Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetic pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Birkeland currents in an anisotropic, magnetostatic plasma

The paper derives an expression for the parallel current density for a plasma characterized by negligible bulk flow (magnetostatic velocity and a two-component (anisotropic) pressure tensor by expanding the equilibrium Vlasov equation for each species in the adiabatic parameter until such point as a nonvanishing moment j-parallel = integral d-cubed vv-parallel f is identified. The result is a nonlocal one: it relates j-parallel at one point s along a field line to j-parallel at another (reference) point s0 plus an integral function of the pressure and magnetic field between them. The equation derived by Vasyliunas (1970) is generalized and extended to a plasma in which the pressure tensor is comprised of two separate elements, P-perpendicular and P-parallel. This equation follows when P-perpendicular is set equal to P-parallel and s and s0 are taken to be at the ionosphere and the equator. These results are compared to others in the literature.

Birmingham, Thomas J.↗
DOE OSTI2021

Magnetic properties of the itinerant ferromagnet LaCrGe 3 under pressure studied by La 139 NMR

139 La nuclear magnetic resonance (NMR) measurements under pressure (p = 0 – 2.64 GPa) have been carried out to investigate the static and dynamic magnetic properties of the itinerant ferromagnet LaCrGe 3 . 139 La -NMR spectra for all measured pressures in the ferromagnetically ordered state show a large shift due to the internal field induction |B int | ~ 4 T at the La site produced by Cr ordered moments. The change in B int by less than 5% with p up to 2.64 GPa indicates that the Cr 3d moments are robust under pressure. The temperature dependence of NMR shift and B int suggest that the ferromagnetic order develops below ~50 K under higher pressures in a magnetic field of ~7.2 T. Based on the analysis of NMR data using the self-consistent-renormalization (SCR) theory, the spin fluctuations in the paramagnetic state well above T C are revealed to be three-dimensional ferromagnetic throughout the measured p region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2006

Electron Velocity Distribution Function in Magnetic Clouds in the Solar Wind

We present a study of the kinetic properties of the electron velocity distribution functions within magnetic clouds, since they are the dominant thermal component. The study is based on high time resolution data from the GSFC WIND/SWE electron spectrometer and the Berkeley 3DP electron plasma instruments. Recent studies on magnetic clouds have shown observational evidence of anti-correlation between the total electron density and electron temperature, which suggest a polytrope law P(sub e) = alpha(Nu(sub e) (sup gamma)) for electrons with the constant gamma approximates 0.5 < 1. This anti-correlation and small polytropic gamma-values is interpreted in the context of the presence of highly non-Maxwellian electron distributions (i.e. non-thermal) within magnetic clouds. These works suggested that the non-thermal electrons can contribute as much as 50% of the total electron pressure within magnetic clouds. We have revisited some of the magnetic cloud events previously studied and attempted to quantify the nature of the non-thermal electrons by modeling the electron velocity distribution function using a kappa distribution function to characterize the kinetic non-thermal effects. If non-thermal tail effects are the source for the anti-correlation between the moment electron temperature and density and if the kappa distribution is a reasonable representative model of non-thermal effects, then the electron velocity distribution within magnetic clouds should show indication for small K-values when gamma < 1.

Nieves-Chinchil, Teresa↗
NASA NTRS1999

Tail Lobe Revisited: Magnetic Field Modeling Based on Plasma Data

Plasma data from the ISEE-1 and -2 spacecraft during 1977-1980 have been used to determine the distribution of data points in the magnetotail in the range of distances -20 < XGSM < --15, i.e. which of the records that were located in the current sheet, in the tail lobe, in the magnetosheath and in the boundary layers respectively. The ISEE-1 and -2 magnetic field data for the records in the tail lobe were then used to model the tail lobe magnetic field dependence on the solar wind dynamic pressure, on the Interplanetary Magnetic Field (IMF) and on the Dst index. The tail lobe magnetic field was assumed to be dependent on the square root of the dynamic pressure based on the balance between the total magnetic pressure in the tail lobes and the dynamic pressure of the solar wind. The IMF dependent terms, added to the pressure term, were sought in many different forms while the Dst dependence of the tail lobe magnetic field was assumed to be linear. The field shows a strong dependence on the square root of the dynamic pressure and the different IMF dependent terms all constitute a significant contribution to the total field. However, the dependence on the Dst index turned out to be very weak at those down-tail distances. The results of this study are intended to be used for parameterizing future versions of the data-based models of the global magnetospheric magnetic field.

Karlsson, S. B. P.↗
NASA NTRS2008

The CME Flare Arcade and the Width of the CME in the Outer Corona

Moore, Sterling, & Suess (2007, ApJ, 668, 1221) present evidence that (1) a CME is typically a magnetic bubble, a low-beta gplasmoid with legs h having roughly the 3D shape of a light bulb, and (2) in the outer corona the CME plasmoid is in lateral pressure equilibrium with the ambient magnetic field. They present three CMEs observed by SOHO/LASCO, each from a very different source located near the limb. One of these CMEs came from a compact ejective eruption from a small part of a sunspot active region, another came from a large quiet-region filament eruption, and the third CME, an extremely large and fast one, was produced in tandem with an X20 flare arcade that was centered on a huge delta sunspot. Each of these CMEs had more or less the classic lightbulb silhouette and attained a constant heliocentric angular width in the outer corona. This indicates that the CME plasmoid attained lateral magnetic pressure balance with the ambient radial magnetic field in the outer corona. This lateral pressure balance, together with the standard scenario for CME production by the eruption of a sheared-core magnetic arcade, yields the following simple estimate of the strength B(sub Flare) of the magnetic field in the flare arcade produced together with the CME: B(sub Flare) 1.4(theta CME/theta Flare)sup 2 G, where theta (sub CME) is the heliocentric angular width of the CME plasmoid in the outer corona and theta (sub Flare) is the heliocentric angular width of the full-grown flare arcade. Conversely, theta (sub CME) approximately equal to (R(sub Sun)sup -1(phi(sub Flare)/1.4)sup 1/2 radians, where Flare is the magnetic flux covered by the full-grown flare arcade. In addition to presenting the three CMEs of Moore, Sterling, & Suess (2007) and their agreement with this relation between CME and Flare, we present a further empirical test of this relation. For CMEs that erupt from active regions, the co-produced flare arcade seldom if ever covers the entire active region: if AR is the total magnetic flux of the active region, Flare . AR, and we predict that CME. (R(sub Sun))sup -1(theta AR/1.4)sup 1/2 radians. For a random sample of 31 CMEs that erupted from active regions within 30 of the limb, for each CME we have measured CME from LASCO/C3 and have measured AR from a SOHO/MDI magnetogram of the source active region when it was within 30 of disk center. We find that each CME obeys the above predicted inequality, none having width greater than half of the upper bound given by theta(sub AR). Thus, an active region's magnetic flux content, together with its location on the solar disk, largely determines whether the active region can possibly produce a CME that is wide enough to intercept the Earth.

Moore, Ron↗
NASA NTRS2021

Physical Characteristics of Unstructured Coronal Clouds

Active regions in the inner solar corona, when observed in X-ray emission, consist of bright, hot loops surrounded by unstructured clouds. The emission from the clouds extends to a height of≈4–5×104km at temperatures of ≈2–3 MK. These “hot clouds” are variable, but persist for many days and do not appear to connect directly to the active region streamers or other large-scale structures observed higher in the corona. We present an observational analysis of these diffuse structures to establish basic plasma parameters such as magnetic field strength, particle density, and temperature. The values ofβ, the ratio of the plasma pressure to the magnetic field pressure, were found to be generally less than unity, though often approaching unity in the upper portions of the active region, where the hot clouds are located. The magnetic field may therefore only partially confine these regions and inhibit flare-like instabilities that could otherwise be driven by gradients of plasma pressure and current density.

The Sun↗
NASA NTRS1990

An improved method for simultaneous determination of frictional pressure drop and vapor volume fraction in vertical flow boiling

The two-phase frictional pressure drop and vapor volume fraction in the vertical boiling and adiabatic flow of the refrigerant, R11, have been simultaneously measured by a liquid balancing column and differential magnetic reluctance pressure transducers. An account is given of the experimental apparatus and procedure, data acquisition and analysis, and error estimation employed. All values of two-phase multipliers evaluated on the basis of the measured frictional pressure drop data in vertical upflow fall in the range bounded by the predictions of the Chisholm correlation and the homogeneous model.

Klausner, J. F.↗
DOE OSTI2020

Simulation of the eigenmode spectrum below the Toroidicity-induced Alfvén Eigenmode gap generated by the coupling of Alfvén and slow-magnetosonic waves in tokamaks

The discrete Alfven Eigenmode spectrum below the TAE frequency is studied for hybrid and sawtooth scenarios in tokamaks whereby the full coupling between the Alfven and slow magnetosonic waves are taken into account. In this frequency regime the ususally applied slow-sound approximation is not valid and modes in this frequency regime were recently called Alfven-Slow Eigenmodes (ASE). For the hybrid scenarios (central q ≈ 2 up to ρ ≈ 0.6) a rich spectrum of eigenmodes was found that depend on the plasma pressure and magnetic shear. It was found that the number of modes below the TAE gap is the highest for weakly reversed q~profiles while the number of modes increases with pressure. For zero central shear q-profiles the number of modes is lower than in the reversed shear case while for the normal shear hybrid q-profiles the number of eigenmode first increased with increasing pressure followed by a decrease in the number of eigenmodes. For plasma scenarios with central q < 1 (sawtoothing plasmas) modes were found outside the q=1 surface that are consistent with observations in contrast to the conventional BAE which located at the q=1 surface. The frequency behaviour of the modes below the TAE gap was studied for a reversed shear q-profile in which q_min was varied and it was found that ASEs increase and/or decrease in frequency as function of q_min thereby emerging from and/or disappearing into the continuum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Non-intrusive measurement of magnetic field strengths in a low-pressure argon plasma using quantum beat spectroscopy

Abstract Accurate measurement of magnetic field strengths is critical in many plasma environments, ranging from astrophysical systems to fusion energy research. In this work, a non-perturbative laser-based optical diagnostic known as quantum beat spectroscopy is demonstrated to be good alternative for measuring the magnetic field strength in low-pressure laboratory plasmas. The technique is investigated using both ns and fs pulsed lasers in an argon plasma. Preliminary results for a helium plasma are also given. Zeeman-split J = 1 electron states with transitions from metastable states were identified and tested for neutral argon ( 2 P 1 / 2 o ) 4 p 2 [ 1 / 2 ] and neutral helium 1 s 3 p 1 P 1 o . Magnetic fields are measured with sub-Gauss precision at near single laser pulse acquisition rates.

Gilbert, Tyler J. (ORCID:0000000160400119)↗
NASA NTRS1979

Compression of the Hermaean magnetosphere by the solar wind

The decrease of the volume of the dayside Hermaean magnetosphere with an increase in solar wind pressure is investigated, taking into account the effects of a conducting planetary core. A two-layer conductivity model is used to simulate the metallic core and outer silicate mantle of Mercury, and the magnetic field of the magnetosphere is modelled by a pure planet-centered axial dipole, the magnetopause current system by a pure axial dipole on the Mercury-sun line and the tail field by a semiinfinite current sheet. Results confirm the compression of the magnetic field and the increase in magnetic field pressures under most increased solar wind pressures in the presence of a planetary core, allowing a direct impact of the solar wind on the Hermaean surface to occur only 0.2% of the time.

Suess, S. T.↗
DOE OSTI2021

High-temperature superconductivity on the verge of a structural instability in lanthanum superhydride

Abstract The possibility of high, room-temperature superconductivity was predicted for metallic hydrogen in the 1960s. However, metallization and superconductivity of hydrogen are yet to be unambiguously demonstrated and may require pressures as high as 5 million atmospheres. Rare earth based “superhydrides”, such as LaH 10 , can be considered as a close approximation of metallic hydrogen even though they form at moderately lower pressures. In superhydrides the predominance of H-H metallic bonds and high superconducting transition temperatures bear the hallmarks of metallic hydrogen. Still, experimental studies revealing the key factors controlling their superconductivity are scarce. Here, we report the pressure and magnetic field dependence of the superconducting order observed in LaH 10 . We determine that the high-symmetry high-temperature superconducting Fm-3m phase of LaH 10 can be stabilized at substantially lower pressures than previously thought. We find a remarkable correlation between superconductivity and a structural instability indicating that lattice vibrations, responsible for the monoclinic structural distortions in LaH 10 , strongly affect the superconducting coupling.

36 MATERIALS SCIENCE↗
NASA NTRS1985

The location of the subsolar bow shock of Venus - Implications for the obstacle shape

The rise in periapsis altitude with time has allowed the Pioneer Venus spacecraft to begin probing the subsolar Venus bow shock. This has allowed the altitude of the subsolar bow shock to be determined by in situ observations for the first time. The observed altitude of 2280 km at the nose together with the previously determined terminator altitude can be used to infer the shape of the obstacle using the gasdynamic model of the solar wind interaction with Venus. When this shape is compared to the measured locations of the Venus ionopause (defined as the point where the magnetosheath magnetic field pressure and ionospheric thermal pressures are equal), it is found that the observed ionopause position is too low to qualify as the obstacle. It is inferred that a layer of the mass loaded plasma in the magnetosheath forms the magnetic barrier.

Russell, C. T.↗
NASA NTRS1981

The field and plasma configuration of a filament overlying a solar bipolar magnetic region

This paper presents an analytic model for a finite-size straight filament suspended horizontally in a steady state over a bipolar magnetic region. The equations of magnetostatic equilibrium are integrated exactly. The solution obtained illustrates the roles played by the electric current, magnetic field, pressure, and plasma weight in the balance of force everywhere in space. A specific example of a filament of diameter 50,000 km, with a density two orders of magnitude over the corona and supported by a magnetic field of about 4 gauss is included. The filament temperature can take values ranging from a small fraction to a few times the coronal temperature, depending on the internal electric current of the filament. To produce a cool filament, such as the quiescent prominence, the solution is required to have an internal field with a strong component along the filament, giving rise to helical structures. A hot filament such as the X-ray coronal loop can be produced as a twisted magnetic flux tube embedded in a strong background field aligned parallel to the filament and having lower density and temperature. The basic steps of construction can be used to develop models more realistic than the ones presented for their analytic simplicity.

Low, B. C.↗
NASA NTRS1977

Possible origins of time variability in Jupiter's outer magnetosphere. I - Variations in solar wind dynamic pressure. II - Variations in solar wind magnetic field

Attention is given to the effect of changes in the dynamic pressure of the solar wind on the structure of a centrifugally driven planetary wind from Jupiter. It is suggested that dynamic pressure variations can induce a transition between a super-Alfvenic wind and a sub-Alfvenic wind breeze on Jupiter's dayside. This could possibly account for the observed large-scale changes in the structure of Jupiter's outer magnetosphere. An attempt is then made to conceptually merge planetary wind models of Jupiter's outer magnetosphere with reconnection models of Jupiter's outer magnetosphere.

Coroniti, F. V.↗
NASA NTRS1981

Thrust and efficiency of a self-field MPD thruster

Thrust and efficiency of a quasi-steady multi-MW argon MPD thruster are determined for one-millisecond current pulses. Terminal voltage and impulse bit per pulse are measured for a benchmark thruster geometry on a swinging gate thrust stand in a dielectric vacuum tank, at a background pressure of 0.0001 torr, for a range of argon flow rates and arc currents. The quasi-steady thrust data scale quadratically with arc current, and confirm previous estimates of the electromagnetic and electrothermal components of thrust from magnetic and pressure probe measurements. Thruster efficiency is found to increase monotonically with specific impulse, reaching a value of 25% for 4.5 to 6.0 g/sec at 2000 seconds. Results of further experiments show that the inferred specific impulse for voltage fluctuation onset can be increased to 3000 seconds, and the thrust efficiency to above 30%.

Burton, R. L.↗
DOE OSTI2021

Formation of transient high-β plasmas in a magnetized, weakly collisional regime

We present experimental data providing evidence for the formation of transient (~20 μs) plasmas that are simultaneously weakly magnetized (i.e. Hall magnetization parameter ωτ > 1) and dominated by thermal pressure (i.e. ratio of thermal-to-magnetic pressure β > 1). Particle collisional mean free paths are an appreciable fraction of the overall system size. These plasmas are formed via the head-on merging of two plasmas launched by magnetized coaxial guns. The ratio λ gun = μ 0 I gun /ψ gun of gun current I gun to applied magnetic flux ψ gun is an experimental knob for exploring the parameter space of β and ωτ. These experiments were conducted on the Big Red Ball at the Wisconsin Plasma Physics Laboratory. The transient formation of such plasmas can potentially open up new regimes for the laboratory study of weakly collisional, magnetized, high-β plasma physics; processes relevant to astrophysical objects and phenomena; and novel magnetized plasma targets for magneto-inertial fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1995

Coronal roots of solar wind streams: 3-D MHD modeling

Weak (discontinuous) solutions of the 3-D MHD equations look like a promising tool to model the transonic solar wind with structural elements: current sheets, coronal plumes etc. Using the observational information about various coronal emissions one can include these structural elements into the 3-D MHD solar wind model by embedding the discontinuities of given type. Such 3-D MHD structured solar wind is calculated self-consistently: variants are examined via numerical experiments. In particular, the behavior of coronal plumes in the transonic solar wind flow, is modeled. The input information for numerical modeling (for example, the magnetic field map at the very base of the solar corona) can be adjusted so that fast stream arises over the center of the coronal hole, over the coronal hole boundaries and, even, over the region with closed magnetic topology. 3-D MHD equations have the analytical solution which can serve as a model of supersonic trans-alfvenic solar wind in the (5-20) solar radii heliocentric distance interval. The transverse, nonradial total (gas + magnetic field) pressure balance in the flow is the corner-stone of this solution. The solution describes the filamentation (ray-like structure of the solar corona) and streaming (formation of high-speed streams with velocities up to 800 km/sec) as a consequence of the magnetic field spatial inhomogeneous structure and trans-alfvenic character of the flow. The magnetic field works in the model as a 'controller' for the solar wind streaming and filamentation.

Pisanko, Yu. V.↗
NASA NTRS1995

Magnetohydrodynamic simulations of outflows from accretion disks

Magnetohydrodynamic simulations have been made of the formation of outflows from a Keplerian disk threaded by a magnetic field. The disk is treated as a boundary condition, where matter is ejected with Keplerian azimuthal speed and poloidal speed less than the slow magnetosonic velocity, and where boundary conditions on the magnetic field correspond to a highly conducting disk. Initially, the space above the disk, the corona, is filled with high specific entropy plasma in thermal equilibrium in the gravitational potential of the central object. The initial magnetic field is poloidal and is represented by a superposition of monopoles located below the plane of the disk. The rotation of the disk twists the initial poloidal magnetic field, and this twist propagates into the corona pushing and collimating matter into jetlike outflow in a cylindrical region. Matter outflowing from the disk flows and accelerates in the z-direction owing to both the magnetic and pressure gradient forces. The flow accelerates through the slow magnetosonic and Alfven surfaces and at larger distances through the fast magnetosonic surface. The flow velocity of the jet is approximately parallel to the z-axis, and the collimation results from the pinching force of the toroidal magnetic field. For a nonrotating disk no collimation is observed.

Ustyugova, G. V.↗