Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methanol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Detection of class I methanol (CH{sub 3}OH) maser candidates in supernova remnants

We have used the Karl G. Jansky Very Large Array to search for 36 GHz and 44 GHz methanol (CH{sub 3}OH) lines in a sample of 21 Galactic supernova remnants (SNRs). Mainly the regions of the SNRs with 1720 MHz OH masers were observed. Despite the limited spatial extent covered in our search, methanol masers were detected in both G1.4–0.1 and W28. Additional masers were found in Sgr A East. More than 40 masers were found in G1.4–0.1, which we deduce are due to interactions between the SNR and at least two separate molecular clouds. The six masers in W28 are associated with the molecular cloud that is also associated with the OH maser excitation. We discuss the possibility that the methanol maser may be more numerous in SNRs than the OH maser, but harder to detect due to observational constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

THE ARECIBO METHANOL MASER GALACTIC PLANE SURVEY. III. DISTANCES AND LUMINOSITIES

We derive kinematic distances to the 86 6.7 GHz methanol masers discovered in the Arecibo Methanol Maser Galactic Plane Survey. The systemic velocities of the sources were derived from {sup 13}CO (J = 2-1), CS (J = 5-4), and NH{sub 3} observations made with the ARO Submillimeter Telescope, the APEX telescope, and the Effelsberg 100 m telescope, respectively. Kinematic distance ambiguities were resolved using H I self-absorption with H I data from the VLA Galactic Plane Survey. We observe roughly three times as many sources at the far distance compared to the near distance. The vertical distribution of the sources has a scale height of approx 30 pc, and is much lower than that of the Galactic thin disk. We use the distances derived in this work to determine the luminosity function of 6.7 GHz maser emission. The luminosity function has a peak at approximately 10{sup -6} L{sub sun}. Assuming that this luminosity function applies, the methanol maser population in the Large Magellanic Cloud and M33 is at least 4 and 14 times smaller, respectively, than in our Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

SEARCH FOR INTERSTELLAR METHOXYACETONITRILE AND CYANOETHANOL: INSIGHTS INTO COUPLING OF CYANO- TO METHANOL AND AMMONIA CHEMISTRY

As part of an effort to study gas-grain chemical models in star-forming regions as they relate to molecules containing cyanide (-C{identical_to}N) groups, we present here a search for the molecules 2-cyanoethanol (OHCH{sub 2}CH{sub 2}CN) and methoxyacetonitrile (CH{sub 3}OCH{sub 2}CN) in the galactic center region SgrB2. These species are structural isomers of each other and are targeted to investigate the cross-coupling of pathways emanating from the photolysis products of methanol and ammonia with pathways involving cyano-containing molecules. Methanol and ammonia ices are two of the main repositories of the elements C, O, and N in cold clouds and understanding their link to cyanide chemistry could give important insights into prebiotic molecular evolution. Neither species was positively detected, but the upper limits we determined allow comparison to the general patterns gleaned from chemical models. Our results indicate the need for an expansion of the model networks to better deal with cyano-chemistry, in particular with respect to pathways including products of methanol photolysis. In addition to these results, the two main observational routes for detecting new interstellar molecules are discussed. One route is by decreasing detection limits at millimeter wavelength through spatial filtering with interferometric studies at the Atacama Large Millimeter Array (ALMA), and the second is by searching for intense torsional states at THz frequencies using the Herschel Space Observatory. 2-cyanoethanol and methoxyacetonitrile would both be good test beds for exploring the capabilities of ALMA and Herschel in the study of complex interstellar chemistry.

79 ASTRONOMY AND ASTROPHYSICS↗

METHANOL AS A TRACER OF FUNDAMENTAL CONSTANTS

The methanol molecule CH{sub 3}OH has a complex microwave spectrum with a large number of very strong lines. This spectrum includes purely rotational transitions as well as transitions with contributions of the internal degree of freedom associated with the hindered rotation of the OH group. The latter takes place due to the tunneling of hydrogen through the potential barriers between three equivalent potential minima. Such transitions are highly sensitive to changes in the electron-to-proton mass ratio, {mu} = m{sub e}/m{sub p}, and have different responses to {mu}-variations. The highest sensitivity is found for the mixed rotation-tunneling transitions at low frequencies. Observing methanol lines provides more stringent limits on the hypothetical variation of {mu} than ammonia observation with the same velocity resolution. We show that the best-quality radio astronomical data on methanol maser lines constrain the variability of {mu} in the Milky Way at the level of |{Delta}{mu}/{mu}| < 28 x 10{sup -9} (1{sigma}) which is in line with the previously obtained ammonia result, |{Delta}{mu}/{mu}| < 29 x 10{sup -9} (1{sigma}). This estimate can be further improved if the rest frequencies of the CH{sub 3}OH microwave lines will be measured more accurately.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A QUANTUM BAND MODEL OF THE {nu}{sub 3} FUNDAMENTAL OF METHANOL (CH{sub 3}OH) AND ITS APPLICATION TO FLUORESCENCE SPECTRA OF COMETS

Methanol (CH{sub 3}OH) radiates efficiently at infrared wavelengths, dominating the C-H stretching region in comets, yet inadequate quantum-mechanical models have imposed limits on the practical use of its emission spectra. Accordingly, we constructed a new line-by-line model for the {nu}{sub 3} fundamental band of methanol at 2844 cm{sup -1} (3.52 {mu}m) and applied it to interpret cometary fluorescence spectra. The new model permits accurate synthesis of line-by-line spectra for a wide range of rotational temperatures, ranging from 10 K to more than 400 K. We validated the model by comparing simulations of CH{sub 3}OH fluorescent emission with measured spectra of three comets (C/2001 A2 LINEAR, C/2004 Q2 Machholz and 8P/Tuttle) acquired with high-resolution infrared spectrometers at high-altitude sites. The new model accurately describes the complex emission spectrum of the {nu}{sub 3} band, providing distinct rotational temperatures and production rates at greatly improved confidence levels compared with results derived from earlier fluorescence models. The new model reconciles production rates measured at infrared and radio wavelengths in C/2001 A2 (LINEAR). Methanol can now be quantified with unprecedented precision and accuracy in astrophysical sources through high-dispersion spectroscopy at infrared wavelengths.

79 ASTRONOMY AND ASTROPHYSICS↗

PHYSICAL CONDITIONS AROUND 6.7 GHz METHANOL MASERS. I. AMMONIA

Methanol masers at 6.7 GHz are known to be tracers of high-mass star formation in our Galaxy. In this paper, we study the large-scale physical conditions in the star-forming clumps/cores associated with 6.7 GHz methanol masers using observations of the (1, 1), (2, 2), and (3, 3) inversion transitions of ammonia with the Effelsberg telescope. The gas kinetic temperature is found to be higher than in infrared dark clouds, highlighting the relatively evolved nature of the maser sources. Other than a weak correlation between maser luminosity and the ammonia line width, we do not find any differences between low- and high-luminosity methanol masers.

79 ASTRONOMY AND ASTROPHYSICS↗

The complete, temperature resolved experimental spectrum of methanol (CH{sub 3}OH) between 560 and 654 GHz

The complete spectrum of methanol (CH{sub 3}OH) has been characterized over a range of astrophysically significant temperatures in the 560.4-654.0 GHz spectral region. Absolute intensity calibration and analysis of 166 experimental spectra recorded over a slow 248-398 K temperature ramp provide a means for the simulation of the complete spectrum of methanol as a function of temperature. These results include contributions from v{sub t} = 3 and other higher states that are difficult to model via quantum mechanical (QM) techniques. They also contain contributions from the {sup 13}C isotopologue in terrestrial abundance. In contrast to our earlier work on semi-rigid species, such as ethyl cyanide and vinyl cyanide, significant intensity differences between these experimental values and those calculated by QM methods were found for many of the lines. Analysis of these differences shows the difficulty of the calculation of dipole matrix elements in the context of the internal rotation of the methanol molecule. These results are used to both provide catalogs in the usual line frequency, linestrength, and lower state energy format, as well as in a frequency point-by-point catalog that is particularly well suited for the characterization of blended lines.

79 ASTRONOMY AND ASTROPHYSICS↗

Class I methanol (CH{sub 3}OH) maser conditions near supernova remnants

We present results from calculations of the physical conditions necessary for the occurrence of 36.169 (4{sub –1}-3{sub 0} E), 44.070 (7{sub 0}-6{sub 1} A {sup +}), 84.521 (5{sub –1}-4{sub 0} E), and 95.169 (8{sub 0}-7{sub 1} A {sup +}) GHz methanol (CH{sub 3}OH) maser emission lines near supernova remnants (SNRs), using the MOLPOP-CEP program. The calculations show that given a sufficient methanol abundance, methanol maser emission arises over a wide range of densities and temperatures, with optimal conditions at n ∼ 10{sup 4}-10{sup 6} cm{sup –3} and T > 60 K. The 36 GHz and 44 GHz transitions display more significant maser optical depths compared to the 84 GHz and 95 GHz transitions over the majority of physical conditions. It is also shown that line ratios are an important and applicable probe of the gas conditions. The line ratio changes are largely a result of the E-type transitions becoming quenched faster at increasing densities. The modeling results are discussed using recent observations of CH{sub 3}OH and hydroxyl (OH) masers near the SNRs G1.4–0.1, W28, and Sgr A East.

79 ASTRONOMY AND ASTROPHYSICS↗

The complete, temperature resolved experimental spectrum of methanol (CH{sub 3}OH) between 214.6 and 265.4 GHz

The spectrum of methanol (CH{sub 3}OH) has been characterized between 214.6 and 265.4 GHz for astrophysically significant temperatures. Four hundred and eighty-six spectra with absolute intensity calibration recorded between 240 and 389 K provided a means for the calculation of the complete experimental spectrum (CES) of methanol as a function of temperature. The CES includes contributions from v{sub t} = 3 and other higher states that are difficult to model quantum mechanically (QM). It also includes the spectrum of the {sup 13}C isotopologue in terrestrial abundance. In general the QM models provide frequencies that are within 1 MHz of their experimental values, but there are several outliers that differ by tens of MHz. As in our recent work on methanol in the 560-654 GHz region, significant intensity differences between our experimental intensities and cataloged values were found. In this work these differences are explored in the context of several QM analyses. The experimental results presented here are analyzed to provide a frequency point-by-point catalog that is well suited for the simulation of crowded and overlapped spectra. Additionally, a catalog in the usual line frequency, line strength, and lower state energy format is provided.

79 ASTRONOMY AND ASTROPHYSICS↗

Novel inverse oxide/metal catalysts for methanol synthesis: impact of oxide–metal interactions and reversible morphological changes

Inverse oxide/metal catalysts have proved to be excellent systems for the generation of methanol by CO 2 hydrogenation or the partial oxidation of methane. These systems can exhibit unique structural and chemical properties due to the nano size of the oxide component and strong oxide–metal interactions. Recent studies for ZnO/Cu, CeO 2 /Cu, TiO 2/ Cu, MgO/Cu, In 2 O 3 /Cu, and In 2 O 3 /Au catalysts have shown large variations in the composition and morphology of the oxide overlayer as a function of temperature and chemical environment. These oxide–metal interfaces are able to react with CO 2 and CH 4 at room temperature, and both reactants have a strong influence on the physical and chemical properties of the catalysts. Under reaction conditions, switches between oxide–metal and metal–metal interfaces can take in the catalyst surface. A dynamic behavior that can be linked to a high selectivity for methanol production over systems such as ZnO/Cu, CeO 2 /Cu and In 2 O 3 /Au. Finally, this type of correlation deserves additional systematic studies since it could be a powerful tool for designing highly efficient catalysts for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DISCOVERY OF THE FIRST METHANOL (CH{sub 3}OH) MASER IN THE ANDROMEDA GALAXY (M31)

We present the first detection of a 6.7 GHz Class II methanol (CH{sub 3}OH) maser in the Andromeda galaxy (M31). The CH{sub 3}OH maser was found in a VLA survey during the fall of 2009. We have confirmed the methanol maser with the new EVLA, in operation since 2010 March, but were unsuccessful in detecting a water maser at this location. A direct application for this methanol maser is the determination of the proper motion of M31, such as was previously obtained with water masers in M33 and IC10. Unraveling the three-dimensional velocity of M31 would solve for the biggest unknown in the modeling of the dynamics and evolution of the Local Group of galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

FIRST COSMOLOGICAL CONSTRAINTS ON THE PROTON-TO-ELECTRON MASS RATIO FROM OBSERVATIONS OF ROTATIONAL TRANSITIONS OF METHANOL

We have used the Australia Telescope Compact Array to measure the absorption from the 2{sub 0} {yields} 3{sub -1} E 12.2 GHz transition of methanol toward the z = 0.89 lensing galaxy in the PKS B1830-211 gravitational lens system. Comparison of the velocity of the main absorption feature with the published absorption spectrum from the 1{sub 0} {yields} 2{sub -1} E transition of methanol shows that they differ by -0.6 {+-} 1.6 km s{sup -1}. We can use these observations to constrain the changes in the proton-to-electron mass ratio {mu} from z = 0.89 to the present to 0.8 {+-} 2.1 Multiplication-Sign 10{sup -7}. This result is consistent, and of similar precision to recent observations at z = 0.68 achieved through comparison of a variety of rotational and inversion transitions, and approximately a factor of two better than previous constraints obtained in this source. Future more sensitive observations that incorporate additional rotational methanol transitions offer the prospect of improving current results by a factor of 5-10.

79 ASTRONOMY AND ASTROPHYSICS↗

A Pressure-Swing Process for Reactive CO2 Capture and Conversion to Methanol through Precise Control of Co-Located Active Sites in Dual Functional Materials

The goals of this project are to design and develop tailored dual-functional materials (DFMs) and the accompanying pressure-swing process for the reactive capture and conversion (RCC) of CO 2 to methanol, a vital product in the chemical market and a versatile precursor to fuels. Throughout this project, NREL researcher team has successfully developed 2 groups of DFM and associated cyclic RCC procedure to selectivity produce either methanol or CO, which is a major intermediate for methanol synthesis with commercially available technologies.

01 COAL, LIGNITE, AND PEAT↗

Enhanced methanol production from photothermal CO 2 reduction via multilevel interface design

Photothermal CO 2 hydrogenation is a promising route to produce methanol as a sustainable liquid solar fuel. However, most existing catalysts require a combination of solar irradiation and additional heat input to achieve a satisfactory reaction rate. For the few that can be driven solely by light, their reaction rates are one order of magnitude lower. We develop a photothermal catalyst with multilevel interfaces that achieves improved methanol production from photothermal CO 2 hydrogenation without external heat. The catalyst features a layered structure comprising Cu/ZnO/Al 2 O 3 (CZA) covered by oxidized carbon black (oCB), where the oCB/CZA interface promotes efficient heat generation and transfer, and the Cu/oxide interface contributes to high catalytic activity. Under a mild pressure of 8 bar, our oCB/CZA catalyst shows a methanol selectivity of 64.7% with a superior production rate of 4.91 mmol·g cza −1 ·h −1 , at least one order of magnitude higher than other photothermal catalysts solely driven by light. This work demonstrates a photothermal catalyst design strategy for liquid solar fuel production.

CO2 hydrogenation↗

A CATALOG OF METHANOL MASERS IN MASSIVE STAR-FORMING REGIONS. III. THE MOLECULAR OUTFLOW SAMPLE

We present an interferometric survey of the 44 GHz class I methanol maser transition toward a sample of 69 sources consisting of high-mass protostellar object (HMPO) candidates and ultracompact (UC) H ii regions. We found a 38% detection rate (16 of 42) in the HMPO candidates and a 54% detection rate (13 of 24) for the regions with ionized gas. This result indicates that class I methanol maser emission is more common toward the more evolved young stellar objects of our sample. Comparing with similar interferometric data sets, our observations show narrower linewidths, likely due to our higher spatial resolution. Based on a comparison between molecular outflow tracers and the maser positions, we find several cases where the masers appear to be located at the outflow interface with the surrounding core. Unlike previous surveys, we also find several cases where the masers appear to be located close to the base of the molecular outflow, although we cannot discard projection effects. This and other surveys of class I methanol masers not only suggest that these masers may trace shocks at different stages, but also that they may even trace shocks arising from a number of different phenomena occurring in star-forming regions: young/old outflows, cloud–cloud collisions, expanding H ii regions, among others.

79 ASTRONOMY AND ASTROPHYSICS↗

Commercialization of a Direct Methanol Fuel Cell System

This paper describes a major breakthrough in energy technology developed at the Jet Propulsion Laboratory that can be used in a wide variety of portable, remote, and transportation applications without polluting the environment. The status, performance, and design considerations of the JPL non-polluting, direct methanol, fuel cell system for consumer equipment and transportation applications are reported herein. This new fuel cell technology utilizes the direct oxidation of a 3 percent aqueous liquid methanol solution as the fuel and air (O&sub2;) as the oxidant. The only products are CO&sub2; and water. Therefore, because recharging can be accomplished by refueling with methanol, vehicles can enjoy unlimited range and extended use compared to battery operated devices requiring recharging time and power accessibility.

fuel↗

Site Integration and Regulatory Considerations for a Nuclear Power Plant Colocated with Industrial Facilities: Colocation Studies for a Petroleum Refinery, Methanol Plant, and Wood Pulp Plant

This research explores the colocation of nuclear power plants (NPPs) with industrial applications. Three existing industrial sites were considered to demonstrate the siting process and illuminate technological gaps for future work. The three applications demonstrated for colocation here are a petroleum refinery, a methanol production plant, and a pulp and paper plant. This study uses a modified version of the EPRI siting criteria to explore the geological and demographic characteristics of the location of the current industrial site, as well as exploring external hazards from the industrial plant and its surrounding land use. Data was collected from public databases to estimate site characteristics. We then discuss how the site characteristics may impact the ability to colocate an NPP with an industrial application. The application site and 5 additional sites were explored for each application to give a general indication of the siting implications for an NPP in each area. The hazards for each industrial application was also explored to determine how colocation may impact reactor safety. The following gaps have been identified and should be explored in future research on colocation of NPPs with petroleum refineries, methanol plants, and pulp and paper plants: - There is a variety of industrial use, hazards, and pipelines in the surrounding area. A more thorough review of these hazards should be considered for colocation. - In general, the whole region around some applications seems to have softer soil, with implications for large site preparation costs. Further site investigations should prioritize looking into the geotechnical conditions. - Applications along coastlines are susceptible to flooding and hurricanes. The benefits of colocation should be weighed against the potential design implications. - The benefits of natural gas pipeline infrastructure in place should be explored further. If heat supply from the NPP is not required or not feasible due to the distance between the NPP and the application, there may be an opportunity to supply hydrogen to the plant through an existing pipeline. - Because there are several collocated industrial plants in the regions for the refinery and methanol plant, the benefits of sharing resources from the NPP should be explored further. This may open up additional sites for colocation. The following knowledge gaps were identified for the colocation of NPPs with these three industries, and industrial applications in general. These gaps are: - While the STAND tool contains many important characteristics for the reactor siting process, it is not calibrated for the colocation of NPPs with industrial facilities. - There are aspects of both the NPP and industrial application that need to be quantified for a siting analysis. Particularly, we need to understand the water intake requirements for NPPs and each application. - Further work may focus on adapting the STAND site comparison methodology to comparison of sites for co-location. This will involve using the data documented in this report as a starting point and performing a comprehensive and quantitative comparison. - Without spending significant resources, it would be impossible to gather data for each site to evaluate all aspects of siting. One approach to finding data and understanding its implications to siting is looking at FSARs for existing plants. For example, most sites considered in this study have small Vs30 values, indicating soft soil. However, there are NPPs located in the vicinity of most of the sites (e.g., Waterford Steam Electric Station near New Orleans) and reviewing available site characteristics and geotechnical data for these NPPs, might provide further information for siting. - The siting analysis in this study indicates that colocation of the NPP with the industrial site could be difficult based on external hazards, cooling requirements, weather, or population. We need to determine the impact of distance between the two facilities on cost and quality of energy transport. - This study did not touch on socioeconomic impacts for NPP colocation with industrial facilities. The input-output analysis methodology could be applied to the communities referenced in this study to determine the socioeconomic impact of these projects. - Similarly, the impacts of colocation on emergency planning was not explored in this study. The impacts on emergency planning infrastructure are somewhat related to the socioeconomic impacts, and could be explored using a similar methodology. - This study also did not address physical and cybersecurity, which will be important aspects of co-location [ref] . Cybersecurity will be important, regardless of the distance, but physical security will be important if the facilities are located very closely. Physical security might also be important for the steam lines between the plants, unless they are determined to be non-safety significant. - In many site l

08 HYDROGEN↗

Site Integration and Regulatory Considerations for an NPP Colocated with a Petroleum Refinery, Methanol Plant, and Wood Pulp Plant

This research explores the colocation of nuclear power plants (NPPs) with industrial applications. Three existing industrial sites were considered to demonstrate the siting process and illuminate technological gaps for future work. The three applications demonstrated for colocation here are a petroleum refinery, a methanol production plant, and a pulp and paper plant. This study uses a modified version of the EPRI siting criteria to explore the geological and demographic characteristics of the location of the current industrial site, as well as exploring external hazards from the industrial plant and its surrounding land use. Data was collected from public databases to estimate site characteristics. We then discuss how the site characteristics may impact the ability to colocate an NPP with an industrial application. The application site and 5 additional sites were explored for each application to give a general indication of the siting implications for an NPP in each area. The hazards for each industrial application was also explored to determine how colocation may impact reactor safety. The following gaps have been identified and should be explored in future research on colocation of NPPs with petroleum refineries, methanol plants, and pulp and paper plants: - There is a variety of industrial use, hazards, and pipelines in the surrounding area. A more thorough review of these hazards should be considered for colocation. - In general, the whole region around some applications seems to have softer soil, with implications for large site preparation costs. Further site investigations should prioritize looking into the geotechnical conditions. - Applications along coastlines are susceptible to flooding and hurricanes. The benefits of colocation should be weighed against the potential design implications. - The benefits of natural gas pipeline infrastructure in place should be explored further. If heat supply from the NPP is not required or not feasible due to the distance between the NPP and the application, there may be an opportunity to supply hydrogen to the plant through an existing pipeline. - Because there are several collocated industrial plants in the regions for the refinery and methanol plant, the benefits of sharing resources from the NPP should be explored further. This may open up additional sites for colocation. The following knowledge gaps were identified for the colocation of NPPs with these three industries, and industrial applications in general. These gaps are: - While the STAND tool contains many important characteristics for the reactor siting process, it is not calibrated for the colocation of NPPs with industrial facilities. - There are aspects of both the NPP and industrial application that need to be quantified for a siting analysis. Particularly, we need to understand the water intake requirements for NPPs and each application. - Further work may focus on adapting the STAND site comparison methodology to comparison of sites for co-location. This will involve using the data documented in this report as a starting point and performing a comprehensive and quantitative comparison. - Without spending significant resources, it would be impossible to gather data for each site to evaluate all aspects of siting. One approach to finding data and understanding its implications to siting is looking at FSARs for existing plants. For example, most sites considered in this study have small Vs30 values, indicating soft soil. However, there are NPPs located in the vicinity of most of the sites (e.g., Waterford Steam Electric Station near New Orleans) and reviewing available site characteristics and geotechnical data for these NPPs, might provide further information for siting. - The siting analysis in this study indicates that colocation of the NPP with the industrial site could be difficult based on external hazards, cooling requirements, weather, or population. We need to determine the impact of distance between the two facilities on cost and quality of energy transport. - This study did not touch on socioeconomic impacts for NPP colocation with industrial facilities. The input-output analysis methodology could be applied to the communities referenced in this study to determine the socioeconomic impact of these projects. - Similarly, the impacts of colocation on emergency planning was not explored in this study. The impacts on emergency planning infrastructure are somewhat related to the socioeconomic impacts, and could be explored using a similar methodology. - This study also did not address physical and cybersecurity, which will be important aspects of co-location [ref] . Cybersecurity will be important, regardless of the distance, but physical security will be important if the facilities are located very closely. Physical security might also be important for the steam lines between the plants, unless they are determined to be non-safety significant. - In many site l

08 - HYDROGEN↗