Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Crystallographic and electronic evolution of lanthanum strontium ferrite (La 0.6 Sr 0.4 FeO 3-δ ) thin film and bulk model systems during iron exsolution

In this work, we study the changes in the crystallographic phases and in the chemical states during the iron exsolution process of lanthanum strontium ferrite (LSF, La 0.6 Sr 0.4 FeO 3-δ ). By using thin films of orthorhombic LSF, grown epitaxially on NaCl(001) and rhombohedral LSF powder, the materials gap is bridged. Furthermore, the orthorhombic material transforms into a fluorite structure after the exsolution has begun, which further hinders this process. Additionally, for the powder material, by a combination of in situ core level spectroscopy and ex situ neutron diffraction, we could directly highlight differences in the Fe chemical nature between surface and bulk: whereas the bulk contains Fe(IV) in the fully oxidized state, the surface spectra can be described perfectly by the sole presence of Fe(III). We also present corresponding magnetic and oxygen vacancy concentration data of reduced rhombohedral LSF that did not undergo a phase transformation to the cubic perovskite system based on neutron diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Anomalous Ferromagnetic Behavior in Orthorhombic Li 3 Co 2 SbO 6

Monoclinic Li 3 Co 2 SbO 6 has been proposed as a Kitaev spin liquid candidate and investigated intensively, whereas the properties of its polymorph, the orthorhombic phase, are less known. In this work, we report the magnetic properties of orthorhombic Li 3 Co 2 SbO 6 as revealed by dc and ac magnetic susceptibility, muon spin relaxation (μSR), and neutron diffraction measurements. Successive magnetic transitions at 115, 89, and 71 K were observed in the low-field dc susceptibility measurements. The transitions below T N (115 K) are suppressed at higher applied fields. However, zero-field ac susceptibility measurements reveal distinct frequency-independent transitions at about 114, 107, 97, 79, and 71 K. A long-range magnetic ordered state was confirmed by specific heat, μSR, and neutron diffraction measurements, all indicating a single transition at about 115 K. The discrepancy between different measurements is attributed to possible stacking faults and/or local disorders of the ferromagnetic zigzag chains, resulting in ferromagnetic boundaries within the overall antiferromagnetic matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Physical properties of intergrowth compound Eu 2 CuZn 2 P 3

Here, the physical properties of single-crystalline Eu 2 ⁢CuZn 2 ⁢P 3 were inspected via thermodynamic, transport, and neutron diffraction measurements. Eu 2 ⁢ CuZn 2⁢ P 3 is composed of EuCuP and EuZn 2 ⁢ P 2 motifs stacked in a one-to-one ratio. The magnetic response of Eu 2 ⁢ CuZn 2 ⁢ P 3 is similar to that of EuZn 2 ⁢ P 2 in its A-type antiferromagnetic (semiconducting) state. A Néel temperature of T N = 40.3K is obtained from the specific heat capacity. Single-crystal neutron diffraction reveals a (001) magnetic propagation vector, with primarily in-plane moments coupled along [001] in an up-up-down-down pattern. This spin structure retains the ferromagnetic EuCuP motifs and antiferromagnetic coupling across the EuZn 2 ⁢P 2 motifs. The electrical resistivity is characterized by metallic behavior above 100 K, an increase in ρ upon cooling below ≈ 75K, and a large negative magnetoresistance below T N . First principles calculations evidence a narrow band gap for antiferromagnetic ordering and semimetallic behavior for the ferromagnetic state. This is consistent with the observed effect of magnetic field on the electrical resistivity. Hall effect measurements reveal a field-induced, negative anomalous Hall effect that increases on cooling down to 2 K. Also, an unconventional contribution to the Hall effect dominates the low-field Hall signal, particularly near T N , and is similar in appearance to a topological Hall effect. However, further work is necessary to understand if any of the transport properties have topological origins or if magnetism-induced modifications to the Fermi surface induce these unusual Hall effect signals in this and related materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The “good,” the “bad,” and the “hidden” in neutron scattering and molecular dynamics of ionic aqueous solutions

We characterize a concentrated 7.3 m CaCl 2 solution, combining neutron diffraction with chloride isotopic substitution (Cl-NDIS) in null water and molecular dynamics (MD) simulations. We elucidate the solution structure, thermodynamic properties, and extent of ion pairing previously suggested as concentration-dependent and often not observed at lower concentrations. Our Cl-NDIS measurements designate the solvent-shared ion pairing as dominant and the contact ion pairing (CIP) as insignificant even under conditions close to the solubility limit. The MD models parameterized against neutron diffraction with calcium isotopic substitution (Ca-NDIS) overestimate CIP despite successfully reproducing most of the Cl-NDIS signal. This drawback originates from the fact that Ca 2+ –Cl - interactions were primarily “hidden” in the Ca-NDIS signal due to overlapping with Ca 2+ –O w and Ca 2+ –H w contributions to the total scattering. Contrary, MD models with moderate CIP and possessing generally good performance at high concentrations fail to reproduce the NDIS measurements accurately. Therefore, the electronic polarization, introduced in most of the recent MD models via scaling ionic charges, resolves some but not all parameterization drawbacks. We conclude that despite improving the quality of MD models “on average,” the question “which model is the best” has not been answered but replaced by the question “which model is better for a given research.” An overall “good” model can still be inappropriate or, in some instances, “bad” and, unfortunately, produce erroneous results. Additionally, the accurate interpretation of several NDIS datasets, complemented by MD simulations, can prevent such mistakes and help identify the strengths, weaknesses, and convenient applications for corresponding computational models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings

Nickel-base superalloys are conventionally aged in order to develop a favorable microstructure as well as to relieve residual stresses. In this work, neutron diffraction was used to follow the evolution of residual stress during aging in Inconel 718 and Udimet 720LI for the first time by a combination of in situ and ex situ measurements. First, the quench-induced stress profiles were determined for different geometries of Inconel 718 forgings confirming that the amplitude of stress is not significantly affected by the thickness of the component. It was followed by in situ residual stress analysis using neutron diffraction during aging/annealing treatments at 650 °C, 720 °C, and 750 °C. Almost 90 pct of stress relaxation was found to occur primarily during heating to the aging temperature as a result of a combination of plasticity and early-stage creep relaxation. Creep-like stress relaxation was observed to evolve at a diminishing rate during the isothermal treatment of Inconel 718 at 720 °C and 750 °C, while no further stress relaxation occurred at 650 °C. This means that a change in hold temperature might have a more immediate impact on stress relaxation than a change in duration of heat treatment. Finally, the post-aging ex situ measurements showed that a heat treatment at 750 °C for 8 hours reduced the stresses by approximately 70 pct in Inconel 718. By comparison, when heat treating Udimet 720LI in the same way only a 20 pct stress reduction was observed, which is explained by the higher creep resistance of this alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Hole doping and antiferromagnetic correlations above the Néel temperature of the topological semimetal (Sr 1-x K x )MnSb 2

Neutron diffraction and magnetic susceptibility studies of orthorhombic single crystal (Sr 0.97 K 0.03 )MnSb 2 confirm the three-dimensional (3D) C-type antiferromagnetic (AFM) ordering of the Mn 2+ moments at TN=305±3 K, which is slightly higher than that of the parent SrMnSb 2 with T N =297±3 K. Susceptibility measurements of the K-doped and parent crystals above T N are characteristic of 2D AFM systems. This is consistent with high-temperature neutron diffraction of the parent compound that displays persisting 2D AFM correlations well above T N to at least ~560 K with no evidence of a ferromagnetic phase. Analysis of the de Haas–van Alphen magnetic oscillations of the K-doped crystal is consistent with hole doping.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Successive magnetic orderings in the Ising spin chain magnet DyNi 5 Ge 3

In this report, we investigated a new rare-earth-based one-dimensional Ising spin chain magnet DyNi 5 Ge 3 by means of magnetization, specific heat, and powder neutron diffraction measurements. Due to the crystalline electrical field splitting, the magnetic Dy ions share an Ising-like ground doublet state. Owning to the local point symmetry, these Ising moments form into two canted magnetic sublattices, which were further confirmed by the angle-dependent magnetization measurement. In zero fields, two successive antiferromagnetic phase transitions were found at temperatures T N1 =6K and T N2 =5K, respectively. Only part of the moments are statically ordered in this intermediate state between T N1 and T N2 . Powder neutron diffraction experiments at different temperatures were performed as well. Further, an incommensurate magnetic propagation vector of k m =(0.5,0.4,0.5) was identified. The refined spin configurations through the irreducible representation analysis confirmed that these Ising spins are canted in the crystal ab plane.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A new mathematical approach to finding global solutions of the magnetic structure determination problem

Abstract Determination of magnetic structure is an important analytical procedure utilized in various fields ranging from fundamental condensed-matter physics and chemistry to advanced manufacturing. It is typically performed using a neutron diffraction technique; however, finding global solutions of the magnetic structure optimization problem represents a significant challenge. Generally, it is not possible to mathematically prove that the obtained magnetic structure is a truly global solution and that no solution exists when no acceptable structure is found. In this study, the global optimization technique called semidefinite relaxation of quadratic optimization, which has attracted much interest in the field of applied mathematics, is proposed to use as a new analytical method for the determination of magnetic structure, followed by the application of polarized neutron diffraction data. This mathematical approach allows avoiding spurious local solutions, decreasing the amount of time required to find a tentative solution and finding multiple solutions when they exist.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Lithium-Ion Mobility in Layered Oxide Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 Containing Lithium on both Intra and Inter‐Stack Positions

With the aid of neutron diffraction and electrochemical impedance spectroscopy, we have demonstrated the effect of the increase in lithium concentration and distribution on Li-ion conductivity. This has been done through the synthesis of a layered oxide Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 , with the so-called Ruddlesden-Popper type structure, where bilayer stacks of (Ta/Ti)O 6 octahedra are separated by lithium ions, located in inter-stack spaces. There are also intra-stack spaces that are occupied by a mixture of La and Li, as confirmed by neutron diffraction. The distribution of lithium over both inter- and intra-stack positions leads to the enhancement of Li-ion conductivity in Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 compared to Li 2 La(TaTi)O 7 , which has a lower concentration of lithium ions, located only in inter-stack spaces. Furthermore, the analyses of real and imaginary components of electrochemical impedance data confirm the enhanced mobility of ions in Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 . While the Li-ion conductivity needs further improvement for practical applications, the success of the strategy implemented in this work offers a useful methodology for the design of layered ionic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High-order harmonics and the reverse of the squaring up process in the triangular-lattice magnet HoPdAl 4 ⁢Ge 2

We uncover high-order harmonics and the reverse of the squaring-up process, in terms of analyzing the evolution of magnetic orders in a centrosymmetric layered triangular-lattice magnet HoPdAl 4 ⁢Ge 2 , based on a detailed study of the crystal structure, magnetic susceptibility, magnetization, heat capacity, and magnetic structure. Temperature dependencies of magnetic susceptibility and heat capacity show two magnetic transitions at T N = 10.5 K and T t = 5.5 K. Below T N , Ho 3+ spins order antiferromagnetically as a transverse spin-density wave with the propagation vector k 1 = (001.5 – δ) with δ ≈ 0.18. Upon further cooling through T t , the high-order harmonics with k n = (001.5 – nδ), n = 3, 5, 7 develop, suggesting a squaring-up process. It is surprising that the squaring-up process does not continue down to 0 K but reverses the trend below 3 K. Magnetic-field-induced metastable transitions were observed in M⁡(H) curves with the fields applied both parallel and perpendicular to the triangular-lattice plane. Neutron-diffraction results suggest that the magnetization process in HoPdAl 4 ⁢Ge 2 involves the conversion of k n = (001.5 – n⁢δ) with n = 1, 3, 5, 7, to a ferromagnetic k F = (000) component. It is worth noting that the already weak seventh harmonic magnetic peak is enhanced by applying a small magnetic field in the ab plane at 1.5 K or warming up to 3 K, accompanied by a slight decrease of δ.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Helical antiferromagnetic ordering in EuNi 1.95 As 2 single crystals

The Eu + 2 spins-7/2 in EuNi 2 As 2 with the body-centered tetragonal ThCr 2 Si 2 structure order antiferromagnetically below the Néel temperature T N = 15 K into a helical antiferromagnetic (AFM) structure with the helix axis aligned along the tetragonal c axis and the Eu ordered moments aligned ferromagnetically within the ab plane as previously reported from neutron diffraction measurements [T. Jin et al., Phys. Rev. B 99, 014425 (2019)]. Here we study the crystallographic, magnetic, thermal, and electronic transport properties of Bi-flux-grown single crystals using single-crystal x-ray diffraction, anisotropic magnetic susceptibility χ, isothermal magnetization M, heat capacity Cp, and electrical resistivity ρ measurements versus applied magnetic field H and temperature T. Vacancies are found on the Ni sites corresponding to the composition EuNi 1.95 (1) As 2. A good fit of the ρ (T) data by the Bloch-Grüneisen theory for metals was obtained. The χab (T) data below T N are fitted well by molecular field theory (MFT), and the helix turn angle kd and the Eu-Eu Heisenberg exchange constants are extracted from the fit parameters. The kd value is in good agreement with the neutron-diffraction result. The magnetic contribution to the zero-field heat capacity below T N is also fitted by MFT. The isothermal in-plane magnetization M ab exhibits two metamagnetic transitions versus H, whereas M c (T = 2 K ) is nearly linear up to H = 14 T, both behaviors being consistent with MFT. The M c (H, T) , ρ(H c , T) , and Cp (H c , T) data yielded a H c - T phase diagram separating the AFM and paramagnetic phases in good agreement with MFT. Anisotropic χ(T) literature data for the ThCr 2 Si 2 -type helical antiferromagnet EuRh 2 As 2 were also fitted well by MFT. A comparison is made between the crystallographic and magnetic properties of ThCr 2 Si 2 -type Eu M 2 Pn 2 compounds with M = Fe , Co, Ni, Cu, or Rh, and Pn = P or As, where only ferromagnetic and c -axis helical AFM structures are found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Mechanical behavior and texture evolution of WE43 magnesium-rare earth alloy in Split-Hopkinson Pressure Bar and Taylor Impact Cylinder Testing

Mechanical behavior and texture evolution of Mg rare-earth alloy WE43 is investigated for strain-rates 10 -3 /s to upwards of 10 5 /s for the two material conditions - as-cast (AC) and T6 age hardened, rolled plate (RT6). The high strain-rate behavior is tested using both Taylor cylinder impact tests (TC) and split Hopkinson pressure bar tests (SHB) and bulk textures are obtained using neutron diffraction. Unlike the quasi-static strained material, AC and RT6 SHB retained high hardening rates throughout the test, even up to 30% true strain. Moreover, the high strain-rate data revealed that the RT6 material has a much higher strength than the AC material, but similar hardening rates despite significantly different initial texture. The flow stress near yield increased up to I 0% for RT6 and up to 30% for AC as the strain-rate increased six orders of magnitude from quasi-static rates 10 -3 /s to 10 3 /s. Neither material exhibited significant plastic anisotropy over the broad range of strain rates, despite the fact that the RT6 material had a moderately strong initial texture. In the TC tests, the geometric cross-sectional changes and texture along the cylinder from the cylindrical sample foot to head are measured and from the neutron diffraction texture analysis, upper-bound estimates of twin volume fraction are obtained as well as dislocation density from analyzing diffraction peak broadening. Recorded geometrical changes along several loading directions show that the material has deformed remarkably homogeneously under impact. Analysis of deformed textures indicates that {101¯2} extension deformation twinning occurred in the RT6 condition over the range of strain rates, with an upper bound estimate of 40% twin volume fraction for approximately 0.10-0.25 true strain. The peak texture components after the impact have their c-axes closely aligned with the impact direction. As a result, these observations are presented and rationalized in the paper.

42 ENGINEERING↗
NASA NTRS2012

Deformation and Phase Transformation Processes in Polycrystalline NiTi and NiTiHf High Temperature Shape Memory Alloys

The deformation and transformation mechanisms of polycrystalline Ni49.9Ti50.1 and Ni50.3Ti29.7Hf20 (in at.%) shape memory alloys were investigated by combined experimental and modeling efforts aided by an in situ neutron diffraction technique at stress and temperature. The thermomechanical response of the low temperature martensite, the high temperature austenite phases, and changes between these two states during thermomechanical cycling were probed and reported. In the cubic austenite phase, stress-induced martensite, deformation twinning and slip processes were observed which helped in constructing a deformation map that contained the limits over which each of the identified mechanisms was dominant. Deformation of the monoclinic martensitic phase was also investigated where the microstructural changes (texture, lattice strains, and phase fractions) during room-temperature deformation and subsequent thermal cycling were compared to the bulk macroscopic response. When cycling between these two phases, the evolution of inelastic strains, along with the shape setting procedures were examined and used for the optimization of the transformation properties as a function of deformation levels and temperatures. Finally, this work was extended to the development of multiaxial capabilities at elevated temperatures for the in situ neutron diffraction measurements of shape memory alloys on the VULCAN Diffractometer at Oak Ridge National Laboratory.

Benafan, Othmane↗
DOE OSTI2019

Signatures of low-dimensional magnetism and short-range spin fluctuations in Co-based trirutiles

Features of low dimensional magnetism resulting from a square-net arrangement of Co atoms in trirutile CoTa2O6 is studied in the present work by means of density functional theory and is compared with the experimental results of specific heat and neutron diffraction. The small total energy differences between the ferromagnetic (FM) and antiferromagnetic (AFM) configuration of CoTa2O6 shows that competing magnetic ground states exist, with the possibility of transition from FM to AFM phase at low temperature. Our calculation further suggests the semi-conducting behavior for CoTa2O6 with a band gap of ~0.41 eV. The calculated magnetic anisotropy energy is ~2.5 meV with its easy axis along the [100] (in-plane) direction. Studying the evolution of magnetism in Co1-xMgxTa2O6 (x = 0, 0.1, 0.3, 0.5, 0.7 and 1). it is found that the sharp AFM transition exhibited by CoTa2O6 at TN = 6.2 K in it’s heat capacity vanishes with Mg-dilution, indicating the obvious effect of weakening the superexchange pathways of Co. The current specific heat study reveals the robust nature of TN for CoTa2O6 in applied magnetic fields. Clear indication of short-range magnetism is obtained from the magnetic entropy, however, diffuse components are absent in neutron diffraction data. At TN , CoTa2O6 enters a long-range ordered magnetic state which can be described using a propagation vector, ( 1 1 0). Upon Mg-dilution at x =0.1, the long-range ordered magnetism is destroyed. The present results should motivate an investigation of magnetic excitations in this low-dimensional anisotropic magnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Residual stresses in Cu matrix composite surface deposits after laser melt injection

Abstract Tungsten carbide particles reinforced metal matrix composite (MMC) coatings can significantly improve surface wear resistance owing to their increased surface hardness. However, the presence of macro‐ and micro‐residual stresses in MMC coatings can have detrimental effects, such as reducing service life. In this study, neutron diffraction was used to determine the residual stresses in spherical fused tungsten carbide (sFTC) reinforced Cu matrix composite surface deposits after laser melt injection. We also developed a thermo‐mechanical coupled finite element model to predict residual stresses. Our findings reveal that sFTC/Cu composite deposits produced with a preheating temperature of 400°C have low residual stresses, with a maximum tensile residual stress of 98 MPa in the Cu matrix on the top surface. In contrast, the sFTC/bronze (CuAl10Ni5Fe4) composite deposit exhibits very high residual stresses, with a maximum tensile residual stress in the Cu matrix on the top surface reaching 651 MPa. These results provide a better understanding of the magnitudes and distributions of residual stresses in sFTC‐reinforced Cu matrix composite surface deposits manufactured via laser melt injection.

Zhang, Xingxing↗
NASA NTRS2016

A Computationally-Efficient, Multi-Mechanism Based Framework for the Comprehensive Modeling of the Evolutionary Behavior of Shape Memory Alloys

The report summarizes the accomplishments made during the 4-year duration of the project. Here, the major emphasis is placed on the different tasks performed by the two research teams; i.e., the modeling activities by the University of Akron (UA) team and the experimental and neutron diffraction studies conducted by the University of Central Florida (UCF) team, during this 4-year period. Further technical details are given in the upcoming sections by UA and UCF for each of the milestones/years (together with the corresponding figures and captions).The project majorly involved the development, validation, and application of a general theoretical model that is capable of capturing the nonlinear hysteretic responses, including pseudoelasticity, shape memory effect, rate-dependency, multi-axiality, asymmetry in tension versus compression response of shape memory alloys. Among the targeted goals for the SMA model was its ability to account for the evolutionary character response (including transient and long term behavior under sustained cycles) for both conventional and high temperature (HT) SMAs, as well as being able to simulate some of the devices which exploit these unique material systems. This required extensive (uniaxial and multi-axial) experiments needed to guide us in calibrating and characterizing the model. Moreover, since the model is formulated on the theoretical notion of internal state variables (ISVs), neutron diffraction experiments were needed to establish the linkage between the micromechanical changes and these ISVs. In addition, the design of the model should allow easy implementation in large scale finite element application to study the behavior of devices making use of these SMA materials under different loading controls. Summary of the activities, progress/achievements made during this period is given below in details for the University of Akron and the University (Section 2.0) of Central Florida (Section 3.0).

Alloys↗
DOE OSTI2019

Spin Stripe Order in a Square Planar Trilayer Nickelate.

Trilayer nickelates, which exhibit a high degree of orbital polarization combined with an electron count (d(8.67)) corresponding to overdoped cuprates, have been identified as a promising candidate platform for achieving high-T-c superconductivity. One such material, La4Ni3O8, undergoes a semiconductor-insulator transition at similar to 105 K, which was recently shown to arise from the formation of charge stripes. However, an outstanding issue has been the origin of an anomaly in the magnetic susceptibility at the transition and whether it signifies the formation of spin stripes akin to single layer nickelates. Here we report single crystal neutron diffraction measurements (both polarized and unpolarized) that establish that the ground state is indeed magnetic. The ordering is modeled as antiferromagnetic spin stripes that are commensurate with the charge stripes, the magnetic ordering occurring in individual trilayers that are essentially uncorrelated along the crystallographic c axis. A comparison of the charge and spin stripe order parameters reveals that, in contrast to single-layer nickelates such as La2-xSrxNiO4 as well as related quasi-2D oxides including manganites, cobaltates, and cuprates, these orders uniquely appear simultaneously, thus demonstrating a stronger coupling between spin and charge than in these related low-dimensional correlated oxides.

Zhang, Junjie↗