Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PELLETING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Fabrication of large sintered pellets of Sb-doped n-type Mg{sub 2}Si using a plasma activated sintering method

Sb is known to be the most stable n-type dopant in Mg{sub 2}Si, whereas the reproducibility and sintering scalability of Sb-doped Mg{sub 2}Si has proved to be difficult. We have developed a metallic binder for the Sb-doped Mg{sub 2}Si sintering process. A remarkable benefit of the binder is that it enables us to reproducibly fabricate large sintered Sb-doped Mg{sub 2}Si pellets up to 30 mm in diameter with no internal cracks. For binder contents of 3-7 wt%, the observed power factor and thermal conductivity were identical to that of conventional Sb-doped samples, while excess binder degraded the TE properties. The binder mixture also plays a part in increasing the yield in the production of TE legs, up to 82% for 5 wt% Ni incorporation, as well as improving the hardness of the sintered sample. Incorporation of 5 wt% Ni binder affected an increase in the ZT value up to 0.97. - Graphical abstract: The sample of 30 mm in diameter is fabricated by using a Ni binder. Highlights: Black-Right-Pointing-Pointer We have developed a metallic binder for the Sb-doped Mg{sub 2}Si sintering process. Black-Right-Pointing-Pointer Sb-doped Mg{sub 2}Si pellets up to 30 mm in diameter with no internal cracks. Black-Right-Pointing-Pointer Incorporation of 5 wt% Ni binder affected an increase in the ZT value up to 0.97.

36 MATERIALS SCIENCE↗

Pellet-clad mechanical interaction screening using VERA applied to Watts Bar Unit 1, Cycles 1–3

The Consortium for Advanced Simulation of Light Water Reactors (CASL) aims to provide high-fidelity multiphysics simulations of light water nuclear reactors. To accomplish this, CASL is developing the Virtual Environment for Reactor Applications (VERA), which is a suite of code packages for thermal hydraulics, neutron transport, fuel performance, and coolant chemistry. As VERA continues to grow and expand, there has been an increased focus on incorporating fuel performance analysis methods. One of the primary goals of CASL is to estimate local cladding failure probability through pellet-clad interaction, which consists of both pellet-clad mechanical interaction (PCMI) and stress corrosion cracking. Estimating clad failure is important to preventing release of fission products to the primary system and accurate estimates could prove useful in establishing less conservative power ramp rates or when considering load-follow operations.While this capability is being pursued through several different approaches, the procedure presented in this article focuses on running independent fuel performance calculations with BISON using a file-based one-way coupling based on multicycle output data from high fidelity, pin-resolved coupled neutron transport–thermal hydraulics simulations. This type of approach is consistent with traditional fuel performance analysis methods, which are typically separate from core simulation analyses. A more tightly coupled approach is currently being developed, which is the ultimate target application in CASL.Recent work simulating 12 cycles of Watts Bar Unit 1 with VERA core simulator are capitalized upon, and quarter-core BISON results for parameters of interest to PCMI (maximum centerline fuel temperature, maximum clad hoop stress, and minimum gap size) are presented for Cycles 1–3. In conclusion, based on these results, this capability demonstrates its value and how it could be used as a screening tool for gathering insight into PCMI, singling out limiting rods for further, more detailed analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Plasma ion heating by cryogenic pellet injection

In this work, the injection of cryogenic pellets into a magnetically confined plasma is shown to be accompanied by a considerable transfer of thermal energy from the electrons in the background plasma to the ions. The resulting ion heating can be significant, particularly in plasmas with disparate electron and ion temperatures, and can affect the energy balance of the plasma. In recent Wendelstein 7-X experiments, this mechanism can account for a substantial fraction of the ion heating power during pellet injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Trace Impurities Identified as Forensic Signatures in CMX-5 Fuel Pellets Using X-ray Spectroscopic Techniques

We report that small-particle analysis is a highly promising emerging forensic tool for analysis of interdicted special nuclear materials. Integration of microstructural, morphological, compositional, and molecular impurity signatures could provide significant advancements in forensic capabilities. We have applied rapid, high-sensitivity, hard X-ray synchrotron chemical imaging to analyze impurity signatures in two differently fabricated fuel pellets from the 5th Collaborative Materials Exercise (CMX5) of the IAEA Nuclear Forensics International Working Group. The spatial distributions, chemical compositions, and morphological and molecular characteristics of impurities were evaluated using X-ray absorption near-edge structure (XANES) and X-ray fluorescence chemical imaging to discover principal impurities, their granularity, particle sizes, modes of occurrence (distinct grains vs incorporation in the UO 2 lattice), and sources and mechanisms of incorporation. Differences in UO 2+x stoichiometry were detected at the microscale in nominally identical UO 2 ceramics (CMX5-A and CMX5-B), implying the presence of multiple UO 2 host phases with characteristic microstructures and feedstock compositions. Al, Fe, Ni, W, and Zr impurities and integrated impurity signature analysis identified distinctly different pellet synthesis and processing methods. For example, two different Al, W, and Zr populations in the CMX5-B sample indicated a more complex processing history than the CMX5-A sample. K-edge XANES measurements reveal both metallic and oxide forms of Fe and Ni but with different proportions between each sample. Altogether, these observations suggest multiple sources of impurities, including fabrication (e.g., force-sieving) and feedstock (mineral oxides). This study demonstrates the potential of synchrotron techniques to integrate different signatures across length scales (angstrom to micrometer) to detect and differentiate between contrasting UO 2 fuel fabrication techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms of Polyethylene Terephthalate Pellet Fragmentation into Nanoplastics and Assimilable Carbons by Wastewater Comamonas

Comamonadaceae bacteria are enriched on poly(ethylene terephthalate) (PET) microplastics in wastewaters and urban rivers, but the PET-degrading mechanisms remain unclear. Here, we investigated these mechanisms with Comamonas testosteroniKF-1, a wastewater isolate, by combining microscopy, spectroscopy, proteomics, protein modeling, and genetic engineering. Compared to minor dents on PET films, scanning electron microscopy revealed significant fragmentation of PET pellets, resulting in a 3.5-fold increase in the abundance of small nanoparticles (<100 nm) during 30-day cultivation. Infrared spectroscopy captured primarily hydrolytic cleavage in the fragmented pellet particles. Solution analysis further demonstrated double hydrolysis of a PET oligomer, bis(2-hydroxyethyl) terephthalate, to the bioavailable monomer terephthalate. Supplementation with acetate, a common wastewater co-substrate, promoted cell growth and PET fragmentation. Of the multiple hydrolases encoded in the genome, intracellular proteomics detected only one, which was found in both acetate-only and PET-only conditions. Homology modeling of this hydrolase structure illustrated substrate binding analogous to reported PET hydrolases, despite dissimilar sequences. Mutants lacking this hydrolase gene were incapable of PET oligomer hydrolysis and had a 21% decrease in PET fragmentation; re-insertion of the gene restored both functions. Thus, we have identified constitutive production of a key PET-degrading hydrolase in wastewater Comamonas, which could be exploited for plastic bioconversion.

54 ENVIRONMENTAL SCIENCES↗

Effect of solid-electrolyte pellet density on failure of solid-state batteries

Abstract Despite the potentially higher energy density and improved safety of solid-state batteries (SSBs) relative to Li-ion batteries, failure due to Li-filament penetration of the solid electrolyte and subsequent short circuit remains a critical issue. Herein, we show that Li-filament growth is suppressed in solid-electrolyte pellets with a relative density beyond ~95%. Below this threshold value, however, the battery shorts more easily as the density increases due to faster Li-filament growth within the percolating pores in the pellet. The microstructural properties (e.g., pore size, connectivity, porosity, and tortuosity) of $$75\%{{{{{\rm{L}}}}}}{{{{{{\rm{i}}}}}}}_{2}{{{{{\rm{S}}}}}}-25\%{{{{{{\rm{P}}}}}}}_{2}{{{{{{\rm{S}}}}}}}_{5}$$ 75 % L i 2 S − 25 % P 2 S 5 with various relative densities are quantified using focused ion beam–scanning electron microscopy tomography and permeability tests. Furthermore, modeling results provide details on the Li-filament growth inside pores ranging from 0.2 to 2 μm in size. Our findings improve the understanding of the failure modes of SSBs and provide guidelines for the design of dendrite-free SSBs.

25 ENERGY STORAGE↗

Shattered pellet injection simulations with NIMROD

Optimal strategies for disruption mitigation benefit from the understanding of details both spatially and temporally. Beyond the assessment of the efficacy of a particular proposed Disruption Mitigation System (DMS), ITER's longevity will require accounting of both mitigated and unmitigated disruptions. Accurate models and validated simulations that detail multiple ITER scenarios with mitigated and unmitigated disruptions are essential for accurate estimates of load damage. The primary candidate for ITER's DMS is Shattered Pellet Injection (SPI); its efficacy must be evaluated within the next several years. To perform critical time dependent 3-D nonlinear simulations, we have developed a particle based SPI model in the NIMROD code coupled to its modified single fluid equations with impurity and radiation [Izzo, Nucl. Fusion 46(5), 541 (2006)]. SPI validation simulations of the thermal quench and comparisons to DIII-D impurity scan experiments [Shiraki et al., Phys. Plasmas 23(6), 062516 (2016)] are presented. We also present an initial ITER Q = 10 pure neon SPI simulation and compare it with the DIII-D SPI simulations. NIMROD SPI simulations demonstrate that the ablating fragment drives strong parallel flows that transport the impurities and governs the thermal quench. Analysis of SPI simulations shows that the mixed deuterium/neon SPI results in a more benign thermal quench due to the enhanced transport caused by the additional deuterium. These results suggest that an optimal pellet mixture exists for the SPI system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle balance of deuterium during deuterium shattered pellet injection shutdown in DIII-D

A particle balance analysis was conducted during a deuterium (D 2 ) shattered pellet injection-induced plasma shutdown on the DIII-D tokamak to determine why less than 20% of the pellet material is assimilated into the core plasma by the mid-current quench (CQ). Initially, most of the D 2 is injected as frozen shards and ionized upon entering the vessel. During the thermal quench, ionized particles move to the divertors and subsequently to the center post (CP) walls, where they rapidly recycle and partially accumulate as neutrals without assimilating into the core plasma. In contrast, the particle flux to the outer midplane walls is negligible, despite being accompanied by hot plasma with electron temperatures exceeding 100 eV. During mid-CQ, volume recombination effects, although not large enough to impact overall particle balance, were significant enough to require accounting for accurate interpretation of fast-framing camera D-alpha signals and the estimation of the CP wall particle flux. In addition, toroidal asymmetries, observed in measurements of toroidal electron density perturbations and the phase of magnetohydrodynamic modes, are present throughout the shutdown and can account for a discrepancy in the assimilation rate for up to 50% of the observed D 2 particle inventory. These sources and sinks of particles and fluxes were identified using absolutely calibrated D-alpha brightness and Langmuir probes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tri-reforming of surrogate blogs over Ni/Mg/ceria-zirconia/alumina pellet catalysts

The performance of catalytic tri-reforming under industrially relevant situations (e.g., pellet catalysts, pressurized reactor) was investigated using surrogate biogas as the feedstock. Tri-reforming using Ni/Mg/Ce 0.6 Zr 0.4 O 2 /Al 2 O 3 pellet catalysts was studied in a bench scale fixed-bed reactor. The feed molar ratio for CH 4 : CO 2 : air was fixed as 1.0: 0.70: 0.95. The effects of temperature (800 – 860 °C), pressure (1 – 6 bar), and H 2 O/CH 4 molar feed ratio (0.23 – 0.65) were examined. Pressure has substantial impact on the reaction and transport rates and equilibrium conversions, making it a key variable. At 860 °C, CO 2 conversion increased from 4 to 61% and H 2 /CO molar ratio decreased from 2.0 to 1.1 as the pressure changed from 1 to 6 bar. CO 2 conversion and H 2 /CO molar ratio were also influenced by the temperature and H 2 O/CH 4 molar ratio. At 3 bar, CO 2 conversion varied between 4 and 43% and the H 2 /CO molar ratio varied between 1.2 and 1.9 as the temperature changed from 800 to 860 °C. At 3 bar and 860 °C, CO 2 conversion decreased from 35 to 8% and H 2 /CO molar ratio increased from 1.7 to 2.4 when the H 2 O/CH 4 molar ratio was increased from 0.23 to 0.65. This work demonstrates that the tri-reforming technology is feasible for converting biogas under scaled-up conditions in a fixed-bed reactor.

09 BIOMASS FUELS↗

Heating and ablation of high- Z cryogenic pellets in high temperature plasmas

A kinetic model is developed here to determine the power deposition from energetic electrons into the neutral gas shield of an ablating high-Z pellet. For high-Z, the velocity distribution of the hot electrons is nearly isotropic, and we use this feature to develop solutions to the kinetic equation. In contrast to pre-existing models, we consider the effect of gyro-motion as well as elastic scattering of the hot electrons. Two limits are considered: when the gyro-frequency is much greater than the elastic collision frequency, the hot electrons diffuse longitudinally along the field lines as they slow down; but if the gyro-frequency is much less than the elastic collision frequency, the hot electrons diffuse radially. In both limits, it is possible to express the kinetic equation describing the hot electrons independently of the gas density profile, and therefore, the power deposition model is universal in this respect. The emphasis on elastic scattering yields an ablation rate which scales as Z -7/6 which is different than Z -2/3 shown in Sergeev et al (2006 Plasma Phys. Rep. 32 5). It is also demonstrated that the sheath potential required to maintain ambipolarity in the cloud scales as Z -1/3 . Fluid simulations yield ablation rates that scale with the four-thirds power of the pellet radius in agreement with [2].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shattered pellet penetration in low and high energy plasmas on DIII-D

Shattered Pellet Injection (SPI) was previously adopted as the baseline disruption mitigation system for ITER, as the radiative payload penetration into DIII-D plasmas from SPI is superior to those using the Massive Gas Injection (MGI) method. Because of the substantial differences in the energy content of ITER plasma and those in present experiments, reliable 3d MHD modeling, benchmarked against present experiments is needed to project to ITER plasmas. On account of these needs, the depth of SPI fragment penetration in DIII-D plasmas was investigated by injecting SPI into two discharges with vastly different energy content and pedestal height. 400 Torr-L pure Ne fragmented pellets at a velocity of about 200 m s -1 were injected into a 0.2 MJ L-mode discharge and a 2 MJ super H-mode discharge. Results show deep penetration of SPI fragments into low-energy plasmas in DIII-D. SPI fragment penetration is reduced as the plasma energy content increases, with some discharges exhibiting penetration that is confined to the outer regions of the plasma. The injected SPI fragments are also spread out over a distance of about 20 cm, which results in some fragments arriving near the end of or after the thermal quench is over.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ablating Pellets for Areal Density Symmetry Control in Indirectly Driven Inertial Confinement Fusion Target Designs

Asymmetry of the compressed fusion fuel configuration, as characterized by a variation in areal density, in inertial confinement fusion (ICF) implosions is a known performance limitation. While ignition has been achieved on the National Ignition Facility (NIF), implosion symmetry was not perfect, and subsequent experiments that have extended fusion performance still struggle with symmetry control and would, in principle, perform much better if the areal density uniformity of the fuel was improved by eliminating thin regions in the DT (Deuterium-Tritium) fuel that develop by the time of peak compression. In indirect drive (IDD), altering the time-dependent laser cone fraction and cross-beam energy transfer are the usual tactics for controlling implosion asymmetry in IDD target designs, but it may be that those tools have been pushed to their limits. In this Letter, we present a new tactic for controlling the implosion using satellite ablating pellets to manipulate the time-dependent x-ray field around an ICF capsule. In theory and in simulations the action of these pellets is quite effective at reducing the swing of x-ray drive from waist hot to pole hot, thus achieving a more one-dimensional fuel configuration at peak compression. Simulations show that a factor of ∼2 in yield performance can be obtained via this technique, when applied to past record implosions on the NIF. As a result, some speculative alternate uses of the proposed target concept are also mentioned in the conclusion of this Letter.

Implosion symmetry↗

Modeling In-Reactor Temperature Gradients in Lithium Aluminate Ceramic Pellets

In reactor thermal performance of lithium aluminate ceramic pellets are calculated to determine operating temperatures if internal components shift during irradiation. A 2D conduction model was setup to model this scenario with additional physics, including thermal expansion of components to reactor temperatures, creep down of the cladding due to differential pressure between the inside of the rod and reactor coolant system, and net radiation exchange between components. The non-linear coupling of the governing equations presented convergence challenges due to the very different effects from a small temperature change on the radiation vs radial and circumferential conduction equations. Initial temperature guesses for the multidimensional solution were provided from conservative 1D models simulating bounding scenarios. Convergence was greatly improved by taking small steps towards the root solutions and averaging with initial guesses. The final method robustly converged all 132 points at an axial plane after a few dozen iterations. The temperature results show that the additional physics have a secondary effect as the dominant heat transfer mechanism is radial conduction across the gas gap followed by circumferential conduction around components. Circumferential conduction in the lithium aluminate pellets is enhanced by the relatively high thermal conductivity of this ceramic.

Carstens, Nathan A.↗

Fundamental Studies of Tritium Solubility and Diffusivity in LiAlO 2 and Lithium Zirconates Pellets Used in TPBAR

Using atomistic level calculations, in this study, we propose to investigate the solubility and diffusivity properties of hydrogen isotopes in the blanket candidate materials (e.g. Li 2 O, LiAlO 2 , Li 2 ZrO 3 , Li 6 Zr 2 O 7 , Li 8 ZrO 6 , Li 4 SiO 4 , etc.) for TPBARs to enable tritium production in PWRs and to improve the performances of these components. With the knowledge of $3\atop{1}$T transport, the potential impact of the candidate performance mechanisms of the pellet materials can be evaluated computationally. Using results from our previously performed research on the electronic and thermodynamic properties of these ceramic materials, we will study the $3\atop{1}$T diffusivity and solubility in the abovementioned lithium ceramic materials. Lithium zirconates are stable at very high temperatures and have high densities and ion conductivities. These materials can also be used as pellets which may result in a better overall performance in TPBAR. Lithium zirconates contain lithium-rich phases, such as Li 6 Zr 2 O 7 , Li 8 ZrO 6 , which may result in a high 6 Li density to minimize the 6 Li enrichment. The focus of current research is to identify the mechanisms associated with atomic $3\atop{1}$T formation, diffusion, transport, deposition, and the kinetics at high temperature. For these purposes, we will employ first-principles density functional theory (DFT) and molecular dynamics (MD) simulations to perform our investigations.

07 ISOTOPE AND RADIATION SOURCES↗

Bison Modeling of SiC/SiC Cladding Including Fuel-Pellet Interaction

SiC/SiC composites are considered leading candidates for accident tolerant fuel cladding in light water reactors. However, when SiC-based materials are exposed to neutron irradiation, they experience significant changes in dimensions and physical properties. In the extreme nuclear reactor environment, SiC-based fuel cladding will see neutron damage, significant heat flux, as well as a corrosive environment. In this report, we evaluate the effect of non-uniform changes in the dimensions caused by neutron irradiation with variable temperatures, along with the closing of the fuel – clad gap, on the stress development in the clad over the course of time. To ensure reliable and safe operation of accident tolerant fuel cladding concepts such as SiC-based materials, it is important to assess its thermo-mechanical performance under in-reactor conditions of irradiation and realistic temperature distributions. In this work, we have used the BISON fuel performance modeling code to perform the thermo-mechanical analysis of SiC/SiC cladding. A constitutive model is constructed and solved numerically to predict the stress distribution and variation in the cladding under normal operating conditions. The dependence of dimensions and physical properties variation with irradiation and temperature has been incorporated. These initial results from the analyses provides insights about the stress distribution and variation with time in the cladding as well as the interaction of fuel pellet with the cladding under different conditions of initial fuel pellet-cladding gap and steady state power levels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Progress on Synthesis of Low Content Inert Matrix Fuel Pellets

Progress was made on optimizing hot-press parameters for preparing fuel for two different coating methods: chemical vapor deposition (CVD) and chemical vapor infiltration (CVI). Surrogate materials, CeO 2 and ZrO 2 , were used in place of UO 2 and PuO 2 for fuel development. Although the more porous CeO 2 pellets were not successfully made to the extent that CVI would work with them as intended, hot-press parameters were optimized such that the pellets could be coated using CVD. The ZrO 2 was denser and therefore could more successfully be pressed to CVI standards; however, further improvement is needed before the process is implemented. Future work will continue to explore the optimization of a porous structure for CVI.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sulfur Pellets Responses to a Bare and Steel Reflected Pulse of the Oak Ridge National Laboratory Health Physics Research Reactor

The experiments analyzed in this report were conducted at the Health Physics Research Reactor (HPRR), also known as the $\textit{Fast Burst Reactor}$. The reactor was designed and built at Oak Ridge National Laboratory (ORNL) in 1961. The HPRR was an unmoderated, unshielded fast reactor that used highly enriched uranium and molybdenum alloy as fuel. The reactor was initially sent to the Nevada Test Site in 1962, where it was used to evaluate radiation doses received as a result of the Hiroshima and Nagasaki bombings during World War II. A few years later, the reactor was sent back to ORNL to be part of the Dosimetry Application Research (DOSAR) facility shown in Figure 1, which included a reactor building shown on the left (west) of the picture and a control and laboratory building in the upper right corner (northeast). The critical assembly was used for numerous technical studies, including systems calibration, dosimetry, radiobiology of plants and animals, testing of radiation alarms, as well as teaching and training in radiation dosimetry and nuclear engineering. Between 1963 and 1987, the HPRR was operated for thousands of hours, achieving criticality close to 10,000 times and motivating many publications. The HPRR was decommissioned in 1987. The goal of this effort was to use historical data from operation of the HPRR to create a criticality accident alarm system (CAAS) benchmark to be included in the $\textit{International Handbook of Evaluated Criticality Safety Benchmark Experiments}$ (ICSBEP Handbook). A thorough inspection was performed of all available documentation and information available. The most promising experiments that were selected for evaluation were those described in the 1987 ORNL report entitled $\textit{Health Physics Research Reactor Reference Dosimetry}$, ORNL-6240. The report includes reference dosimetry results of the shielded and unshielded configurations of the HPRR after burst operations. Because of changes to the reactor positioning and storage systems that were made in 1985, the previous dosimetry reports became obsolete, and the newly designed experiments were needed to create the HPRR’s adjusted dosimetry data. The various results reported in ORNL-6240 include reference doses and dose equivalents from different conventions at different distances and elevations as determined using the detected neutron fluence and conversion factors. The HPRR neutron fluence was obtained through different methods, including sulfur pellet analysis and threshold detector unit data. Information about the HPRR spectrum was also obtained through Bonner sphere measurements. This benchmark is focused on a part of the measured sulfur fluences reported in Appendix H of ORNL-6240. Standard commercial sulfur pellets were placed at different distances from the HPRR centerline during burst operation and were activated due to the 32 S(n,p) 32 P reaction. The resulting 32 P activity was then measured and the information about the corresponding sulfur fluence and/or neutron dose could be extracted. Many of those measurements have 7 been performed with the HPRR in its bare configuration or with different shields (combinations of Lucite, concrete, steel). All the necessary, precise information about material and/or dimensions of the different shields was not found, so it was decided to focus only on the unshielded and steel-shielded configurations to minimize the benchmark uncertainty. A total of 31 cases (24 unshielded and 7 shielded cases at different positions) of sulfur fluence were selected before evaluation to develop the benchmark.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

First-principles Studies of Tritium Species Formation on and Desorption from Surfaces of $γ- LiAlO_2$ Pellets with Related Secondary Phase

The $γ- LiAlO_2$ ceramics enriched with the $^6Li$ isotope are used in the form of annular pellets in tritium-producing burnable absorber rods (TPBARs). When irradiated in a pressurized water reactor (PWR), the $^6Li$ absorbs neutrons, simulating the nuclear characteristics of a burnable absorber rod, and produces tritium $(_{1}^{3}H, T)$. Once the $_{1}^{3}H$ is produced in the bulk of $γ- LiAlO_2$, it diffuses to its surface, forming different $_{1}^{3}H$ species (possibly $T, OT, T_2, or T_2O$). The $T_2O$ is expected to be generated from experiment, to avoid $_{1}^{3}H$ leakage. However, up to now, it is still not clear which $_{1}^{3}H$ species are formed on the $γ- LiAlO_2$ surface and travel to the getter. Besides, with the dramatic Li loss under irradiation, the secondary phase (possibly $LiAl_5O_8$) precipitates and participates into the $_{1}^{3}H$ diffusivity and $_{1}^{3}H$ species formation. Therefore, exploring $_{1}^{3}H$ species formation on and desorption from surfaces of $γ- LiAlO_2$ with related secondary phases becomes a very important task to provide a better understanding of $_{1}^{3}H$H species escaping from pellets.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗