and spacesuit lead to changes inmovement patterns and mobility performancesof the wearer. In general, factors including the geometric properties, such as shape and size, mechanical properties of the suit, and pressurization of the suit are known to be associated with altered movement patterns as compared to an unsuited human.However, their relative contributions have not been explicitly quantified from the mobility performance perspectives. The goal of this study wasthus to assessthe effects fromthe different types of mobility constraintconditions, namely by wearing either a 3D printed hard upper torso (HUT) assembly orfully pressurized spacesuit. The outcome was also compared against the unsuited motions. For this study, an xEMU (exploration Extravehicular Mobility Unit) suitwas considered, which is the next generation spacesuit developed by NASA. In each test condition, the subject was asked to move the arm and hand as prescribedfor different task types, and the corresponding body segment locations were recordedusing a 3D motion capture system. The following three tasks were performedand analyzed: 1) Outward one-handed reaches:the subject in a standing pose made sweeping motions with the extended right arm from the extreme end-to-end positions, including side-to-side at different elevations and top-to-bottom at different azimuths. 2) Outward two-handed reaches:similarto the previous task, howeverthe subject kept the hands together during the motions in order to assessthe areas that can be reached by both hands. 3) Inward one-handed reaches:the subject made right-hand reach motions to the surface of the HUT.The hand traces collected from each task were modeled by a template shape parametrically deformed with a radial basis function. This process enabled foran abstraction of the hand traces into a smooth surface envelope representing the maximally reachable area of the test subject, of which the shapes and sizes were compared across the different test conditions. The preliminary analysis has shown that theoverall size of reachenvelopes decreases in a pressurized suit compared to 3D printed mockup HUT and unsuited conditions. The specific shape of the envelopes, which were determined by the reachable and unreachable zones, alsovary with the testconditions, and the differences werepronounced with the inward reaches to the HUT surface. The latter observation ispotentially relatedto the increased demandfor shoulder and elbow flexions.Overcomingthe resistance from the pressurizedsoft goods and mechanical constraints of the shoulder assemblywas seen to be associated with the difference in motion patterns between the suited and unsuited conditions. Overall, the information quantified from this study is expected to provide structured metrics for spacesuit mobility, which can improve design optimization and human-system integration.

K Han Kim↗

Symptoms and Systemic Drug Reactions in Persons Receiving Weekly Rifapentine Plus Isoniazid (3HP) Treatment for Latent Tuberculosis Infection

Abstract Background Three months of weekly rifapentine plus isoniazid (3HP) therapy for latent tuberculosis infection (LTBI) is recommended worldwide. The development of symptoms and systemic drug reactions (SDRs) on 3HP have not been fully characterized. We aimed to determine the patterns of symptom development and identify SDRs and associated factors in patients taking 3HP. Methods We analyzed symptoms data in participants receiving 3HP in the Tuberculosis Trials Consortium's iAdhere study (Study 33). We examined the patterns of symptom reporting across participants from baseline and 4 monthly visits. Bivariate analyses and multivariable regression models were used to identify factors associated with SDRs. Risk ratios (RRs) and 95% confidence intervals (CIs) were calculated. Results Among 1002 participants receiving 3HP, 768 (77%) reported at least 1 symptom; 97% of these symptoms were grade 1 (79%) or grade 2 (18%). Most symptoms developed in the first month and resolved. A total of 111 (11%) participants had symptoms that met criteria for SDRs; however, 53 (48%) of these participants completed therapy. Factors associated with SDRs and discontinuation included female sex (RR: 2.05; 95% CI: 1.19–3.54), age ≥45 years (RR: 1.99; 95% CI: 1.19–3.31), and use of concomitant medications (RR: 2.26; 95% CI: 1.15–4.42). Conclusions Although most patients receiving 3HP reported symptoms, most were mild, occurred early, and resolved without stopping treatment. Among patients experiencing SDRs, nearly half were able to complete therapy. Patient and provider education should focus on differentiating severe reactions where 3HP should be stopped from minor symptoms that will resolve. Clinical Trials Registration. NCT01582711.

Immunology↗

Alignment of the CLAS12 central hybrid tracker with a Kalman Filter

Several factors can contribute to the difficulty of aligning the sensors of tracking detectors, including a large number of modules, multiple types of detector technologies, and non-linear strip patterns on the sensors. All three of these factors apply to the CLAS12 CVT, which is a hybrid detector consisting of planar silicon sensors with non-parallel strips, and cylindrical micromegas sensors with longitudinal and arc-shaped strips located within a 5 T superconducting solenoid. To align this detector, we used the Kalman Alignment Algorithm, which accounts for correlations between the alignment parameters without requiring the time-consuming inversion of large matrices. This is the first time that this algorithm has been adapted for use with hybrid technologies, non-parallel strips, and curved sensors. We present the results for the first alignment of the CLAS12 CVT using straight tracks from cosmic rays and from a target with the magnetic field turned off. After running this procedure, we achieved alignment at the level of 10 µm, and the widths of the residual spectra were greatly reduced. These results attest to the flexibility of this algorithm and its applicability to future use in the CLAS12 CVT and other hybrid or curved trackers, such as those proposed for the future Electron-Ion Collider.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Transcriptional activation of EGFR by HOXB5 and its role in breast cancer cell invasion

Highlights: • HOXB5 regulates EGFR expression at the transcriptional level. • HOXB5-induced EGFR leads to propagation of downstream signal. • HOXB5-driven invasiveness is largely dependent on EGFR up-regulation. • High co-expression of HOXB5 and EGFR show poor prognosis. HOX genes are transcription factors that play important roles in body patterning and many cellular processes during embryonic, fetal, and adult development. Given their important function in normal tissues, it is reasonable to assume that abnormal expression of HOX genes in adults could lead to serious diseases such as cancer. Our previous study reported HOXB5 to be significantly up-regulated in breast cancer, and its expression was found to be associated with tumor cell proliferation and invasion. Furthermore, the epidermal growth factor receptor (EGFR), a cellular tyrosine kinase that plays an important role in breast cancer progression, was found significantly up-regulated by HOXB5 in ER-positive breast cancer cells. In the present study, we demonstrated that HOXB5 regulates EGFR expression at the transcriptional level by directly binding to its promoter region and promotes phosphorylation of EGFR as well as its downstream effectors. Patients with ER-positive breast cancer, having high co-expression of HOXB5 and EGFR, had poor prognosis than those with low expression. Knockdown studies validated a key role played by EGFR in the HOXB5-induced invasion of breast cancer cells. These results suggest that targeting EGFR could be an effective strategy to treat breast cancer in patients with high HOXB5 expression.

60 APPLIED LIFE SCIENCES↗