Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mass Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

High Power and Efficiency Space Traveling-Wave Tube Amplifiers With Reduced Size and Mass for NASA Missions

Recent advances in high power and efficiency space traveling-wave tube amplifiers (TWTAs) for NASA s space-to-Earth communications are presented in this paper. The RF power and efficiency of a new K-Band amplifier are 40 W and 50 percent and that of a new Ka-Band amplifier are 200 W and 60 percent. An important figure-of-merit, which is defined as the ratio of the RF power output to the mass (W/kg) of a TWT has improved by a factor of ten over the previous generation Ka-Band devices.

Simons, Rainee N.↗
NASA NTRS2012

Search for Gravitational Waves from Intermediate Mass Binary Black Holes

We present the results of a weakly modeled burst search for gravitational waves from mergers of non-spinning intermediate mass black holes (IMBH) in the total mass range 100-450 solar Mass and with the component mass ratios between 1:1 and 4:1. The search was conducted on data collected by the LIGO and Virgo detectors between November of 2005 and October of 2007. No plausible signals were observed by the search which constrains the astrophysical rates of the IMBH mergers as a function of the component masses. In the most efficiently detected bin centered on 88 + 88 solar Mass , for non-spinning sources, the rate density upper limit is 0.13 per Mpc(exp 3) per Myr at the 90% confidence level.

Blackburn, L.↗
NASA NTRS2005

Solid Oxide Fuel Cell/Gas Turbine Hybrid Cycle Technology for Auxiliary Aerospace Power

A notional 440 kW auxiliary power unit has been developed for 300 passenger commercial transport aircraft in 2015AD. A hybrid engine using solid-oxide fuel cell stacks and a gas turbine bottoming cycle has been considered. Steady-state performance analysis during cruise operation has been presented. Trades between performance efficiency and system mass were conducted with system specific energy as the discriminator. Fuel cell performance was examined with an area specific resistance. The ratio of fuel cell versus turbine power was explored through variable fuel utilization. Area specific resistance, fuel utilization, and mission length had interacting effects upon system specific energy. During cruise operation, the simple cycle fuel cell/gas turbine hybrid was not able to outperform current turbine-driven generators for system specific energy, despite a significant improvement in system efficiency. This was due in part to the increased mass of the hybrid engine, and the increased water flow required for on-board fuel reformation. Two planar, anode-supported cell design concepts were considered. Designs that seek to minimize the metallic interconnect layer mass were seen to have a large effect upon the system mass estimates.

Steffen, Christopher J., Jr.↗
DOE OSTI2025

Contrasting age-dependent leaf acclimation strategies drive vegetation greening across deciduous broadleaf forests in mid- to high latitudes

Increasing leaf area and extending vegetation growing seasons are two primary drivers of global greening, which has emerged as one of the most significant responses to climate change. However, it remains unclear how these two leaf acclimation strategies would vary across forests at a large spatial scale. Here, in this study, using multiple satellite-based datasets and field measurements, we analysed the temporal changes (Δ) in maximal leaf area index (LAI max ) and length of the growing season (LOS) from 2002 to 2021 across deciduous broadleaf forests (DBFs) in the middle to high latitudes. Contrary to the widely held assumption of coordination, our results revealed a negative correlation between ΔLAI max and ΔLOS. Notably, the trade-offs between ΔLAImax and ΔLOS were strongly explained by stand age. Younger DBFs, with lower baseline LAI max , predominantly located in eastern Asia, displayed an increase in LAI max with small changes in LOS. This acquisitive strategy facilitated younger DBFs to grow more photosynthetically efficient leaves with low leaf mass per area, enhancing their light use efficiency. Conversely, older DBFs with a higher baseline LAI max , primarily located in North America and Europe, extended their LOS by increasing leaf mass per area. This conservative strategy facilitated older DBFs to produce thicker, but less photosynthetically efficient leaves, resulting in decreased light use efficiency. Our findings offer new insights into the contrasting changes in leaf area and growing season length and highlight their divergent impacts on ecosystem functioning.

Wang, Fangyi [Sun Yat-Sen Univ., Zhuhai (China)]↗
NASA NTRS1994

X-ray sources in regions of star formation. 5: The low mass stars of the Upper Scorpius association

We report followup investigations of Einstein x-ray observations of the Upper Scorpius OB association. We identify 28 low mass pre-main sequence stars as counterparts of x-ray sources in the approximately = 7 square degrees of the OB association observed. Based on kinematics and lithium abundances, these stars are low mass members of the OB association. We use optical spectra and optical and near-IR photometry to determine the stellar luminosities, effective temperatures, masses, and ages. We show that the bolometric corrections and effective temperatures of the G and K stars are consistent with those of subgiants. The low mass stars have isochronal ages of 1-2 Myr, depending on the choice of evolutionary models, with very small dispersion (sigma approximately = 1 Myr). This age is significantly younger than the 5-6 Myr found for the more massive B stars. The small dispersion in stellar ages, less than 10% the sound-crossing time of the association, suggests that star formation was triggered. We present two scenarios for star formation in this association. In the two-episode scenario, formation of the low mass stars was triggered by a supernova explosion, and the low mass stars form quickly, with high efficiency. Alternatively, high and low mass star formation was all initiated at the same time, some 5-6 Myr ago, and the apparent systematic age difference is an artifact of how the isochrones are dated. The effect of the supernova is to terminate mass accretion and yield an apparently coeval population. We show that the incompleteness in the x-ray sampling is about 65%, and is strongly dependent on stellar mass. After correction for incompleteness, we estimate there are about 2000 low mass members (stellar mass less than 2 solar mass) of this association. The mass function in this association is indistinguishable from that of the field. The ratio of naked to classical T Tauri stars is much larger than in Tau-Aur, and may be attributable to the local environment. We also present observations of eight ROX sources associated with the rho Oph cloud, and observations of non-pre-main sequence (PMS) stars in our fields.

Walter, Frederick M.↗
NASA NTRS2020

Pterodactyl: Control System Design for Deployable Entry Vehicles

As space exploration missions continue to get more complex, greater demands for mass and volume are being placed on planetary entry vehicles. At the same time, the desire for precision entry targeting to enable surface missions at very specific locations is becoming common. Deployable aeroshells are one type of technology that is being developed to increase the down-mass capability of planetary entry vehicles while complying with current launch vehicle volume constraints. Propulsive control can be used for precision entry targeting but can require a large percentage of the vehicle's total mass or volume for propellant. The Pterodactyl project is studying alternative entry control systems on a Deployable Entry Vehicle to potentially introduce a mass and volume efficient entry system that can achieve precision targeting. This paper presents the mechanical design work undertaken to support the Pterodactyl trade study of three entry vehicle control system options: 1) Flaps, 2) Mass Movement, and 3) Reaction Control System.

D'Souza, Sarah↗
NASA NTRS1982

100 kWe MPD thruster system design

A MPD thruster subsystem point design is presented that may be applicable to a wide variety of NASA/DoD missions. The system is electrically matched to a 100 kWe thermoelectric-nuclear supply and operates the thruster in a pulsed, quasi-steady mode on cryogenically stored argon. The overall system efficiency is 52% which includes efficiencies of the electrolytic capacitor energy store, constant power charging unit, thyristor switch, and assumes a 60% thruster efficiency. The system specific mass is 21.6 kg/kWe. Various technology improvements are discussed which could reduce the specific mass to under 10 kg/kWe, while simultaneously increasing the efficiency and reducing the overall subsystem complexity.

King, D. Q.↗
NASA NTRS1994

Double-core evolution. 5: Three-dimensional effects in the merger of a red giant with a dwarf companion

The evolution of the common envelope phase of a binary system consisting of a 4.67 solar mass red giant and a 0.94 solar mass dwarf is studied using smoothed particle hydrodynamics. We demonstrate that the three-dimensional effects associated with the gravitational tidal torques lead to a rapid decay of the orbit on timescales approximately less than 1 yr. The relative orbit of the two cores in the common envelope is initally eccentric and tends to circularize as the orbital separation of the two cores decreases. The angular momentum lost from the orbital motion is distributed throughout the common envelope, and the double core does not evolve to a state of co-rotation for the evolutionary time followed. The energy dissipated from the relative orbit and deposited in the common envelope results in the ejection of approximately 13% of the mass of the envelope. The mass is ejected in all directions, but there is a preference for mass ejection in the orbital plane of the binary system. For example, approximately 80% of the ejected mass lies within 30 deg of the binary orbital plane. Because gravitational forces are long range, most of the energy and angular momentum is imparted to a small fraction of the common envelope resulting in an efficiency of the mass ejection process of approximately 15%. The core of the red giant executes significant displacement with respect to the center of mass of the system and contributes nearly equally to the total energy dissipation rate during the latter phases of the evolution. The degree of departure from synchronism of the initial binary system can be an important property of the system which can affect the outcome of the common envelope phase.

Terman, James L.↗
NASA NTRS2010

Compact Rare Earth Emitter Hollow Cathode

A compact, high-current, hollow cathode utilizing a lanthanum hexaboride (LaB6) thermionic electron emitter has been developed for use with high-power Hall thrusters and ion thrusters. LaB6 cathodes are being investigated due to their long life, high current capabilities, and less stringent xenon purity and handling requirements compared to conventional barium oxide (BaO) dispenser cathodes. The new cathode features a much smaller diameter than previously developed versions that permit it to be mounted on axis of a Hall thruster ( internally mounted ), as opposed to the conventional side-mount position external to the outer magnetic circuit ("externally mounted"). The cathode has also been reconfigured to be capable of surviving vibrational loads during launch and is designed to solve the significant heater and materials compatibility problems associated with the use of this emitter material. This has been accomplished in a compact design with the capability of high-emission current (10 to 60 A). The compact, high-current design has a keeper diameter that allows the cathode to be mounted on the centerline of a 6- kW Hall thruster, inside the iron core of the inner electromagnetic coil. Although designed for electric propulsion thrusters in spacecraft station- keeping, orbit transfer, and interplanetary applications, the LaB6 cathodes are applicable to the plasma processing industry in applications such as optical coatings and semiconductor processing where reactive gases are used. Where current electrical propulsion thrusters with BaO emitters have limited life and need extremely clean propellant feed systems at a significant cost, these LaB6 cathodes can run on the crudest-grade xenon propellant available without impact. Moreover, in a laboratory environment, LaB6 cathodes reduce testing costs because they do not require extended conditioning periods under hard vacuum. Alternative rare earth emitters, such as cerium hexaboride (CeB6) can be used in this configuration with possibly an even longer emitter life. This cathode is specifically designed to integrate on the centerline of a high-power Hall thruster, thus eliminating the asymmetries in the plasma discharge common to cathodes previously mounted externally to the thruster s magnetic circuit. An alternative configuration for the cathode uses an external propellant feed. This diverts a fraction of the total cathode flow to an external feed, which can improve the cathode coupling efficiency at lower total mass flow rates. This can improve the overall thruster efficiency, thereby decreasing the required propellant loads for different missions. Depending on the particular mission, reductions in propellant loads can lead to mission enabling capabilities by allowing launch vehicle step-down, greater payload capability, or by extending the life of a spacecraft.

Watkins, Ronald↗
NASA NTRS2004

Ultrasonic Apparatus for Pulverizing Brittle Material

The figure depicts an apparatus that pulverizes brittle material by means of a combination of ultrasonic and sonic vibration, hammering, and abrasion. The basic design of the apparatus could be specialized to be a portable version for use by a geologist in collecting powdered rock samples for analysis in the field or in a laboratory. Alternatively, a larger benchtop version could be designed for milling and mixing of precursor powders for such purposes as synthesis of ceramic and other polycrystalline materials or preparing powder samples for x-ray diffraction or x-ray fluorescence measurements to determine crystalline structures and compositions. Among the most attractive characteristics of this apparatus are its light weight and the ability to function without need for a large preload or a large power supply: It has been estimated that a portable version could have a mass <0.5 kg, would consume less than 1 W h of energy in milling a 1-cm3 volume of rock, and could operate at a preload <10 N. The basic design and principle of operation of this apparatus are similar to those of other apparatuses described in a series of prior NASA Tech Briefs articles, the two most relevant being Ultrasonic/ Sonic Drill/Corers With Integrated Sensors (NPO-20856), Vol. 25, No. 1 (January 2001), page 38 and Ultrasonic/ Sonic Mechanisms for Deep Drilling and Coring (NPO-30291), Vol. 27, No. 9 (September 2003), page 65. As before, vibrations are excited by means of a piezoelectric actuator, an ultrasonic horn, and a mass that is free to move axially over a limited range. As before, the ultrasonic harmonic motion of the horn drives the free-mass in a combination of ultrasonic harmonic and lower-frequency hammering motion. In this case, the free-mass is confined within a hollow cylinder that serves as a crushing chamber, and the free-mass serves as a crushing or milling tool. The hammering of the free-mass against a material sample at the lower end of the chamber grinds the sample into powder in a relatively short time. The restriction of the free-mass to axial motion only makes the grinding very efficient. The free-mass can be fabricated to have teeth on its lower face to enhance the grinding effect. Optionally, there can be a hole at the bottom of the chamber covered with a sieve to tailor the size distribution of the powder leaving the crushing chamber.

Sherrit, Stewart↗
NASA NTRS2008

Effect of Nitrogen Gas on the Lifetime of Carbon Nanotube Field Emitters for Electron-Impact Ionization Mass Spectrometry

The lifetime of a patterned carbon nanotube film is evaluated for use as the cold cathode field emission ionization source of a miniaturized mass spectrometer. Emitted current is measured as a function of time for varying partial pressures of nitrogen gas to explore the robustness and lifetime of carbon nanotube cathodes near the expected operational voltages (70-100 eV) for efficient ionization in mass spectrometry. As expected, cathode lifetime scales inversely with partial pressure of nitrogen. Results are presented within the context of previous carbon nanotube investigations, and implications for planetary science mass spectrometry applications are discussed.

Getty, Stephanie A.↗
NASA NTRS2003

Numerical Simulation of Protoplanetary Vortices

The fluid dynamics within a protoplanetary disk has been attracting the attention of many researchers for a few decades. Previous works include, to list only a few among many others, the well-known prescription of Shakura & Sunyaev, the convective and instability study of Stone & Balbus and Hawley et al., the Rossby wave approach of Lovelace et al., as well as a recent work by Klahr & Bodenheimer, which attempted to identify turbulent flow within the disk. The disk is commonly understood to be a thin gas disk rotating around a central star with differential rotation (the Keplerian velocity), and the central quest remains as how the flow behavior deviates (albeit by a small amount) from a strong balance established between gravitational and centrifugal forces, transfers mass and momentum inward, and eventually forms planetesimals and planets. In earlier works we have briefly described the possible physical processes involved in the disk; we have proposed the existence of long-lasting, coherent vortices as an efficient agent for mass and momentum transport. In particular, Barranco et al. provided a general mathematical framework that is suitable for the asymptotic regime of the disk; Barranco & Marcus (2000) addressed a proposed vortex-dust interaction mechanism which might lead to planetesimal formation; and Lin et al. (2002), as inspired by general geophysical vortex dynamics, proposed basic mechanisms by which vortices can transport mass and angular momentum. The current work follows up on our previous effort. We shall focus on the detailed numerical implementation of our problem. We have developed a parallel, pseudo-spectral code to simulate the full three-dimensional vortex dynamics in a stably-stratified, differentially rotating frame, which represents the environment of the disk. Our simulation is validated with full diagnostics and comparisons, and we present our results on a family of three-dimensional, coherent equilibrium vortices.

Lin, H.↗
NASA NTRS2005

Performance of High-Efficiency Advanced Triple-Junction Solar Panels for the LILT Mission Dawn

NASA's Discovery Mission Dawn is designed to (LILT) conditions. operate within the solar system's Asteroid belt, where the large distance from the sun creates a low-intensity, low-temperature (LILT) condition. To meet the mission power requirements under LlLT conditions, very high-efficiency multi-junction solar cells were selected to power the spacecraft to be built by Orbital Sciences Corporation (OSC) under contract with JPL. Emcore's InGaP/InGaAs/Ge advanced triple-junction (ATJ) solar cells, exhibiting an average air mass zero (AMO) efficiency of greater than 27.6% (one-sun, 28 C), were used to populate the solar panels [1]. The two solar array wings, to be built by Dutch Space, with 5 large- area panels each (total area of 36.4 sq. meters) are projected to produce between 10.3 kWe and 1.3 kWe of end-of life (EOL) power in the 1.0 to 3.0 AU range, respectively. The details of the solar panel design, testing and power analysis are presented.

triple junction solar cells↗
NASA NTRS2004

The Super Lightweight Interchangeable Carrier (SLIC) Project

The Super Lightweight Interchangeable Carrier (SLIC) Grant consists of two separate but related phases. The first phase of this grant was conducted under a separate Institute for Scientific Research, Inc. (ISR) subcontract to FMW Composite Systems, Inc., of Bridgeport, West Virginia. FMW conducted early design and engineering associated with the future development of a stronger and lighter Space Shuttle carrier pallet. This improved pallet is intended to support the next and last planned Shuttle servicing mission for the on-orbit Hubble Space Telescope (HST). The salient characteristics of this carrier are increased performance, together with significantly reduced mass. As the next servicing mission is the last planned upgrade mission for the HST, this lighter and stronger pallet will enable greater payload delivery to the HST, potentially increasing the servicing mission effectiveness and science lifetime of the telescope. The second phase of this grant, conducted by ISR, consisted of a data systems study to exploit further the potential of the HST servicing pallet for other space missions, specifically for application of semi-permanent placement of science payloads on the International Space Station (ISS). As in the case of the HST, a lightweight and more rigid pallet could be employed to increase science return for the ISS. A data systems study intended to complement the current ISS s Institutional data system holds the potential of increasing the science return for data efficiency, just as the lightweight pallet serves to increase payload mass efficiency.

Source record↗
NASA NTRS1991

Modeled performance of monolithic, 3-terminal InP/Ga(0.47)In(0.53)As concentrator solar cells as a function of temperature and concentration ratio

Using measured device parameters from a monolithic three-terminal In/GaInAs (0.75 eV) tandem concentrator solar cell, a numerical model is constructed that calculates efficiency as a function of temperature and concentration ratio. The device measurements indicate that the series resistance in the InP top cell severely limits the maximum efficiency at high concentration ratios. Results from the model in which a single-junction InP concentrator solar cell that has a lower resistance by a factor of six was substituted for the top cell show that peak 20 C air-mass-zero (AM0) efficiencies should approach 30 percent at concentration ratios greater than 100. At 80 C, this tandem cell should exceed 24 percent AM0 efficiency.

Osterwald, C. R.↗
NASA NTRS2015

EBF3 Design and Sustainability Considerations

Electron beam freeform fabrication (EBF3) is a cross-cutting technology for producing structural metal parts using an electron beam and wire feed in a layer-additive fashion. This process was developed by researchers at NASA Langley to specifically address needs for aerospace applications. Additive manufacturing technologies like EBF3 enable efficient design of materials and structures by tailoring microstructures and chemistries at the local level to improve performance at the global level. Additive manufacturing also facilitates design freedom by integrating assemblies into complex single-piece components, eliminating flanges, fasteners and joints, resulting in reduced size and mass. These same efficiencies that permit new design paradigms also lend themselves to supportability and sustainability. Long duration space missions will require a high degree of self-sustainability. EBF3 is a candidate technology being developed to allow astronauts to conduct repairs and fabricate new components and tools on demand, with efficient use of feedstock materials and energy.

Taminger, Karen M. B.↗
DOE OSTI2022

Massive star-forming galaxies have converted most of their halo gas into stars

In the local Universe, the efficiency for converting baryonic gas into stars is very low. In dark matter halos where galaxies form and evolve, the average efficiency varies with galaxy stellar mass and has a maximum of about 20% for Milky-Way-like galaxies. The low efficiency at higher mass is believed to be the result of some quenching processes, such as the feedback from active galactic nuclei. We perform an analysis of weak lensing and satellite kinematics for SDSS central galaxies. Our results reveal that the efficiency is much higher, more than 60%, for a large population of massive star-forming galaxies around 10 11 M ⊙ . This suggests that these galaxies acquired most of the gas in their halos and converted it into stars without being significantly affected by quenching processes. This population of galaxies is not reproduced in current galaxy formation models, indicating that our understanding of galaxy formation is incomplete. The implications of our results on circumgalactic media, star-formation quenching, and disk galaxy rotation curves are discussed. We also examine systematic uncertainties in halo-mass and stellar-mass measurements that might influence our results.

79 ASTRONOMY AND ASTROPHYSICS↗