Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Organic acids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Sustainable bioleaching of lithium-ion batteries for critical materials recovery

The demand for lithium-ion batteries (LIBs) has increased substantially over the last few decades due to their longer lifetime, greater resistance to self-discharge, and higher output voltage compared to other battery types. With the global trend of electrifying vehicle fleets, the number of LIBs reaching their end-of-life (EOL) is expected to grow substantially in the next decade. These EOL LIBs represent a significant secondary source of materials (e.g., Li, Co, Ni, Mn) that can be recovered and reused in LIBs or other products. In this study, we developed a bioleaching process that could recover critical materials from EOL LIBs in an economical and environmentally sustainable manner under industrially relevant conditions. Black mass, i.e., cathode-containing powder, prepared from EOL LIBs was leached using a biolixiviant produced from corn stover by Gluconobacter oxydans bacteria. Iron(II) was used as a reducing agent to promote metal dissolution. Techno-economic analysis (TEA) estimated a potential average profit margin of 21% for processing 10,000 t of black mass per year, which represents approximately 30% of the available black mass in the US in 2020. Life cycle assessment (LCA) demonstrated that bioleaching of spent LIBs could be more environmentally sustainable than alternative hydrometallurgical recovery methods such as hydrochloric acid leaching (16-19 kg vs. 43-91 kg CO 2 equivalent global warming potential per kg of recovered cobalt). The TEA results are highly dependent on the cost of black mass production, which varies by EOL LIB collection and transportation costs. Finally, emerging technologies for deactivating used LIBs for fire safety at collection centers will allow the transport of EOL LIBs as non-hazardous materials, lower the cost of preparing black mass and thereby increase economic prospects for EOL LIBs recycling using this approach.

25 ENERGY STORAGE↗
DOE OSTI2025

Extreme Ultraviolet and Beyond Extreme Ultraviolet Lithography Using Amorphous Zeolitic Imidazolate Resists Deposited by Atomic/Molecular Layer Deposition

Amorphous zinc-imidazolate (aZnMIm) resists show potential to meet the demands for next-generation high-numerical aperture (high-NA) metal-containing extreme ultraviolet (EUV) resist materials, given their ease of deposition by atomic/molecular layer deposition (ALD/MLD) at thicknesses of 20 nm and below. Here, this study demonstrates that aZnMIm thin films, previously identified as high-resolution electron beam resists, can also function as negative-tone EUV photoresists. Water development achieves high sensitivity (5 mJ/cm 2 ) but leaves significant residue, while acetic acid development results in poor contrast. A hybrid approach─water followed by acetic acid─enables residue-free development with a sensitivity of 181 mJ/cm 2 . Dry development using 1,1,1,5,5,5-hexafluoroacetylacetone (hfacH) is also possible but shows lower sensitivity (375 mJ/cm 2 ) compared to wet development methods. EUV photoelectron spectroscopy (PES), reflectometry/EUV absorption, total electron yield (TEY), residual gas analysis (RGA), and time-of-flight secondary ion mass spectrometry (TOF-SIMS) were used to investigate the effects of EUV irradiation on aZnMIm resists. Reflectometry experiments reveal an aZnMIm EUV absorption coefficient of 6.2 μm –1 , while PES and TEY analyses show that, compared to poly(4-hydroxystyrene) (PHS), a polymer-based reference resist, aZnMIm emits more primary and secondary electrons but generates fewer slow electrons relative to its primary electron emission; its total electron yield is similar to that of poly(methyl methacrylate) (PMMA) resists. When exposed to EUV, aZnMIm predominantly outgasses H 2 , as determined by RGA. TOF-SIMS measurements demonstrate that high-dose EUV exposure only partially fragments the 2-methylimidazole (2MIm) organic linkers, unlike high-dose electron beam exposure, which is known to completely degrade them. Additionally, aZnMIm resists show promise for potential beyond EUV lithography (BEUVL) due to the presence of Zn, which provides higher sensitivity at a wavelength of 6.7 nm compared to other metal ions, such as Sn, that are currently used in the best-performing EUV metal–organic resists. TEY measurements demonstrate that aZnMIm emits nearly twice as many electrons as PHS at 6.7 nm. The BEUV TEY of aZnMIm also surpasses that of PMMA, poly(pentafluorostyrene), and poly(4-iodostyrene), with the latter two being known for their high EUV TEYs. This work provides insight into zeolitic imidazolate framework (ZIF)-based EUV and BEUV resists and highlights their potential for both wet and dry development.

lithography↗
DOE OSTI2026

Mechanism of O 2 /NO-Promoted Oxidative C–C Bond Cleavage in Linear Alkanes

Selective oxidation of alkanes to oxygenated products remains a fundamental challenge, particularly if the goal is to promote C−C bond cleavage while minimizing formation of CO 2 . Oxidation conditions that use O 2 and nitrogen oxides (NO x ) have been shown to be very effective in promoting radical-mediated functionalization and oxidative carbon−carbon cleavage in saturated hydrocarbon polymers, such as polyethylene. Here, we investigate the mechanism of O 2 /NO-mediated oxidation of ndecane as a prototypical linear alkane substrate. These reactions enable identification and quantification of reactive intermediates, including nitrites, nitrates, alcohols, and ketones. Under the reaction conditions, these species convert into common ketone intermediates that evolve into α-diketones and other α-functionalized ketones, which undergo further conversion into carboxylic acids. Infrared (IR) spectroscopy indicates that HDPE oxidation proceeds through similar key intermediates. Together, these findings establish a mechanistic framework for NO x -mediated alkane oxidation and provide a foundation for the development of broadly applicable oxidative transformations.

Anions↗
DOE OSTI2023

Association between soil organic carbon and calcium in acidic grassland soils from Point Reyes National Seashore, CA

All data is collected from across 3 soil cores spanning a pH gradient at Point Reyes National Seashore, as part of a recent publication. The bulk data csv includes hygroscopic moisture content, soil pH, total C and N values, particle size distributions, cation exchange capacity and extractable cations. The STXM data package includes raw spectra data from scanning transmission X-ray microscopy C near-edge X-ray absorption fine structure spectroscopy analysis, extracted from STXM Image Reader analysis and then subsequently normalised in Athena (see details in paper). The data file also contains a bulk chemistry and mineralogy dataset, including total and trace element contents from 3 depths and mineral compositions as measured at BL 11-3 SSRL and semi-quantified in HighScore. Finally the final data file is calcium K-edge X-ray absorption near-edge structure spectroscopy (BL 4-3) and micro-XANES and micro-X-ray fluorescence (BL 14-3b) data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Controlled Acidity Gradients Enable CO 2 Reduction to Formic Acid (Not Formate) by Molecular Electrocatalysts

Neutral or basic conditions are commonly required for the selective electrochemical reduction of CO 2 , leading to the accumulation of carbonate salts and the generation of formate rather than formic acid. A generalizable strategy for obtaining formic acid (not formate) in the electroreduction of CO 2 with molecular catalysts is introduced, based on controlling acidity gradients using a dual-electrolyte cell with a proton-exchange membrane. This approach uses anodic water oxidation as the source of protons and electrons for CO 2 reduction to formic acid, while mitigating H 2 evolution near the cathode and avoiding carbonate formation. Mechanistic studies, including systems modeling, provide insight into the origin of the formic acid selectivity and guide the broader implementation of this strategy in molecular electrocatalysis for CO 2 utilization.

Alcohols↗
NASA NTRS1987

Organic geochemistry of sediments from the continental margin off southern New England, U.S.A.--Part I. Amino acids, carbohydrates and lignin

Total organic carbon (TOC), lignin, amino acids, sugars and amino sugars were measured in recent sediments for the continental margin off southern New England. The various organic carbon fractions decreased in concentration with increasing distance from shore. The fraction of the TOC that was accounted for by these major components also decreased with increasing distance from shore. The concentration of lignin indicated that only about 3-5% of the organic carbon in the nearshore sediment was of terrestrial origin. The various fractions were highly correlated, which was consistent with a simple linear mixing model of shelf organic matter with material form the slope and rise and indicated a significant transport of sediment from the continental shelf to the continental slope and rise.

Non-NASA Center↗
DOE OSTI2020

Binding of Formic Acid on Anatase TiO2(101)

The adsorption of formic acid (FA) and the formation of formate species on metal oxide surfaces are of great interest in catalysis. Formic acid is used to probe the adsorption properties of surface sites and formates are common intermediates in many catalytic reactions. Here we focus on the interaction of FA with a prototypical anatase TiO2(101) surface by using a combination of scanning tunneling microscopy (STM), infrared reflection absorption spectroscopy (IRAS), electron stimulated desorption (ESD), and density functional theory (DFT) to assess the coverage dependent evolution of different FA-derived surface species at low temperatures (80–240 K). We find that isolated FA adsorbs at 80 K in both monodentate (MD) and bidentate (BD) configurations on top of undercoordinated Ti sites (Ti5c). The MD form is likely deprotonated and readily converts upon annealing to bridging BD on two neighboring Ti5c sites. DFT calculations show that molecularly-bound MD FA is metastable and readily converts into a deprotonated state in the proximity of subsurface oxygen vacancy. The stability of the MD species increases as the availability of the paired Ti5c sites for BD formation diminishes at high coverages. Upon surface saturation, a mixed configuration of alternating bidentate and monodentate species with coverage of 2/3 FA/Ti5c represents the most favorable configuration. This is in contrast with the adsorption of FA on rutile TiO2(110) and many other oxides, where bidentate formate species dominate. Y.W., A.D., G.A.K., R.R., N.G.P., and Z.D. were supported by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences and Biosciences (CSGB) under FWP 47319. B.W. and A.S. acknowledge the support of DOE BES, CSGB Division under Award DESC0007347. The experimental studies were performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle. The authors also acknowledge computational resources from the TIGRESS high-performance computer center at Princeton University.

Wang, Yang↗
DOE OSTI2025

The Role of Surface Hydroxyls in Dehydration and Dehydrogenation of Formic Acid on Fe 3 O 4 (001)

Understanding the role of surface structure and hydroxylation in catalytic reactions on metal oxide surfaces is important for developing a mechanistic insight into the complex interface processes. Here, we investigate the reactivity of formic acid on reconstructed Fe 3 O 4 (001) using a combination of X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, temperature-programmed reaction spectroscopy, low energy electron diffraction, and electronic structure calculations. We find that formic acid initially dissociates at low temperatures (< 80 K) into bidentate formate and a hydroxyl up to an initial dosed coverage of two HCOOH per Fe 3 O 4 (001) unit cell. At higher temperatures (> 450 K), formate largely decomposes along the dehydration pathway, producing CO and H 2 O, with dehydrogenation to CO 2 being a minority side reaction. As a first step, water formation leads to surface oxygen extraction via the Mars-van Krevelen mechanism. Computational studies reveal formate embedded in oxygen vacancies as a key intermediate in the CO formation mechanism. CO formation proceeds via two reaction pathways with desorption that peaks at 530 K on the hydroxyl-rich surface and 560 K on the hydroxyl-deficient surface. Atomic hydrogen coadsorption experiments and ab initio calculations reveal that the presence of surface hydroxyls reduces the CO formation barrier. Furthermore, these results highlight the complex interactions between substrate and intermediate species occurring during reactions on metal oxide surfaces.

Adsorption↗
NASA NTRS2016

Effect of Atmospheric Organics on Bioavailable Fe Lifetime in the Oceans

The deposition of atmospheric aerosols is an important supply pathway of soluble iron (sol-Fe) to the global oceans influencing marine ecosystem processes and climate. Previous studies have shown that natural and anthropogenic acidic trace gases, when mixed with mineral dust, can lead to production of sol-Fe, leading to considerable increase in dust-Fe solubility. Recent studies have further highlighted the importance of atmospheric organic compounds/ligands in the production of sol-Fe during atmospheric transport and transformation of mineral aerosols. However, the actual scope of this aerosol sol-Fe for stimulating the primary productivity in the oceans is determined by both: the total atmospheric fluxes of sol-Fe and the lifetime of sol-Fe after its deposition to the ocean. In this study several atmospheric organic ligands were investigated for their effect on the lifetime of sol-Fe after mixing with seawater. Organic ligands were selected based on their abundance in the marine boundary layer and rainwater and their ability to form bidentate complexes with Fe. The results reveal that the tested organics had minor influence on Fe(II) lifetime in seawater. However, results also show that some organic acid considerably extended the lifetime of colloidal and aqueous Fe(III). Using these results we simulate aerosol sol-Fe lifetime in the ocean for different mineral dust deposition events in the presence and the absence of atmospheric organic ligands. The calculations suggest that when a large dust plume is assumed to contain Fe(II) alone, less than 15% of aerosol sol-Fe gets complexed with marine organic ligands. However, this fraction increases to over 90% when atmospheric Fe is allowed to bond with atmospheric organic acids prior to deposition to the oceans. Calculations also show that for the conditions when seawater organic ligands get titrated by Fe released from dust aerosol particles, retention of sol-Fe in the ocean depends on surface ocean mixing, i.e., replenishing rates for Fe-bonding ligands from below. This study suggests that in future ocean biogeochemistry models more attention should be devoted to better quantification of the role of atmospheric organic acids in the lifetime of aerosol sol-Fe after its deposition to the ocean and the improvements of upper ocean turbulence parameterizations.

Oceans↗
DOE OSTI2021

New Insights into Secondary Organic Aerosol Formation at the Air–Liquid Interface

Air-liquid interfacial processing of volatile organic compound oxidation has been suggested as an important source of secondary organic aerosols. However, owing to the lack of techniques for in situ air-liquid interface analysis, the detailed interfacial mechanism remains speculative. To obviate this, the analysis of air-liquid interfacial reactions and the dynamics of glyoxal oxidation as a model volatile organic compound using in situ liquid synchrotron-based vacuum ultraviolet single photon ionization mass spectrometry enabled by the system for analysis at the liquid vacuum interface microreactor is reported. This approach allows for determination of reaction intermediates and oxidation products including polymers and oligomers at the air-liquid interface by mass spectral analysis and appearance energy measurements. Furthermore, an expanded reaction mechanism of photooxidation free radical induced reactions as a source of aqueous secondary organic aerosol formation is proposed based on these new results, suggesting that single photon ionization could be applied to provide unique insights into interfacial chemistry changing the earth atmospheric composition.

aqueous secondary organic aerosol, glyoxal, photoo↗
DOE OSTI2020

Magnetic Tunability in RE-DOBDC MOFs via NO x Acid Gas Adsorption

The magnetic susceptibility of NO x -loaded RE-DOBDC (rare earth (RE): Y, Eu, Tb, Yb; DOBDC: 2,5-dihydroxyterephthalic acid) metal–organic frameworks (MOFs) is unique to the MOF metal center. RE-DOBDC samples were synthesized, activated, and subsequently exposed to humid NO x . Each NO x -loaded MOF was characterized by powder X-ray diffraction, and the magnetic characteristics were probed by using a VersaLab vibrating sample magnetometer (VSM). Lanthanide-containing RE-DOBDC (Eu, Tb, Yb) are paramagnetic with a reduction in paramagnetism upon adsorption of NO x . Y-DOBDC has a diamagnetic moment with a slight reduction upon adsorption of NO x . The magnetic susceptibility of the MOF is determined by the magnetism imparted by the framework metal center. The electronic population of orbitals contributes to determining the extent of magnetism and change with NO x (electron acceptor) adsorption. Eu-DOBDC results in the largest mass magnetization change upon adsorption of NO x due to more available unpaired f electrons. Experimental changes in magnetic moment were supported by density functional theory (DFT) simulations of NO x adsorbed in lanthanide Eu-DOBDC and transition metal Y-DOBDC MOFs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

(Photo)Electrocatalytic CO 2 Reduction at the Defective Anatase TiO 2 (101) Surface

Excessive carbon dioxide (CO 2 ) emissions by combustion of fossil fuels are linked to global warming and rapid climate change. One promising route to lowering the concentration of CO 2 in the atmosphere is to reduce it to useful small molecules via photoelectrocatalytic hydrogenation, which would enable solar energy storage with a zero-carbon emission cycle and perform a more efficient separation of the photogenerated electron and hole pair than pure photocatalysis. Indeed, photoelectrocatalytic CO 2 reduction has been an intense focus of research. Using the density functional theory (DFT), we studied the CO 2 reduction reaction on the defective anatase TiO 2 (101) surface, at both the solvent/catalyst and the electrolyte/catalyst interfaces. The analysis of the electronic structure of the surface shows a contrast between the solvent/catalyst and the electrolyte/catalyst interfaces, which results in the two corresponding catalytic cycles being distinct. Furthermore, our study explains at the electronic and mechanistic levels why methanol is the main product in the presence of the electrolyte and why the overpotential is not only controlled by the reaction process but also by the diffusion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemically Fueled Reinforcement of Polymer Hydrogels

Carbodiimide-fueled anhydride bond formation has been used to enhance the mechanical properties of permanently crosslinked polymer networks, giving materials that exhibit transitions from soft gels to covalently reinforced gels, eventually returning to the original soft gels. Temporary changes in mechanical properties result from a transient network of anhydride crosslinks, which eventually dissipate by hydrolysis. Over an order of magnitude increase in the storage modulus is possible through carbodiimide fueling. Here, the time-dependent mechanical properties can be modulated by the concentration of carbodiimide, temperature, and primary chain architecture. Because the materials remain rheological solids, new material functions such as temporally controlled adhesion and rewritable spatial patterns of mechanical properties have been realized.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Carbon optimized production of 3-hydroxypropionic acid in the Agile BioFoundry organism Rhodosporidium toruloides

The modern global economy relies heavily on carbon-based products that are derived from petroleum, which presents sustainability, resource management, and greenhouse gas exacerbated climate change challenges. Due to these challenges, there is the need for a global industrial transition towards green and sustainable production. Microbial production of valuable chemicals from renewable biomass represents one promising route. However, high-volume low-value products such as commodity chemicals are still difficult to make profitable. One fundamental bottleneck is a waste of more than 1/3 of the feedstock carbon as CO 2 in the fermentation process. Here the project focuses on fundamentally reconfiguring the metabolism to reduce CO 2 loss in central metabolic pathways thereby also improving bioproduct yields. Here we present technologies to prevent CO 2 loss and balance reducing equivalents within the cell to enable complete conversion of glucose from renewable feedstocks into bioproducts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗