Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle dispersion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Production of Creep-Resistant FeCrAl-ODS

Four ODS FeCrAl alloys with base alloy composition Fe-16Cr-4Al-2Mo-0.2Y (wt.%) were mechanically alloyed with minor additions of CeO 2 and Y 2 O 3 additions and were successfully extruded into rectangular-shaped bars. Two oxide compositions were explored, which were designated NC with oxide addition of 0.5CeO 2 plus 0.2Yin solution of the base alloy powder and PC with additions of 0.5CeO 2 and 0.7Y 2 O 3 to elevate the O level. The microstructure of both alloys revealed by SEM and EBSD to consist of very small grains with sizes of ~450-520 nm and weak texture components. Sub-size tensile specimens fabricated from both alloys were tensile tested from room temperature to 800ºC. The results for both alloys from room temperature to 400ºC showed very high strengths, but low ductilities, especially uniform strain. From 500ºC to 800ºC, the strengths decreased rapidly, and the ductilities increased significantly. The reason for the rapid decreases in tensile strengths above 500ºC for both alloys is not clear, but will require advanced characterization techniques including atom probe tomography, to determine the size and number density of the nano-size oxide particles, and TEM/EFTEM, for investigating the dispersion of nano-size oxide particles on grain boundaries to assess the Zener grain boundary pinning effect, which will hinder grain coarsening at high temperatures that may enhance the Hall Petch strengthening mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assessing the technical aspects of ocean-alkalinity-enhancement approaches

Ocean alkalinity enhancement (OAE) is an emerging strategy that aims to mitigate climate change by increasing the alkalinity of seawater. This approach involves increasing the alkalinity of the ocean to enhance its capacity to absorb and store carbon dioxide (CO 2 ) from the atmosphere. This chapter presents an overview of the technical aspects associated with the full range of OAE methods being pursued and discusses implications for undertaking research on these approaches. Various methods have been developed to implement OAE, including the direct injection of alkaline liquid into the surface ocean; dispersal of alkaline particles from ships, platforms, or pipes; the addition of minerals to coastal environments; and the electrochemical removal of acid from seawater. Each method has its advantages and challenges, such as scalability, cost effectiveness, and potential environmental impacts. The choice of technique may depend on factors such as regional oceanographic conditions, alkalinity source availability, and engineering feasibility. This chapter considers electrochemical methods, the accelerated weathering of limestone, ocean liming, the creation of hydrated carbonates, and the addition of minerals to coastal environments. In each case, the technical aspects of the technologies are considered, and implications for best-practice research are drawn. The environmental and social impacts of OAE will likely depend on the specific technology and the local context in which it is deployed. Therefore, it is essential that the technical feasibility of OAE is undertaken in parallel with, and informed by, wider impact assessments. While OAE shows promise as a potential climate change mitigation strategy, it is essential to acknowledge its limitations and uncertainties. Further research and development are needed to understand the long-term effects, optimize techniques, and address potential unintended consequences. OAE should be viewed as complementary to extensive emission reductions, and its feasibility may be improved if it is operated using energy and supply chains with minimal CO 2 emissions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1971

Test and evaluation of Apollo 14 composite casting demonstration specimens and flight and control samples

The results of experiments 1, 2, and 10 of the Apollo 14 composite casting demonstration are discussed. The purpose of the demonstration, with regard to samples 1 and 2, was to obtain preliminary data on the liquid phase sintering process in a weightless environment. With regard to sample 10, the purpose was to obtain preliminary information on how to achieve uniform dispersion of dense particles on a metal matrix by employing shaking modes or forces in the system when the metal matrix is molten. Results of the demonstrations were interpreted in a quantitative and qualitative manner. For experiment 1 it was found that the tungsten particles were redistributed more uniformly in the flight sample than in the control sample. Experiment 2 results indicate that complete melting may not have occured and thus a high degree of significance cannot be associated with the qualitative results relating to particle redistribution data. The particle-matrix system of experiment 10 was found to be nonwetting.

Fabiniak, R. C.↗
NASA NTRS1974

Transportation of detrital materials on the lunar surface - Evidence from Apollo 15

The thickness frequency distribution of stratigraphic layers intersected by the Apollo 15 deep core suggests that the majority of impact events reworking the lunar soil are small and produce ejecta blankets with an average thickness of less than 1.5 cm. The energy frequency distribution of the meteorites producing the layers may be bimodal. The impacting meteorites produce both normal and reverse graded beds which appear to be the end products of two depositional mechanisms. First, the normally graded beds appear to be produced in base surges as escaping gases fluidize the flowing debris and larger particles move downward in response to Stokes Law. Second, if the gas loss from the base surge is excessive, the fluidization may cease and inertial grain flow dominates. In this situation, the beds are reverse graded as larger particles move under dispersive pressure to the region of minimum shear stress at the upper boundary of the base surge.

Lindsay, J. F.↗
NASA NTRS1976

Magellan - A balloon-borne collection technique for large cosmic dust particles

The paper describes a balloon-borne system for collecting large (50 to a few hundred micrometers in the major dimension) solid particles falling through the atmosphere at an altitude of about 30 km which are postulated to be fragments of larger cosmic particles or bodies which disintegrate on entering the atmosphere. The major component of the system is the collection surface - a funnel, 7.2 m in diameter, fabricated from mylar, 12 microns thick, and lightly coated with aluminum. Also described is the sample collector, which collects the particles gathered in the apex of the cone. Two successful flights of short duration using zero-pressure balloons have been achieved. Some examples of particles collected are shown. Mg, Al, Si, S, K, Ca, Ti, and Fe have been detected in these particles by energy dispersive X-ray analysis.

Wlochowicz, R.↗
NASA NTRS1978

Pitch angle dispersion of drifting energetic protons at synchronous orbit

The time of arrival at ATS 6 of substorm-associated energetic proton flux enhancements has been examined as a function of both energy and pitch angle by using electron-proton spectrometer data. The protons exhibit energy dispersion with the particles with the highest energy arriving first. This has generally been interpreted as evidence that these particles have gradient- and curvature-drifted to the spacecraft from an acceleration region on the nightside. In the evening quadrant, proton enhancements at 90 deg pitch angle arrived at the spacecraft prior to those at small pitch angles. However, on the dayside the increase occurs first at the smallest pitch angle (about 30 degrees). The difference between the arrival times of the 30 deg and 90 deg protons increases for more westward local times. For the highest energy range observed, drifting protons are rarely seen at large pitch angles. These observations place severe restrictions on the simple drift models. Since the pitch angle dependence of the particle drift velocity is a field geometric quantity, the observations require the modification of present magnetospheric magnetic field models. In particular, the models need to reproduce better the enhanced field observed on the dayside near synchronous orbit.

Walker, R. J.↗
NASA NTRS1979

Magnetic and metallurgical properties of directionally solidified eutectic Bi/MnBi composites - The effects of annealing

Eutectic Bi/MnBi (97.8 a/o Bi) samples have been plane-front directionally solidified. The resultant microstructures consist of elongated, aligned particles of MnBi dispersed in a Bi-matrix. Magnetization as a function of temperature (4.2 to 300 K) and applied field (up to 220 kG) has been used to evaluate solidification parameters and magnetic properties. At room temperature, in addition to the diamagnetic contribution of Bi, one finds a superposition of the ferromagnetic, low temperature (LTP) MnBi phase and paramagnetic phases. At cryogenic temperatures, one of the room temperature paramagnetic phases is ferromagnetic with an intrinsic coercivity of 120 kOe while the other remains paramagnetic for low fields and orders ferromagnetically at high fields in a complicated way. Annealing of as-grown samples was found to produce significant changes in magnetic properties. The origins of the paramagnetic phases and their relation to the mechanisms which control the coercive field of the hard magnetic LTP MnBi phase are discussed.

Pirich, R. G.↗
NASA NTRS1980

Dynamics of micrometeoroids

The spatial and orbital distributions of meteoroids of mass less than 10 to the -8 g are discussed. Pioneer 8 and 9, HEOS-2 and Helios 1 observations of the smallest meteoroids leaving the solar system in hyperbolic orbits due to radiation pressure (beta particles), intermediate mass particles arriving from the heliocentric spacecraft apex direction (alpha meteoroids) and the largest micrometeoroids observed with no preferred directionality (sporadic meteoroids) are reviewed, and evidence for the three groups of dynamically different micrometeoroids in lunar microcrater statistics is indicated. The collisional model of the origin of dust particles from the dispersion of sporadic meteoroids of cometary origin due to the Poynting-Robertson effect and collisions is then applied to account for the dynamics of the beta and alpha micrometeoroids.

Gruen, G.↗
NASA NTRS1984

Numerical experiments on galaxy clustering in open universes

Numerical studies were performed on the dynamical effects on the evolution of clumps, filaments, voids, and galaxy clusters by various final Omega values. The final Omega values examined ranged from 0.03-1, and attention was given to defining observations of superclusters which would aid in determining an actual value for Omega. The numerical trials consisted of n-body integration programs governed by the total expansion and final Omega value and included comparisons between results for open and closed universes. All runs started from the same initial conditions. The dispersion trajectories of particles and the final galactic cluster forms were found to be equivalent, regardless of the final Omega value. The possibility of deriving a value for Omega from velocity data on galaxies which have not yet joined clusters is discussed.

Miller, R. H.↗
NASA NTRS1987

Advanced powder metallurgy aluminum alloys via rapid solidification technology, phase 2

Marko's rapid solidification technology was applied to processing high strength aluminum alloys. Four classes of alloys, namely, Al-Li based (class 1), 2124 type (class 2), high temperature Al-Fe-Mo (class 3), and PM X7091 type (class 4) alloy, were produced as melt-spun ribbons. The ribbons were pulverized, cold compacted, hot-degassed, and consolidated through single or double stage extrusion. The mechanical properties of all four classes of alloys were measured at room and elevated temperatures and their microstructures were investigated optically and through electron microscopy. The microstructure of class 1 Al-Li-Mg alloy was predominantly unrecrystallized due to Zr addition. Yield strengths to the order of 50 Ksi were obtained, but tensile elongation in most cases remained below 2 percent. The class 2 alloys were modified composition of 2124 aluminum alloy, through addition of 0.6 weight percent Zr and 1 weight percent Ni. Nickel addition gave rise to a fine dispersion of intermetallic particles resisting coarsening during elevated temperature exposure. The class 2 alloy showed good combination of tensile strength and ductility and retained high strength after 1000 hour exposure at 177 C. The class 3 Al-Fe-Mo alloy showed high strength and good ductility both at room and high temperatures. The yield and tensile strength of class 4 alloy exceeded those of the commercial 7075 aluminum alloy.

Ray, Ranjan↗
NASA NTRS1988

Comet-solar wind interaction through ion-proton beam instability

The acceleration of cometary ions in the distant cometary tail by an electromagnetic beam instability, which is caused by the relative drift velocity between the cometary ions and solar protons is studied. The linear phase of the instability is analyzed by numerical evaluation of the Vlasov dispersion relation. A particle simulation is used to study the nonlinear phase of the instability. Right-hand polarized cyclotron waves are made unstable by the presence of ion beams. The cometary tail ions are accelerated mainly during the reduced-growth phase of the instability. The cyclotron waves cause momentum transfer from solar wind protons to cometary tail ions. The acceleration of cometary ions through the electromagnetic beam instability is found to be 500-5000 cm/s-squared.

Price, Channon P.↗
NASA NTRS1988

Characterization of microcomposite polyimide films

Thermally stable microcomposite polyimide films were prepared by the homogeneous incorporation of either a soluble metal salt or a metal complex into a poly(amide-acid)/N,N-dimethylacetamide solution. The thermal processing of films solvent cast onto glass substrates and cured in an appropriate atmosphere yields films containing not only a fairly uniform dispersion of submicrometer particles, but also a new surface layer of metal or metal oxide. These polymeric systems have been characterized using X-ray photoelectron spectroscopy, Auger electron spectroscopy with depth profiling via argon ion etching, transmission electron microscopy of ultramicrotomed cross-sections, scanning electron microscopy, elemental analysis, thermal analysis, and variable temperature electrical resistivity determinations. The data from these techniques were used cooperatively to develop a model for these microcomposite polyimide films.

Rancourt, J. D.↗
NASA NTRS1989

Mechanical properties of particulate composites based on a body-centered-cubic Mg-Li alloy containing boron

The effect of substituting the Mg metal in Mg-B composites by a Mg-14 wt pct Li solid solution on the ductility of the resulting composite was investigated using elastic modulus measurements on the P/M composite material prepared with a dispersion of B particles (in a vol pct range of 0-30) in a matrix of Mg-14 wt pct Li-1.5 wt pct Al. It was found that the elastic modulus of the composites increased rapidly with increasing boron, with specific stiffness values reaching about two times that of most structural materials. The values of the compression and tensile strengths increased significantly with boron additions. Good tensile ductility was achieved at the level of 10 vol pct B. However, at 20 vol pct B, the Mg-Li composite exhibited only limited tensile ductility (about 2 percent total elongation).

Whalen, R. T.↗
NASA NTRS1989

Processing and microstructure of melt spun NiAl alloys

The influence of various melt spinning parameters and the effect of consolidation on the microstructure of melt spun NiAl and NiAl + W alloys have been examined by optical and electron microscopy techniques. It was found that the addition of 0.5 at. pct W to NiAl results in a fine dispersion of W particles after melt spinning which effectively controls grain growth during annealing treatments or consolidation at temperatures between 1523 and 1723 K. Increased wheel speeds are effective at reducing both the ribbon thickness and grain size, such that proper choice of both composition and casting parameters can produce structures with grain sizes as small as 2 microns. Finally, fabrication of continuous fiber-reinforced composites which used pulverized ribbon as the matrix material was demonstrated.

Locci, I. E.↗
NASA NTRS1992

Nonadiabatic heating of the central plasma sheet at substorm onset

Heating events in the plasma sheet boundary layer and central plasma sheet are found to occur at the onset of expansive phase activity. The main effect is a dramatic increase in plasma temperature, coincident with a partial dipolarization of the magnetic field. Fluxes of energetic particles increase without dispersion during these events which occur at all radial distances up to 23 RE, the apogee of the ISEE spacecraft. A major difference between these heating events and those observed at geosynchronous distances lies in the heating mechanism which is nonadiabatic beyond 10 RE but may be adiabatic closer to earth. The energy required to account for the increase in plasma thermal energy is comparable with that required for Joule heating of the ionosphere. The plasma sheet must be considered as a major sink in the energy balance of a substorm. Lobe magnetic pressures during these events are estimated. Change in lobe pressure are generally not correlated with onsets or intensifications of expansive phase activity.

Huang, C. Y.↗