Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Native Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Potential Use of In Situ Material Composites such as Regolith/Polyethylene for Shielding Space Radiation

NASA has an extensive program for studying materials and methods for the shielding of astronauts to reduce the effects of space radiation when on the surfaces of the Moon and Mars, especially in the use of in situ materials native to the destination reducing the expense of materials transport. The most studied material from the Moon is Lunar regolith and has been shown to be as efficient as aluminum for shielding purposes (1). The addition of hydrogenous materials such as polyethylene should increase shielding effectiveness and provide mechanical properties necessary of structural materials (2). The neutron radiation shielding effectiveness of polyethylene/regolith stimulant (JSC-1A) composites were studied using confluent human fibroblast cell cultures exposed to a beam of high-energy spallation neutrons at the 30deg-left beam line (ICE house) at the Los Alamos Neutron Science Center. At this angle, the radiation spectrum mimics the energy spectrum of secondary neutrons generated in the upper atmosphere and encountered when aboard spacecraft and high-altitude aircraft. Cell samples were exposed in series either directly to the neutron beam, within a habitat created using regolith composite blocks, or behind 25 g/sq cm of loose regolith bulk material. In another experiment, cells were also exposed in series directly to the neutron beam in T-25 flasks completely filled with either media or water up to a depth of 20 cm to test shielding effectiveness versus depth and investigate the possible influence of secondary particle generation. All samples were sent directly back to JSC for sub-culturing and micronucleus analysis. This presentation is of work performed in collaboration with the NASA sponsored Center for Radiation Engineering and Science for Space Exploration (CRESSE) at Prairie View A&M.

Theriot, Corey A.↗
NASA NTRS2015

Python-Based Scientific Analysis and Visualization of Precipitation Systems at NASA Marshall Space Flight Center

At NASA Marshall Space Flight Center (MSFC), Python is used several different ways to analyze and visualize precipitating weather systems. A number of different Python‐based software packages have been developed, which are available to the larger scientific community. The approach in all these packages is to utilize pre‐existing Python modules as well as to be object‐oriented and scalable. The first package that will be described and demonstrated is the Python Advanced Microwave Precipitation Radiometer (AMPR) Data Toolkit, or PyAMPR for short. PyAMPR reads geolocated brightness temperature data from any flight of the AMPR airborne instrument over its 25‐year history into a common data structure suitable for user‐defined analyses. It features rapid, simplified (i.e., one line of code) production of quick‐look imagery, including Google Earth overlays, swath plots of individual channels, and strip charts showing multiple channels at once. These plotting routines are also capable of significant customization for detailed, publication‐ready figures. Deconvolution of the polarization‐varying channels to static horizontally and vertically polarized scenes is also available. Examples will be given of PyAMPR's contribution toward real‐time AMPR data display during the Integrated Precipitation and Hydrology Experiment (IPHEx), which took place in the Carolinas during May‐June 2014. The second software package is the Marshall Multi‐Radar/Multi‐Sensor (MRMS) Mosaic Python Toolkit, or MMM‐Py for short. MMM‐Py was designed to read, analyze, and display three‐dimensional national mosaicked reflectivity data produced by the NOAA National Severe Storms Laboratory (NSSL). MMM‐Py can read MRMS mosaics from either their unique binary format or their converted NetCDF format. It can also read and properly interpret the current mosaic design (4 regional tiles) as well as mosaics produced prior to late July 2013 (8 tiles). MMM‐Py can easily stitch multiple tiles together to provide a larger regional or national picture of precipitating weather systems. Composites, horizontal and vertical crosssections, and combinations thereof are easily displayed using as little as one line of code. MMM‐Py can also write to the native MRMS binary format, and sub‐sectioning of tiles (or multiple stitched tiles) is anticipated to be in place by the time of this meeting. Thus, MMM‐Py also can be used to power the creation of custom mosaics for targeted regional studies. Overlays of other data (e.g., lightning observations) are easily accomplished. Demonstrations of MMM‐Py, including the creation of animations, will be shown. Finally, Marshall has done significant work to interface Python‐based analysis routines with the U.S. Department of Energy's Py‐ART software package for radar data ingest, processing, and analysis. One example of this is the Python Turbulence Detection Algorithm (PyTDA), an MSFC‐based implementation of the National Center for Atmospheric Research (NCAR) Turbulence Detection Algorithm (NTDA) for the purposes of convective‐scale analysis, situational awareness, and forensic meteorology. PyTDA exploits Py‐ART's radar data ingest routines and data model to rapidly produce aviation‐relevant turbulence estimates from Doppler radar data. Work toward processing speed optimization and better integration within the Py‐ART framework will be highlighted. Python‐based analysis within the Py‐ART framework is also being done for new research related to intercomparison of ground‐based radar data with satellite estimates of ocean winds, as well as research on the electrification of pyrocumulus clouds.

Lang, Timothy J.↗
DOE OSTI2025

Effects of pH on potassium sulfite based alkali pretreatment of corn stover under mild conditions

Sulfite salt-based alkali pretreatment is increasingly recognized as an effective method for biomass pretreatment under mild temperature conditions. However, the effects of pH on the pretreatment process are not yet fully understood. In this study, the pretreatment of corn stover using potassium sulfite (KS) combined with aqueous ammonia (AA) at 80 °C was investigated within a pH range of 9–14. Results demonstrated that high pH environment established by combining KS with AA is critical for enhancing sulfonation modifications, effectively removing lignin, facilitating deacetylation, and significantly improving the total sugar yield. For example, when comparing KS alone at pH 9.7, AA alone at pH 13, and KS combined with AA at pH 13, the delignification rates were 13.82 %, 67.71 %, and 71.27 %, respectively; the deacetylation rates were 25.84 %, 81.19 %, and 82.54 %, respectively; and the total sugar yields were 24.85 %, 78.96 %, and 92.12 %, respectively. The X-ray photoelectron spectroscopy (XPS) results confirmed that sulfonation reactions occurred under low-temperature and high pH conditions, leading to enhanced delignification efficiency. Results also showed that the cellulase adsorption, water retention, and the enzymatic digestibility of the pretreated solids increased along with rising pH. Moreover, nuclear magnetic resonance (NMR) analysis revealed that KS-based alkali pretreatment retained more β-O-4 native bonds in the pretreated lignin-rich hydrolysate than alkali pretreatment alone did, providing promising opportunities for the subsequent upgrading of lignin into high-value products.

09 BIOMASS FUELS↗
DOE OSTI2022

Controlling Catalyst–Semiconductor Contacts: Interfacial Charge Separation in p-InP Photocathodes

Charge-carrier-selective interfaces between electrocatalyst particles and semiconductor light absorbers are critical for solar photochemistry but controlling their properties is challenging. Using thin films and nanoparticle arrays of Pt hydrogen-evolution catalysts on p-InP (a high-performance photocathode material), along with macroscopic and nanoscopic electrical and chemical analysis, we show how hydrogen alloying, the pinch-off effect for nanoscale contacts, and the formation of a native surface oxides all play different roles in creating charge-carrier-selective junctions. As a result, the new insights can be broadly applied to photocathodes, photoanodes, and overall water-splitting systems to control charge-carrier selectivity and improve performance.

14 SOLAR ENERGY↗
DOE OSTI2023

Bioexcitons by Design: How Do We Get There?

Biological pigment-protein complexes (PPCs) exhibit a remarkable ability to tune the optical properties of biological excitons (bioexcitons) through specific pigment-protein interactions. While such fine-tuning allows natural systems (e.g., photosynthetic proteins) to carry out their native functions with near-optimal performance, native function itself is often suboptimal for applications such as biofuel production or quantum technology development. Furthermore, this perspective offers a look at near-term prospects for the rational reoptimization of PPC bioexcitons for new functions using site-directed mutagenesis. The primary focus is on the "structure-spectrum" challenge of understanding the relationships between structural features and spectroscopic properties. While recent examples demonstrate that site-directed mutagenesis can be used to tune nearly all key bioexciton parameters (e.g., site energies, inter-pigment couplings, and electronic-vibrational interactions), critical challenges remain before we achieve truly rational design of bioexciton properties.

09 BIOMASS FUELS↗
DOE OSTI2023

Using Grover’s search protocol to select the best qubit pairs

This research represents a continuation of our investigation of the Rigetti quantum platform as part of the Quantum Leap for Fusion Energy Sciences project. We evaluate the performance of the new Aspen-11, Aspen-M-2, Aspen-M-3 quantum processing units (QPU) through the application of the Grover’s search algorithm and the validation of single gate fidelities. The performance of the new QPUs is compared to the older Aspen-7 device, and it is shown that qubit pair selection plays a key role in the optimization process. Additionally, we delve into the examination of coherent and decoherent errors associated with native gates. To optimize our approach, we have developed several relatively inexpensive hardware protocols aimed at facilitating the selection of the most suitable qubit pairs. These protocols involve running various circuits on the hardware and assessing the overall performance of the tested qubit pairs. Through these protocols, we have demonstrated that the quality of qubit pairs on a single chip can exhibit significant variations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Liquid Copper and Iron Production from Chalcopyrite, in the Absence of Oxygen

Clean energy infrastructure depends on chalcopyrite: the mineral that contains 70% of the world’s copper reserves, as well as a range of precious and critical metals. Smelting is the only commercially viable route to process chalcopyrite, where the oxygen-rich environment dictates the distribution of impurities and numerous upstream and downstream unit operations to manage noxious gases and by-products. However, unique opportunities to address urgent challenges faced by the copper industry arise by excluding oxygen and processing chalcopyrite in the native sulfide regime. Through electrochemical experiments and thermodynamic analysis, gaseous sulfur and electrochemical reduction in a molten sulfide electrolyte are shown to be effective levers to selectively extract the elements in chalcopyrite for the first time. We present a new process flow to supply the increasing demand for copper and byproduct metals using electricity and an inert anode, while decoupling metal production from fugitive gas emissions and oxidized by-products.

36 MATERIALS SCIENCE↗
NASA NTRS2015

Free-Energy Calculations. A Mathematical Perspective

Ion channels are pore-forming assemblies of transmembrane proteins that mediate and regulate ion transport through cell walls. They are ubiquitous to all life forms. In humans and other higher organisms they play the central role in conducting nerve impulses. They are also essential to cardiac processes, muscle contraction and epithelial transport. Ion channels from lower organisms can act as toxins or antimicrobial agents, and in a number of cases are involved in infectious diseases. Because of their important and diverse biological functions they are frequent targets of drug action. Also, simple natural or synthetic channels find numerous applications in biotechnology. For these reasons, studies of ion channels are at the forefront of biophysics, structural biology and cellular biology. In the last decade, the increased availability of X-ray structures has greatly advanced our understanding of ion channels. However, their mechanism of action remains elusive. This is because, in order to assist controlled ion transport, ion channels are dynamic by nature, but X-ray crystallography captures the channel in a single, sometimes non-native state. To explain how ion channels work, X-ray structures have to be supplemented with dynamic information. In principle, molecular dynamics (MD) simulations can aid in providing this information, as this is precisely what MD has been designed to do. However, MD simulations suffer from their own problems, such as inability to access sufficiently long time scales or limited accuracy of force fields. To assess the reliability of MD simulations it is only natural to turn to the main function of channels - conducting ions - and compare calculated ionic conductance with electrophysiological data, mainly single channel recordings, obtained under similar conditions. If this comparison is satisfactory it would greatly increase our confidence that both the structures and our computational methodologies are sufficiently accurate. Channel conductance, defined as the ratio of ionic current through the channel to applied voltage, can be calculated in MD simulations by way of applying an external electric field to the system and counting the number of ions that traverse the channel per unit time. If the current is small, a voltage significantly higher than the experimental one needs to be applied to collect sufficient statistics of ion crossing events. Then, the calculated conductance has to be extrapolated to the experimental voltage using procedures of unknown accuracy. Instead, we propose an alternative approach that applies if ion transport through channels can be described with sufficient accuracy by the one-dimensional diffusion equation in the potential given by the free energy profile and applied voltage. Then, it is possible to test the assumptions of the equation, recover the full voltage/current dependence, determine the reliability of the calculated conductance and reconstruct the underlying (equilibrium) free energy profile, all from MD simulations at a single voltage. We will present the underlying theory, model calculations that test this theory and simulations on ion conductance through a channel that has been extensively studied experimentally. To our knowledge this is the first case in which the complete, experimentally measured dependence of the current on applied voltage has been reconstructed from MD simulations.

free energy↗
DOE OSTI2021

A Transient-Response methodology based on experiments and modeling for Cu-Redox Half-Cycle kinetic analysis on a Cu-SSZ-13 SCR catalyst

In this report the Standard SCR reaction catalyzed by Cu-SSZ-13 is a redox process consisting of a reduction half cycle (RHC) and an oxidation half cycle (OHC) that cycle the active Cu sites between the Cu(II) and Cu(I) states. In the current work, a transient-response methodology consisting of experimental transient response Cu-redox (TRCR) measurements and kinetic modeling was developed for detailed study of individual SCR Cu-redox half cycles. The TRCR protocol allows quantification of the reducible Cu density, Cu(II)-Cu(I) partitioning, relative native RHC and OHC rates, and limiting half cycle during SCR. The half-cycle kinetics are studied over a wide (170–450 °C) temperature, and in differential segments along the catalyst length using spatially resolved capillary inlet mass-spectrometry (SpaciMS). The protocol alone provides two independent measures indicating that OHC increases faster than RHC with temperature, and that at all but the lowest temperature SCR is RHC limited. Introducing the transient kinetic models allows half-cycle reaction pathways, orders and activation energies to be studied and determined; e.g., RHC involves surface and gas-phase NH 3 routes, and OHC with O 2 involves dimer formation. Application of the full methodology provides further confirmation and quantification of the protocol conclusions, and specifically the first measurements of RHC and OHC activation energies; specifically for parallel RHC surface and gas-phase routes, and experimentally obtained OHC activation energy vs. first-principle calculations in the literature. Beyond insights related to the degreened catalyst studied here, the methodology provides a broadly available approach for quantifying how aging processes selectively impact RHC and OHC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Non-terrestrial resources of economic importance to earth

The status of research on the importation of energy and nonterrestrial materials is reviewed, and certain specific directions for new research are proposed. New technologies which are to be developed include aerobraking, in situ propellant production, mining and beneficiation of extraterresrrial minerals, nuclear power systems, electromagnetic launch, and solar thermal propulsion. Topics discussed include the system architecture for solar power satellite constellations, the return of nonterrestrial He-3 to earth for use as a clean fusion fuel, and the return to earth of platinum-group metal byproducts from processing of nonterrestrial native ferrous metals.

Lewis, John S.↗
DOE OSTI2021

Pacific Northwest National Laboratory Annual Site Environmental Report for Calendar Year 2020. Final Report

The U.S. Department of Energy requires that all its site facilities develop an annual site environmental report to comply with DOE Order 231.1B, Chg 1, and DOE Order 458.1, Admin Chg 4. This report provides a synopsis of calendar year 2020 information related to environmental management performance and compliance efforts at Pacific Northwest National Laboratory. It summarizes site compliance with federal, state, and local environmental laws, regulations, policies, directives, permits, and Orders, and provides environmental management performance benchmarks and their status to the public, regulatory agencies, community officials, Native American tribes, and public interest groups.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Enhanced Interfacial Stability of Si Anodes for Li-Ion Batteries via Surface SiO2 Coating

Silicon is a promising alloying anode for lithium-ion batteries owing to its high capacity and low cost. However, its use has been hampered by mechanical failure arising from the large volume change upon cycling and by an insufficiently stable solid-electrolyte interphase (SEI). SEI formation depends on the Si surface, which is often an oxide (SiO x ). In this study we compare three different Si surfaces using Si wafers: 1.3 nm native SiO x , 1.4 nm thermally grown SiO2, and a SiOx-free surface. The oxide-free surface showed the worst electrochemical performance, never exceeding 94% Coulombic efficiency (CE). Furthermore, it also exhibited the thickest SEI and the highest overpotential for lithiation, which correlated with uninhibited electrolyte reduction and the incorporation of P-F species into the SEI. The oxide-coated surfaces performed significantly better, demonstrating a CE above 99% beyond the second cycle, low overpotential for lithiation, and a thinner and more stable SEI. The oxides lower the onset potential for electrolyte reduction, and yield an SEI with fewer P-F species. However, it was found that the CE with the native oxide surface decays from the fifth cycle onwards and correlates with a resurgence of electrolyte reduction. A 1-2 nm thermal SiO 2 coating is optimum for achieving a stable SEI that minimizes side reactions and sustains efficient cycling.

25 ENERGY STORAGE↗
DOE OSTI2021

Covalent Functionalization of Nickel Phosphide Nanocrystals with Aryl-Diazonium Salts

Covalent functionalization of Ni 2 P nanocrystals was demonstrated using aryl-diazonium salts. Spontaneous adsorption of aryl functional groups was observed, with surface coverages ranging from 20 to 96% depending on the native reactivity of the salt as determined by the aryl substitution pattern. Increased coverage was possible for low reactivity species using a sacrificial reductant. Functionalization was confirmed using thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The structure and energetics of this nanocrystal electrocatalyst system, as a function of ligand coverage, were explored with density functional theory calculations. The Hammett parameter of the surface functional group was found to linearly correlate with the change in Ni and P core-electron binding energies and the nanocrystal's experimentally and computationally determined work function. The electrocatalytic activity and stability of the functionalized nanocrystals for hydrogen evolution were also improved when compared to the unfunctionalized material, but a simple trend based on electrostatics was not evident. Density functional theory was used to understand this discrepancy, revealing that H adsorption energies on the covalently functionalized Ni 2 P also do not follow the electrostatic trend and are predictive descriptors of the experimental results.

14 SOLAR ENERGY↗
DOE OSTI2021

Tuning of lattice oxygen reactivity and scaling relation to construct better oxygen evolution electrocatalyst

Developing efficient and low-cost electrocatalysts for oxygen evolution reaction is crucial in realizing practical energy systems for sustainable fuel production and energy storage from renewable energy sources. However, the inherent linear scaling relation for most catalytic materials imposes a theoretical overpotential ceiling, limiting the development of efficient electrocatalysts. Herein, using modeled Na x Mn 3 O 7 materials, we report an effective strategy to construct better oxygen evolution electrocatalyst through tuning both lattice oxygen reactivity and scaling relation via alkali metal ion mediation. Specifically, the number of Na + is linked with lattice oxygen reactivity, which is determined by the number of oxygen hole in oxygen lone-pair states formed by native Mn vacancies, governing the barrier symmetry between O–H bond cleavage and O–O bond formation. On the other hand, the presence of Na + could have specific noncovalent interaction with pendant oxygen in *OOH to overcome the limitation from linear scaling relation, reducing the overpotential ceiling. Combining in situ spectroscopy-based characterization with first-principles calculations, we demonstrate that an intermediate level of Na + mediation (NaMn 3 O 7 ) exhibits the optimum oxygen evolution activity. This work provides a new rational recipe to develop highly efficient catalyst towards water oxidation or other oxidative reactions through tuning lattice oxygen reactivity and scaling relation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pacific Northwest National Laboratory Annual Site Environmental Report for Calendar Year 2021 (Final Report)

The U.S. Department of Energy requires that all its site facilities develop an annual site environmental report to comply with DOE Order 231.1B Chg 1 and DOE Order 458.1 Admin Chg 4. This report provides a synopsis of calendar year 2021 information related to environmental management performance and compliance efforts at the Pacific Northwest National Laboratory. It summarizes site compliance with federal, state, and local environmental laws, regulations, policies, directives, permits, and Orders, and provides environmental management performance benchmarks and their status to the public, regulatory agencies, community officials, Native American tribes, and public interest groups.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

4-Clique network minor embedding for quantum annealers

Quantum annealing is a quantum algorithm for computing solutions to combinatorial optimization problems. This study proposes a method for minor embedding optimization problems onto sparse quantum annealing hardware graphs called 4-clique network minor embedding. This method is in contrast to the standard minor embedding technique of using a path of linearly connected qubits in order to represent a logical variable state. The 4-clique minor embedding is possible on Pegasus graph connectivity, which is the native hardware graph for some of the current D-Wave quantum annealers. The Pegasus hardware graph contains many cliques of size 4, making it possible to form a graph composed entirely of paths of connected 4-cliques on which a problem can be minor-embedded. The 4-clique chains come at the cost of additional qubit usage on the hardware graph, but they allow for stronger coupling within each chain, thereby increasing chain integrity, reducing chain breaks, and allow for greater usage of the available energy scale for programming logical problem coefficients on current quantum annealers. The 4-clique minor embedding technique is compared with the standard linear path minor embedding with experiments on two D-Wave quantum annealing processors with Pegasus hardware graphs. We show proof-of-concept experiments where the 4-clique minor embeddings can use weak chain strengths while successfully carrying out the computation of minimizing random all-to-all spin glass problem instances. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Bacterial α-diglucoside metabolism: perspectives and potential for biotechnology and biomedicine

In a competitive microbial environment nutrient acquisition is a major contributor to the survival of any individual bacterial species, and the ability to access uncommon energy sources can provide a fitness advantage. One set of soluble carbohydrates that have attracted increased attention for use in biotechnology and biomedicine are the α-diglucosides. Maltose is the most well studied member of this class, however the remaining four less common α-diglucosides (trehalose, kojibiose, nigerose, and isomaltose) are increasingly used in processed food and fermented beverages. The consumption of trehalose has recently been shown to be a contributing factor in gut microbiome disease as certain pathogens are using α-diglucosides to outcompete native gut flora. Kojibiose and nigerose have also been examined potential prebiotics and alternative sweeteners for a variety of foods. Compared to the study of maltose metabolism our understanding of the synthesis and degradation of uncommon α-diglucosides is lacking and several fundamental questions that remain unanswered, particularly in regards to the regulation of bacterial metabolism for α-diglucosides. Therefore this minireview attempts to provide a focused analysis of uncommon α-diglucoside metabolism in bacteria, and suggests some future directions for this research area that could potentially accelerate biotechnology and biomedicine developments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Unveiling the nanoscale architectures and dynamics of protein assembly with in situ atomic force microscopy

Proteins play a vital role in different biological processes by forming complexes through precise folding with exclusive inter- and intra-molecular interactions. Understanding the structural and regulatory mechanisms underlying protein complex formation provides insights into biophysical processes. Furthermore, the principle of protein assembly gives guidelines for new biomimetic materials with potential applications in medicine, energy, and nanotechnology. Atomic force microscopy (AFM) is a powerful tool for investigating protein assembly and interactions across spatial scales (single molecules to cells) and temporal scales (milliseconds to days). It has significantly contributed to understanding nanoscale architectures, inter- and intra-molecular interactions, and regulatory elements that determine protein structures, assemblies, and functions. This review describes recent advancements in elucidating protein assemblies with in situ AFM. We discuss the structures, diffusions, interactions, and assembly dynamics of proteins captured by conventional and high-speed AFM in near-native environments and recent AFM developments in the multimodal high-resolution imaging, bimodal imaging, live cell imaging, and machine-learning-enhanced data analysis. These approaches show the significance of broadening the horizons of AFM and enable unprecedented explorations of protein assembly for biomaterial design and biomedical research.

36 MATERIALS SCIENCE↗