Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mass transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A reactive electrochemomechanical theory for growth and remodeling of polyelectrolyte hydrogels and application to dynamic polymerization of $\text{DNA}$ hydrogels

Here this study develops a framework for growth and remodeling of active polyelectrolyte hydrogels that accounts for effects of compositional changes on the mechanical response. By developing a reactive electrochemomechanical theory, thermodynamical constraints upon reactive and remodeling processes are elucidated within a general framework that allows any number of chemical reactions to evolve the response of the gel and transfer mass and charge between constituents. Fully coupled, nonlinear constitutive relations are adopted for molar fluxes, allowing exploration of effects including cross-diffusion, electrophoresis, and electro-osmosis. A robust finite element implementation is developed in the open source FEBio software (febio.org) by exploiting an equivalence between electrochemomechanics and mixture theory. The implementation is verified against analytical solutions for free swelling, and a proper reduction to a prior chemomechanical theory is demonstrated for neutral gels swollen only by a solvent with no solutes. The theory and implementation are then applied to model the tunable large swelling achieved through dynamic polymerization of DNA crosslinkers seen in our recently developed experimental hydrogel system (Cangialosi et al., 2017). A novel constitutive model for reaction-driven evolution of the locking stretch λ L in a non-Gaussian mechanical free energy was developed, where the increasing concentration of DNA crosslinkers makes further swelling energetically favorable. With a single free parameter, excellent agreement was found between measured and predicted equilibrium swelling ratios. This study demonstrated the ability to extend the electrochemomechanical framework to include chemical reactions and composition-aware constitutive models, and showed that development of reactive models allows simulation of complex dynamic polymerization phenomena not treated before. The theoretical frame here can be further expanded in scope to incorporate additional non-ideal and nonlinear phenomena.

42 ENGINEERING↗
DOE OSTI2023

Evaluation of the interaction between SiC, pre-oxidized FeCrAlMo with aluminized and pre-oxidized Fe-8Cr-2W in flowing PbLi

We report dissimilar materials interactions are a major concern when liquid metals are used as a working fluid. To simulate a dual-coolant PbLi blanket, chemical vapor deposited (CVD) SiC, pre-oxidized FeCrAlMo (APMT) and pre-oxidized aluminized coating on Fe-8Cr-2 W (F82H) specimens were exposed to flowing commercial Pb-17at.%Li with a peak temperature of 650 °C in a pre-oxidized APMT thermal convection loop (TCL) for 1000 h. Similar to prior results in static PbLi, the coated F82H showed small mass changes and limited degradation of room-temperature tensile properties. After exposure, the α-Al 2 O 3 on the surface coated F82H reacted with the PbLi to form LiAlO 2 . However, no significant Al coating loss or interdiffusion was observed. Mass transfer was observed between the APMT, TCL and the SiC specimens. Fe, Cr and Ni were dissolved into the molten flowing PbLi and transported through the TCL to react with the SiC specimens. Compared to a prior experiment with a majority of bare FeCrAl specimens that were exposed in a TCL with a peak temperature of 700 °C for 1000 h, the SiC reaction was reduced to only a few microns of carbides and silicides. Oxygen dissolved in the molten PbLi sustained the formation of an Al 2 O 3 scale on the surface of the coating and induced the formation of a thin surface SiO 2 layer on the surface of the SiC.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enhancing membrane performance for CO 2 capture from flue gas with ultrahigh MW polyvinylamine

Membranes for post-combustion CO 2 capture are required to have a high CO 2 permeance due to the limited driving force. For facilitated transport membranes synthesized with polyvinylamine (PVAm), a defect-free selective layer of <200 nm is usually required to render sufficient permeance with high CO 2 /N 2 selectivity. In order to meet such a demand through the knife-coating process, the coating solution needs to have a high viscosity at a relatively low concentration to minimize its penetration into the substrate. The demand was met by synthesizing PVAm with an ultrahigh molecular weight (MW) via inverse emulsion polymerization (IEP) in this study. Compared to solution polymerization, IEP isolates the reaction in inverse micelles suspended in a continuous organic phase, which allows excellent dissipation of the heat generated by the reaction and reduces gel formation drastically. The polymerization parameters, including monomer concentration, initiator concentration, and reaction temperature, were investigated to obtain the optimal MW of PVAm for membrane performance. As compared to solution polymerization, IEP enhanced the MW of PVAm from 1.2 to 12.7 MDa, which minimized the penetration of the coating solution into the substrate and hence the extra mass transfer resistance. The effect of MW and degree of hydrolysis of PVAm on the membrane transport properties were studied. Furthermore, by employing PVAm with a MW of 12.7 MDa to strengthen the polymer matrix, the loading of piperazine glycinate in the membrane was increased up to 85 wt.%. In conclusion, the resultant membrane achieved a CO 2 permeance of 839 GPU and a CO 2 /N 2 selectivity of 161 at the typical flue gas temperature of 57°C.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Effective removal of trace-level toxic metals from flue gas desulfurization wastewater using SiO 2 supported hydrogel sorbent

Flue gas desulfurization (FGD) wastewater generated from coal-fired power plants contain potentially harmful heavy metal pollutants that pose a threat to public health and clean water. In this work, we present a water stable polyethylenimine-n,n’-methylenebisacrylamide (PEI-MBAA) functionalized SiO 2 solid sorbent material (PMS-1.2/1/4) and investigate its metal adsorption kinetics, selectivity, regenerability, and space velocity. The kinetic studies of six of the toxic heavy metals (As, Cd, Cr, Pb, Se, and Hg) prepared with single elements in Milli-Q water showed the effect of chemical bonding and intraparticle mass transfer resistance on the sorption process. The selectivity studies demonstrated the significant adsorption efficiency toward trace-level heavy metals (Se, Cd, U, Al, etc.) from authentic industrial FGD wastewater. Through five consecutive adsorption–desorption cycles with the FGD (uptake)-citrate (release)-based buffer pair, the sorbent showed high heavy metal removal ability and good reusability. The maximum flow rate for the removal of Se from industrial FGD wastewater was determined to be as high as 8 bed volumes/minute of the sorbent bed. Finally, the results demonstrate the PMS-1.2/1.4 sorbent is a promising candidate for the removal of heavy metals from practical aqueous solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Scaling CFB risers: Maintaining microstructure dynamics

Over the years there have been numerous approaches to develop a scaleup methodology for circulating fluidized beds. Many of these past approaches have relied on macroscopic definitions of similitude to define dimensionless groups such as Reynolds number, Froude number, density ratios, and dimensional ratios involving different length scales. These approaches have demonstrated various levels of success, but often fail when used outside the bounds of experimental datasets. The issue with these methods is that they rely on macroscopic similitude with the hopes that those conditions would provide microscopic similitude as it does in single phase systems where the Buckingham Pi techniques have given reasonable success. Two of the main reasons for failure are 1) changing fluidization regimes and 2) changing material properties that result in the material falling into a different Geldart group. Both are certain to change the microstructure (local instantaneous volume solids fraction) and changes to the microstructure affect the interphase transport properties of the reactor system, namely the mass transfer and heat transfer. Here, this work presents a new approach towards scaling based upon maintaining similitude at the microscale. It reviews a novel dimensionless flow regime map developed from analysis of the deterministic chaos parameters and higher order moments to ensure microstructure similitude. The work then examines four cases from the literature to assess the scaling approach used: (1) same particle-different scale risers for Geldart Group B particles, (2) Glicksman scaling of atmospheric circulating fluidized bed combustor, (3) same particle-different scale risers for Geldart Group A particles and (4) Glicksman scaling for pressurized gasification. General findings are that none of the scaling approaches produced directly applicable microstructure similar behavior based upon the chaotic and higher moment analysis. The positive take away is that the approach can define scale conditions that will provide similar microstructure that can be us to predict transport behavior.

42 ENGINEERING↗
DOE OSTI2023

Scaling CFB risers: Beyond the data using microstructure similarity

Scaling circulating fluidized bed risers has been a point of contention for nearly a century. There have been numerous attempts to define various methodologies. These have all fallen short of providing a robust approach, primarily due to a lack of maintaining microstructure dynamics – a key factor in maintaining interphase heat and mass transfer. Recent work by the author put forward an approach based upon preserving dynamic similarity at different scales by ensuring that the microstructure remained similar by maintaining statistical and chaotic parameters across the scale. That work relied on a dimensionless regime map in which the x-axis was defined by the ratio of the solids flux to the saturation carrying capacity. This latter property was only good within the range of the data, and it became evident that extrapolation beyond the limits of the data could induce unrealistic conditions. Therefore, literature was reviewed to develop a better correlation for the saturation carrying capacity. In doing so, a critical riser diameter concept was developed and applied to the correlations for both Geldart Group A and B materials. The critical diameter for Geldart Group A and B materials is 0.2 m and 0.3 m, respectively. Here the paper then gives three examples on how to use the scaling approach to maintain dynamic similarity across the scales.

02 PETROLEUM↗
DOE OSTI2022

Flexible cryogenic air separation unit—An application for low-carbon fossil-fuel plants

In this study, the rapid integration of intermittent renewable sources into the electricity grid is driving the need for a flexible cryogenic air separation unit (ASU) coupled with a low-carbon fossil-fuel plant. However, the state-of-the-art ASU process is highly integrated and nonlinear, which can significantly restrict its ramping rate. In this work, we study the fundamental dynamics of a state-of-the-art double-column ASU, focusing on the dynamic characteristics of the highly integrated and nonlinear heat and mass transfers, and we propose basic control methods for achieving high process ramping rates. We found that the vapor–liquid countercurrent flows in the low-pressure column are critical to the cryogenic rectification of air, which governs the ramp rate of the ASU. This countercurrent flow structure is created through a complex heat integration process in the ASU. Here, this process is simplified as a countercurrent heat transfer to reduce the complexity of studying the ASU dynamics. To preserve this flow structure, the heat integration is maintained so that its heat duty follows the ASU load, using several basic controllers on the critical stream flowrates. A flow-driven dynamic ASU model is built in Aspen Plus Dynamics to capture the basic ramping dynamics. This model revealed a fundamental mismatch in the dynamics in the ASU column that causes a significant loss of O 2 product purity when ramping down the ASU and slightly increases the purity when ramping up. Based on these findings, we propose a basic control method for rapidly ramping down/up the ASU while maintaining O 2 product purity. Simulation results show the ASU basic dynamic process successfully ramps at a rate up to 10 %/min (40–100 % load) while maintaining the O 2 product purity at 95.2–95.6 mol%.

42 ENGINEERING↗
DOE OSTI2023

An effective air–liquid contactor for CO 2 direct air capture using aqueous solvents

Here, the development of a cost-effective, corrosion resistant, high-flux direct air capture (HiDAC) contactor for a solvent-based direct air capture (DAC) process is reported. Literature technoeconomic analyses suggest that the air–liquid contactor can cost over 20 % of the overall DAC plant’s annualized capital costs. To bring down the overall cost of DAC, it is imperative that an effective contactor is developed. A hybrid contactor consisting of a commercial polyvinylchloride structured packing enhanced with stainless-steel 410 random packing has been developed to provide a high surface area for air–liquid contact. The contactor geometry, wettability, corrosion resistance, pressure drop, along with its CO 2 uptake efficiency, CO 2 uptake rates, and extended loading potential using potassium sarcosinate solutions are investigated. Results show that the HiDAC contactor has a relatively high specific surface area (885 m 2 /m 3 ), which allows for CO 2 uptake efficiencies of up to 75 % and capture rates of up to 550 g of CO 2 per day for a 0.3 × 0.25 × 0.3 m contactor. The contactor also exhibits high levels of wettability and corrosion resistance with amino acid-based DAC solvents. A CO 2 uptake model was developed, and modeling results are compared to experimental data to simulate and predict the performance of the contactor in a DAC process using potassium sarcosinate solvent. The system’s overall mass transfer coefficient and theoretical pressure drop were also calculated, and these results were compared to DAC data found in literature. The results presented indicate that the HiDAC contactor is well suited for DAC due to its high specific surface area, resistance to corrosion, and high degree of wettability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Solvent-driven aqueous separations for hypersaline brine concentration and resource recovery

Solvent-driven separation processes can extract water and high-value minerals from high salinity or contaminated brines, simultaneously reducing the environmental impact of brine disposal and enabling resource recovery. The efficient dewatering of hypersaline brines is essential for the sustainable minimal and zero liquid discharge processing of industrial wastewaters. Fractional crystallization can selectively extract ions from contaminated waste streams, allowing critical materials to be recycled, including transition and lanthanide metals required for renewable energy generation and storage. Mass transfer in solvent-driven water extraction occurs across a liquid–liquid interface, eliminating the scaling and fouling of membrane and heat exchanger surfaces and limiting the need for extensive pretreatment. Solvent-driven fractional crystallization can leverage sequential treatment and control of process conditions to rapidly recover salts without requiring evaporation of water. Despite promising applications, the principles and potential of solvent-driven aqueous separations remain poorly understood. This critical review explores the opportunities presented by solvent-based aqueous separations from the molecular to process scale, evaluating the chemistry of solvation and system design in the broader context of desalination, resource recovery, water softening, and mineral production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Component innovations for lower cost mechanical vapor compression

Despite significant capital and operating costs, mechanical vapor compression (MVC) remains the preferred technology for challenging brine concentration applications. Here, this work seeks to assess the dependence of MVC costs on feedwater salinity and desired water recovery and to quantify the value of improved component performance or reduced component costs for reducing the levelized cost of water (LCOW) of MVC. We built a cost optimization model coupling thermophysical, heat and mass transfer, and technoeconomic models to optimize and identify low cost MVC system designs as a function of feedwater salinity and water recovery. The LCOW ranges over 3.6 to 6.1 $\$$/m 3 for seawater feed salinities of 25–150 g/kg and water recoveries of 40–80 %. We then perform sensitivity analysis on parameter inputs to isolate irreducible costs and determine high value component innovation targets. The LCOW was most sensitive to evaporator material costs and performance, including the overall heat transfer coefficient in the evaporator. Process and material innovations such as polymer-composite evaporator tubes that reduce evaporator costs by 25 % without reducing heat transfer performance by more than 10 % would result in MVC cost reductions of 8 %.

42 ENGINEERING↗
DOE OSTI2025

Population Balance Models for Catalytic Depolymerization: From Elementary Steps to Multiphase Reactors

Here, the ongoing accumulation of plastic waste in landfills and in the environment is driving research on chemical processes and catalysts to recycle polymers. Traditional modeling strategies are not applicable to these processes because they involve too many reactants and intermediates, one for each molecular weight and each functionalization. To model the kinetics, we have developed population balance models (PBMs) that account for macromolecular reactants in the bulk and macromolecular catalytic intermediates. These PBMs couple to each other through polymer adsorption and desorption models and to traditional rate equations for small molecule products and co-reactants (like hydrogen or ethylene). The models, in combination with experimental data, are being used in many ways: (i) to test mechanistic hypotheses, (ii) to extract rate parameters, (iii) to quantitatively compare catalyst activities, (iv) to account for mass transfer and vapor–liquid partitioning in two-phase reactors, and (v) to design novel support architectures and catalysts that mimic the processive action of natural depolymerization enzymes. Some key theoretical advances allow PBMs to be constructed from elementary rates and mechanisms, as opposed to traditional formulations with pseudoelementary rate parameters invoked as fitting parameters. We discuss ways to build these models “bottom-up” from first-principles calculations and ways to extract model parameters from “top down” analyses of rate data. The combination provides a quantitative bridge between first-principles calculations and the kinetics of complex macromolecular transformations for polymer upcycling and beyond.

Manis, Lela K. [University of Illinois at Urbana-C↗
DOE OSTI2023

Origin of Phase Separation in Ni-Rich Layered Oxide Cathode Materials During Electrochemical Cycling

In intercalation materials, the kinetics and uniformity of mass transport across the nanocrystalline domains dictate the structural reversibility and transport capability at the macroscopic level. (De)intercalation-induced interlayer disintegrations exhibit anisotropic crystallite size change. Due to the anisotropic mass transport mechanism, separated phases are inherently crystallographically oriented. One such material is LiNi $1–x–y$ Mn $x$ Co $y$ O 2 , which plays a pivotal role in advanced Li-ion batteries but suffers from severe phase inhomogeneities under fast charge or electrochemical aging. Here, using operando synchrotron techniques, we probe the mechanistic origins of the compositional and orientational-dependent phase separations during the electrochemical cycling of LiNi 0.8 Mn 0.1 Co 0.1 O 2 by comprehensive analysis of both in-plane and out-of-plane reflections. In the H2/H3 phase regime, in-plane domain propagation occurs due to increased covalency despite the severe decay of interlayer crystallographic order, resulting in the change of crystalline domain shape from 3D spheres to two-dimensional nanosheets. The crystallographically selective XRD line splitting is linked to the geometry of the facets as mass transfers along the ab plane. In conclusion, this work provides mechanistic insights into crystallographic orientation-dependent phase inhomogeneity under fast charge and extended cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pseudocapacitance: From Fundamental Understanding to High Power Energy Storage Materials

There is an urgent global need for electrochemical energy storage that includes materials that can provide simultaneous high power and high energy density. One strategy to achieve this goal is with pseudocapacitive materials that take advantage of reversible surface or near-surface Faradaic reactions to store charge, surpassing the capacity limitations of electrical double-layer capacitors and mass transfer limitations of batteries. The past decade has seen tremendous growth in the understanding of pseudocapacitance as well as materials that exhibit this phenomenon. The purpose of this study is to examine the fundamental development of the concept of pseudocapacitance and how it came to prominence in electrochemical energy storage as well as to describe new classes of materials whose electrochemical energy storage behavior can be described as pseudocapacitive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Breakthrough Zn(II) Catalyst for Direct Air Capture Employing CO 2 Hydration

Direct air capture (DAC) represents a vital technology for atmospheric CO₂ remediation, but few studies have tested catalysts at dilute atmospheric CO₂ concentrations. Inspired by the carbonic anhydrase metalloenzyme, we report a catalytic DAC strategy employing robust zinc(II) enzyme mimics that enable efficient CO₂ sequestration pathways. A catalyst-mediated CO₂ hydration cycle in aqueous sorbents facilitates accelerated capture from dilute atmospheric air, thereby addressing the kinetic limitations observed in carbonate-based systems. Our developed complexes [ZnC1] and [ZnC2] enhance capture rates up to two-fold at millimolar concentrations and improve CO₂ mass transfer by 40-60% in 1 M K₂CO₃ sorbent under ambient conditions. These bench-stable, earth-abundant zinc catalysts operate effectively under dilute CO₂ concentrations, overcoming the kinetic limitations of conventional carbonate-based sorbents. As a result, mechanistic studies support a biomimetic catalytic cycle that facilitates rapid CO₂ conversion, demonstrating that catalyst-assisted DAC can enable energy-efficient, scalable carbon capture technologies.

Atmospheric chemistry↗
DOE OSTI2021

Membrane-Confined Iron Oxychloride Nanocatalysts for Highly Efficient Heterogeneous Fenton Water Treatment

Heterogeneous advanced oxidation processes (AOPs) allow for the destruction of aqueous organic pollutants via oxidation by hydroxyl radicals ( • OH). However, practical treatment scenarios suffer from the low availability of short-lived • OH in aqueous bulk, due to both mass transfer limitations and quenching by water constituents, such as natural organic matter (NOM). In this work, we overcome these challenges by loading iron oxychloride catalysts within the pores of a ceramic ultrafiltration membrane, resulting in an internal heterogeneous Fenton reaction that can degrade organics in complex water matrices with pH up to 6.2. With • OH confined inside the nanopores (~ 20 nm), this membrane reactor completely removed various organic pollutants with water fluxes of up to 100 L m –2 h –1 (equivalent to a retention time of 10 s). This membrane, with a pore size that excludes NOM (>300 kDa), selectively exposed smaller organics to •OH within the pores under confinement and showed excellent resiliency to representative water matrices (simulated surface water and sand filtration effluent samples). Moreover, the membrane exhibited sustained AOPs (>24 h) and could be regenerated for multiple cycles. Our results suggest the feasibility of exploiting ultrafiltration membrane-based AOP platforms for organic pollutant degradation in complex water scenarios.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Corrosion Prevention of Additively Manufactured Aluminum Packing Devices Developed for Process Intensification of CO 2 Capture by Aqueous Amines

Corrosion of additively manufactured (i.e., 3D printed) aluminum packing devices, developed to enhance heat and mass transfer in CO 2 absorption columns using amine-CO 2 scrubbing solutions, is investigated in this paper. The aluminum structures printed by selective laser melting with Al-10Si-0.3Mg feed powder are susceptible to corrosion in aqueous monoethanolamine, both fresh and used CO 2 -saturated solutions. The efficacy of corrosion-protective surface layers of aqueous polyether–ketone–ketone (PEKK) dip coating to provide amine corrosion resistance to the 3D printed aluminum structure is also evaluated. PEKK nanothick layers were coated on the corrugated surface of a 3D printed structure, identical to that of the intensified device, yielding 27 times higher corrosion resistance than the uncoated Al alloy surface. Finally, a systematic long-term electrochemical corrosion analysis revealed that a multilayer PEKK dip coating protocol enables protection of the 3D printed Al alloy surface in various CO 2 –monoethanolamine solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Copper Electrodeposition from Deep Eutectic Solvents—Voltammetric Studies Providing Insights into the Role of Substrate: Platinum vs Glassy Carbon

We report on the effect of the substrate on electrochemical deposition of Cu from deep eutectic solvent ethaline. We investigated the polarization behavior during electrodeposition of Cu on Pt and glassy carbon (GC) from both Cu 2+ and Cu + containing ethaline using cyclic voltammetry (CV). Formation of bulk Cu deposits on both substrates underwent nucleation and growth processes; however, the nucleation was considerably sluggish on GC compared to Pt. While experiments in Cu+ solutions indicated that coalescence of Cu islands on Pt is a slow process and that its surface may not be fully covered by Cu, such determination of Cu coverage could not be made on GC. Cu dissolution is also slower from GC than from Pt. It was observed that CV of Cu deposition on GC is influenced by the surface preparation method. Since ethaline has high chloride concentration, a parallel study in aqueous 3 M NaCl solution was conducted in order to examine the influence of the chloride medium on the electrodeposition process. Lastly, this revealed that electrodeposition in both media occurred in the same manner but with different charge and mass transfer rates caused by the differences in viscosity and chloride concentrations of the two solutions.

25 ENERGY STORAGE↗
DOE OSTI2025

Self-Assembled Oligomers Facilitate Amino Acid-Driven CO 2 Capture at the Air–Aqueous Interface

Direct air capture of CO 2 using amino acid absorbents, such as glycine or sarcosine, is constrained by the relatively slow mass transfer of CO 2 through the air–aqueous interface. Our recent study showed a marked improvement in CO 2 capture by introducing CO 2 -permeable oligo-dimethylsiloxane (ODMS-MIM + ) oligomers with cationic (imidazolium, MIM + ) headgroups. Here, in this work, we have employed all-atom molecular dynamics simulations in combination with subensemble analysis using network theory to provide a detailed molecular picture of the behavior of CO 2 and the glycinate anions (Gly – ) at the ODMS-MIM + decorated air–aqueous interfaces. We show that the cationic head groups of the surfactants enhance the concentration and lifetime of Gly – in the interfacial region, while ODMS tails promote the physisorption of CO 2 in the interfacial region. Together, these two factors increase the effective region of contact and the probability of interactions between CO 2 and Gly – compared to that of the pure air–aqueous interface. The fundamental insights gained in this work establish essential foundations for developing hybrid systems with oligomer-decorated interfaces to maximize the overall CO 2 capture rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗