Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PI control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Computed Tomography Support for Microgravity Materials Science Experiments

The accurate measurement of density in both liquid and solid samples is of considerable interest to Principal Investigators with materials science experiments slated for the ISS. The work to be described is an innovative application of a conventional industrial nondestructive evaluation instrument. Traditional applications of industrial computed tomography (CT) rely on reconstructing cross sections of large structures to provide two-dimensional planar views which can identify defects such as porosity, or other material anomalies. This has been done on microgravity materials science experiments to check the integrity of ampoule-cartridge assemblies for safety purposes. With a substantially monoenergetic flux, as can be obtained with a radioactive cobalt source, there will be a direct correlation between absorption and density. Under such conditions it then becomes possible to make accurate measurements of density throughout a sample, and even when the sample itself is enclosed within a furnace and a safety required cartridge. Such a system has been installed at Kennedy Space Center (KSC) and is available to PIs to examine samples before and after flight. The CT system is being used to provide density information for two purposes. Firstly, the determination of density changes from liquid to solid is vital information to the PI for purposes of modeling the solidification behavior of his sample, and to engineers who have to design containment ampoules and must allow for shrinkage and other volume changes that may occur during processing. While such information can be obtained by pycnometric measurements, the possibility of using a furnace installed on the CT system enables one to examine potentially dangerous materials having high vapor pressures, while not needing visible access to the material. In addition, uniform temperature can readily be obtained, and the system can be controlled to ramp up, hold, and ramp down while collecting data over a wide range of parameters automatically. Results of initial tests on low melting point elements such as gallium, indium and tin will be presented, and the intent is to proceed to compounds such as InSb, HgCdTe and CdTe. Alloys such as Pb-Sb (PI - Poirier, U AZ) and Cu-Al (PI - Trivedi, Ames Lab.), which are the subjects of flight experiments, will also be examined. The second application is the conversion of measured density values directly to composition. This was successfully done with the mercury cadmium telluride alloys grown on the second and fourth United States Microgravity Payload (USMP-2 and USMP-4) missions by Lehoczky. CdTe values along the length of the boules were obtained at KSC prior to cutting the sample, and could have been obtained prior to its removal from the cartridge and ampoule. Examples of the data obtained will be shown. It is anticipated that several of the materials science PIs will avail themselves of the technique described, initially for determining densities prior to flight, and then to acquire early quantitative data on the compositional variation within their samples.

Gillies, Donald C.↗

Large-N summation of chiral logs for generalized parton distributions

We demonstrate that in the region of Bjorken x{sub Bj}{approx}m{sub {pi}}{sup 2}/(4{pi}F{sub {pi}}){sup 2} and/or x{sub Bj}{approx}|t|/(4{pi}F{sub {pi}}){sup 2} the standard {chi}PT for the pion generalized parton distributions (GPDs) fails and one must perform all order resummation of {chi}PT. We perform such resummation in the large-N limit of the O(N+1) extension of the chiral theory. Explicit resummation allows us to reveal novel phenomena--the form of the leading chiral correction to pion parton distribution functions (PDFs) and GPDs depends on the small x asymptotic of the pion PDFs. In particular, if the pion PDF in the chiral limit has the Regge-like small x behavior q(x){approx}1/x{sup {omega}}, the leading large impact parameter (b{sub perpendicular}{yields}{infinity}) asymptotics of the quark distribution in the transverse plane has the form (m{sub {pi}}=0) q(x,b{sub perpendicular}){approx}1/x{sup {omega}}ln{sup {omega}}(b{sub perpendicular}{sup 2}/b{sub perpendicular}{sup 2(1+{omega})}. This result is model independent and it is controlled completely by the all order resummed {chi}PT developed in this paper. This asymptotic interweaves with small-x behavior of usual PDFs, hence it depends on the scale, at which the corresponding PDF is defined. This is a new and interesting result in which the chiral expansion meets the QCD evolution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Final Technical Report Grant No. DE-FG02-97ER45653 Lance E. De Long, Principal Investigator, University of Kentucky Period of Performance: 09/01/97 to 05/14/15

Prior to 1997, the PI had studied the unusual upper critical magnetic field phase boundaries of several novel or exotic types of superconductors, including charge density wave materials such as NbSe 2 , organic superconductors such as κ-(ET) 2 Cu[N(CN) 2 ]Br, high-temperature oxide superconductors such as (Ba,K)BiO 3 and the cuprates, heavy fermion superconductors such as U 6 Fe, UBe 13 , URu 2 Si 2 and UPt 3 , and re-entrant Kondo alloys such as (La,Ce)Al 2 and ferromagnetic superconductors such as ErRh 4 B 4 . Most of these materials exhibited marked positive or negative curvature of H C2 (T) which could not be explained by traditional pair-breaking models. It became clear that many of these materials had very short coherence lengths that made quantized vortices highly mobile (depinned) near the phase boundary, and the fundamental, equilibrium H C2 (T) difficult to measure using finite field or current drives. These problems made the underlying physics obscure, and led to erroneous interpretations of experimental data in terms of models of exotic superconducting pairing mechanisms. Around 1995, these issues led the PI to take advantage of modern electron beam lithography techniques for patterning superconducting and ferromagnetic thin films on the nanoscale. Primarily due to strong magnetic shape anisotropy effects, EBL patterning has led to enhanced control of the spatial distribution and dynamics of topological defects such as domain walls and magnetic vortices, which can create serious energy dissipation and other limitations for modern devices. Moreover, finite size and interface effects also strongly alter phase transition temperatures and phase boundaries of superconducting and magnetic films, as well as introduce barriers to equilibration, enhanced fluctuations and alter magnetic relaxation. Geometrical frustration and spin ice behavior can also be systematically controlled in patterned film media. Film patterning thus provides an excellent tool for conducting highly-controlled, fundamental studies of cooperative phases and interactions in artificially structured condensed matter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Constraining Proton Lifetime in SO(10) with Stabilized Doublet-Triplet Splitting

We present a class of realistic unified models based on supersymmetric SO(10) wherein issues related to natural doublet-triplet (DT) splitting are fully resolved. Using a minimal set of low dimensional Higgs fields which includes a single adjoint, we show that the Dimopoulos-Wilzcek mechanism for DT splitting can be made stable in the presence of all higher order operators without having pseudo-Goldstone bosons and flat directions. The {mu} term of order TeV is found to be naturally induced. A Z{sub 2}-assisted anomalous U(1){sub A} gauge symmetry plays a crucial role in achieving these results. The threshold corrections to {alpha}{sub 3}(M{sub Z}), somewhat surprisingly, are found to be controlled by only a few effective parameters. This leads to a very predictive scenario for proton decay. As a novel feature, we find an interesting correlation between the d = 6 (p {yields} e{sup +}{pi}{sup 0}) and d = 5 (p {yields} {bar {nu}}K{sup +}) decay amplitudes which allows us to derive a constrained upper limit on the inverse rate of the e{sup +}{pi}{sup 0} mode. Our results show that both modes should be observed with an improvement in the current sensitivity by about a factor of five to ten.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Making the Grid "Smart" Through "Smart" Microgrids: Real-Time Power Management of Microgrids with Multiple Distributed Generation Sources Using Intelligent Control

In this Project we collaborated with two DOE National Laboratories, Pacific Northwest National Lab (PNNL) and Lawrence Berkeley National Lab (LBL). Dr. Hammerstrom of PNNL initially supported our project and was on the graduate committee of one of the Ph.D. students (graduated in 2014) who was supported by this project. He is also a committee member of a current graduate student of the PI who was supported by this project in the last two years (August 2014-July 2016). The graduate student is now supported be the Electrical and Computer Engineering (ECE) Department at Montana State University (MSU). Dr. Chris Marney of LBL provided actual load data, and the software WEBOPT developed at LBL for microgrid (MG) design for our project. NEC-Labs America, a private industry, also supported our project, providing expert support and modest financial support. We also used the software “HOMER,” originally developed at the National Renewable Energy Laboratory (NREL) and the most recent version made available to us by HOMER Energy, Inc., for MG (hybrid energy system) unit sizing. We compared the findings from WebOpt and HOMER and designed appropriately sized hybrid systems for our case studies. The objective of the project was to investigate real-time power management strategies for MGs using intelligent control, considering maximum feasible energy sustainability, reliability and efficiency while, minimizing cost and undesired environmental impact (emissions). Through analytic and simulation studies, we evaluated the suitability of several heuristic and artificial-intelligence (AI)-based optimization techniques that had potential for real-time MG power management, including genetic algorithms (GA), ant colony optimization (ACO), particle swarm optimization (PSO), and multi-agent systems (MAS), which is based on the negotiation of smart software-based agents. We found that PSO and MAS, in particular, distributed MAS, were more efficient and better suited for our work. We investigated the following: • Intelligent load control - demand response (DR) - for frequency stabilization in islanded MGs (partially supported by PNNL). • The impact of high penetration of solar photovoltaic (PV)-generated power at the distribution level (partially supported by PNNL). • The application of AI approaches to renewable (wind, PV) power forecasting (proposed by the reviewers of our proposal). • Application of AI approaches and DR for real-time MG power management (partially supported by NEC Labs-America) • Application of DR in dealing with the variability of wind power • Real-time MG power management using DR and storage (partially supported by NEC Labs-America) • Application of DR in enhancing the performance of load-frequency controller • MAS-based whole-sale and retail power market design for smart grid A

24 POWER TRANSMISSION AND DISTRIBUTION↗

E→H mode transition density and power in two types of inductively coupled plasma configuration

E → H transition power and density were investigated at various argon pressures in inductively coupled plasma (ICP) in a cylindrical interlaid chamber. The transition power versus the pressure shows a minimum transition power at 4 Pa (ν/ω=1) for argon. Then the transition density hardly changes at low pressures (ν/ω≪1), but it increases clearly when argon pressure exceeds an appropriate value. In addition, both the transition power and transition density are lower in the re-entrant configuration of ICP compared with that in the cylindrical configuration of ICP. The result may be caused from the decrease of stochastic heating in the re-entrant configuration of ICP. This work is useful to understand E → H mode transition and control the transition points in real plasma processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gluon polarization in the nucleon

Gluons can contribute to the nucleon spin and may provide the part missing when only quark spins are taken into account. The gluon helicity distribution can be obtained from QCD fits or from direct measurements in experiments selecting processes sensitive to gluons. Recently several important measurements were completed and others are in progress in fixed target lepton nucleon scattering as well as in collider experiments with polarized protons. Asymmetries are obtained in processes with significant contributions from gluons such as in lepton nucleon scattering the production of D mesons and production of hadrons with high transverse momentum, and in polarized pp scattering the production of jets, {pi}{sup 0} mesons and direct photons. These results are interpreted in terms of universal gluon helicity distribution, using assumptions and approximations specific for each analysis. The complementarity of the approaches is very important in controlling systematic effects and in establishing the present conclusion and interpretation that the data show no signature of very high gluon polarization in the kinematic region of observations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cyber Security Audit and Attack Detection Toolkit

This goal of this project was to develop cyber security audit and attack detection tools for industrial control systems (ICS). Digital Bond developed and released a tool named Bandolier that audits ICS components commonly used in the energy sector against an optimal security configuration. The Portaledge Project developed a capability for the PI Historian, the most widely used Historian in the energy sector, to aggregate security events and detect cyber attacks.

97 MATHEMATICS AND COMPUTING↗

Simulation, Challenge Testing and Validation of Solutions for Residential and Commercial Occupancy Sensing/Counting and CO2 Sensing (Final Report)

Carbon dioxide sensors used for monitoring and control applications in buildings are known to be sensitive to long term drift and can be affected by variations in temperature, humidity, other gas interferents, pressure and other factors that cannot be corrected through the typical auto-calibration methods often embedded in the sensor electronics. This investigation was part of the Category D defined in the ARPA-E Saving Energy Nationwide in Structures With Occupancy Recognition (SENSOR) Financial Assistance Funding Opportunity Announcement No. DE-FOA-0001737, FFDA No. 81.135, January 18, 2017. The FOA defined target criteria for the evaluation of the Category C commercial CO2 sensors selected for review and development through the ARPA-E SENSOR program and charged the Iowa State Category D team with developing an evaluation methodology for Category C sensors in accordance with these criteria. As part of the work, the Iowa State team chose to engage the standards community in the development of the evaluation methodology. Standard development work in the D22.05 Indoor Air and D22.03 Ambient Atmospheres and Source Emissions subcommittees of ASTM International Committee D22 on Air Quality on the evaluation of low cost sensors and provision of guidance for using indoor carbon dioxide concentrations to evaluate indoor air quality and ventilation is of particular relevance to the Category D efforts. To date, three draft standards with specific input by the Iowa State Category D team have passed the subcommittee balloting stage and are being balloted in December 2022 and January 2023 in the main D22 committee. In addition to the aforementioned standards to which the PI was a contributing author, intellectual property developed in this project pertaining to “An Automated System for Evaluation of the Long Term Performance of Carbon Dioxide Sensors” and “An Automated Ground Truth System for Real-Time Reliability Assessment, Capture of Control Decisions and Energy Savings Measurements for Occupancy Recognition Systems and Other Applications” are the other major deliverables of the project. These standards and the developed intellectual property are expected to benefit the public in a number of ways stemming from their provision of means to benchmark the performance of carbon dioxide and other sensor systems. In particular, there is high interest in techniques to demonstrate the performance of low-cost carbon dioxide sensors which can be used for typical HVAC applications (e.g., demand controlled ventilation, outdoor and indoor air monitoring, estimation of occupancy, etc.).

42 ENGINEERING↗

Analysis of D{sup +{yields}}K{sup -{pi}+}e{sup +{nu}}{sub e} and D{sup +{yields}}K{sup -{pi}+{mu}+}+{nu}{sub {mu}}semileptonic decays

Using a large sample ({approx_equal}11800 events) of D{sup +{yields}}K{sup -{pi}+}e{sup +{nu}}{sub e} and D{sup +{yields}}K{sup -{pi}+{mu}+{nu}}{sub {mu}}decays collected by the CLEO-c detector running at the {psi}(3770), we measure the helicity basis form factors free from the assumptions of spectroscopic pole dominance and provide new, accurate measurements of the absolute branching fractions for D{sup +{yields}}K*{sup 0}e{sup +{nu}}{sub e} and D{sup +{yields}}K*{sup 0{mu}+{nu}}{sub {mu}}decays. We find branching fractions which are consistent with previous world averages. Our measured helicity basis form factors are consistent with the spectroscopic pole dominance predictions for the three main helicity basis form factors describing D{sup +{yields}}K*{sup 0}l{sup +{nu}}{sub l} decay. The ability to analyze D{sup +{yields}}K{sup -{pi}+{mu}+{nu}}{sub {mu}}allows us to make the first nonparametric measurements of the mass-suppressed form factor. Our result is inconsistent with existing lattice QCD calculations. Finally, we measure the form factor that controls nonresonant s-wave interference with the D{sup +{yields}}K*{sup 0}l{sup +{nu}}{sub l} amplitude and search for evidence of possible additional nonresonant d- or f-wave interference with the K*{sup 0}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NCSU Black Carbon (SP2) Data

NCSU SP2 Data Data Level b1: QC checks applied to measurements Data Format: CSV Description: See "instrument description Site: Houston, TX; Tracking Aerosol Convection interactions ExpeRiment (HOU) Location: Houston, TX; AMF1 (main site for TRACER) Facility Code: M1 Category: Aerosol Properties Data Type: PI Data Source Instrument/Data: Single Particle Soot Photometer (SP2) Start Date: 2022-06-01 End Date: 2022-09-27 Contact PI: Markus Petters (mdpetter@ncsu.edu) Funding Source: DOE ASR award US Department of Energy, Office of Science, Biological and Environment Research (grant no. DE-SC 0021074) Instrument description The SP2 was located in the temperature-controlled trailer adjacent to the NCSU Flux Tower to observe refractory black carbon (rBC) number concentration and mixing states of black carbon. The sample line brought aerosol inside the trailer at 4.5 L min-1, where it was distributed between 3 CPCs (TSI 3776c, Dc ~ 2.5 nm, TSI 3771, Dc ~10nm, and TSI 3772, Dc ~40 nm) with different size cuts, a printed particle optical spectrometer (POPS), and SP2. Please contact mdpetter@ncsu.edu for further information.

54 ENVIRONMENTAL SCIENCES↗

Scalable synthesis and characterization of cobalt sodium tartrate nanowires with adjustable diameters

Cobalt sodium tartrate nanowires are synthesized by a simple hydrothermal method using ethanol-water mixed solvents. The smooth wires are on average 30 {mu}m long. Their diameters are narrowly size distributed with a controllable average in the range from 80 to 250 nm. Interestingly, after the initial two hours, the diameter decreases with further reaction time. The tartrate anions act as coordination ligands with all six oxygen atoms participating in the coordination. The Co{sup 2+} and Na{sup +} ions chelate with the O atoms from the carboxylate and hydroxyl groups in the tartrate ligands. The ethanol participates in the formation of pi bonds. The cobalt is divalent while the sodium is monovalent in their tartrates. The respective crystal structures of these metal tartrates are incompatible, and the wires are therefore amorphous. The influence of the reaction time, sodium tartrate concentration, pH value, and the ethanol water ratio are studied in detail. - Graphical abstract: Cobalt sodium tartrate nanowires with smooth surfaces are synthesized hydrothermally. Their narrowly distributed diameters decrease with reaction time after initial two hours and are controllable from 80 to 250 nm. Highlights: > Cobalt sodium tartrate nanowires are synthesized by a simple hydrothermal route. > Nanowires are smooth, amorphous, and up to 30 {mu}m long. > Diameters of the wires are controllable; they decrease with the reaction time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanotubes, Plates, and Needles: Pathway-Dependent Self-Assembly of Computationally Designed Peptides

Computationally designed peptides form desired antiparallel, tetrameric coiled-coil bundles that hierarchically assemble into a variety of well-controlled nanostructures depending on aqueous solution conditions. The bundles selectively self-assemble into different structures: nanotubes, platelets, or needle-like structures at solution pH values of 4.5, 7, and 10, respectively. The self-assembly produces hollow tubes or elongated needle-like structures at pH conditions associated with charged bundles (pH 4.5 or 10); at neutral pH, near the pI of the bundle, a plate-like self-assembled structure forms. Transmission electron microscopy and small-angle X-ray scattering show the nanotubes to be uniform with a tube diameter of ~13 nm and lengths of up to several μm, yielding aspect ratios >1000. Combining the measured nanostructure geometry with the apparent charged states of the constituent amino acids, a tilted-bundle packing model is proposed for the formation of the homogeneous nanotubes. Here, this work demonstrates the successful use of assembly pathway control for the construction of nanostructures with diverse, well-structured morphologies associated with the folding and self-association of a single type of molecule.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of atrazine on hepatic metabolism and endocrine homeostasis in rainbow trout (Oncorhynchus mykiss)

The herbicide atrazine (ATZ) is one of the most widely used pesticides in the world and is now under scrutiny for its alleged capacity to disrupt the endocrine system. Exhibiting negligible interaction with the estrogen receptor (ER), ATZ's mode of action remains to be elucidated. ATZ may act as an inducer of the enzyme aromatase, which converts androgens to estrogens, although other mechanisms should also be taken into consideration such as impairment of hepatic metabolism. Therefore we administered juvenile rainbow trout (Oncorhynchus mykiss) a dose of either 2 or 200 {mu}g ATZ/kg, or of carrier control phosphate buffered saline (PBS) and we measured plasma concentrations of testosterone (T), 17beta-estradiol (E2) and vitellogenin (Vtg) 6 days after exposure. Simultaneously we analyzed hepatic gene expression of cytochrome P450 (CYP) 1A and pi-class glutathione S-transferase (GST-P), and catalase (CAT) activity. Although sex steroid levels showed no significant alterations, we found a dose-dependent increase in Vtg and a concomitant decrease in CYP1A. There was no effect of ATZ on GST-P mRNA levels but GST-P was positively correlated with CYP1A. Also, CYP1A was negatively correlated with liver CAT and E2, and varied with T concentrations in a hormetic manner. The results showed that ATZ can alter hepatic metabolism, induce estrogenic effects and oxidative stress in vivo, and that these effects are linked.

60 APPLIED LIFE SCIENCES↗

X-ray absorption spectroscopy of biomimetic dye molecules for solar cells

Dye-sensitized solar cells are potentially inexpensive alternatives to traditional semiconductor solar cells. In order to optimize dyes for solar cells we systematically investigate the electronic structure of a variety of porphyrins and phthalocyanines. As a biological model system we use the heme group in cytochrome c which plays a role in biological charge transfer processes. X-ray absorption spectroscopy of the N 1s and C 1s edges reveals the unoccupied molecular orbitals and the orientation of the molecules in thin films. The transition metal 2p edges reflect the oxidation state of the central metal atom, its spin state, and the ligand field of the surrounding N atoms. The latter allows tuning of the energy position of the lowest unoccupied orbital by several tenths of an eV by tailoring the molecules and their deposition. Fe and Mn containing phthalocyanines oxidize easily from +2 to +3 in air and require vacuum deposition for obtaining a reproducible oxidation state. Chlorinated porphyrins, on the other hand, are reduced from +3 to +2 during vacuum deposition at elevated temperatures. These findings stress the importance of controlled thin film deposition for obtaining photovoltaic devices with an optimum match between the energy levels of the dye and those of the donor and acceptor electrodes, together with a molecular orientation for optimal overlap between the {pi} orbitals in the direction of the carrier transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic interferometer measurements of Berry and Aharonov-Anandan phases for isolated spins S>(1/2) nonlinearly coupled to external fields

In a recent paper we have studied the peculiar features of the Berry and Aharonov-Anandan geometric phases for isolated spins S{>=}1. We have assumed that they are submitted to a dipole and quadrupole coupling to external E and B fields with the mild restriction E{center_dot}B=0. This implies discrete symmetries leading to remarkable simplifications of the geometry and algebra involved. The aim of the present work is to describe realistic proposals, within the realm of atomic physics, for the verification of some of our most significant theoretical predictions. There are several challenges to be overcome. For alkali-metal atoms, most commonly used in atomic interferometers, the only practical way to generate quadrupole coupling, with a strength comparable to the dipole one, is the ac Stark effect induced by a nearly resonant light beam. One then has to face the instability of the 'dressed' atom hyperfine (hf) level, a candidate for our isolated spin. One deleterious effect is the apparition of an imaginary part in the quadrupole to dipole coupling strength ratio, {lambda}. Fortunately we have found a simple way to get rid of I({lambda}) by an appropriate detuning. We are left with an unstable isolated spin. This implies an upper bound to the quantum cycle duration T{sub c}. In the case of the Berry's phase, T{sub c} has a lower bound due to the necessity of keeping the nonadiabatic corrections below a predefined level. We have found a compromise in the case of the F=2,m=0 {sup 87}Rb ground-state hf level. This is our candidate for the measurement of the somewhat ''exotic'' Berry's phase acquired by the S=2,m=0 state at the end of a quantum cycle involving a rotation of {pi} of the E field--in practice, the linear polarization of the dressing beam --about the B field direction. We have found a way to implement, in a Ramsey-type interferometric measurement, the procedures aimed at controlling the nonadiabatic corrections, as described in detail in our previous theoretical paper. A numerical simulation of our experimental proposal shows that a 0.1% accurate determination of Berry's phase, free of nonadiabatic corrections, can be achieved. Measurements could also be considered for cold {sup 52}Cr chromium atoms with S=3, where values of {lambda}{approx_equal}1 can be obtained with an instability smaller than in the {sup 87}Rb case, due to a more favorable spectroscopic structure. The F=1,m=1 hf level of the {sup 87}Rb ground state offers the opportunity to extend the measurement of Aharonov-Anandan's phases beyond the case S=(1/2). We construct, using 'light shift', the Hamiltonian H{sub ||}(t) generating a closed circuit in the density-matrix space which satisfies at any time the 'parallel transport' condition, thus making the quantum cycle free from the adiabaticity condition. We also consider the case of half-integer spins (e.g., {sup 201}Hg, {sup 135}Ba, and {sup 137}Ba), with their own specific features. We show how the difference of Berry's phases for states S=(3/2) and S=(1/2), with m=(1/2), can be exploited to achieve a holonomic maximum entanglement of three qubits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rendezvous targeting

Revisions to be included in 'Space Shuttle Guidance, Navigation and Control Design Equations' are reported. Technical changes include: (1) a plane change maneuver was incorporated in the program's logic; (2) in the search for an apsidal crossing, program checks were included to update through intervals of pi in the case of near circular orbits or close proximity to an apsidal point; (3) following an astronaut overwrite of a Lambert maneuver, the state vector was updated to establish a new target vector for use in the powered flight routine; and (4) following the computation of each maneuver, the position vector of the primary vehicle was offset - to help compensate for the effects of the finite maneuver - prior to the update of the state vector to the next maneuver point. Input and output variables, detailed flow diagrams a functional flow diagram, and a description of equations are presented.

Tempelman, W. H.↗

Elevated temperature crack growth

It is necessary to relate the processes that control crack growth in the immediate vicinity of the crack tip to parameters that can be calculated from remote quantities, such as forces, stresses, or displacements. The most likely parameters appear to be certain path-independent (PI) integrals, several of which have already been proposed for application to high temperature inelastic problems. The ability of currently available PI-integrals to correlate fatigue crack propagation under conditions that simulate the engine combustor liner environment was determined. The utility of advanced fracture mechanics measurements will also be evaluated and determined during the course of the program.

Malik, S. N.↗