Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Imaging Power Losses in CdSeTe Solar Cells

Much of the research on CdSeTe photovoltaics is focused on improving the open-circuit voltage (V oc ) of the solar cell. But solar cells operate at the maximum power point (MPP) rather than at V oc . The recombination processes at MPP may be different than those at V oc , and increasing the power output at MPP is the key to advancing efficiency. Here, we introduce a camera-based PL imaging system that enables power loss analysis under operating conditions and across cm-sized areas covering multiple cells. The instrument is demonstrated with CdSeTe devices having efficiencies greater than 19%. An implied current density versus implied voltage (iJV) curve can be produced at each pixel with <20 µm resolution. We find that regions with high implied open circuit voltage are often those with low implied fill factor, showing that voltage loss analysis at open circuit is not sufficient to understand power losses under operating conditions. Measurement of JV curves as a function of irradiance can also be performed in the system, which allows series resistance-free pseudo JV (pJV) curves to be produced. Comparison of pJV to measured JV and iJV curves allows further analysis of the operational losses, pointing the way to higher efficiency.

14 SOLAR ENERGY↗
DOE OSTI2026

A Stochastic Quasi-Newton Method in the Absence of Common Random Numbers

We present Q-SASS, a quasi-Newton method for unconstrained stochastic optimization that does not rely on common random numbers. Most existing quasi-Newton approaches leverage common random numbers to construct second-order updates. However, motivated by challenges in variational quantum algorithms—where such coordination is not possible—we consider the setting in which function values and gradients are accessible only through noisy probabilistic zeroth- and first-order oracles, and no common random numbers can be exploited. We derive high-probability tail bounds on the iteration complexity of our algorithm for nonconvex, convex, and strongly convex (more generally, those satisfying the PL condition) objective functions. Finally, we demonstrate the empirical benefits of our quasi-Newton updating scheme on both synthetic and quantum chemistry problems.

Complexity bound↗
DOE OSTI2020

Interface structures of inclined ZnO thin film on (0 1 1)-MgO substrate with bulk-like optical properties

Combining different phase structure materials with unique properties to design novel devices plays a significant role in the development of modern electronics. Here, we explore the characteristics of this type of complex interface and epitaxy structures based on the coupling between hexagonal ZnO film and cubic MgO substrate. The ZnO film was prepared by the molecular beam epitaxy technique on the MgO (0 1 1) substrate. The analysis results from the in situ reflection high energy electron diffraction patterns, X-ray diffraction (XRD)-pole figures and high resolution transmission electron microscopy images demonstrate that the film exhibits two-fold symmetry domains with a growth direction deviated from c-axis at about 31º along the [0 1 0] MgO or [0 $\bar{1}$ 0] MgO azimuth. Despite the intertwined diffusion from Zn and Mg atoms in the interface, which is the possible origin of a blue shift of about 0.083 eV in the Photoluminescence (PL) spectrum, the inclined film shows a full width at half maximum value that is close to the reported value from the high quality film. Finally, this work hopefully provides useful insights to the design and exploration of the novel optoelectronic devices that involve the integration of materials with different structure and different properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Investigation of GaAs surface treatments for ZnSe growth by molecular beam epitaxy without a buffer layer

Atomically clean and smooth surfaces are critical prerequisite for the epitaxial regrowth of dissimilar semiconductors. Using ZnSe/GaAs as a model system, epitaxial regrowth without a buffer layer after thermal cleaning with various As-fluxes, atomic Ga flux, and atomic hydrogen treatments to the GaAs substrates and the surfaces were investigated in this work via in-situ Auger electron spectroscopy (AES). The ZnSe epilayers grown on the pre-treated GaAs surfaces without a buffer layer were characterized by X-ray diffraction (XRD), photoluminescence (PL) and atomic force microscopy (AFM) to evaluate the effectiveness of the surface treatment methods. It was found that a high quality ZnSe layer can be achieved by atomic hydrogen surface treatment at 300°C without requiring GaAs buffer layer growth, which reveals a path for epitaxy growth avoiding high temperature treatments.

42 ENGINEERING↗
DOE OSTI2021

A bifunctional zeolitic porous liquid with incompatible Lewis pairs for antagonistic cascade catalysis

The emergence of porous liquids (PLs) opened opportunities to form unique antagonistic systems capable of fulfilling cascade reactions promoted by incompatible active sites in one pot, which is a long-term challenging subject in catalysis. Herein, unique bifunctional type III PL-based systems were facilely fabricated via assembly of zeolite nanosheets with ionic liquids. Rational structural design afforded PLs that feature high zeolite concentration, stable dispersion after 2 years, abundant cavity distribution, and involvement of antagonistic groups (acid and base sites) in separated and active form via steric hindrance control and electronic repulsion regulation. These unique properties worked cooperatively to fulfill the cascade deacetalization-Knoevenagel/Aldol condensation in one pot with superior catalytic efficiency outperforming the traditional systems. The key to success lies in the formation of bifunctional composites, transformation of zeolite from heterogeneous to homogeneous via surface modification, as well as rapid mass transfer ensured by the rigid porous architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface functionality and formation mechanisms of carbon and graphene quantum dots

Graphene quantum dots (GQDs) and Carbon dots (C-dots) have been widely studied in recent years due to their structural and optoelectrical properties. These properties have prompted the exploration of the role of these carbon-based materials in many potential applications. This includes solar cells, photodetectors, bioimaging, sensors, batteries and drug delivery. These properties and applications of GQDs and C-dots are highly dependent on their size, shape and surface functionality. In this work, GQDs and C-dots mixtures have been synthesized by an inexpensive wet chemical method by varying the synthesis temperature from 85°, 100° to 115 °C. The surface functionalities of the synthesized carbon-based materials were investigated by several analytical methods. We discovered a higher degree of oxidation at higher temperatures. The mechanism of formation of different sized GQDs and C-dots with different functionalities have been explained with the help of XPS and NEXAFS analysis. The influence of size and surface functionalities on the optical properties of these nanomaterials is analyzed by UV–Vis and PL spectroscopic techniques. Furthermore, this study demonstrates that physicochemical properties of GQDs and C-dots can be controlled by changing the synthesis temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A study of damage-free in-situ etching of GaN in metalorganic chemical vapor deposition (MOCVD) by tertiarybutylchloride (TBCl)

This paper reports a study of the effect of NH 3 flow rate and reactor temperature on the tertiarybutylchloride (TBCl) etching of patterned GaN-on-sapphire templates. It is found that a reduced NH 3 flow rate and an elevated reactor temperature can eliminate islands or dots on the surface, while at the same time, enhance the etching around dislocations. TBCl etching was also performed on planar bulk GaN templates with much lower dislocation density. We find an atomically flat and layer-by-layer etching behavior within the region free of dislocations. Surface kinetics analysis reveals a short diffusion length of etching products. Room-temperature photoluminescence (PL) and x-ray photoelectron spectroscopy (XPS) measurements confirm that TBCl etching is capable of removing the damage and impurities induced by plasma etching without introducing additional damage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A novel optical sensor for Pb 2+ detection based on in-situ formation of Ruddlesden-Popper phase (C 4 H 9 NH 3 ) 2 PbBr 4 perovskite

On account of the concentration sensitive photoluminescence (PL) property of the lead-based Ruddlesden-Popper (RP) phase perovskite material, a novel sensing mechanism for highly selective Pb 2+ detection based on the in-situ formation of highly emissive luminescence structure matrix (C 4 H 9 NH 3 ) 2 PbBr 4 has been demonstrated. The sensor exhibits high sensitivity and selectivity for detecting Pb 2+ in complex metal cations mixture solution. This research reports a novel type of sensor mechanism based on the in-situ formation of luminescent lead-based RP phase perovskite. Here, it paves the way for developing highly selective optical sensors for detecting heavy metal cations via their corresponding luminescence structure matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Phase transition in two-dimensional monolayer (1L)-molybdenum disulfide induced by atomic S-basal plane gliding via synchrotron X-ray monochromatic beam radiation for superior electronic performance

Here, in this work, we report a novel approach to reduce the channel resistance by inducing a phase transition behavior from 2H to 1T in a monolayer MoS 2 (1L-MoS 2 ) by a synchrotron X-ray monochromatic beam (mono-beam) radiation. The effects of the biphase structure by the mono-beam on the 1L-MoS2 film were investigated using Raman spectra, photoluminescence (PL) spectra, scanning tunneling microscopy, and scanning tunneling spectroscopy, respectively. Through material characterization, we identified that the lateral sliding of S-vacancies along the S-plane in the 1L-MoS 2 is the key reason for the origin of unidirectional phase transition. The precise phase engineering triggered by the mono-beam radiation process allows the realization of field-effect transistors (FET) with 2X improvement in mobility toward a high on/off ratio (~10 8 ) and a near-ideal subthreshold swing of ~88 mV per decade. The validity of the phase engineering could be further extended for its application as a memory device, exhibiting a gate tunable conduction modulation behavior and a high resistance ratio of ~10 2 at a gate bias of 5 V with endurance of ~100 cycles. Furthermore, an artificial neural network using the synaptic weight update with accuracy of ~93 % was achieved.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Design of enhanced porous organic cage solubility in Type 2 porous liquids

Decreasing cost of technologies for direct air capture of carbon can be achieved through the design of new materials with high CO 2 selectivity that can be incorporated into existing industrial processes. An emerging class of materials for these applications are porous liquids (PLs). PLs are mixtures of porous hosts and solvents with intrinsic porosity due to steric exclusion of solvent from inside the porous host. It is currently unknown how solvent -porous host interactions affect porous host solubility in the bulk solvent. Here, in this study, density functional theory simulations were used to investigate interactions between nine solvents and a CC13 porous organic cage (POC). Calculations identified that solvent molecules were the most stable when placed either inside the CC13 POC or in the pore window compared to interfacial binding sites. Structural changes to the CC13 POC correlated with reported experimental solubilities, including expansion of the CC13 POC with solvent molecule infiltration and expansion or contraction of the pore window. Based on these results, new PL design guidelines should include compositions with (1) high concentrations of POCs with flexible cage structures that can expand when solvated and (2) solvent molecule-POC combinations that contract the pore window during solvent molecule-host binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

CO 2 adsorption mechanisms at the ZIF-8 interface in a Type 3 porous liquid

Porous liquids (PLs) are an attractive material for gas separation and carbon sequestration due to their permanent internal porosity and high adsorption capacity. PLs that contain zeolitic imidazole frameworks (ZIFs), such as ZIF-8, form PLs through exclusion of aqueous solvents from the framework pore due to its hydrophobicity. The gas adsorption sites in ZIF-8 based PLs are historically unknown; gas molecules could be captured in the ZIF-8 pore or adsorb at the ZIF-8 interface. To address this question, ab initio molecular dynamics was used to predict CO 2 binding sites in a PL composed of a ZIF-8 particle solvated in a water, ethylene glycol, and 2-methylimidazole solvent system. Further, the results show that CO 2 energetically prefers to reside inside the ZIF-8 pore aperture due to strong van der Waals interactions with the terminal imidazoles. However, the CO 2 binding site can be blocked by larger solvent molecules that have greater adsorption interactions. CO 2 molecules were unable to diffuse into the ZIF-8 pore, with CO 2 adsorption occurring due to binding with the ZIF-8 surface. Therefore, future design of ZIF-based PLs for enhanced CO 2 adsorption should be based on the strength of gas binding at the solvated particle surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Impact of acetic acid exposure on metal contact degradation of different crystalline silicon solar cell technologies

Degradation due to acetic acid in photovoltaic (PV) modules has been a commonly observed phenomenon for both damp-heat exposure and outdoor operations. Acetic acid is a degradation byproduct of ethylene-vinyl acetate (EVA), a common module encapsulant. To address this issue, robust metallization pastes and cell technologies are being developed. However, it is important to assess how these technologies perform in an acetic acid environment and withstand degradation before they are implemented in the solar market. In this work, we investigate the impact of acetic acid exposure on four different cell groups: monofacial passivated emitter and rear contact (PERC) cells with advanced telluride-based front contact pastes, bifacial PERC cells with novel aluminum rear contact pastes, bifacial tunnel oxide passivated contacts (TOPCon) cells, and silicon heterojunction (SHJ) cells. These cells were exposed to acetic acid for different time increments. The recombination losses were characterized by Suns-VOC, and multi-variate regression analysis of intensity-dependent photoluminescence (PL) images with Griddler AI. Resistive losses were tracked with the transmission line method (TLM). Samples showing severe performance degradation were selected for further materials characterization to understand the root cause. Top-down and cross-sectional scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) were performed to investigate the change in materials properties. Our study shows that the front contacts of the bifacial TOPCon cells and monofacial PERC cells were significantly affected by acetic acid exposure. Here, the SHJ cells were found to be the most stable.

14 SOLAR ENERGY↗
DOE OSTI2020

K 2 CuX 3 (X = Cl, Br): All-Inorganic Lead-Free Blue Emitters with Near-Unity Photoluminescence Quantum Yield

Recently, copper(I) halides have been gaining increased attention as highly luminescent nontoxic alternatives to lead halide perovskites for optoelectronic applications. In this paper, we report preparation of blue emitting, lead free, all-inorganic halides K 2 CuX 3 (X = Cl, Br) through five synthetic methods including traditional solid-state and solution methods. The photoluminescence (PL) emission spectra of K 2 CuCl 3 and K 2 CuBr 3 exhibit narrow peaks centered at 392 and 388 nm with full widths at half-maximum (fwhm) values of ~54 nm. The visible bright blue emission is corroborated by the remarkably high photoluminescence quantum yield (PLQY) values up to ~97%. Furthermore, radioluminescence measurements on K 2 CuCl 3 yield a bright peak at 404 nm under irradiation with X-rays at 200 kVp and 20 mA, which is optimal for use with PMTs and Si photomultipliers, suggesting a strong potential of this family for radiation detection applications. Based on our combined experimental and computational investigations, the origin of the efficient luminescence in K 2 CuX 3 is attributed to the high stability self-trapped excitons (STE) formed in the one-dimensional anionic ∞ 1 [CuX 3 ] 2– chains. Advantageously, K 2 CuX 3 demonstrate improved air- and photostability compared to the previously reported copper(I) halides. The discovery of highly efficient and high stability light emitters based on earth-abundant copper(I) halides paves the way for their potential practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ferroelectric and Charge Transport Properties in Strain-Engineered Two-Dimensional Lead Iodide Perovskites

Transitions from three-dimensional (3D) hybrid organic–inorganic perovskite (HOIP) structures to lower dimensions including 2D and quasi-2D structures open a new range of functional properties in these materials systems. Yet, the performance of solar cells made from 2D HOIP is below that of the 3D compositions due to the higher band-gap energy, low carrier concentration, and anisotropy in charge transport. Controlling ferroelectricity in 2D HOIPs is considered to be a powerful strategy to drive the spatial separation of photogenerated charge carriers to improve the photovoltaic action in this class of HOIPs. Here, we explore the strain-dependent ferroelectricity and charge carrier properties in strain-engineered 2D-layered HOIPs utilizing advanced scanning probe microscopy (SPM) techniques. Band excitation-piezoresponse force microscopy (BE-PFM) and contact Kelvin probe force microscopy (cKPFM) reveal ferroelectric domains and switchable dynamics with significantly low switching voltages in the low-strain film. Photoluminescence (PL) spectroscopy shows strain-dependent optical properties and a noncentrosymmetric structure with strong second-harmonic generation (SHG) peaks in the low-strain film. In addition, KPFM results demonstrate a higher surface potential in the low-strain films, while the photovoltage and local current are the highest on the high-strain film. Furthermore, our study demonstrates the critical role of strain engineering on the electromechanical and charge carrier dynamics in 2D HOIPs, which is important for development of 2D HOIP devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Two-Dimensional Copper Iodide-Based Inorganic–Organic Hybrid Semiconductors: Synthesis, Structures, and Optical and Transport Properties

A group of copper iodide-based hybrid semiconductors with the general formula of 2D-CuI(L) 0.5 (L = organic ligands) are synthesized and structurally characterized. All compounds are two-dimensional (2D) networks made of one-dimensional (1D) copper iodide staircase chains that are interconnected by bidentate nitrogen-containing ligands. Results from optical absorption and emission experiments and density functional theory (DFT) calculations reveal that their photoluminescence (PL) can be systematically tuned by adjusting the lowest unoccupied molecular orbital (LUMO) energies of the organic ligands. Charge carrier transport measurements were carried out for the first time on single crystals of selected 2D-CuI(L) 0.5 structures, and the results show that they possess p-type conductivity with a Hall mobility of ~1 cm 2 V -1 s -1 for 2D-CuI(pm) 0.5 and 0.13 cm 2 V -1 s -1 for 2D-CuI(pz) 0.5 , respectively. These values are comparable to or higher than the mobilities of typical highly luminescent organic semiconductors. Finally, this work suggests that robust, high-dimensional copper iodide hybrid semiconductors are promising candidates to be considered as a new type of emissive layer for light-emitting diode (LED) devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Novel 3D Cubic Topology in Hybrid Lead Halides with a Symmetric Aromatic Triammonium Exhibiting Water Stability

The limitations of three-dimensional (3D) perovskites are related to their narrow structural tunability of the organic cations and their moisture sensitivity. Herein, we report a new family of 3D cubic hybrid metal halides (T-Et 6 ) 3 Pb 11 X 31 (X = I, Br), where T is 1,3,5-tris-(4-aminophenyl)benzene. The materials are synthesized through an in situ N-alkylation of T and an efficient one-step solvothermal reaction containing ethanol, initiating a tunable synthetic avenue for the acquisition of structurally complex hybrid halides with luminophores. (T-Et 6 ) 3 Pb 11 X 31 consist of an unprecedented Ia3̅ framework of [Pb 11 X 31 ] 9– one-dimensional (1D) chains embedded with (T-Et 6 ) 3+ cations, affording an overall 3D topology. Here, the constituent [Pb 11 X 31 ] 9– chains include exclusively octahedral lead halide units with clusters of face- and edge-sharing connectivity, giving rise to weak broad emission centered at ~660 nm observed at 78 K. (T-Et 6 ) 3 Pb 11 I 31 demonstrates water stability for at least 7 days. Synthesis through ambient pressure results in tunable structural variations of zero-dimensional (0D) structures rendering T 7 Pb 3 Br 27 ·DMF and T 2 Sn 3 Br 18 ·4H 2 O·0.5Br 2 , both of which feature blue PL emission at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of the Precursor Chemistry on the Crystallization of Triple Cation Mixed Halide Perovskites

Triple cation, mixed halide perovskite compositions have been reported to be more thermally stable, exhibit fewer phase impurities, and show higher power conversion efficiency and better reproducibility than single cation perovskites. In this work, we explain the formation of Cs0.05FA0.81MA0.14Pb(I0.85Br0.15)3 via a multimodal in situ study combining structural information from synchrotron grazing-incidence wide-angle X-ray scattering (GIWAXS) and optical properties from photoluminescence (PL) spectroscopy with density functional theory calculations (DFT). The focus here is on the effects of the solvent and antisolvent during crystallization. The predominantly used solvents N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and the antisolvent chlorobenzene (CB) as well as the solvent-antisolvent-precursor interactions are investigated. Given the high elemental complexity and mutual interdependencies between solvent, antisolvent, and perovskite precursors, we found significant differences in the crystallization pathways. DMF-pure precursors show the formation of the DMF-containing intermediate phase and the nucleation of compositionally distinct perovskite phases, while when DMSO is added, only crystalline α- and δ-phases were found. In addition, the presence of DMSO helps the formation of α-perovskite. Coordination energy and bond order (BO) calculations support our experimental findings. Dripping of CB induces nucleation at room temperature, slows the α-phase formation rate, and appears to reduce the nucleation radius. These findings provide novel insights into solvent, antisolvent, and perovskite precursor interactions and their formation pathways. The complexity of interactions between solvents and reagents highlights the importance of understanding these effects to further improve the reproducibility and optimize processing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Revealing the Three-Dimensional Orientation and Interplay between Plasmons and Interband Transitions for Single Gold Bipyramids by Photoluminescence Excitation Pattern Imaging

Gold bipyramids (AuBPs) attract significant attention due to the large enhancement of the electric field around their sharp tips and well-defined tunability of their plasmon resonances. Excitation patterns of single AuBPs are recorded using raster-scanning confocal microscopy combined with radially and azimuthally polarized laser beams. Photoluminescence spectra (PL) and excitation patterns of the same AuBP are acquired with three different excitation wavelengths. Here, the isotropic excitation patterns suggest that the AuBPs are mainly excited by interband transitions with 488/530 nm radiation, while excitation patterns created with a 633 nm laser exhibit a double lobed shape that indicates a single dipole excitation process associated with the longitudinal plasmon resonance mode. We are able to determine the three-dimensional orientation of single AuBPs nonperturbatively by comparing experimental patterns with theoretical simulations. The asymmetric patterns show that the AuBPs are lying on the substrate with an out-of-plane tilt angle of around 10° to 15°.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗