Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Substrate effect on in-plane dielectric and microwave properties of Ba(Sn{sub 0.15}Ti{sub 0.85})O{sub 3} thin films

The microstructure and in-plane dielectric and microwave properties of Barium tin titanate Ba(Sn{sub 0.15}Ti{sub 0.85})O{sub 3} (BTS) thin films grown on (1 0 0) LaAlO{sub 3} and (1 0 0) MgO single-crystal substrates through sol-gel process were investigated. X-ray diffraction and field emission scanning electron microscopy were used to characterize crystal structure of phases and microstructure of the thin films, respectively. Microwave properties of the films were measured from 1 to 10 GHz by the interdigital capacitor configuration. The obvious differences in the dielectric and microwave properties are attributed to the stress in the films, which result from the lattice mismatch and difference in the thermal expansion coefficients between the film and substrates. This work clearly reveals the highly promising potential of BTS films for application in tunable microwave devices.

36 MATERIALS SCIENCE↗

Influence of ZnO on the crystallization kinetics and properties of diopside-Ca-Tschermak based glasses and glass-ceramics

We report on the influence of ZnO on the structural, thermal, and crystallization behavior of the diopside-Ca-Tschermak based glasses, and on the processing, microstructure, and the properties of the sintered glass ceramics. Four glasses with nominal compositions of CaMg{sub 0.8}Al{sub 0.4}Si{sub 1.8}O{sub 6}, CaMg{sub 0.75}Zn{sub 0.05}Al{sub 0.4}Si{sub 1.8}O{sub 6}, CaMg{sub 0.70}Zn{sub 0.10}Al{sub 0.4}Si{sub 1.8}O{sub 6}, and CaMg{sub 0.60}Zn{sub 0.20}Al{sub 0.4}Si{sub 1.8}O{sub 6} were obtained by melting at 1580 deg. C for 1 h. Structural and thermal behavior of the glasses was investigated by Fourier-transform infrared spectroscopy, density measurements, dilatometry, and differential thermal analysis. Nonisothermal crystallization kinetics has been employed to study the crystallization mechanism in the glasses. Sintering, crystallization, microstructure, and properties of the glass ceramics were investigated under nonisothermal heating conditions in the temperature range of 850-1000 deg. C.

36 MATERIALS SCIENCE↗

Mixed oxides of sodium, antimony (5+) and divalent metals (Ni, Co, Zn or Mg)

A family of alpha-NaFeO{sub 2}-type oxides Na{sub x}M{sub (1+x)/3}Sb{sub (2-x)/3}O{sub 2} (M=Ni, Co, Zn, Mg; x{approx}0.8 or 0.9) has been prepared by solid state reactions and characterized by powder XRD. At x=1, ordering occurs with tripling the unit cells and formula units. The powder patterns for Na{sub 3}M{sub 2}SbO{sub 6} (M=Ni, Co) comply with both trigonal P3{sub 1}12 cell and monoclinic C2/m cell. The Ni compound exhibits also a series of extremely weak reflections (I<0.3%) that need doubling of the c axis, and the final cell is C2/c, a=5.3048(3), b=9.1879(4), c=10.8356(7), beta=99.390(5). These ambiguities are explained by stacking faults. The compounds absorb atmospheric moisture with c-axis expansion up to 29%. A delafossite-related superlattice Ag{sub 3}Co{sub 2}SbO{sub 6} has been prepared by ion exchange and refined: P3{sub 1}12, a=5.3842(2), c=18.6613(10). Ionic conductivity of the Na{sub 0.8}Ni{sub 0.6}Sb{sub 0.4}O{sub 2} ceramics, 0.4 S/m at 300 deg. C, is greater than reported previously, presumably owing to the grain orientation produced by hot pressing. - Graphical abstract: It is shown that the powder patterns for Na{sub 3}M{sub 2}SbO{sub 6} (M=Ni and Co) may be equally well described by a trigonal P3{sub 1}12 cell and a monoclinic C2/m cell. In addition, the Ni compound exhibits a series of extremely weak reflections (I<0.3%) that need doubling of the monoclinic c axis, and the final cell is C2/c.

36 MATERIALS SCIENCE↗

Sensitized red luminescence from Ce{sup 3+}, Mn{sup 2+}-doped glaserite-type alkaline-earth silicates

Bright red luminescence is observed from Ce, Mn-doped glaserite-type alkaline-earth silicates with M{sub 2}BaMgSi{sub 2}O{sub 8} (M: Ba, Sr, Ca) chemical composition. Under UV excitation, Ce-doped M{sub 2}BaMgSi{sub 2}O{sub 8} exhibits strong near-UV emission with asymmetric peak shape. UV-excited Mn-doped M{sub 2}BaMgSi{sub 2}O{sub 8} compounds show visible red emission only when Ce{sup 3+} ions are doped together. These results indicate that Mn{sup 2+}-derived red emission is caused by an efficient energy transfer from Ce{sup 3+} to Mn{sup 2+}. The red emission becomes intense with an increase in Ba-amount. This trend originates from the relaxation of the selection rule for 3d-3d transition in Mn{sup 2+} ions, which is caused by the structural deformation due to Ba{sup 2+} occupation for layer-pockets. - Graphical abstract: Glaserite-type red emitting phosphor, M{sub 2}BaMgSi{sub 2}O{sub 8}: Ce{sup 3+}, Mn{sup 2+} (M: Ba, Sr, Ca), was prepared by solid state reaction. Under UV excitation, Mn{sup 2+}-derived red emission is observed from the compounds only when Ce{sup 3+} ions are codoped, indicating that the red emission is caused by an energy transfer from Ce{sup 3+} to Mn{sup 2+}.

36 MATERIALS SCIENCE↗

Ab-initio calculations of semiconductor MgGeP{sub 2} and MgGeAs{sub 2}

Highlights: • MgGeP{sub 2} and MgGeAs{sub 2} are semiconductor compounds. • MgGeP{sub 2} and MgGeAs{sub 2} are energetically, mechanically and dynamically stable. • The electronic charge density contour plot shows that the nature of bonding is a mixture of ionic-covalent. - Abstract: In this study, we focus on structural, electronic, elastic, lattice dynamic and optic properties of MgGeP{sub 2} and MgGeAs{sub 2} using ab-initio density-functional theory (DFT) within Armiento-Mattson 2005 (AM05) scheme of the generalized gradient approximation (GGA) for the exchange-correlation potential. Our computed structural results are in reasonable agreement with the literature. The band gap of these compounds is predicted to be direct. Our elastic results prove that these compounds are mechanically stable. The obtained phonon spectra of MgGeP{sub 2} and MgGeAs{sub 2} do not exhibit any significant imaginary branches using GGA-AM05 for the exchange-correlation approximation. Further analysis of the optical response of the dielectric functions, optical reflectivity, refractive index, extinction coefficient and electron energy loss delves into for the energy range of 0–22.5 eV. It motivated that there exists an optical polarization anisotropy of these compounds for optoelectronic device applications.

36 MATERIALS SCIENCE↗

Mesoporous nitrogen-doped carbon microfibers derived from Mg-biquinoline-dicarboxy compound for efficient oxygen electroreduction

An in-situ MgO-templating synthesis route was introduced to obtain the mesoporous nitrogen-doped carbon microfibers by thermal conversion of new Mg-2,2′-biquinoline 4,4-dicarboxy acid coordination compound (Mg-DCA) microfibers. The investigated crystal structure of Mg-DCA testified that the assembling of Mg{sup 2+} and DCA through Mg-O coordination bond and hydrogen bond contributed to the formation of one-dimensional (1D) crystalline Mg-DCA microfibers. The nitrogen-doped carbons derived from the pyrolysis of Mg-DCA showed the well-defined microfiber morphology with high mesopore-surface area. Such mesoporous microfibers exhibited the efficient catalytic activity for oxygen reduction reaction (ORR) in alkaline solutions with better stability and methanol-tolerance performance. - Graphical abstract: Mesoporous nitrogen-doped carbon microfibers with efficient oxygen electroreduction activity were prepared by thermal conversion of new Mg-biquinoline-based coordination compound microfibers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic magnetic properties of the triangular plane lattice material TmMgGaO4

Highlights: • TmMgGaO{sub 4} crystallizes in the R-3m space group with the YbFe{sub 2}O{sub 4} structure. • TmMgGaO{sub 4} exhibits geometric magnetic frustration with no ordering down to 1.8 K. • Magnetic properties of TmMgGaO{sub 4} are highly anisotropic. - Abstract: The crystal growth, structure, and basic magnetic properties of TmMgGaO{sub 4} are reported. The Tm ions are located in a planar triangular lattice consisting of distorted TmO{sub 6} octahedra, while the Mg and Ga atoms randomly occupy intermediary bilayers of M-O triangular bipyramids. The Tm ions are positionally disordered. The material displays an antiferromagnetic Curie Weiss theta of ∼−20 −25 K, with no clear ordering visible in the magnetic susceptibility down to 1.8 K; the structure and magnetic properties suggest that ordering of the magnetic moments is frustrated by both structural disorder and the triangular magnetic motif. Single crystal magnetization measurements indicate that the magnetic properties are highly anisotropic, with large moments measured perpendicular to the triangular planes. At 2 K, a broad step-like feature is seen in the field-dependent magnetization perpendicular to the plane on applied field near 2 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic strain effects on the photoluminescence emission from heteroepitaxial and homoepitaxial nonpolar (Zn,Mg)O/ZnO quantum wells

We report on the properties of nonpolar a-plane (Zn,Mg)O/ZnO quantum wells (QW) grown by molecular beam epitaxy on r plane sapphire and a plane ZnO substrates. For the QWs grown on sapphire, the anisotropy of the lattice parameters of the (Zn,Mg)O barrier gives rise to an unusual in-plane strain state in the ZnO QWs, which induces a strong blue-shift of the excitonic transitions, in addition to the confinement effects. We observe this blue-shift in photoluminescence excitation experiments. The photoluminescence excitation energies of the QWs are satisfactorily simulated when taking into account the variation of the exciton binding energy with the QW width and the residual anisotropic strain. Then we compare the photoluminescence properties of homoepitaxial QWs grown on ZnO bulk substrate and heteroepitaxial QWs grown on sapphire. We show that the reduction of structural defects and the improvement of surface morphology are correlated with a strong enhancement of the photoluminescence properties: reduction of full width at half maximum, strong increase of the luminescence intensities. The comparison convincingly demonstrates the interest of homoepitaxial nonpolar QWs for bright UV emission applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mineralogy at Gusev Crater from the Mossbauer spectrometer on the Spirit Rover

Mossbauer spectra measured on Mars by the Spirit rover during the primary mission are characterized by two ferrous iron doublets (olivine and probably pyroxene) and a ferric iron doublet (tentatively associated to nanophase ferric iron oxide). Two sextets resulting from nonstoichiometric magnetite are also present, except for a coating on the rock Mazatzal, where a hematite-like sextet is present. Greater proportions of ferric-bearing phases are associated with undisturbed soils and rock surfaces as compared to fresh rock surfaces exposed by grinding. The ubiquitous presence of olivine in soil suggests that physical rather than chemical weathering processes currently dominate at Gusev crater.

Minerals↗

Role of SrMoO{sub 4} in Sr{sub 2}MgMoO{sub 6} synthesis

Here we investigate the elemental and phase compositions during the solid-state synthesis of the promising SOFC-anode material, Sr{sub 2}MgMoO{sub 6}, and demonstrate that molybdenum does not notably evaporate under the normal synthesis conditions with temperatures up to 1200 {sup o}C due to the formation of SrMoO{sub 4} as an intermediate product at low temperatures, below 600 {sup o}C. However, partial decomposition of the Sr{sub 2}MgMoO{sub 6} phase becomes evident at the higher temperatures ({approx}1500 {sup o}C). The effect of SrMoO{sub 4} on the electrical conductivity of Sr{sub 2}MgMoO{sub 6} is evaluated by preparing a series of Sr{sub 2}MgMoO{sub 6} samples with different amounts of additional SrMoO{sub 4}. Under the reducing operation conditions of an SOFC anode the insulating SrMoO{sub 4} phase is apparently reduced to the highly conductive SrMoO{sub 3} phase. Percolation takes place with 20-30 wt% of SrMoO{sub 4} in a Sr{sub 2}MgMoO{sub 6} matrix, with a notable increase in electrical conductivity after reduction. Conductivity values of 14, 60 and 160 S/cm are determined at 800 {sup o}C in 5% H{sub 2}/Ar for the Sr{sub 2}MgMoO{sub 6} samples with 30, 40 and 50 wt% of added SrMoO{sub 4}, respectively. -- Graphical abstract: SrMoO{sub 4} is formed at low temperatures during the synthesis of Sr{sub 2}MgMoO{sub 6}, which prevents the volatilization of Mo from typical precursor mixtures of this promising SOFC anode material. SrMoO{sub 4} is insulating and it is often found as an impurity in Sr{sub 2}MgMoO{sub 6} samples. It is however readily reduced to highly conducting SrMoO{sub 3}. Composites of Sr{sub 2}MgMoO{sub 6} and SrMoO{sub 3} show increased electrical conductivities compared to pure Sr{sub 2}MgMoO{sub 6} under the reductive operation conditions of an SOFC anode. Display Omitted Highlights: {yields} Sr{sub 2}MgMoO{sub 6} is a promising SOFC anode material. {yields} During the Sr{sub 2}MgMoO{sub 6} synthesis SrMoO{sub 4} is formed at low temperatures. {yields} Formation of SrMoO{sub 4} effectively prevents volatilization of Mo at high temperatures. {yields} Insulating SrMoO{sub 4} reduces to highly conductive SrMoO{sub 3} under SOFC-anode conditions. {yields} Composites of Sr{sub 2}MgMoO{sub 6} and SrMoO{sub 3} show high electrical conductivities.

36 MATERIALS SCIENCE↗

Surface stoichiometry and activity control for atomically smooth low dislocation density ZnO and pseudomorphic MgZnO epitaxy on a Zn-polar ZnO substrate by the helicon-wave-excited-plasma sputtering epitaxy method

The helicon-wave-excited-plasma sputtering (HWPS) method was exemplified to be one of the versatile epitaxial growth techniques for the fabrication of low dislocation density semiconductor epilayers and heterostructures exhibiting atomically smooth surface morphology. For a case study, ZnO homoepitaxy and Mg{sub x}Zn{sub 1-x}O (x=0.08,0.19) heteroepitaxy on a Zn-polar ZnO substrate were carried out. According to the surface damage-free property, high temperature growth with appropriate stoichiometry control enabled the growth of ZnO homoepitaxial layers exhibiting a smooth surface morphology with 0.26 nm high monolayer atomic steps. Their tilt and twist mosaics reflecting the threading dislocation densities having screw and edge components were comparable to those of the substrate, being under the resolution limit (18 arcsec). The surface morphology and crystal mosaicity of pseudomorphic Mg{sub x}Zn{sub 1-x}O (x{<=}0.19) epilayers were quite similar to those of the ZnO underlayer. The luminescence spectra of the ZnO and Mg{sub x}Zn{sub 1-x}O epilayers at 293 K exhibited a predominant near-band-edge emission and negligible broad emission bands due to deep levels. The results indicate that the growth mode of the HWPS method resembles that of molecular beam epitaxy methods.

36 MATERIALS SCIENCE↗

Oxygen-vacancy concentration in A{sub 2}MgMoO{sub 6-{delta}} double-perovskite oxides

Accurate oxygen-content analysis by means of a coulometric redox titration method specially devised for the purpose shows that as-synthesized (in 5% H{sub 2}/Ar) samples of the recently reported novel solid oxide fuel cells anode material Sr{sub 2}MgMoO{sub 6-{delta}} contain oxygen vacancies with a concentration of {delta}{approx}0.05. Oxygen contents and the resultant Mo-valence values are also analyzed for various A{sub 2}MgMoO{sub 6-{delta}} samples in order to reveal both the isovalent and aliovalent A-site cation substitution effects. - Graphical Abstract: A highly reproducible coulometric redox titration method has been developed to accurately analyze the mixed V/VI valence state of molybdenum and thereby the oxygen content in the recently reported SOFC-anode materials of A{sub 2}MgMoO{sub 6-{delta}}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

EFFECTS OF SINTERING TEMPERATURE ON SUPERCONDUCTIVITY IN Ti-SHEATHED MgB{sub 2} WIRES

The effects of sintering temperature on the superconducting properties of Ti-sheathed MgB{sub 2} wires have been studied. The wires were fabricated by in situ powder-in-tube (PIT) method and characterized by x-ray diffraction, magnetization, scanning electron microscopy and transport measurements. Samples were sintered for 30 minutes at the following temperatures: 650 deg. C, 700 deg. C, 750 deg. C, 800 deg. C, and 850 deg. C. It is found that the cores of these wires are almost in pure MgB{sub 2} superconducting phase, indicating that the Ti-sheath does not react with Mg or B. The superconducting transition temperature T{sub c} decreases from 36 K to 34.2 K with the decrease of the sintering temperature from 850 deg. C to 650 deg. C. At 5 K and 20 K, critical current density J{sub c} peaks up for samples sintered at 800 deg. C, which is in sharp contrast with previously reported result that for Fe-sheathed MgB{sub 2} wires, J{sub c} peaks up at sintering temperature of 650 deg. C.

36 MATERIALS SCIENCE↗

The electronic and magnetic properties of La{sub 0.85}Zr{sub 0.15}MnO{sub 3} deposited on SrTiO{sub 3} and MgO substrates

The electronic and magnetic properties of tetravalent-ion-doped La{sub 0.85}Zr{sub 0.15}MnO{sub 3} (LZMO) thin films that were epitaxially grown on SrTiO{sub 3} (STO) and MgO substrates were studied using temperature-dependent x-ray diffraction (XRD), x-ray absorption near-edge structure, x-ray linear dichroism, and x-ray magnetic circular dichroism at the Mn L{sub 3,2}- and K-edge. XRD studies reveal that the LZMO thin films have compressive and tensile strains (along the c-axis) on the STO and MgO substrates, respectively. As the temperature is reduced from room temperature to below magnetic transition temperature, the preferentially occupied Mn majority-spin e{sub g} orbital changes from the in-plane d{sub x}{sup 2}{sub -y}{sup 2} to the out-of-plane d{sub 3z}{sup 2}{sub -r}{sup 2} orbital for LZMO/STO, and vice versa for LZMO/MgO. Experimental results suggest that the new hopping path that is mediated by the Mn{sup 2+} ions triggers a stronger d{sub 3z}{sup 2}{sub -r}{sup 2} orbital ordering of Mn{sup 3+} ions and enhances the ferromagnetic coupling between the Mn spin moments of t{sub 2g} electrons in LZMO/STO, whereas the strong tensile strain stabilizes the d{sub x}{sup 2}{sub -y}{sup 2} orbital by inducing lattice distortions of the MnO{sub 6} octahedra in LZMO/MgO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of dislocations in hcp metals through the investigation of the (1121) twin boundary

Herein, we use first principles calculations to study the energy of the (1121) twin boundary in Zr, Zn, Mg, Ti, and Be. This boundary is important for understanding the microyielding and damping of hexagonal close-packed metals. The (1121) twin boundary is unique in that it is composed of--and can form by the glide of--basal dislocations nucleating at every c lattice parameter. The effect of the number of atoms between boundaries on the boundary energy, and the resulting lattice strains of the relaxed structures are quantified. It is shown that the energies obtained converge within 32-64 atoms/supercell. The structures with a higher second-order elastic constant term, c{sub 44}, also have higher boundary energies. It is further shown that the critical resolved shear stresses of the basal dislocations at 0 K, which make up the (1121) twin, are so low as to be below the threshold of the first principles calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Annealing on the Properties of AW5754 Aluminum Alloy-AZ31B Magnesium Alloy Explosively Welded Bimetals

Explosive welding of AW5754 aluminum alloy to AZ31B magnesium alloy was performed. AW5754 was proposed as a flyer plate. A parallel setup was used during explosive welding. The annealing of AW5754/AZ31B composite plate at 250, 300 and 350 °C for 2, 3, 4 and 5 h was performed after explosive welding. Bimetals were characterized by regular wavy interface. Annealing resulted in the creation of intermetallic compounds (IMCs). The increase in the thickness of IMC interfacial layer was observed with increasing of annealing temperature and time. IMC layer of highest thickness was recorded after annealing at 350 °C for 5 h and averaged 67 µm. EDS analysis showed that the interfacial layer close to AW5754 alloy was formed by Al{sub 3}Mg{sub 2} IMC, and interfacial layer adjacent to the AZ31B alloy consisted of Mg{sub 17}Al{sub 12} IMC. Bright particles were spread at the AW5754-Al{sub 3}Mg{sub 2} IMC interface. Rise in the microhardness at the interface of produced bimetal was associated with work hardening. Microhardness values increased to 218 HV0.025 after annealing process due to IMCs present at the interface. Decrease in microhardness in locations close to the IMC interfacial layer was found after heat treatment due to recrystallization. The bimetal tensile strength reached 120 MPa. The annealing resulted in decrease in the bimetal tensile strength.

36 MATERIALS SCIENCE↗

Two dimensional electron gases in polycrystalline MgZnO/ZnO heterostructures grown by rf-sputtering process

This paper reports the formation of two-dimensional electron gas (2DEG) in rf-sputtered defective polycrystalline MgZnO/ZnO heterostructure via the screening of grain boundary potential by polarization-induced charges. As the MgZnO thickness increases, the sheet resistance reduces rapidly and then saturates. The enhancement of the interfacial polarization effect becomes stronger, corresponding to a larger amount of resistance reduction, when the Mg content in the cap layer increases. Monte Carlo method by including grain boundary scattering effect as well as 2D finite-element-method Poisson and drift-diffusion solver is applied to analyze the polycrystalline heterostructure. The experimental and Monte Carlo simulation results show good agreement. From low temperature Hall measurement, the carrier density and mobility are both independent of temperature, indicating the formation of 2DEG with roughness scattering at the MgZnO/ZnO interface.

36 MATERIALS SCIENCE↗

Density Functional Study of Perovskite Superconductor MgCNi{sub 3}

We here report the first principle density functional study of MgCNi{sub 3} which crystallize in cubic perovskite structure having critical transition temperature of 8 K. The interesting aspect of this compound is that in normal state it is non magnetic in nature despite conduction electrons in it are derived from partially filled Ni d states, which typically lead to ferromagnetism in metallic Ni and many Ni-based binary alloys. To investigate the detailed microscopic origin of the non magnetic nature we have done density functional based calculations on this compound. The lattice constant is calculated using minimum energy criteria from total energy versus lattice constant plot. By taking the calculated values of lattice constant we have done the precise calculations on the compound using Full Potential Linear Augmented Plane Wave (FP-LAPW) method implemented in ELK code. The electronic density of states is found spin degenerate that corresponds to a non-magnetic ground state. The density of states (DOS) at Fermi level, N(E{sub F}) is dominated by Ni-d states. The sharp peak observed just below Fermi level corresponds to van Hove singularity (vHs). The projected density of states (PDOS) suggests a strong hybridization of Ni-3d and C-2p states which is responsible for the observed non magnetic nature of MgCNi{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗