Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Chrome-free qandilite (Mg 2 TiO 4 ) refractory aggregates: Role of titania source and evaluation of thermal expansion coefficient

As used chrome-based refractories may contain toxic Cr 6+ , the chrome-free Mg 2 TiO 4 phase is being considered which is known to improve hot strength and resistance to thermal shock and slag corrosion. As in situ Mg 2 TiO 4 formation generates porosity, preformed aggregates are desirable. Dilatometric studies revealed that when dead burned magnesia is combined with industrial anatase instead of rutile, it expanded less (1% versus 7.2%) and the reaction occurred earlier (965°C compared to 1120°C). After sintering at 1,600°C, rutile produced an aggregate with 3.8% open porosity, whereas anatase led to 0 % porosity and a bulk density of 3.24g/cm 3 with a thermal expansion coefficient (70–1,600°C) of 13.5×10 -6 K -1 . Moreover, replacing rutile by anatase eliminates the undesirable MgTiO 3 phase. The anatase-based aggregate consisted of a Mg 2 TiO 4 matrix with residual unreacted MgO and an intergranular, refractory CaTiO 3 phase. In conclusion, the rutile-based aggregate was deemed unsuitable due to a low-melting microstructure of forsterite contiguous with CaTiO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Formation of I 1 stacking fault by deformation defect evolution from grain boundaries in Mg

I 1 stacking faults (SFs) in Mg alloys are regarded as the nucleation sites of $\langle \text{c+a} \rangle$ dislocations that are critical for these alloys to achieve high ductility. Previously it was proposed that the formation of I 1 SFs requires the accumulations of a large number of vacancies, which are difficult to achieve at low temperatures. In this study, molecular dynamics (MD) and molecular statics (MS) simulations based on empirical interatomic potentials were applied to investigate the deformation defect evolutions from the symmetric tilt grain boundaries (GBs) in Mg and Mg-Y alloys under external loading along $\langle c \rangle$-axis. The results show the planar faults (PFs) on Pyramidal I planes first appear due to the nucleation and glide of $\langle {\frac {1}{2}}c + p\rangle$ partial dislocations from GBs, where $\langle p\rangle$ = ${\frac {1}{3}} \langle10\bar{1}0\rangle$. These partial dislocations with pyramidal PFs interact with other defects, including pyramidal PFs themselves, GBs, and $\langle p\rangle$ partial dislocations, generating a large amount of I 1 SFs. Detailed analyses show the nucleation and growth of I 1 SFs are achieved by atomic shuffle events and deformation defect reactions without the requirements of vacancy diffusion. Our simulations also suggest the Y clusters at GBs can reduce the critical stress for the formation of pyramidal PFs and I 1 SFs, which provide a possible reason for the experimental observations that Y promotes the $\langle{\text{c+a}}\rangle$ dislocation activities.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effects of Sn addition on precipitation of Al–Zn–Mg alloy at early stage of natural aging

The effect of Sn addition on the natural aging behavior of Al–Zn–Mg alloy was investigated using atom probe tomography (APT) experiments and density functional theory (DFT) calculations. The results demonstrate that Sn retards the natural aging behavior by facilitating the preferential formation of Mg–Sn clusters, which suppress the formation of Guinier-Preston zones (I) during the earliest aging stage. Quantitative solute analysis conducted by APT has suggested increasing amount of Mg–Sn clusters in Sn-contained alloy due to their high binding energy, supported by DFT calculations on the Sn.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the exceptionally high ductility of Mg–2Zn-0.3Ca-0.2Ce-0.1Mn alloy

A newly developed Mg–2Zn-0.3Ca-0.2Ce-0.1Mn (in weight %, ZXEM2000) wrought alloy exhibits an exceptionally high tensile ductility (29% ± 1.4% tensile elongation) along the rolling direction at room temperature. In this work, we investigated the fundamental plastic deformation mechanisms that can contribute to the high ductility of ZXEM2000. Scanning electron microscopy and transmission electron microscopy were carried out at selected strain levels to characterize the microstructural evolution. Compared with the deformed microstructures from the hot-rolled pure Mg and Mg–3Al–1Zn alloy at similar conditions, our results revealed that the high ductility of ZXEM2000 could be attributed to four key factors: weaker texture, fine grain size, reduced twinning, and increased cross-slip frequency of < c +a > dislocation. Furthermore, these direct observations offer a key insight into improving ductility of magnesium alloys for future alloy design and development.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The subsurface structure of abraded Al–Zn–Mg–Cu alloy

Surface abrasion has been shown to introduce heavy shear stress and produce a few hundred nanometers thick altered surface layer (ASL) on Al alloys. Such ASLs exhibit microstructural changes at room temperature and different corrosion resistance than the underlying substrate. Here, we report how sample dimensions and temperature affect the deformed subsurface microstructure evolution on an abraded Al–Zn–Mg–Cu alloy using transmission electron microscopy (TEM) and atom probe tomography. The ASL microstructure evolves differently in the bulk sample than in the thin TEM specimen. In the freshly abraded ASL, the original η'/η precipitates and grain boundaries were deformed toward the abrasion direction. After 7-day natural aging of the freshly abraded bulk sample, well-defined subgrains formed locally in the ASL, and unusual Al 2 Cu (θ) and Mg x Zn y phases precipitated at the subgrain boundaries. However, during natural aging of this TEM specimen taken from the abraded and aged bulk samples, much faster changes occurred, including the continued formation of subgrains and θ particles in the entire ASL, and the diffusion of Zn atoms out of Mg x Zn y particles to form a Zn particle. On the other hand, no obvious microstructural changes occurred in the ASL during 3-month natural aging of the TEM specimen immediately taken from the freshly abraded sample. Finally, this work advances the understanding of how Al alloy microstructures respond during and following any shear deformation, and complex and unexpected effects of sample dimensions on the behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ionic Dynamics of the Charge Carrier in Layered Solid Materials for Mg Rechargeable Batteries

Multivalent-ion batteries have attracted growing attention due to their high theoretical energy density that potentially outperforms Li-ion batteries. One of the critical challenges of realizing a multivalent-ion battery is the strong polarization that results in the sluggish intercalation of ions in the host lattice, which motivates a fundamental understanding of multivalent-ion dynamics in solid-state materials. In this contribution, we investigate the diffusion mechanisms of divalent ions in a novel Mg anode coating, BiOCl, using first-principles informed learning-on-the-fly molecular dynamics. Based on nanosecond-scale dynamics observations, we gained insights into the concerted diffusion mechanism of Mg cation site-to-site hopping facilitated by synchronous anion rotational motion. Furthermore, we compute the Mg-ion diffusion in additional candidate host structures screened from available layered materials space. Here, the results suggest the co-operative divalent cation-anion motion is likely a common phenomenon in layered oxyhalide structures. Our findings provide a new perspective on how to enhance multivalent-ion diffusion in layered materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Surface and Bulk Stabilization of Silicon Anodes with Mixed-Multivalent Additives: Ca(TFSI) 2 and Mg(TFSI) 2

Here, silicon is drawing attention as the upcoming anode material for the next generation of lithium-ion batteries due to its higher capacity compared to commercial graphite. However, silicon anions formed during lithiation are highly reactive with binder and electrolyte components creating an unstable SEI layer and limiting the calendar life of silicon anodes. The reactivity of lithium silicide and the formation of an unstable SEI layer is mitigated by utilizing the use of a mixture of Ca and Mg multivalent cations as an electrolyte additive for Si anodes to improve their calendar life. The effect of mixed salts on the bulk and surface of silicon anodes was studied by multiple structural characterization techniques. Ca and Mg ions in the electrolyte formed relatively thermodynamically stable quaternary Li-Ca-Mg-Si Zintl phases in an in-situ fashion and more stable and denser SEI layer on the Si particles. These in turn protect silicon particles against side reactions with electrolytes in a coin cell. The full cell with the mixed cation electrolyte demonstrates enhanced calendar life performance with lower measured current and current leakage than that of the baseline electrolyte due to reduced side reactions. Electron Microscopy, HRXRD, and solid-state NMR results showed that electrodes with mixed cations tended to have less cracking on the electrode surface compared to Si electrodes with Gen2 + FEC and the presence of mixed cations enhances cation migration and formation of quaternary Zintl phases stabilizing bulk and forming a more stable SEI.

25 ENERGY STORAGE↗
DOE OSTI2025

Ab Initio Structures and Energetics of Hydrated Flat and Terrace-Step Surfaces of Forsterite (Mg 2 SiO 4 )

Forsterite (Mg 2 SiO 4 ), a model divalent metal silicate mineral, has been extensively studied in the context of mineral carbonation. Although dissolution is a key step in this process, the mechanisms by which forsterite dissolves under high CO 2 conditions remain poorly understood. Atomistic simulations could aid in exploring these mechanisms, but it is essential first to understand the structures and energetics of the relevant forsterite surfaces. We present an ab initio study of the structure and surface energy at 0 K of the flat $(010), (110), (001), (111), (021), (101)$ and $(120)$ faces of forsterite using the density functional PBE Hamiltonian and a plane-wave basis set. Dry surfaces became stabilized upon hydration through the formation of bonds between surface Mg and O from water, as well as by the formation of hydrogen bonds. According to surface energy values, the stability order of the hydrated forsterite faces was found to be $(120) < (101) < (021) < (111) < (001) < (110) < (010)$. We also investigated the energetics of the terrace-step $(0\bar{41})$ surface as a model site for forsterite dissolution. Among all the facets, the $(0\bar{41})$ surface is the least stable termination in water. Hydration of Mg atoms on the $(0\bar{41})$ surface increases their susceptibility to dissolution. The presence of a step and its hydration destabilizes the terraces, making step retreat more likely than a dissolution front advancing along the [010] direction. This research will support future simulations to investigate forsterite dissolution in water under CO 2 -rich conditions.

PBE Hamiltonian↗
DOE OSTI2023

Morphology Evolution in Self-Healing Liquid-Gallium-Based Mg-Ion Battery Anode

Conventional solid battery anodes suffer from dendrite growth and volume changes, resulting in poor cycling performances. Self-healing electrodes made of liquid metals and alloys can overcome these issues by reversibly undergoing liquid–solid phase transformations during (dis)charging. Just recently, we achieved 1000 cycles in Mg-ion battery anodes using liquid Ga as the active material, which reversibly transformed into solid Mg 2 Ga 5 during (de)magnesiation. However, the fundamental mechanism behind this liquid–solid phase transformation remains unclear. In this follow-up work, cryogenic focused ion beam electron microscopy is used to elucidate the morphology evolution when liquid Ga embedded in a carbon-binder matrix transforms into solid Mg 2 Ga 5 during cycling. We found that liquid Ga gradually diffuses into the surrounding matrix, increasing the contact area between active material and electrolyte, facilitating the charge transfer process. These new insights will help understand the performance of alkali- and alkaline-earth-metal batteries based on liquid anodes.

25 ENERGY STORAGE↗
DOE OSTI2025

Reactive Capture and Conversion of Carbon Dioxide to Methanol with ZnZrO 2 and Alkali-Promoted Mg 3 AlO x Mixed Oxide Catalytic Sorbents

Reactive capture and conversion (RCC) explores the use of a single-unit process to capture CO 2 and produce a product, in this case, methanol (MeOH). In this study, different configurations of a catalytic sorbent (CS) composed of ZnZrO 2 catalyst and Mg 3 AlO x sorbent with and without alkali modification are evaluated for CO 2 adsorption, steady-state catalysis with cofed CO 2 and H 2 , and transient RCC performance. A catalyst composed of a physical mixture of Mg 3 AlO x with ZnZrO 2 resulted in a slight increase in CO 2 uptake, with a low impact on the catalytic activity and RCC of the materials compared to ZnZrO 2 alone. In contrast, Na impregnation significantly increased the level of CO 2 uptake from 0.28 mmol/g (ZnZrO 2 alone) to 0.6 and 1.1 mmol/g for the CS with Na on the catalyst or Mg 3 AlO x , respectively. However, Na impregnation reduced the CO 2 conversion rate and MeOH selectivity during steady-state cofeed experiments at 300 °C and 6 bar. In contrast to steady-state catalysis conditions, RCC, which is a cyclic capture and conversion process, creates dynamic CO 2 and H 2 surface coverages, favoring CH 4 in the early stages of the conversion step and then CO and MeOH as the catalyst CO 2 coverage reduces. The highest MeOH productivity during RCC was achieved with CS that balanced the CO 2 uptake with only moderate catalyst rate reductions caused by Na addition. The optimal material, ZnZrO 2 +10%Na/Mg 3 AlO x , achieved a CO 2 uptake of 0.8 mmol/g and a MeOH productivity of 0.5 mmol/g with 100% selectivity at 260 °C and 6 bar during RCC. This marks the highest RCC MeOH productivity reported to date, although the process needs further optimization and even with optimization, may remain impractical. The results further demonstrate that optimization of catalytic sorbents under steady-state flow conditions does not easily correlate to transient capture and conversion cycles for methanol synthesis from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fluoroarene Separations in Metal-Organic Frameworks with Two Proximal Mg 2+ Coordination Sites

Fluoroarenes which are widely used in medicinal, agricultural, and materials chemistry, and yet their production remains a critical challenge in organic synthesis. Indeed, the nearly identical physical properties of these vital building blocks hinders their purification by traditional methods, such as flash chromatography or distillation. As a result, the Balz-Schiemann reaction is currently employed to prepare fluoroarenes instead of more atom-economical C-H fluorination reactions, which produce inseparable mixtures of regioisomers. Herein, we propose an alternative solution to this problem: the purification of mixtures of fluoroarenes using metal-organic frameworks (MOFs). Specifically, we demonstrate that controlling the interaction of fluoroarenes with adjacent coordinatively unsaturated Mg 2+ centers within a MOF enables the separation of fluoroarene mixtures with unparalleled selectivities. Liquid-phase multicomponent equilibrium adsorption data and breakthrough measurements coupled with van der Waals-corrected density functional theory calculations reveal that the materials Mg 2 (dobdc) (dobdc 4- = 2,5-dioxidobenzene-1,4-dicarboxylate) and Mg 2 ( m -dobdc) ( m -dobdc 4- = 2,4-dioxidobenzene-1,5-dicarboxylate) are capable of separating the difluorobenzene isomers from one another. Additionally, these frameworks facilitate the separations of fluoroanisoles, fluorotoluenes, and fluorochlorobenzenes. In addition to enabling currently unfeasible separations for the production of fluoroarenes, our results suggest that carefully controlling the interaction of isomers with not one but two strong binding sites within a MOF provides a general strategy for achieving challenging liquid-phase separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Interfacial reaction during friction stir assisted scribe welding of immiscible Fe and Mg alloy system

We report on interfacial characteristics and chemistry of bonded Mg-Fe interfaces welded using friction stir assisted scribe technique (FaST). Two pairs of dissimilar joints: (AZ31-DP590) and (Pure Mg-DP590) were studied to shed light on joining mechanisms responsible for bonding of “immiscible” pairs of Mg and Fe. We present first direct experimental evidence of presence of oxide layer, Al segregation by atom probe tomography and nano steel grains close to interface by transmission electron microscopy study.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Conjugation effect of amine molecules in non-aqueous Mg redox flow batteries

Nonaqueous magnesium redox flow batteries (Mg RFBs) are attractive for low-cost, high-energy-density and long-cycle-life stationary energy storage applications. However, state-of-the-art cathode redox-active molecules suffer from low solubility and low redox potential. Herein, we screened a range of cathode redox-active molecules and identified amine molecules as optimal to couple with the Mg anode. The properties of amine derivatives and their performances were collected to establish the correlation between molecular structures and electrochemical performances. The redox potential and solubility of these amine molecules were influenced by the π-conjugated and non-conjugated structures of amine derivatives. Density functional theory (DFT) simulations and the inverse aromatic fluctuation index (FLU −1 ) verified that conjugation had an important role in stabilizing the molecule and increasing its redox potential. Notably, tris[4-(diethylamino)phenyl]amine (TDPA) achieved the highest theoretical energy density (∼120 Wh L −1 ) due to its high solubility (∼0.9 M) and voltage (∼2.5 V vs. Mg/Mg 2+ ). We also demonstrated that ether solvents were crucial for stable, high-solubility catholytes, while bulk anions did not affect the redox potential of these p-type molecules. In a Mg-amine RFB configuration, the battery delivered 2.50 V, a specific discharge capacity of 106.5 mAh g −1 , an initial coulombic efficiency of 90.74%, and a capacity retention of 93.88% after 150 cycles.

Qin, Yunan [University of Utah, Salt Lake City, UT↗
DOE OSTI2025

Acidities of MgO surface sites: implications for the formation mechanism of Mg(OH) 2

The hydroxylation of periclase (MgO) to brucite (Mg(OH) 2 ) is thought to be an important intermediate step when using MgO to capture CO 2 from the atmosphere. However, the mechanism of hydroxylation of MgO to form Mg(OH) 2 is poorly understood. In this work, we used atomic-scale density functional tight binding simulations coupled with the metadynamics rare event method to analyze the surface chemistry of MgO and the acid dissociation equilibrium constants (pK a ) of its surface sites. The method and parameters were validated by calculating the pK a for hydroxylation of the first shell water bound to aqueous Mg 2+ ion. The pK a value derived using a probabilistic method was 12.3, which is in fair agreement with the accepted value of 11.4, with the difference between them equal to a ∼5 kJ mol −1 error in the calculations. We then extended these pK a calculations to probe the hydroxylation reactions of the surface sites of the MgO(100)–water interface, arriving at pK a s of 5.4 to deprotonate terminal water molecules bound to the surface magnesium sites (η-OH 2 or 〉MgOH 2 ), and 13.9 to deprotonate hydroxylated bridging oxygen sites (μ 5 -oxo or 〉O). Hydroxide (OH − ) adsorption on the surface was also probed and found to be less thermodynamically favorable than deprotonation of the terminal water molecule. The plausibility of the computed pK a s was verified using an activity-based speciation model and compared to pH measurements of water equilibrated with MgO nanoparticles and single crystals. The model predicted a solution pH of 7.1 when surface sites buffered and the pH of 12.0 when MgO dissolution dominated. These are close to the experimental initial solution pHs of 7–7.5 and the long term pHs of ∼10.5. The similarity suggests that the calculated pK a values from the DFTB+/metadynamics simulations are plausible and that these methods can be a useful tool to probe reaction mechanisms involving covalent bonds.

Adapa, Sai Krishna Reddy [Oak Ridge National Labor↗
DOE OSTI2020

Influence of substrate misorientation on the optical properties of Mg-doped GaN

The GaN substrate miscut angle has a significant effect on the optical properties of Mg-doped GaN grown by metal-organic chemical vapor deposition. We have studied the optical properties of epilayers grown on c-plane GaN wafers with nominal miscut angles of 0.3° and 4° toward the [11¯00] direction. Periodic surface steps are observed in thin films grown on 0.3° miscut substrates. The step separation and height, as well as the surface roughness, increase with layer thickness, leading to a decrease in Mg doping efficiency. For films grown on 4° miscut substrates, step bunching causes the formation of visually observable wavy features on the film surface with strong spatial variations in cathodoluminescence characteristics, indicating a significant effect of surface morphology on the nature of Mg incorporation and p-type characteristics.

Liu, Hanxiao (ORCID:0000000331067542)↗
DOE OSTI2024

Reliable operation of Cr 2 O 3 :Mg/ $β$-Ga 2 O 3 p–n heterojunction diodes at 600 °C

Beta gallium oxide (β-Ga 2 O 3 )-based semiconductor heterojunctions have recently demonstrated improved performance at high voltages and elevated temperatures and are, thus, promising for applications in power electronic devices and harsh environment sensors. However, the long-term reliability of these ultra-wideband gap (UWBG) semiconductor devices remains barely addressed and may be strongly influenced by chemical reactions at the p–n heterojunction interface. Here, we experimentally demonstrate operation and evaluate the reliability of Cr 2 O 3 :Mg/β-Ga 2 O 3 p–n heterojunction diodes during extended operation at 600 °C, as well as after 30 repeated cycles between 25 and 550 °C. The calculated pO 2 -temperature phase stability diagram of the Ga-Cr-O material system predicts that Ga 2 O 3 and Cr 2 O 3 should remain thermodynamically stable in contact with each other over a wide range of oxygen pressures and operating temperatures. The fabricated Cr 2 O 3 :Mg/β-Ga 2 O 3 p–n heterojunction diodes show room-temperature on/off ratios >104 at ±5 V and a breakdown voltage (V Br ) of -390 V. The leakage current increases with increasing temperature up to 600 °C, which is attributed to Poole–Frenkel emission with a trap barrier height of 0.19 eV. Over the course of a 140-h thermal soak at 600 °C, both the device turn-on voltage and on-state resistance increase from 1.08 V and 5.34 mΩ cm 2 to 1.59 V and 7.1 mΩ cm 2 , respectively. This increase is attributed to the accumulation of Mg and MgO at the Cr 2 O 3 /Ga 2 O 3 interface as observed from the time-of-flight secondary ion mass spectrometry analysis. These findings inform future design strategies of UWBG semiconductor devices for harsh environment operation and underscore the need for further reliability assessments for β-Ga 2 O 3 -based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Elucidating and contrasting the mechanisms for Mg and Ca sulfate ion-pair formation with multi-level embedded quantum mechanics/molecular dynamics simulations

Here, solutions and minerals containing sulfate (SO 4 2- ), and Ca 2+ and Mg 2+ cations, are ubiquitous throughout the lithosphere and are significant components of seawater, thus presenting a prototypical system for the study of strong electrolytes and crystal nucleation mechanisms. However, despite their relative abundance, key questions remain unanswered about the most fundamental atomic-level steps of their mineralization pathways and aqueous dynamics. Here, we carry out enhanced sampling multi-level molecular dynamics (MD) embedded correlated wavefunction theory simulations to elucidate ion-pairing mechanisms for Mg–SO 4 and Ca–SO 4 in concentrated aqueous solution, accurately capturing effects arising from both structural dynamics and electron exchange–correlation. We predict contact-ion-pair formation to be barrierless and highly exoergic for Ca–SO 4 , in agreement with its minimal solubility, whereas for Mg–SO 4 , solvent-shared and contact ion pairs have similar free energies, qualitatively consistent with its higher solubility. Finally, we demonstrate that brief high-temperature pre-equilibration may be utilized to accelerate convergence of free energies in blue-moon-ensemble enhanced-sampling MD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Assessing the sources of reionization: a spectroscopic case study of a 30× lensed galaxy at z ~ 5 with Ly α , C IV, Mg ιι, and [Ne ιιι]

We present a detailed spectroscopic analysis of a galaxy at z ≃ 4.88 that is, by chance, magnified ~30× by gravitational lensing. Only three sources at z ≳ 5 are known with such high magnification. This particular source has been shown to exhibit widespread, high equivalent width ${{\rm C\, \small {IV}}}\ \lambda 1549\, \mathring{\rm A}$ emission, implying it is a unique example of a metal-poor galaxy with a hard radiation field, likely representing the galaxy population responsible for cosmic reionization. Using ultraviolet (UV) nebular line ratio diagnostics, Very Large Telescope (VLT)/X-shooter observations rule out strong active galactic nuclei (AGN) activity, indicating a stellar origin of the hard radiation field instead. We present a new detection of ${[{\rm Ne\, \small {III}}]}\ \lambda 3870\, \mathring{\rm A}$ and use the [${\rm Ne\, \small {III}}$]/[${\rm O\, \small {II}}$] line ratio to constrain the ionization parameter and gas-phase metallicity. Closely related to the commonly used [${\rm O\, \small {III}}$]/[${\rm O\, \small {II}}$] ratio, our [${\rm Ne\, \small {III}}$]/[${\rm O\, \small {II}}$] measurement shows this source is similar to local ‘Green Pea’ galaxies and Lyman-continuum leakers. It furthermore suggests this galaxy is more metal poor than expected from the fundamental metallicity relation, possibly as a consequence of excess gas accretion diluting the metallicity. Finally, we present the highest redshift detection of ${{\rm Mg\, \small {II}}}\ \lambda 2796\, \mathring{\rm A}$, observed at high equivalent width in emission, in contrast to more evolved systems predominantly exhibiting ${\rm Mg\, \small {II}}$ absorption. Strong ${\rm Mg\, \small {II}}$ emission has been observed in most z ~ 0 Lyman-continuum leakers known and has recently been proposed as an indirect tracer of escaping ionizing radiation. In conclusion, this strongly lensed galaxy, observed just $300\, \mathrm{Myr}$ after reionization ends, enables testing of observational diagnostics proposed to constrain the physical properties of distant galaxies in the James Webb Space Telescope (JWST)/Extremely Large Telescope (ELT) era.

79 ASTRONOMY AND ASTROPHYSICS↗