Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Minnesota”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Observations of differential charging effects on ATS 6

Differential charging effects observed in the electron data of the University of California, San Diego, auroral particles experiment on Applied Technology Satellite 6 are described and analyzed. An electrostatic barrier around the environmental measurements experiment (EME) package on ATS 6 is shown to be the natural result of dielectrics around the spacecraft which are more negatively charged than the mainframe of the spacecraft. In particular, the large dish antenna on ATS 6 causes the formation of a barrier which traps particles emitted from the EME package surface and returns them to the spacecraft. The insulating surface of the rotating University of Minnesota detector on the otherwise conducting EME package is shown to be the source of accelerated fluxes of electrons during charging events.

Olsen, R. C.↗
NASA NTRS1980

Transition year labeling error characterization study

Labeling errors made in the large area crop inventory experiment transition year estimates by Earth Observation Division image analysts are identified and quantified. The analysis was made from a subset of blind sites in six U.S. Great Plains states (Oklahoma, Kansas, Montana, Minnesota, North and South Dakota). The image interpretation basically was well done, resulting in a total omission error rate of 24 percent and a commission error rate of 4 percent. The largest amount of error was caused by factors beyond the control of the analysts who were following the interpretation procedures. The odd signatures, the largest error cause group, occurred mostly in areas of moisture abnormality. Multicrop labeling was tabulated showing the distribution of labeling for all crops.

Clinton, N. J.↗
NASA NTRS1981

AgRISTARS: Supporting research. US crop calendars in support of the early warning project

The crop calendars produced for the Large Area Crop Inventory Experiment (LACIE) and crop calendar samples for Colorado, Iowa, Kansas, Minnesota, Montana, Nebraska, North Dakota, South Dakota, and Texas are presented. These calendars are based on weekly crop reporting district level observations of the percentage of various crops at several growth stages. A sample of the statistical treatments of the weekly data is provided. Four to five years of 50-percent dates for stages on a crop reporting district level for Arkansas, Iowa, Kentucky, Louisiana, Michigan, Mississippi, Ohio and Wisconsin are also given.

Hodges, T.↗
NASA NTRS1981

AgRISTARS: Supporting research. Spring small grains planting date distribution model

A model was developed using 996 planting dates at 51 LANDSAT segments for spring wheat and spring barley in Minnesota, Montana, North Dakota, and South Dakota in 1979. Daily maximum and minimum temperatures and precipitation were obtained from the cooperative weather stations nearest to each segment. The model uses a growing degree day summation modified for daily temperature range to estimate the beginning of planting and uses a soil surface wetness variable to estimate how a fixed number of planting days are distributed after planting begins. For 1979, the model predicts first, median, and last planting dates with root mean square errors of 7.91, 6.61, and 7.09 days, respectively. The model also provides three or four dates to represent periods of planting activity within the planting season. Although the full model was not tested on an independent data set, it may be suitable in areas other than the U.S. Great Plains where spring small grains are planted as soon as soil and air temperatures become warm enough in the spring for plant growth.

Hodges, T.↗
NASA NTRS1980

Evaluation of the procedure for separating barley from other spring small grains

The success of the Transition Year procedure to separate and label barley and the other small grains was assessed. It was decided that developers of the procedure would carry out the exercise in order to prevent compounding procedural problems with implementation problems. The evaluation proceeded by labeling the sping small grains first. The accuracy of this labeling was, on the average, somewhat better than that in the Transition Year operations. Other departures from the original procedure included a regionalization of the labeling process, the use of trend analysis, and the removal of time constraints from the actual processing. Segment selection, ground truth derivation, and data available for each segment in the analysis are discussed. Labeling accuracy is examined for North Dakota, South Dakota, Minnesota, and Montana as well as for the entire four-state area. Errors are characterized.

Magness, E. R.↗
NASA NTRS1982

Selection of USSR foreign similarity regions

The similarity regions in the United States and Canada were selected to parallel the conditions that affect labeling and classification accuracies in the U.S.S.R. indicator regions. In addition to climate, a significant condition that affects labeling and classification accuracies in the U.S.S.R. is the proportion of barley and wheat grown in a given region (based on sown areas). The following regions in the United States and Canada were determined to be similar to the U.S.S.R. indicator regions: (1) Montana agrophysical unit (APU) 104 corresponds to the Belorussia high barley region; (2) North Dakota and Minnesota APU 20 and secondary region southern Manitoba and Saskatchewan correspond to the Ural RSFSR barley and spring wheat region; (3) Montana APU 23 corresponds to he North Caucasus barley and winter wheat region. Selection criteria included climates, crop type, crop distribution, growth cycles, field sizes, and field shapes.

Disler, J. M.↗
NASA NTRS1981

Monitoring land conversions from forest/wetland to agriculture

The utility of LANDSAT data in monitoring largescale land clearance and drainage activities in a forest/wetland environment in northern Minnesota was investigated. LANDSAT tapes from 1973, 1978 and 1980 were used in a multitemporal unsupervised land cover classification of the 9 x 15 mile site. Results show quite clearly and in a cost-effective manner, where the greatest activity occurred. It was also possible to integrate the LANDSAT data with other data available through the Land Management Information Center's geographic information system.

Dudding, M. L.↗
NASA NTRS1983

Integration of environmental and spectral data for sunflower stress determination

Stress in sunflowers was assessed in western and northwestern Minnesota. Weekly ground observations (acquired in 1980 and 1981) were analyzed in concert with large scale aerial photography and concurrent LANDSAT data. Using multidate supervised and unsupervised classification procedures, it was found that all crops grown in association with sunflowers in the study area are spectrally separable from one another. Under conditions of extreme drought, severely stressed plants were differentiable from those not severely stressed, but between-crop separation was not possible. Initial regression analyses to estimate sunflower seed yield showed a sensitivity to environmental stress during the flowering and seed development stages. One of the most important biological factors related to sunflower production in the Red River Valley area was found to be the extent and severity of insect infestations.

Lillesand, T.↗
NASA NTRS1983

Fundamental research data base

A fundamental research data base was created on a single 9-track 1600 BPI tape containing ground truth, image, and Badhwar profile feature data for 17 North Dakota, South Dakota, and Minnesota agricultural sites. Each site is 5x6 nm in area. Image data has been provided for a minimum of four acquisition dates for each site. All four images have been registered to one another. A list of the order of the files on tape and the dates of acquisition is provided.

Source record↗
NASA NTRS1983

Fundamental research data base

A fundamental research data base containing ground truth, image, and Badhwar profile feature data for 17 North Dakota, South Dakota, and Minnesota agricultural sites is described. Image data was provided for a minimum of four acquisition dates for each site and all four images were registered to one another.

Source record↗
NASA NTRS1983

The function and response of an improved stratospheric condensation nucleus counter

An improved condensation nucleus counter (CNC) for use in the stratosphere is described. The University of Minnesota CNC (UMCNC) has a sequential saturator and condenser and uses n-butyl alcohol as the working fluid. The use of a coaxial saturator flow, with aerosol in the center and filtered, alcohol-laden air around it, speeds the response of this instrument and improves its stability as pressure changes. The counting efficiency has been studied as a function of particle size and pressure. The UMCNC provides an accurate measure of submicron aerosol concentration as long as the number distribution is not dominated by sub-0.02 micron diameter aerosol. The response of the UMCNC is compared with that of other stratospheric condensation nucleus counters, and the results of a (near) comparison with a balloon-borne condensation nucleus counter are presented. The UMCNC has operated 14 times on a NASA U-2 aircraft at altitudes from 8 to 21.5 km.

Wilson, J. C.↗
NASA NTRS1984

Steady viscous flow past a circular cylinder

Viscous flow past a circular cylinder becomes unstable around Reynolds number Re = 40. With a numerical technique based on Newton's method and made possible by the use of a supercomputer, steady (but unstable) solutions have been calculated up to Re = 400. It is found that the wake continues to grow in length approximately linearly with Re. However, in conflict with available asymptotic predictions, the width starts to increase very rapidly around Re = 300. All numerical calculations have been performed on the CDC CYBER 205 at the CDC Service Center in Arden Hills, Minnesota.

Fornberg, B.↗
NASA NTRS1984

Data compression techniques for astronomy

The photometric and astrometric accuracy of the Minnesota automated dual-plate scanner is summarized. The relation between magnitude and isophotometric image diameter is linear on Schmidt plates over a large useful range. Results of a study of centroid measurement accuracy and image classification ability of parameters derived from both densitometric and isophotometric scanning techniques are presented. The data analyzed for this purpose are synthesized ideal star and galaxy brightness distributions with appropriate random noise added to simulate plate grain and sky background effects. A preliminary study of image classification using real plates and single isophote data finds that a parameter describing the raggedness of the isophote may be useful in distinguising stars from galaxies.

Landau, R.↗
NASA NTRS1984

Techniques of isophotometry

The expected performance of the Minnesota automated dual-plate scanner (APS) is discussed with regard to photometry, position measurement accuracy, and ability to classify images. In addition, a fast algorithm for calculating image parameters is described.

Ghigo, F. D.↗
NASA NTRS1984

Habitability of the Earth

Test methods to measure land vegetation biomass, net biological production and leaf area index by remote sensing are applied to estimate the biomass and net biological productivity of selected biomes, including the boreal forests and north temperate grasslands. Field verification is conducted in conjunction with remote sensing of pertinent variables and the development of a data base of relevant material initiated. Measurements are made in the Superior National Forest, Minnesota with the following remote sensing instruments: (1) an airborne 8 band Barnes radiometer; (2) the thematic mapper simulator flown in a NASA C-130 aircraft; (3) MSS data from LANDSAT 3; and (4) AVHRR data from the NOAA Satellite. Vegetation data collected as field verification in the Superior National Forest is summarized.

Botkin, D. B.↗
NASA NTRS1984

Spectral characterization of biophysical characteristics in a boreal forest: Relationship between Thematic Mapper band reflectance and leaf area index for Aspen

Results from analysis of a data set of simultaneous measurements of Thematic Mapper band reflectance and leaf area index are presented. The measurements were made over pure stands of Aspen in the Superior National Forest of northern Minnesota. The analysis indicates that the reflectance may be sensitive to the leaf area index of the Aspen early in the season. The sensitivity disappears as the season progresses. Based on the results of model calculations, an explanation for the observed relationship is developed. The model calculations indicate that the sensitivity of the reflectance to the Aspen overstory depends on the amount of understory present.

Badhwar, G.↗
NASA NTRS1984

Comparison of full-scale engine and subscale model performance of a mixed flow exhaust system for an energy efficient engine (E3) propulsion system

A full scale engine test of the NASA/General Electric Company (GE) Energy Efficient Engine (E3) was conducted to demonstrate the E3 engine concept and evaluate its performance. The test program, performed at the GE outdoor engine test facilities in Peebles, OH, included a detailed evaluation of the total pressure and temperature profiles at the exit of the mixed flow exhaust system to determine its mixing effectiveness. Subscale model tests of the same mixed flow exhaust system had been previously conducted at FluiDyne Engineering Corporation in Minneapolis, Minnesota as part of the GE E3 mixer aerodynamic technology development program. The scale model and full scale engine nozzle exit survey data and the calculated mixing effectiveness are compared and discussed. Results indicate the full scale engine mixing effectiveness to be five percent higher than the scale model as a result of a geometric difference and higher turbulence levels in the engne exhaust flowfield.

Kuchar, A. P.↗
NASA NTRS1984

Steady state stresses in ribbon parachute canopies

An experimental study of the steady state stresses in model ribbon parachute canopies is presented. The distribution of circumferential stress was measured in the horizontal ribbons of two parachutes using Omega sensors. Canopy pressure distributions and overall drag were also measured. Testing was conducted in the University of Minnesota Low-Speed Wind Tunnel at dynamic pressures ranging from 1.0 to 1.5 inches of water. The stresses in the parachute canopies were calculated using the parachute structural analysis code, CANO. It was found that the general shape of the measured and calculated stress distributions was fairly similar; however, the measured stresses were somewhat less than the calculated stresses.

Garrard, W. L.↗