Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Discharge dynamics of pin-to-plate dielectric barrier discharge at atmospheric pressure

The discharge dynamics of pin-to-plate dielectric barrier discharge was studied in atmospheric helium at 20 kHz. The discharge was predominately ignited in positive half cycle of applied voltage with sinusoidal waveform. The temporal evolution of the discharge was investigated vertically along the discharge gap and radically on the dielectric surface by time resolved imaging. It is found that a discharge column with a diameter of 2 mm was ignited above the pin electrode and expanded toward a plate electrode. On the dielectric surface with space charge accumulation, plasma disk in terms of plasma ring was formed with radius up to 25 mm. The expansion velocity of plasma ring can reach a hypersonic speed of 3.0 km/s. The ionization wave due to electron diffusion is considered to be the mechanism for plasma ring formation and dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effective grain pinning revealed by nanoscale electron tomography

The grain pinning behavior of TiC particles in a rapidly solidified MRE-Fe-B (MRE = Nd + Y + Dy) nanocrystalline hard magnet was studied using electron tomography (ET). The 3D reconstruction overcomes the inherent 2D nature of conventional transmission electronmicroscopy (TEM) to reveal how this grain boundary phase controls the nanoscale structure in the rapidly solidified alloy. The 3D reconstruction was performed on the optimally annealed alloy (750 C/15 min) with hard magnetic properties of M{sub r} = 8.1 kGs, H{sub c} = 6.2 kOe, (BH){sub max} = 11.2 MGOe measured at 300 k. The sampled volume, 425 x 425 x 92.5 nm{sup 3}, contains more than 20 grains of the RE2-14-1 phase and more than 70 TiC nanoparticles. The TiC grains shapes depend on their sizes and locations along the grain boundary. Most of the TiC particles are oval or short rod like shapes and range from 5 nm to 10 nm. TiC particles less than 10 nm formed between adjacent 2-14-1 grains, while the largest ones formed at triple junctions. There are -1.7 x 10{sup 8} TiC particles within a 1 mm{sup 3} volume in the alloy. This accounts for the strong grain boundary pinning effect, which limits grain growth during annealing.

36 MATERIALS SCIENCE↗

Diagnosis of the ion density in two discharge modes generated in atmospheric pressure argon with pin-to-plate dielectric barrier geometry

In this study, the ion densities of an ac dielectric barrier discharge (DBD) (that is, a pin-to-plate DBD) as a function of the applied frequency in argon have been studied by means of the plasma radiation. The pin-to-plate DBD shows the characteristic of radiation oscillations with a low-frequency wave hidden in a high-frequency wave to form a mosaic structure, which reveals the coexistence of two discharge modes in the ac barrier discharge, i.e., the streamer mode and the corona mode. According to the oscillation frequencies, the ion densities are calculated. The results show that the ion density in streamer discharge is higher than that in corona discharge for about 1-2 magnitude orders.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Origin of 90 Degrees Domain Wall Pinning in Pb(Zr0.2Ti0.8)O3 Heteroepitaxial Thin Films

We describe a transmission-electron-microscopy study of the ferroelectric domains in an epitaxial Pb(Zr{sub 0.2}Ti{sub 0.8})O{sub 3} (PZT) film grown on La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/SrTiO{sub 3}(001). We directly observe the pinning of 90{sup o} domain walls by pairs of misfit dislocations, respectively, with Burgers vectors a [100] and a [001]. Model calculations based on the elastic theory confirm our finding that, in addition to the depolarization field surrounding the dislocation, the strain field of misfit dislocation-pairs plays the primary role in the formation and pinning of a domains.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Microstructure study of pinning sites of highly (0001) textured Sm(Co,Cu){sub 5} thin films grown on Ru underlayer

In this paper, microstructure study of pinning sites of highly (0001) textured Sm(Co,Cu){sub 5} thin films was presented. Various types of pinning sites were identified, such as voids, grain/matrix boundaries (or crystalline/amorphous boundaries), grain boundaries between crystalline grains, and composition inhomogeneity in grains. One key finding of TEM elemental mapping was that Cu atoms were rich in the inner part of Sm(Co,Cu){sub 5} grains (defined by Sm and Co concentrations), instead of the outer part of grains, such as grain boundaries. Cu served as an alloying element in Sm(Co,Cu){sub 5} grains, not as a doping element to form Cu-rich grain boundaries. A model of Sm(Co,Cu){sub 5} films with lateral graded anisotropy due to composition/crystallization variation can explain the huge difference between the H{sub C} and H{sub K}.

36 MATERIALS SCIENCE↗

Enhancement of magnetoresistance using CoFe/Ru/CoFe synthetic ferrimagnetic pinned layer in BiFeO{sub 3} based spin-valves

SrTiO{sub 3} (100) sub/BiFeO{sub 3}/CoFe/Ru/CoFe/Cu/CoFe/Ta structure was prepared by a combination of chemical solution deposition and sputtering method, and followed by a systematical investigation for the structural, magnetic and magnetoresistance properties at room temperature (RT) as a function of CoFe and Ru thicknesses. It was revealed that introduction of synthetic CoFe/Ru/CoFe as a pinning layer increased the giant magentoresistance (MR) ratio to 8.3% at RT. This enhancement of MR ratio might be attributed to (i) the increase of pinning field, and (ii) suppression of the influence of the surface roughness of BiFeO{sub 3} by inserting the synthetic CoFe/Ru/CoFe layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reliability studies on Si PIN photodiodes under Co-60 gamma radiation

Silicon PIN photodiodes were fabricated with 250 nm SiO{sub 2} antireflective coating (ARC). The changes in the electrical characteristics, capacitance-voltage characteristics and spectral response after gamma irradiation are systematically studied to estimate the radiation tolerance up to 10 Mrad. The different characteristics studied in this investigation demonstrate that Si PIN photodiodes are suitable for high radiation environment.

36 MATERIALS SCIENCE↗

On the roles of Bi{sub 2}Sr{sub 2}CuO{sub x} intergrowths in Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub x}/Ag round wires: c-axis transport and magnetic flux pinning

Despite progress in the performance of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub x} (Bi2212)/Ag multifilamentary round wires, understanding the impact of microstructural defects on multiple length scales on electrical transport remains a significant challenge. Many recent studies have focused on porosity, but porosity is not the only factor in determining J{sub c}. The primary impurity in partial-melt processed multifilamentary Bi2212 wires is Bi{sub 2}Sr{sub 2}CuO{sub x} (Bi2201), which forms as mesoscopic grains and nanoscopic intergrowths. Previously, we showed the destructive effect of Bi2201 grains on transport. Here, we relate scanning transmission electron microscopy results to the Bi2212 coherence length, anisotropic magnetization behavior, and magnetic-field dependent transport to study c-axis transport and the effects of Bi2201 intergrowths on magnetic flux pinning. We show that wide Bi2201 intergrowths are barrier to c-axis transport within Bi2212 grains, whereas narrow (half- and full-cell) Bi2201 intergrowths are not detrimental to c-axis transport and are likely magnetic flux pinning centers. These results have significant impact on the understanding of Bi2212/Bi2201 systems and provide important physical insight towards future improvements in devices based upon wires, film, and junctions.

36 MATERIALS SCIENCE↗

The pinning effect in quantum dots

The pinning effect is studied in a Gaussian quantum dot using the improved Wigner-Brillouin perturbation theory (IWBPT) in the presence of electron-phonon interaction. The electron ground state plus one phonon state is degenerate with the electron in the first excited state. The electron-phonon interaction lifts the degeneracy and the first excited states get pinned to the ground state plus one phonon state as we increase the confinement frequency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reliable reduction of Fermi-level pinning at atomically matched metal/Ge interfaces by sulfur treatment

This study demonstrates that by using a sulfur (S) treatment on the Ge surface, a reduction in Fermi level pinning can reproducibly be achieved at atomically matched metal/Ge(111) interfaces. The Schottky barrier height for p-type Ge can be controlled by changing the metal work function despite the metal/Ge junctions. The results indicate that the combination of atomic-arrangement matching and S treatment can remove extrinsic factors influencing Fermi level pinning at metal/Ge interfaces.

36 MATERIALS SCIENCE↗

Alleviation of fermi-level pinning effect at metal/germanium interface by the insertion of graphene layers

In this paper, we report the alleviation of the Fermi-level pinning on metal/n-germanium (Ge) contact by the insertion of multiple layers of single-layer graphene (SLG) at the metal/n-Ge interface. A decrease in the Schottky barrier height with an increase in the number of inserted SLG layers was observed, which supports the contention that Fermi-level pinning at metal/n-Ge contact originates from the metal-induced gap states at the metal/n-Ge interface. The modulation of Schottky barrier height by varying the number of inserted SLG layers (m) can bring about the use of Ge as the next-generation complementary metal-oxide-semiconductor material. Furthermore, the inserted SLG layers can be used as the tunnel barrier for spin injection into Ge substrate for spin-based transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indium phosphide-based monolithically integrated PIN waveguide photodiode readout for resonant cantilever sensors

An integrated photodiode displacement readout scheme for a microelectromechanical cantilever waveguide resonator sensing platform is presented. III-V semiconductors are used to enable the monolithic integration of passive waveguides with active optical components. This work builds upon previously demonstrated results by measuring the displacement of cantilever waveguide resonators with on-chip waveguide PIN photodiodes. The on-chip integration of the readout provides an additional 70% improvement in mass sensitivity compared to off-chip photodetector designs due to measurement stability and minimized coupling loss. In addition to increased measurement stability, reduced packaging complexity is achieved due to the simplicity of the readout design. We have fabricated cantilever waveguides with integrated photodetectors and experimentally characterized these cantilever sensors with monolithically integrated PIN photodiodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi level pinning induced electrostatic fields and band bending at organic heterojunctions

The energy level alignment at interfaces between organic semiconductors is of direct relevance to understand charge carrier generation and recombination in organic electronic devices. Commonly, work function changes observed upon interface formation are interpreted as interface dipoles. In this study, using ultraviolet and X-ray photoelectron spectroscopy, complemented by electrostatic calculations, we find a huge work function decrease of up to 1.4 eV at the C{sub 60} (bottom layer)/zinc phthalocyanine (ZnPc, top layer) interface prepared on a molybdenum trioxide (MoO{sub 3}) substrate. However, detailed measurements of the energy level shifts and electrostatic calculations reveal that no interface dipole occurs. Instead, upon ZnPc deposition, a linear electrostatic potential gradient is generated across the C{sub 60} layer due to Fermi level pinning of ZnPc on the high work function C{sub 60}/MoO{sub 3} substrate, and associated band-bending within the ZnPc layer. This finding is generally of importance for understanding organic heterojunctions when Fermi level pinning is involved, as induced electrostatic fields alter the energy level alignment significantly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of ion density in an atmospheric pressure argon with pin-to-plate dielectric barrier discharge by resonance of plasma radiation

The measurements of the ion densities in the atmospheric AC barrier corona argon discharge are carried out by receiving and analyzing the frequencies of the electromagnetic radiation emitted from the plasma. An auxiliary excitation source composed of a pin-to-pin discharge system is introduced to excite the oscillations of the main discharge. To analyze the resonance mechanism, a complemented model based on a one-dimensional description of forced vibrations is given. Calculations indicate that Ar{sub 2}{sup +} is the dominant ion (∼89% in number density). By analyzing resonance frequencies, the ion densities of Ar{sub 2}{sup +} are in the order of 10{sup 19}∼10{sup 20}m{sup −3} and increase slowly as the applied voltage increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Elimination of a spiral wave pinned at an obstacle by a train of plane waves: Effect of diffusion between obstacles and surrounding media

In excitable media such as cardiac tissue and Belousov-Zhabotinsky reaction medium, spiral waves tend to anchor (pin) to local heterogeneities. In general, such pinned waves are difficult to eliminate and may progress to spatio-temporal chaos. Heterogeneities can be classified as either the absence or presence of diffusive interaction with the surrounding medium. In this study, we investigated the difference in the unpinning of spiral waves from obstacles with and without diffusive interaction, and found a profound difference. The pacing period required for unpinning at fixed obstacle size is larger in case of diffusive obstacles. Further, we deduced a generic theoretical framework that can predict the minimal unpinning period. Our results explain the difference in pacing periods between for the obstacles with and without diffusive interaction, and the difference is interpreted in terms of the local decrease of spiral wave velocity close to the obstacle boundary caused in the case of diffusive interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrically controlled pinning of Dzyaloshinskii-Moriya domain walls

We propose a method to all-electrically control a domain-wall position in a ferromagnetic nanowire with Dzyaloshinskii-Moriya interaction. The strength of this interaction can be controlled by an external electric field, which in turn allows a fine tuning of the pinning potential of a spin-spiral domain wall. It allows to create more mobile pinning sites and can also be advantageous for ultra-low power electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thin epitaxial silicon PIN detectors for thermal neutron detection with improved gamma (γ) discrimination

In order to improve the gamma discrimination capability for thermal neutron measurements using silicon PIN detectors, a novel approach of use of thin epitaxial silicon PIN detectors was investigated. Thin epitaxial silicon detectors with thickness of 15 µm were developed and their performance was tested with thermal neutrons using {sup 10}B converter. The performance of this detector was compared with the performance of a 300 µm silicon detector. The results of experiments presented in this paper indicate that thin epitaxial silicon detectors can significantly improve γ discrimination for thermal neutron measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dewetting and spreading transitions for active matter on random pinning substrates

Here, we show that sterically interacting self-propelled disks in the presence of random pinning substrates exhibit transitions among a variety of different states. In particular, from a phase separated cluster state, the disks can spread out and homogeneously cover the substrate in what can be viewed as an example of an active matter wetting transition. We map the location of this transition as a function of activity, disk density, and substrate strength, and we also identify other phases including a cluster state, coexistence between a cluster and a labyrinth wetted phase, and a pinned liquid. Convenient measures of these phases include the cluster size, which dips at the wetting-dewetting transition, and the fraction of sixfold coordinated particles, which drops when dewetting occurs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗