Chloride Treatments Improve Zinc Telluride Absorbers for Photoelectrochemical Carbon Dioxide Reduction
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “PEC”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Tuning Intermediate Bands of Protective Coatings to Reach the Bulk-Recombination Limit of Stable Water-Oxidation GaP Photoanodes
Stable photoelectrochemical solar fuel production requires protective coatings to achieve effective charge separation, transport, and injection at the semiconductor–liquid interfaces, implying that the coating should energetically align its intermediate band (IB) with both the photoabsorber's band edge and co-catalyst's potentials. Yet approaches to adjust coating IB positions to accommodate various semiconductor light absorbers for constructing efficient and stable photoelectrodes have not been developed. In this report, three types of transition metal (M = Mn 2+ , Mn 3+ , and Cr 3+ ions) alloyed TiO2 coatings are discovered using atomic layer deposition (ALD). The IB energetics of these coatings are characterized by X-ray photoelectron spectroscopy and are found to be tunable inside the TiO 2 bandgap, through varying ALD growth conditions. By applying these coatings to n-type GaP and integrating with IrO x co-catalysts, the water-oxidation J–E performance is comparable to an uncoated corroding GaP photoanode. It reaches the bulk recombination limit of the GaP and achieves ≈28% absorbed photon to current efficiency under 475-nm light excitation (6.48 mW cm -2 ) and 100-h stable water oxidation. The outstanding performance and stability are attributed to the efficient charge separation and hole transport, as allowed by the energy alignment of the coating IB and the GaP valence band edge.
36 MATERIALS SCIENCE↗
Antimony(III) Sulfide Thin Films as a Photoanode Material in Photocatalytic Water Splitting
Here, we introduce exploratory investigations on the performance of thermally evaporated Sb 2 S 3 thin film photoanodes for solar-assisted water splitting applications. With a bandgap of 1.72 eV, a 250 nm thick Sb 2 S 3 photoanode showed a saturation photocurrent density of ~600 µA cm -2 measured at 1.0 V vs. reversible hydrogen electrode (RHE) in 0.1 M Na 2 SO 4 under 1-sun illumination, with an onset potential of ~0.25 V vs. RHE. However, subsequent photodegradation studies revealed that the material dissolves relatively quickly with the application of both illumination and bias. Nonetheless, Sb 2 S 3 does have the advantage of having a relatively low optimal fabrication temperature of 300 °C and thus may have utility as a top cell absorber of a tandem device where the bottom cell is temperature sensitive, if protected from corrosion. Thus, we characterized relevant aspects of the material in an attempt to explain the large difference between the theoretical maximum and measured current density. From our characterization it is believed that the photocatalytic efficiency of this material can be improved by modifying the surface to reduce optical reflection and addressing inherent issues such as high electrical resistivity and surface defects.
36 MATERIALS SCIENCE↗
Synergetic effect of Ti 3+ and oxygen doping on enhancing photoelectrochemical and photocatalytic properties of TiO 2 /g-C 3 N 4 heterojunctions
To improve the utilization of visible light and reduce photogenerated electron/hole recombination, Ti 3+ self-doped TiO 2 /oxygen-doped graphitic carbon nitride (Ti 3+ -TiO 2 /O-g-C 3 N 4 ) heterojunctions were prepared via hydrothermal treatment of a mixture of g-C 3 N 4 and titanium oxohydride sol obtained from the reaction of TiH 2 with H 2 O 2 . In this way, exfoliated O-g-C 3 N 4 and Ti 3+ -TiO 2 nanoparticles were obtained. Simultaneously, strong bonding was formed between Ti 3+ -TiO 2 nanoparticles and exfoliated O-g-C 3 N 4 during the hydrothermal process. Charge transfer and recombination processes were characterized by transient photocurrent responses, electrochemical impedance test, and photoluminescence spectroscopy. The photocatalytic performances were investigated through rhodamine B degradation test under an irradiation source based on 30 W cold visible-light-emitting diode. The highest visible-light photoelectrochemical and photocatalytic activities were observed from the heterojunction with 1:2 mass ratio of Ti 3+ -TiO 2 to O-g-C 3 N 4 . The photodegradation reaction rate constant based on this heterojuction is 0.0356 min -1 , which is 3.87 and 4.56 times higher than those of pristine Ti 3+ -TiO 2 and pure g-C 3 N 4 , respectively. Here, the remarkably high photoelectrochemical and photocatalytic performances of the heterojunctions are mainly attributed to the synergetic effect of efficient photogenerated electron-hole separation, decreased electron transfer resistance from interfacial chemical hydroxy residue bonds, and oxidizing groups originating from Ti 3+ -TiO 2 and O-g-C 3 N 4 .
25 ENERGY STORAGE↗
Interfacial engineering of gallium indium phosphide photoelectrodes for hydrogen evolution with precious metal and non-precious metal based catalysts
Gallium indium phosphide (GaInP 2 ) is a semiconductor with promising optical and electronic properties to serve as the large bandgap, top junction in a dual absorber tandem solar water splitting device. Poor intrinsic catalytic ability and surface corrosion in aqueous electrolyte remain key obstacles. Significant progress has been made developing thin-film protection layers and active catalysts for photoelectrochemical devices, but combining these into a catalytic protection layer that can provide long-term stability without sacrificing performance has proven difficult due, in large part, to challenges in developing active and stable interfaces. In this work, we demonstrate that a nanoscale molybdenum disulfide (MoS 2 ) film functions both as an effective protection layer and excellent hydrogen evolution catalyst for GaInP 2 photocathodes, with only a ~10% loss in initial light-limited current density after 100 h, and a photocurrent onset potential better than that of the same state-of-the-art device with a platinum-ruthenium catalyst. Using transient photoreflectance spectroscopy, we probed the carrier dynamics of these photocathodes and show that the MoS 2 coated device exhibits improved electron transfer at the surface interface compared to the PtRu catalyzed device. These MoS 2 protected devices are among the most active and stable single-absorber photocathodes for solar water splitting to date and offer a promising pathway towards generating hydrogen with high efficiency and significant longevity.
08 HYDROGEN↗
Sn-assisted heteroepitaxy improves ZnTiN 2 photoabsorbers
Ambient temperature growth on Si produces a polycrystalline ZnTiN 2 film while Sn-assisted growth on sapphire at elevated temperature results in a single-crystal-like ZnTiN 2 film with significantly reduced sub-bandgap absorption.
36 MATERIALS SCIENCE↗
Synthesis and characterization of titanium-alloyed hematite thin films for photoelectrochemical water splitting
We have synthesized pure and Ti-alloyed hematite thin films on F doped SnO{sub 2} coated glass substrates by radio frequency magnetron co-sputtering of iron oxide and titanium targets in mixed Ar/O{sub 2} and mixed N{sub 2}/O{sub 2} ambient. We found that the hematite films deposited in the N{sub 2}/O{sub 2} ambient exhibit much poorer crystallinity than the films deposited in the Ar/O{sub 2} ambient. We determined that Ti alloying leads to increased electron carrier concentration and crystallinity, and reduced bandgaps. Moreover, Ti-alloyed hematite thin films exhibited improved photoelectrochemical performance as compared with the pure hematite films: The photocurrents were enhanced and the photocurrent onset shifted to less positive potentials.
36 MATERIALS SCIENCE↗
Searches for baryon number violation in neutrino experiments: a white paper
Abstract Baryon number conservation is not guaranteed by any fundamental symmetry within the standard model, and therefore has been a subject of experimental and theoretical scrutiny for decades. So far, no evidence for baryon number violation has been observed. Large underground detectors have long been used for both neutrino detection and searches for baryon number violating processes. The next generation of large neutrino detectors will seek to improve upon the limits set by past and current experiments and will cover a range of lifetimes predicted by several Grand Unified Theories. In this White Paper, we summarize theoretical motivations and experimental aspects of searches for baryon number violation in neutrino experiments.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
MAUS: the MICE analysis user software
The Muon Ionization Cooling Experiment (MICE) collaboration has developed the MICE Analysis User Software (MAUS) to simulate and analyze experimental data. It serves as the primary codebase for the experiment, providing for offline batch simulation and reconstruction as well as online data quality checks. The software provides both traditional particle-physics functionalities such as track reconstruction and particle identification, and accelerator physics functions, such as calculating transfer matrices and emittances. The code design is object orientated, but has a top-level structure based on the Map-Reduce model. This allows for parallelization to support live data reconstruction during data-taking operations. MAUS allows users to develop in either Python or C++ and provides APIs for both. Various software engineering practices from industry are also used to ensure correct and maintainable code, including style, unit and integration tests, continuous integration and load testing, code reviews, and distributed version control. The software framework and the simulation and reconstruction capabilities are described.
47 OTHER INSTRUMENTATION↗
Performance of the MICE diagnostic system
Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. This paper documents the performance of the detectors used in MICE to measure the muon-beam parameters, and the physical properties of the liquid hydrogen energy absorber during running.
43 PARTICLE ACCELERATORS↗
Multiple Coulomb scattering of muons in lithium hydride
Not Available
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Fungal community structure and function shifts with atmospheric nitrogen deposition
Fungal decomposition of soil organic matter depends on soil nitrogen (N) availability. This ecosystem process is being jeopardized by changes in N inputs that have resulted from a tripling of atmospheric N deposition in the last century. Soil fungi are impacted by atmospheric N deposition due to higher N availability, as soils are acidified, or as micronutrients become increasingly limiting. Fungal communities that persist with chronic N deposition may be enriched with traits that enable them to tolerate environmental stress, which may trade-off with traits enabling organic matter decomposition. We hypothesized that fungal communities would respond to N deposition by shifting community composition and functional gene abundances toward those that tolerate stress but are weak decomposers. We sampled soils at seven eastern US hardwood forests where ambient N deposition varied from 3.2 to 12.6 kg N ha -1 year -1 , five of which also have experimental plots where atmospheric N deposition was simulated through fertilizer application treatments (25–50 kg N ha -1 year -1 ). Fungal community and functional responses to fertilizer varied across the ambient N deposition gradient. Fungal biomass and richness increased with simulated N deposition at sites with low ambient deposition and decreased at sites with high ambient deposition. Fungal functional genes involved in hydrolysis of organic matter increased with ambient N deposition while genes involved in oxidation of organic matter decreased. One of four genes involved in generalized abiotic stress tolerance increased with ambient N deposition. In summary, we found that the divergent response to simulated N deposition depended on ambient N deposition levels. Fungal biomass, richness, and oxidative enzyme potential were reduced by N deposition where ambient N deposition was high suggesting fungal communities were pushed beyond an environmental stress threshold. Fungal community structure and function responses to N enrichment depended on ambient N deposition at a regional scale.
59 BASIC BIOLOGICAL SCIENCES↗
Synthesis and Characterization of Titanium Doped Hematite for Photoelectrochemical Water Splitting
Explore the source record for details and available documents.
14 SOLAR ENERGY↗
First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment
The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification system that can reject efficiently both pions and electrons. The position and momentum of each muon are measured using a high-precision scintillating-fibre tracker in a 4 T solenoidal magnetic field. This paper presents the techniques used to reconstruct the phase-space distributions in the upstream tracking detector and reports the first particle-by-particle measurement of the emittance of the MICE Muon Beam as a function of muon-beam momentum.
43 PARTICLE ACCELERATORS↗
2018 Water Splitting Technologies Benchmarking and Protocols Workshop
The HydroGEN EMN (Energy Materials Network) benchmarking team held a workshop for the advanced water splitting technologies on October 24-25 at Arizona State University, in Tempe, AZ. Several breakout sessions were held for each technology area, to gather information for developing material protocols and identifying critical parameters.
08 HYDROGEN↗
2019 Water Splitting Technologies Benchmarking and Protocols Workshop
Explore the source record for details and available documents.
benchmarking hydrogen water splitting technologies↗
2024 Water Splitting Technologies Benchmarking and Protocols Workshop
The sixth annual Advanced Water Splitting Pathways Benchmarking meeting was held on June 11-12, 2024 at the Arizona State University California Center- Los Angeles, CA. A total of 117 people participated (102 in person and 15 via Zoom). Attendance at most breakout sessions ranged from 10 - 25 attendees. The focus of many of the sessions was on developing plans to validate protocols written to date, defining future protocols to be written and aligning with international efforts. The plenary session provided perspectives on international activities in each technology area, as well as an overview of the ARCHES Hydrogen Hub.
08 HYDROGEN↗
Final Science Report of the Joint Center for Artificial Photosynthesis (JCAP)
The Joint Center for Artificial Photosynthesis (JCAP) was designated as the U.S. Department of Energy (DOE) Fuels from Sunlight Energy Innovation Hub on July 22, 2010, and began operations according to a cooperative agreement between the DOE and the California Institute of Technology on September 30, 2010. The cooperative agreement was renewed on September 30, 2015. This final science report outlines JCAP research activities from September 30, 2010 to September 30, 2021.
08 HYDROGEN↗