Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Metal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hydrogen Adsorption in Ultramicroporous Metal–Organic Frameworks Featuring Silent Open Metal Sites

In this work, we utilized an ultramicroporous metal–organic framework (MOF) named [Ni 3 (pzdc) 2 (ade) 2 (H 2 O) 4 ]·2.18H 2 O (where H 3 pzdc represents pyrazole-3,5-dicarboxylic acid and ade represents adenine) for hydrogen (H 2 ) adsorption. Upon activation, [Ni 3 (pzdc) 2 (ade) 2 ] was obtained, and in situ carbon monoxide loading by transmission infrared spectroscopy revealed the generation of open Ni(II) sites. The MOF displayed a Brunauer–Emmett–Teller (BET) surface area of 160 m 2 /g and a pore size of 0.67 nm. Hydrogen adsorption measurements conducted on this MOF at 77 K showed a steep increase in uptake (up to 1.93 mmol/g at 0.04 bar) at low pressure, reaching a H 2 uptake saturation at 2.11 mmol/g at ~0.15 bar. The affinity of this MOF for H 2 was determined to be 9.7 ± 1.0 kJ/mol. In situ H 2 loading experiments supported by molecular simulations confirmed that H 2 does not bind to the open Ni(II) sites of [Ni 3 (pzdc) 2 (ade) 2 ], and the high affinity of the MOF for H 2 is attributed to the interplay of pore size, shape, and functionality.

08 HYDROGEN↗
DOE OSTI2021

Optimization of Magnesium‐Doped Lithium Metal Anode for High Performance Lithium Metal Batteries through Modeling and Experiment

Abstract Lithium (Li)‐magnesium (Mg) alloy with limited Mg amount, which can also be called Mg‐doped Li (Li‐Mg), has been considered as a potential alternative anode for high energy density rechargeable Li metal batteries. However, the optimum doping‐content of Mg in Li‐Mg anode and the mechanism of the improved performance are not well understood. Herein, density functional theory (DFT) calculations are used to investigate the effect of Mg amount in Li‐Mg anode. The Li‐Mg with about 5 wt. % Mg (abbreviated as Li‐Mg5) has the lowest absorption energy of Li, thus all the surface area can be “controlled” by Mg atoms, leading to the smooth and continuous deposition of Li on the surface around the Mg center. A localized high concentration electrolyte enables Li‐Mg5 to exhibit the best cycling stability in Li metal batteries with high‐loading cathode and lean electrolyte under 4.4 V high‐voltage, which is approaching the demand of practical application. This electrolyte also helps generate an inorganic‐rich solid electrolyte interphase, which leads to smooth, compact and less corrosion layer on the Li‐Mg5 surface. Both theoretical simulations and experimental results prove that Li‐Mg5 has optimum Mg content and gives best battery cycling performance.

Gao, Peiyuan↗
DOE OSTI2021

Optimization of Magnesium-Doped Lithium Metal Anode for High Performance Lithium Metal Batteries through Modeling and Experiment

Lithium (Li)-magnesium (Mg) alloy with limited Mg amount, which can also be called Mg-doped Li (Li-Mg), has been considered as a potential alternative anode for high energy density rechargeable Li metal batteries. However, the optimum doping-content of Mg in Li-Mg anode and the mechanism of the improved performance are not well understood. In this study, density functional theory (DFT) calculations are used to investigate the effect of Mg amount in Li-Mg anode. The Li-Mg with about 5 wt. % Mg (abbreviated as Li-Mg5) has the lowest absorption energy of Li, thus all the surface area can be “controlled” by Mg atoms, leading to the smooth and continuous deposition of Li on the surface around the Mg center. A localized high concentration electrolyte enables Li-Mg5 to exhibit the best cycling stability in Li metal batteries with high-loading cathode and lean electrolyte under 4.4 V high-voltage, which is approaching the demand of practical application. This electrolyte also helps generate an inorganic-rich solid electrolyte interphase, which leads to smooth, compact and less corrosion layer on the Li-Mg5 surface. Both theoretical simulations and experimental results prove that Li-Mg5 has optimum Mg content and gives best battery cycling performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Impact of 5-Hydroxymethylfurfural (HMF)-Metal Interactions on the Electrochemical Reduction Pathways of HMF on Various Metal Electrodes

5-Hydroxymethylfurfural (HMF), which can be derived from lignocellulosic biomass, is an important platform molecule that can be used to produce valuable biofuels and polymeric materials. Electrochemical reduction of HMF is of great interest as it uses water as the hydrogen source and achieves desired reduction reactions at room temperature and ambient pressure. Hydrogenation and hydrogenolysis are two important reactions for reductive HMF conversion. Therefore, elucidating key characteristics of electrocatalysts that govern the selectivity for hydrogenation and hydrogenolysis is critical in rationally developing efficient and selective electrocatalysts. Here in this study, combined experimental and computational investigations are used to demonstrate how the adsorption energy of HMF on metal surfaces and the resulting changes in the intramolecular bond lengths of adsorbed HMF directly impact the reduction pathways of HMF. These results make it possible to rationally understand a general trend in the behaviors observed when using various metal electrodes for HMF reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cryo-based Structural Characterization and Growth Model of Salt Film on Metal

Metal salt films play a critical role in high rate dissolution processes such as within an active pit. However, structural and compositional characterization of salt films is challenging owing to the dynamic nature of the dissolving interface. Here, the salt film formed on SS304 one-dimensional artificial pit surface was directly characterized using flash freezing and cryo-based focused ion beam/scanning electron microscopy. The salt film exhibits a porous structure. Ni is co-located with Fe in the salt film, indicating the formation of co-precipitated salt containing Fe2+ and Ni2+. Additionally, a salt film growth model is presented based on ion transport.

Salt film, Pitting corrosion, Cryogenic, Cryo-FIB/↗
DOE OSTI2021

Joining Light Metals with Polymer Composites Through Metal Overcasting

This work investigates a unique technique to join aluminum (Al) and magnesium (Mg) alloys to carbon fiber reinforced polymer (CFRP) composites without the use of adhesives or mechanical fasteners. The joints were made using an overcasting technique where the molten alloys were cast around the polymer composites using high pressure die casting method. Rapid cooling during casting allowed the composite to be embedded inside the cast metal without causing any gross damage to the former even though the molten metal temperature exceeded the melting point of the composite matrix by several 100’s of deg. C. The metal/composite interface was examined using optical microscopy and x-ray imaging and the joint strength was examined through tensile testing. Although evidence of polymer melting was evident in the x-ray images, the embedded section of the composite coupons retained their overall shape and integrity. Preliminary tension tests on Al/CFRP composites showed strength degradation of the CFRP and it failed near the metal/CFRP interface (outside the joint). Strength degradation in the CFRP suggests that the overcasting process needs further optimization to minimize thermal excursion in the CFRP. Nevertheless, the overcasting process shows great promise as a unique joining technique with application in fabricating light-weight structures for automotive and transportation industries.

overcasting, Casting, Mg Castings, Al Casting, Joi↗
DOE OSTI2021

Predicting the onset of metal-insulator transitions in transition metal oxides-A first step in designing neuromorphic devices.

Several transition metal oxides, including La1-xSrxCoO3, are promising materials to realize resistive switching devices for neuromorphic applications, as they can undergo a metal-to-insulator transition (MIT) upon small perturbations to their electronic structure. Here, we focus on the MIT induced by varying the oxygen vacancy concentration, and we propose a model to predict the required electrical bias, based on three fundamental quantities: the vacancy formation energy, the permanent polarization in the material, and its dielectric constant. We obtain these quantities using first-principles electronic structure calculations, and we discuss strategies to minimize the electrical bias which may be adopted experimentally to design and optimize neuromorphic devices.

Zhang, Shenli↗
DOE OSTI2022

p-Block Metal Oxide Noninnocence in the Oxygen Evolution Reaction in Acid: The Case of Bismuth Oxide

The Pourbaix diagrams of p-block Pb, Sb, and Bi establish a robust stability for their oxides in acidic solutions. Such oxides have found utility as stable frameworks to support metals that are active for oxygen evolution reaction (OER) catalysis, but they also possess two-electron redox couples, which can potentially engender OER activity. Thus, the use of p-block oxide supports provides an imperative for understanding the OER activity of the unary oxides. Toward this end, we report BiO x films that are able to perform OER catalysis at moderate overpotentials for extended periods of operation (>110 h) in highly acidic solutions (pH 1.0–2.25) with no sign of decreased OER activity during operation at current densities of 1–5 mA cm –2 . X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and UV-vis spectroelectrochemistry reveal a change in the Bi oxidation state prior to OER catalysis, from predominantly Bi 3+ in the as-deposited films to primarily Bi 5+ in the catalytically active films. Furthermore, this transformation is accompanied by a prominent color change from orange to dark brown. Simulations of the cyclic voltammogram catalytic profiles suggest two OER pathways for BiO x involving Bi IV O x and Bi V O x catalysts with the Bi V O x pathway prevailing after catalyst activation. Together, these results demonstrate the ability of BiO x to facilitate OER in acid with high functional stability and underscore the noninnocent role that p-block metal oxides may play in OER catalysis in acidic media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗