Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Low resistance contacts for shallow junction semiconductors

A method of enhancing the specific contact resistivity in InP semiconductor devices and improved devices produced thereby are disclosed. Low resistivity values are obtained by using gold ohmic contacts that contain small amounts of gallium or indium and by depositing a thin gold phosphide interlayer between the surface of the InP device and the ohmic contact. When both the thin interlayer and the gold-gallium or gold-indium contact metallizations are used, ultra low specific contact resistivities are achieved. Thermal stability with good contact resistivity is achieved by depositing a layer of refractory metal over the gold phosphide interlayer.

Fatemi, Navid S.↗

On the Properties of Isoparametric AlInGaAsP/InP Heterostructures

The effect of growth conditions on the structural perfection of AlInGaAsP/InP thin-film heterostructures is discussed. The key parameters determining the structural perfection and surface quality of thin AlInGaAsP epitaxial films grown on indium-phosphide substrates from the liquid phase in a temperature-gradient field are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure polymorphism of Fe[subscript 2]P and its implications for meteorites and Earth's core

Minerals with composition (Fe,Ni){sub 2}P, are rare, though important accessory phases in iron and chondritic meteorites. The occurrence of these minerals in meteorites is believed to originate either from the equilibrium condensation of protoplanetary materials in solar nebulae or from the later accretion and condensation processes in the cores of parent bodies. Fe-Ni phosphides are considered a possible candidate for a minor phase present in the Earth's core, and at least partially responsible for the observed density deficit with respect to pure iron. We report results of high-pressure high-temperature X-ray diffraction experiments with synthetic barringerite (Fe{sub 2}P) up to 40 GPa and 1400 K. A new phase transition to the Co{sub 2}Si-type structure has been found at 8.0 GPa, upon heating. The high-pressure phase can be metastably quenched to ambient conditions at room temperature, and then, if heated again, transforms back to barringerite, providing an important constraint on the thermodynamic history of meteorite.

58 GEOSCIENCES↗

Synthesis of luminescent core/shell α-Zn 3 P 2 /ZnS quantum dots

Metal chalcogenide nanoparticles offer vast control over their optoelectronic properties via size, shape, composition, and morphology which has led to their use across fields including optoelectronics, energy storage, and catalysis. While cadmium and lead-based nanocrystals are prevalent in applications, concerns over their toxicity have motivated researchers to explore alternate classes of nanomaterials based on environmentally benign metals such as zinc and tin. The goal of this research is to identify material systems that offer comparable performance to existing metal chalcogenide systems from abundant, recyclable, and environmentally benign materials. With band gaps that span the visible through the infrared, II–V direct band gap semiconductors such as tetragonal zinc phosphide (α-Zn 3 P 2 ) are promising candidates for optoelectronics. To date, syntheses of α-Zn 3 P 2 nanoparticles have been hindered because of the toxicity of zinc and phosphorus precursors, surface oxidation, and defect states leading to carrier trapping and low photoluminescence quantum yield. Here, we report a colloidal synthesis of quantum confined α-Zn 3 P 2 nanoparticles from common phosphorus precursor tris(trimethylsilyl)phosphine and environmentally benign zinc carboxylates. Shelling of the nanoparticles with zinc sulfide is shown as a method of preventing oxidation and improving the optical properties of the nanoparticles. These results show a route to stabilizing α-Zn 3 P 2 nanoparticles for optoelectronic device applications.

25 ENERGY STORAGE↗

A thermodynamic analysis of native point defect and dopant solubilities in zinc-blende III-V semiconductors

A thermodynamic model is used to analyze available experimental data relevant to point defects in the binary zinc-blende III-V compounds (Ga,In)-(P,As,Sb). The important point defects and their complexes in each of the materials are identified and included in the model. Essentially all of the available experimental data on dopant solubility, crystal density, and lattice parameter of melt and solution grown crystals and epilayers are reproduced by the model. It extends an earlier study [Hurle, J. Appl. Phys. 85, 6957 (1999)] devoted solely to GaAs. Values for the enthalpy and entropy of formation of both native and dopant related point defects are obtained by fitting to experimental data. In undoped material, vacancies, and interstitials on the Group V sublattice dominate in the vicinity of the melting point (MP) in both the phosphides and arsenides, whereas, in the antimonides, vacancies on both sublattices dominate. The calculated concentrations of the native point defects are used to construct the solidus curves of all the compounds. The charged native point defect concentrations at the MP in four of the six materials are significantly higher than their intrinsic carrier concentrations. Thus the usually assumed high temperature 'intrinsic' electroneutrality condition for undoped material (n=p) is not valid for these materials. In GaSb, the Ga{sub Sb} antisite defect appears to be grown-in from the melt. This contrasts with the As{sub Ga} defect in GaAs for which the concentration grown-in at the MP is negligibly small. Compensation of donor-doped material by donor-Group III vacancy complexes is shown to exist in all the compounds except InP where Group VI doped crystals are uncompensated and in InSb where there is a lack of experimental data. The annealing effects in n{sup +} GaAs, including lattice superdilation, which were shown in the earlier paper to be due to Group III vacancy undersaturation during cooling, are found to be present also in GaSb and InAs. Results for native point defects are compared with reported ''first principles'' calculations for GaAs. It is seen that, while there is some accord with experimental findings for low temperature molecular beam epitaxial (MBE) growth, they fail totally to predict the behavior under high temperature growth conditions. The analysis of data on liquid phase epitaxy (LPE) growth of GaAs from Bi solution in the earlier paper has been re-calculated in the light of experimental data that showed that the model used in that paper to represent the Ga-As-Bi phase equilibria was inadequate. An improved model reveals that Ga vacancies exert a greater effect in controlling the extent of the linear range of donor dopant solubility than previously predicted. It has also led to a re-evaluation of the equilibrium EL2 and Ga vacancy concentrations in GaAs during MBE growth under As-rich conditions at low temperatures ({approx}500 K). The amended model predicts that the very high concentrations of EL2 and of Ga vacancies observed experimentally are near equilibrium values. The predicted increase in the equilibrium concentrations of these defects at low temperatures results from coulombic attraction between the two defects. At temperatures somewhat lower than 500 K the rate of increase becomes catastrophic.

36 MATERIALS SCIENCE↗

Pulsed laser ablation of binary semiconductors: mechanisms of vaporisation and cluster formation

Formation of small clusters during pulsed ablation of two binary semiconductors, zinc oxide and indium phosphide, in vacuum by UV, visible, and IR laser radiation is comparatively studied. The irradiation conditions favourable for generation of neutral and charged Zn{sub n}O{sub m} and In{sub n}P{sub m} clusters of different stoichiometry in the ablation products are found. The size and composition of the clusters, their expansion dynamics and reactivity are analysed by time-of-flight mass spectrometry. A particular attention is paid to the mechanisms of ZnO and InP ablation as a function of laser fluence, with the use of different ablation models. It is established that ZnO evapourates congruently in a wide range of irradiation conditions, while InP ablation leads to enrichment of the target surface with indium. It is shown that this radically different character of semiconductor ablation determines the composition of the nanostructures formed: zinc oxide clusters are mainly stoichiometric, whereas In{sub n}P{sub m} particles are significantly enriched with indium. (photonics and nanotechnology)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The structure of sc16 GaP obtained at 17.5 GPa and 1400 K

We report using a laser-heated diamond anvil cell, a powdered sample of gallium phosphide was compressed to 17.5 GPa and heated up to 1400 K. The material obtained was characterized at room temperature using synchrotron x-ray diffraction. Experimental results were compared with first-principles calculations. The polymorph observed assumes the simple cubic structure (sc16) initially reported for GaAs at high pressures. Microdiffraction mapping showed variable grain sizes of the synthesized phase, with the largest grains located in the middle of the heated spot. Structural refinements were performed on selected grains. The structure predicted based on first-principles calculations is in close agreement with the experiments. The two Ga–P bonds show similar lengths in sc16-GaP; however, the bond angles differ, resulting in a distorted tetrahedral coordination geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stoichiometry, spin fluctuations, and superconductivity in LaNiPO

Superconductivity in LaNiPO is disrupted by small ({approx}5%) amounts of non-stoichiometry on the lanthanum site, even though the electronic contribution to the heat capacity increases with increasing non-stoichiometry. All samples also exhibit specific heat anomalies consistent with the presence of ferromagnetic spin fluctuations (T{sub sf}{approx} 14K). Comparison of layered nickel phosphide and nickel borocarbide superconductors reveals different structure-property correlations in the two families.

36 MATERIALS SCIENCE↗

Melt nonstoichiometry and defect structure of ZnGeP{sub 2} crystals

The defect structure of ZnGeP{sub 2} crystals grown from a melt by the vertical Bridgman method has been investigated. A deviation of the melt composition from stoichiometric leads to the formation of striations and the inclusions of other phases which are observed as structures (chains) oriented parallel to the growth axis. According to the microanalysis data, the inclusion composition corresponds to a mixture of ZnGeP{sub 2}, Zn{sub 3}P{sub 2}, and Ge. Nanoinclusions of germanium phosphide are detected by transmission electron microscopy. X-ray topography reveals defects of four types. The main defects in the central part of an ingot are related to the composition fluctuations, and the newly formed dislocations are basically single ones. Most dislocations are formed at the crystal periphery.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarization Possibilities of Small Spin-Orbit Interaction in Strained-Superlattice Photocathodes

Strained-superlattice photocathodes based on InGaP/GaAs were investigated. The photocathode performance is found highly dependent on the superlattice parameters. The electron confinement energy in superlattice appears important. The strained-superlattice structure based on GaAsP/GaAs, with a maximum polarization as high as 90% and more than 1% quantum efficiency, is presently the prime candidate for the ILC polarized electron photocathodes. A recent systematic study shows, however, that the peak polarization seems saturated even though the heavy-hole (HH) and light-hole (LH) band splitting is increased significantly, indicating that there is a material specific spin relaxation mechanism. It is widely accepted that the D'yakonov-Perel mechanism is the dominant spin relaxation mechanism in the III-V compound superlattice structures with a low p-doping ({le} 10{sup 17} cm{sup -3}), and that the spin relaxation may be reduced by choosing a material with a smaller spin-orbit interaction. As the spin-orbit interaction in phosphides is much smaller than in arsenides, strained-superlattice structure based on InGaP/GaAs were investigated. The computer code SPECCODE developed by Subashiev and Gerchikov has been used for calculating the band structures in superlattice.

36 MATERIALS SCIENCE↗

Kinetically Stable Oxide Overlayers on Mo 3 P Nanoparticles Enabling Lithium–Air Batteries with Low Overpotentials and Long Cycle Life

The main drawbacks of today's state-of-the-art lithium–air (Li–air) batteries are their low energy efficiency and limited cycle life due to the lack of earth-abundant cathode catalysts that can drive both oxygen reduction and evolution reactions (ORR and OER) at high rates at thermodynamic potentials. Here, inexpensive trimolybdenum phosphide (Mo 3 P) nanoparticles with an exceptional activity—ORR and OER current densities of 7.21 and 6.85 mA cm –2 at 2.0 and 4.2 V versus Li/Li + , respectively—in an oxygen-saturated non-aqueous electrolyte are reported. The Tafel plots indicate remarkably low charge transfer resistance—Tafel slopes of 35 and 38 mV dec –1 for ORR and OER, respectively—resulting in the lowest ORR overpotential of 4.0 mV and OER overpotential of 5.1 mV reported to date. Using this catalyst, a Li–air battery cell with low discharge and charge overpotentials of 80 and 270 mV, respectively, and high energy efficiency of 90.2% in the first cycle is demonstrated. Furthermore, a long cycle life of 1200 is also achieved for this cell. Density functional theory calculations of ORR and OER on Mo 3 P (110) reveal that an oxide overlayer formed on the surface gives rise to the observed high ORR and OER electrocatalytic activity and small discharge/charge overpotentials.

25 ENERGY STORAGE↗

In-situ Characterization of Water-Gas Shift Catalysts using Time-Resolved X-ray Diffraction

Time-resolved X-ray diffraction (XRD) has emerged as a powerful technique for studying the behavior of heterogeneous catalysts (metal oxides, sulfides, carbides, phosphides, zeolites, etc.) in-situ during reaction conditions. The technique can identify the active phase of a heterogeneous catalyst and how its structure changes after interacting with the reactants and products (80 K < T < 1200 K; P < 50 atm). In this article, we review a series of recent works that use in-situ time-resolved XRD for studying the water-gas shift reaction (WGS, CO + H2O ? H2 + CO2) over several mixed-metal oxides: CuMoO4, NiMoO4, Ce1-xCuxO2-d and CuFe2O4. Under reaction conditions the oxides undergo partial reduction. Neutral Cu0 (i.e. no Cu1+ or Cu2+ cations) and Ni0 are the active species in the catalysts, but interactions with the oxide support are necessary in order to obtain high catalytic activity. These studies illustrate the important role played by O vacancies in the mechanism for the WGS. In the case of Ce1-xCuxO2-d, Rietveld refinement shows expansions/contractions in the oxide lattice which track steps within the WGS process: CO(gas) + O(oxi) ? CO2(gas) + O(vac); H2O(gas) + O(vac) ? O(oxi) + H2(gas).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Retrofitting of carbon-supported bimetallic Ni-based catalysts by phosphorization for hydrogen evolution reaction in acidic media

Commercial bimetallic Ni–Mo and Ni–Re electrocatalysts supported on advanced conductive carbon are high-performing materials for H 2 evolution reaction in alkaline medium, but they cannot be applied in acidic medium due to the rapid dissolution of metals. Here, in this work, we solve this issue by introducing a convenient phosphorization protocol to convert these commercial metallic electrocatalysts into the respective phosphides, rendering them stable under acidic conditions, and thus providing a pathway to electrocatalysts for water reduction in acidic electrolyte. The novel materials demonstrate high performance, as reflected by the measured low overpotentials, shallow Tafel slopes, fast kinetics, as well as excellent stability and durability. This work opens the possibility to expand the applicability of commercial supported metallic catalysts and electrocatalysts through retrofitting via phosphorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbonyl substitution chemistry of some trimetallic transition metal cluster complexes with polyfunctional ligands

The trimetallic clusters [Ru{sub 3}(CO){sub 10}(dppm)], [Ru{sub 3}(CO){sub 12}] and [RuCo{sub 2}(CO){sub 11}] react with a number of multifunctional secondary phosphine and tertiary arsine ligands to give products consequent on carbonyl substitution and, in the case of the secondary phosphines, PH activation. The reaction with the unresolved mixed P/S donor, 1-phenylphosphino-2-thio(ethane), HSCH{sub 2}CH{sub 2}PHPh ({double_bond}LH{sub 2}), gave two products under various conditions which have been characterized by spectroscopic and crystallographic means. These two complexes [Ru{sub 3}({mu}dppm)(H)(CO){sub 7}(LH)] and [Ru{sub 3}({mu}-dppm)(H)(CO){sub 8}(LH)Ru{sub 3}({mu}-dppm)(CO){sub 9}], show the versatility of the ligand, with it chelating in the former and bridging two Ru{sub 3} units in the latter. The stereogenic centres in the molecules gave rise to complicated spectroscopic data which are consistent with the presence of diastereoisomers. In the case of [Ru{sub 3}(CO){sub 12}] the reaction with LH{sub 2} gave a poor yield of a tetranuclear butterfly cluster, [Ru{sub 4}(CO){sub 10}(L){sub 2}], in which two of the ligands bridge opposite hinge wingtip bonds of the cluster. A related ligand, HSCH{sub 2}CH{sub 2}AsMe(C{sub 6}H{sub 4}CH{sub 2}OMe), reacted with [RuCo{sub 2}(CO){sub 11}] to give a low yield of the heterobimetallic Ru-Co adduct, [RuCo(CO){sub 6}(SCH{sub 2}CH{sub 2}AsMe(C{sub 6}H{sub 4}CH{sub 2}OMe))], which appears to be the only one of its type so far structurally characterized. The secondary phosphine, HPMe(C{sub 6}H{sub 4}(CH{sub 2}OMe)) and its oxide HP(O)Me(C{sub 6}H{sub 4}(CH{sub 2}OMe)) also react with the cluster [Ru{sub 3}(CO){sub 10}(dppm)] to give carbonyl substitution products, [Ru{sub 3}(CO){sub 5}(dppm)({mu}{sub 2}-PMe(C{sub 6}H{sub 4}CH{sub 2}OMe)){sub 4}], and [Ru{sub 3}H(CO){sub 7}(dppm)({mu}{sub 2},{eta}{sup 1}P({double_bond}O)Me(C{sub 6}H{sub 4}CH{sub 2}OMe))]. The former consists of an open Ru{sub 3} triangle with four phosphide ligands bridging the metal-metal bonds; the latter has the O atom symmetrically bridging one Ru-Ru bond, the P atom being attached to a non-bridged Ru atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The layered metal Ti{sub 2}PTe{sub 2}

Crystals of Ti{sub 2}PTe{sub 2} have been synthesised by chemical vapour transport. Ti{sub 2}PTe{sub 2} crystallises, isostructural to the mineral tetradymite (Bi{sub 2}STe{sub 2}), in the space group R3-bar m with unit-cell parameters a=3.6387(2) A and c=28.486(2) A for the hexagonal setting. In the structure, layers of isolated phosphide and telluride anions form an ordered close sphere-packing with titanium cations filling two-thirds of the octahedral voids. From XANES fluorescence, the presence of Ti{sup 4+} is clearly established. In accordance with the ionic formula (Ti{sup 4+}){sub 2}(P{sup 3-})(Te{sup 2-}){sub 2}(e{sup -}) metallic conductivity ({rho}=40 {mu}{omega} cm at 300 K) and nearly temperature-independent paramagnetism are found. The electronic band structure shows bands of titanium states crossing the Fermi level in directions corresponding to the ab-plane and a band gap along the c-axis. - Graphical abstract: Crystal structure of Ti{sub 2}PTe{sub 2} with stacking sequence of the hexagonal layers of anions and cations. Highlighted in red is the octahedral coordination of phosphorus by titanium, and in grey the octahedral coordination of titanium by phosphorus and tellurium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The new ternary pnictides Er{sub 12}Ni{sub 30}P{sub 21} and Er{sub 13}Ni{sub 25}As{sub 19}: Crystal structures and magnetic properties

The new ternary pnictides Er{sub 12}Ni{sub 30}P{sub 21} and Er{sub 13}Ni{sub 25}As{sub 19} have been synthesized from the elements. They crystallize with hexagonal structures determined from single-crystal X-ray data for Er{sub 12}Ni{sub 30}P{sub 21} (space group P6{sub 3}/m, a=1.63900(3) nm, c=0.37573(1) nm, Z=1, R{sub F}=0.062 for 1574 F-values and 74 variable parameters), and for Er{sub 13}Ni{sub 25}As{sub 19} (Tm{sub 13}Ni{sub 25}As{sub 19}-type structure, space group P6-bar , a=1.6208(1) nm, c=0.38847(2) nm, Z=1, R{sub F}=0.026 for 1549 F-values and 116 variable parameters). These compounds belong to a large family of hexagonal structures with a metal-metalloid ratio of 2:1. HRTEM investigations were conducted to probe for local ordering of the disordered structure at the nanoscale. The magnetic properties of the phosphide Er{sub 12}Ni{sub 30}P{sub 21} have been studied in the temperature of range 2<T<300 K and with applied fields up to 5 T. The magnetic susceptibility follows the Curie-Weiss law from 4 to 300 K. The measured value of {mu}{sub eff}=9.59 {mu}{sub B} corresponds to the theoretical value of Er{sup 3+}. - Graphical abstract: The new ternary pnictides Er{sub 12}Ni{sub 30}P{sub 21} and Er{sub 13}Ni{sub 25}As{sub 19} have been synthesized from the elements. They crystallize with hexagonal structures determined from single-crystal X-ray data. The compounds belong to a large family of structures with a metal-metalloid ratio of 2:1. HRTEM investigations were conducted to probe for local ordering of the disordered structure at the nanoscale. Display Omitted

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of the ternary Zintl phases AE{sub 3}Al{sub 2}Pn{sub 4} and AE{sub 3}Ga{sub 2}Pn{sub 4} (AE=Ca, Sr, Ba, Eu; Pn=P, As)

Ten new ternary phosphides and arsenides with empirical formulae AE{sub 3}Al{sub 2}Pn{sub 4} and AE{sub 3}Ga{sub 2}Pn{sub 4} (AE=Ca, Sr, Ba, Eu; Pn=P, As) have been synthesized using molten Ga, Al, and Pb fluxes. They have been structurally characterized by single-crystal and powder X-ray diffraction to form with two different structures-Ca{sub 3}Al{sub 2}P{sub 4}, Sr{sub 3}Al{sub 2}As{sub 4}, Eu{sub 3}Al{sub 2}P{sub 4}, Eu{sub 3}Al{sub 2}As{sub 4}, Ca{sub 3}Ga{sub 2}P{sub 4}, Sr{sub 3}Ga{sub 2}P{sub 4}, Sr{sub 3}Ga{sub 2}As{sub 4}, and Eu{sub 3}Ga{sub 2}As{sub 4} crystallize with the Ca{sub 3}Al{sub 2}As{sub 4} structure type (space group C2/c, Z=4); Ba{sub 3}Al{sub 2}P{sub 4} and Ba{sub 3}Al{sub 2}As{sub 4} adopt the Na{sub 3}Fe{sub 2}S{sub 4} structure type (space group Pnma, Z=4). The polyanions in both structures are made up of TrPn{sub 4} tetrahedra, which share common corners and edges to form {sup 2}{sub {infinity}}[TrPn{sub 2}]{sub 3-} layers in the phases with the Ca{sub 3}Al{sub 2}As{sub 4} structure, and {sup 1}{sub {infinity}}[TrPn{sub 2}]{sub 3-} chains in Ba{sub 3}Al{sub 2}P{sub 4} and Ba{sub 3}Al{sub 2}As{sub 4} with the Na{sub 3}Fe{sub 2}S{sub 4} structure type. The valence electron count for all of these compounds follows the Zintl-Klemm rules. Electronic band structure calculations confirm them to be semiconductors. - Graphical abstract: AE{sub 3}Al{sub 2}Pn{sub 4} and AE{sub 3}Ga{sub 2}Pn{sub 4} (AE=Ca, Sr, Ba, Eu; Pn=P, As) crystallize in two different structures-Ca{sub 3}Al{sub 2}P{sub 4}, Sr{sub 3}Al{sub 2}As{sub 4}, Eu{sub 3}Al{sub 2}P{sub 4}, Eu{sub 3}Al{sub 2}As{sub 4}, Ca{sub 3}Ga{sub 2}P{sub 4}, Sr{sub 3}Ga{sub 2}P{sub 4}, Sr{sub 3}Ga{sub 2}As{sub 4}, and Eu{sub 3}Ga{sub 2}As{sub 4}, are isotypic with the previously reported Ca{sub 3}Al{sub 2}As{sub 4} (space group C2/c (No. 15)), while Ba{sub 3}Al{sub 2}P{sub 4} and Ba{sub 3}Al{sub 2}As{sub 4} adopt a different structure known for Na{sub 3}Fe{sub 2}S{sub 4} (space group Pnma (No. 62). The polyanions in both structures are made up of TrPn{sub 4} tetrahedra, which by sharing common corners and edges, form {sup 2}{sub {infinity}}[TrPn{sub 2}]{sub 3-}layers in the former and {sup 1}{sub {infinity}}[TrPn{sub 2}]{sub 3-} chains in Ba{sub 3}Al{sub 2}P{sub 4} and Ba{sub 3}Al{sub 2}As{sub 4}. Highlights: Black-Right-Pointing-Pointer AE{sub 3}Ga{sub 2}Pn{sub 4} (AE=Ca, Sr, Ba, Eu; Pn=P, As) are new ternary pnictides. Black-Right-Pointing-Pointer Ba{sub 3}Al{sub 2}P{sub 4} and Ba{sub 3}Al{sub 2}As{sub 4} adopt the Na{sub 3}Fe{sub 2}S{sub 4} structure type. Black-Right-Pointing-Pointer The Sr- and Ca-compounds crystallize with the Ca{sub 3}Al{sub 2}As{sub 4} structure type. Black-Right-Pointing-Pointer The valence electron count for all title compounds follows the Zintl-Klemm rules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗