Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Effect of velocity-changing collisions on the output of a gas laser.

A theoretical model for the pressure dependence of the intensity of a gas laser is presented in which only velocity-changing collisions with foreign-gas atoms are included. This is a special case where the phase shifts are the same for the two atomic-laser levels or are so small that deflections are the dominant effect of collisions. A collision model for hard-sphere repulsive interactions is derived and the collision parameters, persistence of velocity and collision frequency, are assumed to be independent of velocity. The collision theory is applied to a third-order expansion of the polarization in powers of the cavity electric field (weak-signal theory). The resulting expression for the intensity shows strong pressure dependence. The collisions reduce the amount of saturation and the laser intensity increases with pressure in a characteristic fashion.

Borenstein, M.↗

Kinetic Study of the OH + Ethylene Reaction using Frequency Modulated Laser Absorption Spectroscopy

The pressure dependence of the OH + C 2 H 4 addition reaction has been investigated using frequency modulated laser absorption spectroscopy to monitor OH kinetics. Bimolecular rate coefficients for the title reaction are reported in argon bath gas at room temperature and total pressures ranging from 2–361Torr. The pressure dependent rate coefficients measured here agree well with the majority of published kinetic studies under similar conditions. Previous high-level ab initio calculations have identified a pre-reaction complex on the OH + C 2 H 4 potential energy surface. In conclusion, the influence of this complex on the OH + C 2 H 4 kinetics has been investigated using one-dimensional master equation analyses of the current and previous experimental measurements

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MESOSCALE MODELING OF DEFLAGRATION-INDUCED DECONSOLIDATION IN POLYMER-BONDED EXPLOSIVES

Initially undamaged polymer-bonded explosives can transition from conductive burning to more violent convective burning via rapid deconsolidation at higher pressures. The pressure-dependent infiltration of cracks and pores, i.e., damage, by product gases at the burn-front is a key step in the transition to convective burning. However, the relative influence of pre-existing damage and the evolution of deflagration-induced damage during the transition to convective burning is not well understood. The objective of this study is to investigate the role of microstructure and initial pressurization on deconsolidation. We performed simulations using the multi-physics hydrocode, ALE3D. HMX-Viton A served as our model explosive. A Prout-Tompkins chemical kinetic model, Vielle's Law pressure-dependent burning, Gruneisen equation-of-state, and simplified strength model were used for the HMX. The propensity for deconsolidation increased with increasing defect size and decreasing initial pressurization, as measured by the increase in burning surface area. These studies are important because they enable the development of continuum-scale damage models and the design of inherently safer explosives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure behavior of amorphous selenium from ultrasonic measurements and Raman spectroscopy

The high-pressure behavior of melt-quenched amorphous selenium (a-Se) has been investigated via ultrasonic measurements and Raman scattering at room temperature. The ultrasonic measurements were conducted on a-Se in a multi-anvil apparatus with two different sample assemblies at pressures of up to 4.5 and 4.8 GPa. We discovered that similar kinks occur in the slopes of the pressure dependence characteristics of the travel time and the sound velocity in both shear and longitudinal waves in the 2.0–2.5 GPa range. These kinks are independent of the sample assemblies, indicating an intrinsic transformation of the a-Se. Additionally, we deduced the pressure-volume relationship of a-Se from the sound velocity characteristics using the Birch–Murnaghan equation of state, and the results agreed well with those of previous reports. In situ high-pressure Raman scattering measurements of a-Se were conducted in a diamond anvil cell with an 830 nm excitation line up to a pressure of 4.3 GPa. We found that the characteristic band of a-Se at ∼250 cm{sup −1} experienced a smooth shift to a lower frequency with pressure, but a sharp slope change in the band intensity versus pressure occurred near 2.5 GPa. The results of X-ray diffraction and differential scanning calorimetry measurements indicate that the samples remain in their amorphous states after decompression. Thus, we proposed that the abnormal compression behavior of a-Se in the 2.0–2.5 GPa range can be attributed to pressure-induced local atomic reconfiguration, implying an amorphous-amorphous transition of the elementary selenium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polymer degradation rate control of hybrid rocket combustion

Polymer degradation to small fragments is treated as a rate controlling step in hybrid rocket combustion. Both numerical and approximate analytical solutions of the complete energy and polymer chain bond conservation equations for the condensed phase are obtained. Comparison with inert atmosphere data is very good. It is found that the intersect of curves of pyrolysis rate versus interface temperature for hybrid combustors, with the thermal degradation theory, falls at a pyrolysis rate very close to that for which a pressure dependence begins to be observable. Since simple thermal degradation cannot give sufficient depolymerization at higher pyrolysis rates, it is suggested that oxidative catalysis of the process occurs at the surface, giving a first order dependence on reactive species concentration at the wall. Estimates of the ratio of this activation energy and interface temperature are in agreement with best fit procedures for hybrid combustion data. Requisite active species concentrations and flux are shown to be compatible with turbulent transport. Pressure dependence of hybrid rocket fuel regression rate is thus shown to be describable in a consistent manner in terms of reactive species catalysis of polymer degradation.

Stickler, D. B.↗

High-pressure behavior of the ternary bismuth oxides Bi{sub 2}Al{sub 4}O{sub 9}, Bi{sub 2}Ga{sub 4}O{sub 9} and Bi{sub 2}Mn{sub 4}O{sub 10}

The high-pressure behavior of Bi{sub 2}Al{sub 4}O{sub 9}, Bi{sub 2}Mn{sub 4}O{sub 10} and Bi{sub 2}Ga{sub 4}O{sub 9} was investigated by in situ powder synchrotron X-ray diffraction. Pressures up to 35 GPa were generated using the diamond anvil cell technique. Complementary data of the pressure dependence of Bi{sub 2}Ga{sub 4}O{sub 9} were obtained by density functional theory-based model calculations. Bi{sub 2}Al{sub 4}O{sub 9} and Bi{sub 2}Mn{sub 4}O{sub 10} are structurally stable to the highest pressures obtained. In contrast, a reversible phase transition is observed in Bi{sub 2}Ga{sub 4}O{sub 9} at approximately 16 GPa. A fit of a 3rd-order Birch-Murnaghan equation of state to the p-V data results in V{sub 0}=356.93(9)A{sup 3}, B{sub 0}=122(2)GPa and B{sup '}=4.9(3) for Bi{sub 2}Al{sub 4}O{sub 9}; V{sub 0}=372.27(1)A{sup 3}, B{sub 0}=138(2)GPa and B{sup '}=4.2(2) for Bi{sub 2}Mn{sub 4}O{sub 10}; and V{sub 0}=388.63(3)A{sup 3}, B{sub 0}=102(8)GPa and B{sup '}=3.8(2) for Bi{sub 2}Ga{sub 4}O{sub 9}. The most compressible axis is the a axis for all the compounds. This behavior can be rationalized in terms of the inflexible polyhedra connections parallel to the b and c axes. - The influence of cation substitution on the high-pressure behavior of ternary bismuth oxides was investigated by powder X-ray diffraction using the diamond anvil cell technique. While Bi{sub 2}Ga{sub 4}O{sub 9} shows a reversible phase transition at approximately 16 GPa, Bi{sub 2}Al{sub 4}O{sub 9} and Bi{sub 2}Mn{sub 4}O{sub 10} are structurally stable up to 29 and 35 GPa, respectively. Complementary density functional theory-based model calculations were performed on Bi{sub 2}Ga{sub 4}O{sub 9}.

36 MATERIALS SCIENCE↗

Secondary channels in the thermal decomposition of monomethylhydrazine (CH 3 NHNH 2 )

Mass spectrometric observations in a very low pressure pyrolysis study of the decomposition of the prototypical rocket fuel monomethylhydrazine (MMH) indicated a dominant role for the molecular channels producing NH 3 and H 2 and their coproducts. In contrast, a recent ab initio transition state theory based master equation theoretical study indicated that simple N–N and C–N bond fissions dominate the kinetics. In this work, the possible role of molecular decomposition channels in MMH is explored further through additional investigations of the potential energy surface. These investigations consider the role of triplet channels, of roaming radical channels, and of some previously unexplored pathways for molecular decomposition. New ab initio transition state theory based master equation calculations provide revised predictions for the temperature and pressure dependence of the MMH decomposition kinetics that are in excellent agreement with recent shock tube measurements. These calculations continue to suggest only a very limited contribution from the molecular elimination channels. A roaming pathway is suggested to provide the dominant route for direct formation of ammonia. The possible role of secondary abstraction reactions in the very-low-pressure pyrolysis experiments is briefly discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large deformation and gas retention during cookoff of a plastic bonded explosive (PBX 9407)

Here, we have used several configurations of the Sandia Instrumented Thermal Ignition (SITI) experiment to develop a pressure-dependent, four-step ignition model for a plastic bonded explosive (PBX 9407) consisting of 94 wt.% RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), and a 6 wt.% VCTFE binder (vinyl chloride/chlorotrifluoroethylene copolymer). The four steps include desorption of water, decomposition of RDX to form equilibrium products, pressure-dependent decomposition of RDX forming equilibrium products, and decomposition of the binder to form hydrogen chloride and a nonvolatile residue (NVR). We address drying, binder decomposition, and decomposition of the RDX component from the pristine state through the melt and into ignition. We used Latin Hypercube Sampling (LHS) of the parameters to determine the sensitivity of the model to variation in the parameters. We also successfully validated the model using one-dimensional time-to-explosion (ODTX and P-ODTX) data from a different laboratory. Our SITI test matrix included 1) different densities ranging from 0.7 to 1.63 g/cm 3 , 2) free gas volumes ranging from 1.2 to 38 cm 3 , and 3) boundary temperatures ranging from 170 to 190 °C. We measured internal temperatures using embedded thermocouples at various radial locations as well as pressure using tubing that was connected from the free gas volume (ullage) to a pressure gauge. We also measured gas flow from our vented experiments. A borescope was included to obtain in situ video during some SITI experiments. We observed significant changes in the explosive volume prior to ignition. Our model, in conjunction with data observations, imply that internal accumulation of decomposition gases in high density PBX 9407 (90% of the theoretical maximum density) can contribute to significant strain whether or not the experiment is vented or sealed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous softening of yield strength in tantalum at high pressures

The pressure dependence of the yield strength of tantalum was investigated experimentally up to 101 GPa at room temperature using a diamond anvil cell. A yield strength softening is observed between 52 and 84 GPa, whereas a normal trend is observed below 52 GPa and above 84 GPa. The onset pressure of the softening is in agreement with previous results obtained by the pressure gradient method and shock wave experiments. This unusual strength softening in tantalum is not related with structural transformation, preferred orientation, or material damage. Our measurements indicate that microscopic deviatoric strain is the major reason for the observed strength softening in tantalum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxidation of Cu 2 O(111) by NO 2 : An Ambient Pressure X-ray Photoelectron Spectroscopy Study

With NO x persisting as a problematic pollutant, understanding the interactions and reactivity of NO x species at atmospherically relevant pressures with surfaces remains essential. Synchrotron-based ambient pressure x-ray photoelectron spectroscopy (APXPS) and near-edge x-ray absorption spectroscopy fine structure (NEXAFS) were used to investigate the interactions of NO2 with a Cu 2 O(111) surface. The NEXAFS data reveals a pressure dependence of the oxidation of the Cu 2 O surface to CuO by NO 2 . APXPS results show NO 2 chemi- and physisorption on the Cu 2 O surface and decomposition to NO and O, or to N and O, with the amount of the species also being pressure dependent. Finally, the combination of the two spectroscopic techniques shows a comprehensive picture of NO 2 adsorption with implications for catalysis, gas sensing, and gas filtration materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monazite-type SrCr O 4 under compression

We report a high-pressure study of monoclinic monazite-type SrCrO 4 up to 26 GPa. Therein we combined x-ray diffraction, Raman, and optical-absorption measurements with ab initio calculations, to find a pressure-induced structural phase transition of SrCrO 4 near 8-9 GPa. Evidence of a second phase transition was observed at 10-13 GPa. The crystal structures of the high-pressure phases were assigned to the tetragonal scheelite-type and monoclinic AgMnO 4 -type structures. Both transitions produce drastic changes in the electronic band gap and phonon spectrum of SrCrO 4 . We determined the pressure evolution of the band gap for the low- and high-pressure phases as well as the frequencies and pressure dependencies of the Raman-active modes. In all three phases most Raman modes harden under compression, however the presence of low-frequency modes which gradually soften is also detected. In monazite-type SrCrO 4 , the band gap blueshifts under compression, but the transition to the scheelite phase causes an abrupt decrease of the band gap in SrCrO 4 . Calculations showed good agreement with experiments and were used to better understand the experimental results. From x-ray-diffraction studies and calculations we determined the pressure dependence of the unit-cell parameters of the different phases and their ambient-temperature equations of state. The results are compared with the high-pressure behavior of other monazites, in particular PbCrO 4 . A comparison of the high-pressure behavior of the electronic properties of SrCrO 4 (SrWO 4 ) and PbCrO 4 (PbWO 4 ) will also be made. Lastly, the possible occurrence of a third structural phase transition is discussed.

36 MATERIALS SCIENCE↗

Acoustic properties, elasticity, and equation of state of glycerol under pressure

Herein we employed high-pressure Brillouin scattering to study the pressure dependencies of acoustic modes of glycerol up to 14 GPa at 300 K. We observed longitudinal acoustic velocities and transverse acoustic velocities for the first time from 5 to 14 GPa. The results allow the determination of a complete set of elastic properties and an accurate determination of the pressure–volume (P–V) equation of state (EOS). EOS parameters, K 0 = 14.9 ± 1.8 GPa and K' 0 = 5.6 ± 0.5, were determined from fits to the data from ambient pressure to 14 GPa. Direct volume measurements of the P–V EOS are consistent with those determined by Brillouin scattering. A deviation from a Cauchy-like relationship for elastic properties was observed, and the pressure dependencies of the photoelastic constants and relaxation times were documented from 5 to 14 GPa. These results have broad implications for glass-forming liquids, viscoelastic theory, and mode coupling theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations of Two Heavily Confined PBX 9502 Cook-off Experiments.

Finite element models of two cook-off experiments were constructed using the Aria code.These experiments provided thermocouple measurements that were used as boundary conditions to carry out finite element (FE) simulations and comparisons of the FE thermal response with internal temperature measurements in the PBX 9502. These FE models contain a pressure dependent PBX 9502 thermal decomposition model developed by Hobbs’ et al.. Comparisons of the FE results and the experiments are presented. These comparisons assess the predictive capabilities of Hobbs’ model under the experimental conditions. Limiting cases of the PBX 9502 decomposition model are considered. Two parameterizations associated with the pressure dependency of the PBX 9502 decomposition model were carried out to fit the experiments using internal temperature measurements. Two inverse heat conduction problems were implemented to estimate temperatures as functions of time at locations on the outer surface of the PBX 9502. Thermocouple conduction error studies were carried out to assess the comparisons of the FE model thermal response with the experiments.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Polarization of the light from the 3P(1)-2S(1) transition in proton beam excited helium

Measurements of the polarization of the light from the 3 1p-2 1s transition in proton beam excited Helium have shown both a proton beam energy and Helium target gas pressure dependence. Results for the linear polarization fraction range from +2.6% at 100 keV proton energy to -5.5% at 450 keV. The zero crossover occurs at approximately 225 keV. This is in good agreement with other experimental work in the field, but in poor agreement with theoretical predictions. Measurements at He target gas pressures as low as .01 mtorr show that the linear polarization fraction is still pressure dependent at .01 mtorr.

Weinhous, M. S.↗

The Dynamics of Ions on Phased Radio-frequency Carpets in High Pressure Gases and Application for Barium Tagging in Xenon Gas Time Projection Chambers

Radio-frequency (RF) carpets with ultra-fine pitches are examined for ion transport in gases at atmospheric pressures and above. We develop new analytic and computational methods for modeling RF ion transport at densities where dynamics are strongly influenced by buffer gas collisions. An analytic description of levitating and sweeping forces from phased arrays is obtained, then thermodynamic and kinetic principles are used to calculate ion loss rates in the presence of collisions. This methodology is validated against detailed microscopic SIMION simulations. We then explore a parameter space of special interest for neutrinoless double beta decay experiments: transport of barium ions in xenon at pressures from 1 to 10 bar. Our computations account for molecular ion formation and pressure dependent mobility as well as finite temperature effects. We discuss the challenges associated with achieving suitable operating conditions, which lie beyond the capabilities of existing devices, using presently available or near-future manufacturing techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Some considerations on the water polymorphism and the liquid-liquid transition by the density behavior in the liquid phase

The bulk liquid water density data (ρ) are studied in a very large temperature pressure range including also the glass phases. A thorough analysis of their isobars, together with the suggestions of recent thermodynamical studies, gives evidence of two crossovers at T* and P* above which the hydrogen bond interaction is unable to arrange the tetrahedral network that is at the basis of the liquid polymorphism giving rise to the low density liquid (LDL). The curvatures of these isobars, as a function of T, are completely different: concave below P* (where maxima are) and convex above. In both the cases, a continuity between liquid and glass is observed with P* as the border of the density evolution toward the two different polymorphic glasses (low and high density amorphous). The experimental data of the densities of these two glasses also show a markedly different pressure dependence. Here, on the basis of these observations in bulk water and by considering a recent study on the growth of the LDL phase, by decreasing temperature, we discuss the water liquid-liquid transition and evaluate the isothermal compressibility inside the deep supercooled regime. Such a quantity shows an additional maximum that is pressure dependent that under ambient conditions agrees with a recent X-ray experiment. In particular, the present analysis suggests the presence of a liquid-liquid critical point located at about 180 MPa and 197 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗