Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Naphthalene and acenaphthene decomposition by electron beam generated plasma application

The application of non-thermal plasma generated by electron beam (EB) was investigated in laboratory scale to study decomposition of polycyclic aromatic hydrocarbons like naphthalene and acenaphthene in flue gas. PAH compounds were treated by EB with the dose up to 8 kGy in dry and humid base gas mixtures. Experimentally established G-values gained 1.66 and 3.72 mol/100 eV for NL and AC at the dose of 1 kGy. NL and AC removal was observed in dry base gas mixtures showing that the reaction with OH radical is not exclusive pathway to initialize PAH decomposition; however in the presence of water remarkably higher decomposition efficiency was observed. As by-products of NL decomposition were identified compounds containing one aromatic ring and oxygen atoms besides CO and CO{sub 2}. It led to the conclusion that PAH decomposition process in humid flue gas can be regarded as multi-step oxidative de-aromatization analogical to its atmospheric chemistry.

01 COAL, LIGNITE, AND PEAT↗

The effect of oxygen and water vapor on nitric oxide conversion with a dielectric barrier discharge reactor

The effect of O{sub 2} and H{sub 2}O vapor on the Nitric oxide (NO) removal rate, the NO{sub 2} generation rate and the discharge characteristics were investigated using the dielectric barrier discharge (DBD) reactor at 1 atm pressure and at room temperature (20{sup o}). The results showed that the O{sub 2} present in the flue gas always hampered the removal of NO and the generation of N{sub 2}O, but that the O{sub 2} could enhance the generation of NO{sub 2} in the NO/N{sub 2}/O{sub 2} mixtures. Furthermore, with the increase of oxygen, the average discharge current gradually decreases in the reactor. The H{sub 2}O present in N-2/NO hindered the removal of NO and the generation of NO{sub 2} but had no impact on the average discharge current in the reactor in the NO/N{sub 2}/H{sub 2}O mixtures in which the HNO{sub 2} and HNO{sub 3} was detected. The energy efficiency of the DBD used to remove the NO from the flue gas was also estimated.

01 COAL, LIGNITE, AND PEAT↗

Determinants of contract duration: further evidence from coal-fired power plants

Transactions cost theory predicts that the availability of alternatives is one of the determinants of contract duration. Over the last 20 years, the coal market has seen many regulatory changes that have generally increased the number of alternatives in the process of procuring coal. In this paper data from long-term coal contracts for electricity generation signed before 1999 are used to estimate the effect of increasing alternatives on contract duration. Empirical results tend to match transactions cost theory that increased alternatives reduces contract duration.

01 COAL, LIGNITE, AND PEAT↗

Fischer-Tropsch Synthesis: Influence of CO Conversion on Selectivities H2/CO Usage Ratios and Catalyst Stability for a 0.27 percent Ru 25 percent Co/Al2O3 using a Slurry Phase Reactor

The effect of CO conversion on hydrocarbon selectivities (i.e., CH{sub 4}, C{sub 5+}, olefin and paraffin), H{sub 2}/CO usage ratios, CO{sub 2} selectivity, and catalyst stability over a wide range of CO conversion (12-94%) on 0.27%Ru-25%Co/Al{sub 2}O{sub 3} catalyst was studied under the conditions of 220 C, 1.5 MPa, H{sub 2}/CO feed ratio of 2.1 and gas space velocities of 0.3-15 NL/g-cat/h in a 1-L continuously stirred tank reactor (CSTR). Catalyst samples were withdrawn from the CSTR at different CO conversion levels, and Co phases (Co, CoO) in the slurry samples were characterized by XANES, and in the case of the fresh catalysts, EXAFS as well. Ru was responsible for increasing the extent of Co reduction, thus boosting the active site density. At 1%Ru loading, EXAFS indicates that coordination of Ru at the atomic level was virtually solely with Co. It was found that the selectivities to CH{sub 4}, C{sub 5+}, and CO{sub 2} on the Co catalyst are functions of CO conversion. At high CO conversions, i.e. above 80%, CH{sub 4} selectivity experienced a change in the trend, and began to increase, and CO{sub 2} selectivity experienced a rapid increase. H{sub 2}/CO usage ratio and olefin content were found to decrease with increasing CO conversion in the range of 12-94%. The observed results are consistent with water reoxidation of Co during FTS at high conversion. XANES spectroscopy of used catalyst samples displayed spectra consistent with the presence of more CoO at higher CO conversion levels.

01 COAL, LIGNITE, AND PEAT↗

An Electron Microscopy Investigation of the Transient Stage Oxidation Products in an Fe-22Cr Alloy with Ce and La Additions Exposed to Dry Air at 1073 K (800 °C)

In this study, the effects of Ce (270 ppm) and La (120 ppm) mischmetal additions on the transient oxidation of an Fe-22Cr alloy were investigated. The oxidation process was imaged in situ using a confocal scanning laser microscope. The oxidation microstructures were studied by scanning electron microscopy, energy dispersive X-ray analysis, and transmission electron microscopy with the help of focused ion beam in situ lift-out specimen preparation. The Ce and La, referred to as reactive elements, were found in nonmetallic inclusion particles in the forms of oxides, sulfides, and phosphates. An affected zone formed around rare earth (RE)-containing inclusion particles at the alloy free surface during the transient oxidation. This zone consisted of an internal Cr-oxide formed beneath the particle as well as a thinner external oxide scale on the surface compared with the surroundings. The relation of this microstructure to oxidation kinetics is discussed. With time, the RE elements diffused into the scale from the RE particles on the alloy surface during the high-temperature exposure. A diffusion mechanism is presented to describe these observations.

01 COAL, LIGNITE, AND PEAT↗

Mathematical modeling of the kinetics of carbothermic reduction of iron oxides in ore-coal composite pellets

The kinetics of the carbothermic reduction of iron oxides in a composite pellet made of taconite concentrate and high-volatility coal has been studied by means of mathematical modeling that simultaneously takes into account the transfer rates of both the mass and the heat, and the rates of chemical reactions. The computational results, which have been validated with experimental data in the literature, confirm that the overall rate of the carbothermic reduction, which is strongly endothermic, is limited by heat-transfer steps. From a kinetics viewpoint, the optimum composition of the composite pellet is approximately in accordance with the stoichiometry, when CO is assumed to be the sole oxide of carbon in the gas. To raise the temperature of the pellet from its ambient value to furnace temperature, the heat required is greater than that needed for sustaining all chemical reactions, including the Boudouard reaction. The gaseous product consists mainly of CO and H{sub 2}, except in the very initial stage. The overall observable reaction rate, in terms of the volumetric rate of the generation of gases, peaks at approximately 30 seconds of reaction time.

01 COAL, LIGNITE, AND PEAT↗

Reduction of iron-oxide-carbon composites: part I. Estimation of the rate constants

A new ironmaking concept using iron-oxide-carbon composite pellets has been proposed, which involves the combination of a rotary hearth furnace (RHF) and an iron bath smelter. This part of the research focuses on studying the two primary chemical kinetic steps. Efforts have been made to experimentally measure the kinetics of the carbon gasification by CO{sub 2} and wustite reduction by CO by isolating them from the influence of heat- and mass-transport steps. A combined reaction model was used to interpret the experimental data and determine the rate constants. Results showed that the reduction is likely to be influenced by the chemical kinetics of both carbon oxidation and wustite reduction at the temperatures of interest. Devolatilized wood-charcoal was observed to be a far more reactive form of carbon in comparison to coal-char. Sintering of the iron-oxide at the high temperatures of interest was found to exert a considerable influence on the reactivity of wustite by virtue of altering the internal pore surface area available for the reaction. Sintering was found to be predominant for highly porous oxides and less of an influence on the denser ores. It was found using an indirect measurement technique that the rate constants for wustite reduction were higher for the porous iron-oxide than dense hematite ore at higher temperatures (> 1423 K). Such an indirect mode of measurement was used to minimize the influence of sintering of the porous oxide at these temperatures.

01 COAL, LIGNITE, AND PEAT↗

Reduction of iron-oxide-carbon composites: part III. Shrinkage of composite pellets during reduction

This article involves the evaluation of the volume change of iron-oxide-carbon composite pellets and its implications on reduction kinetics under conditions prevalent in a rotary hearth furnace (RHF) that were simulated in the laboratory. The pellets, in general, were found to shrink considerably during the reduction due to the loss of carbon and oxygen from the system, sintering of the iron-oxide, and formation of a molten slag phase at localized regions inside the pellets due to the presence of binder and coal/wood-charcoal ash at the reduction temperatures. One of the shortcomings of the RHF ironmaking process has been the inability to use multiple layers of composite pellets because of the impediment in heat transport to the lower layers of a multilayer bed. However, pellet shrinkage was found to have a strong effect on the reduction kinetics by virtue of enhancing the external heat transport to the lower layers. The volume change of the different kinds of composite pellets was studied as a function of reduction temperature and time. The estimation of the change in the amount of external heat transport with varying pellet sizes for a particular layer of a multilayer bed was obtained by conducting heat-transfer tests using inert low-carbon steel spheres. It was found that if the pellets of the top layer of the bed shrink by 30 pct, the external heat transfer to the second layer increases by nearly 6 times.

01 COAL, LIGNITE, AND PEAT↗

Reduction of iron-oxide-carbon composites: part II. Rates of reduction of composite pellets in a rotary hearth furnace simulator

A new ironmaking concept is being proposed that involves the combination of a rotary hearth furnace (RHF) with an iron-bath smelter. The RHF makes use of iron-oxide-carbon composite pellets as the charge material and the final product is direct-reduced iron (DRI) in the solid or molten state. This part of the research includes the development of a reactor that simulated the heat transfer in an RHF. The external heat-transport and high heating rates were simulated by means of infrared (IR) emitting lamps. The reaction rates were measured by analyzing the off-gas and computing both the amount of CO and CO{sub 2} generated and the degree of reduction. The reduction times were found to be comparable to the residence times observed in industrial RHFs. Both artificial ferric oxide (PAH) and naturally occurring hematite and taconite ores were used as the sources of iron oxide. Coal char and devolatilized wood charcoal were the reductants. Wood charcoal appeared to be a faster reductant than coal char. However, in the PAH-containing pellets, the reverse was found to be true because of heat-transfer limitations. For the same type of reductant, hematite-containing pellets were observed to reduce faster than taconite-containing pellets because of the development of internal porosity due to cracking and fissure formation during the Fe2O{sub 3}-to-Fe3O{sub 4} transition. This is, however, absent during the reduction of taconite, which is primarily Fe3O{sub 4}. The PAH-wood-charcoal pellets were found to undergo a significant amount of swelling at low-temperature conditions, which impeded the external heat transport to the lower layers. If the average degree of reduction targeted in an RHF is reduced from 95 to approximately 70 pct by coupling the RHF with a bath smelter, the productivity of the RHF can be enhanced 1.5 to 2 times. The use of a two- or three-layer bed was found to be superior to that of a single layer, for higher productivities.

01 COAL, LIGNITE, AND PEAT↗

Removal of metallic iron on oxide slags

It is possible, in some cases, for ground coal particles to react with gasifier gas during combustion, allowing the ash material in the coal to form phases besides the expected slag phase. One of these phases is metallic iron, because some gasifiers are designed to operate under a reducing atmosphere (pO{sub 2}) of approximately 10{sup -4} atm). Metallic iron can become entrained in the gas stream and deposit on, and foul, downstream equipment. To improve the understanding of the reaction between different metallic iron particles and gas, which eventually oxidizes them, and the slag that the resulting oxide dissolves in, the kinetics of iron reaction on slag were predicted using gas-phase mass-transfer limitations for the reaction and were compared with diffusion in the slag; the reaction itself was observed under confocal scanning laser microscopy. The expected rates for iron droplet removal are provided based on the size and effective partial pressure of oxygen, and it is found that decarburization occurs before iron reaction, leading to an extra 30- to 100-second delay for carbon-saturated particles vs pure iron particles. A pure metallic iron particle of 0.5 mg should be removed in about 220 seconds at 1400{sup o}C and in 160 seconds at 1600{sup o}C.

01 COAL, LIGNITE, AND PEAT↗

Improving the Desulphurization in COREX Process by Adjusting the Hot Metal Chemical Composition

The COREX process, which has many advantages, still has high and fluctuating sulfur levels in the hot metal. To overcome the desulfurization problems, several measures were proposed, and the adjustments of chemical compositions of hot metal were explained in the current study. Theoretical calculations and experimental results showed that increments in either of or both silicon and manganese levels were beneficial to the desulfurization from the thermodynamic viewpoint. However, high silicon content would increase the costs of the coal of COREX process and did not meet the requirements of dephosphorization and low slag content in steelmaking. Besides, superfluous manganese was also unnecessary as it would increase the costs of COREX. Therefore, the existing silicon content should be decreased (< 1.5 pct), and the manganese content should be increased in a suitable range (from 0.6 to 0.8 pct) for COREX-3000 in China.

01 COAL, LIGNITE, AND PEAT↗

Experimental Study on Charging Process in the COREX Melter Gasifier

Burden distribution plays an important role in achieving high stability and energy efficiency in the COREX melter gasifier. In this work, a 1/7.5 scale experimental apparatus is established to investigate the burden distribution under the independent and mixed charging conditions. The effects of GIMBAL distributor angle, rotational speed, DRI-flap angle, and charging pattern on these charging conditions are investigated. The results show that the non-uniform distribution of pellet in circumferential direction is intrinsic to the discharge system due to the shape of the DRI flap. The charging pattern has a significant impact on the ore-to-coal volume ratio and bed voidage. The ore-to-coal volume ratio reaches the peak at 550 to 650 mm, indicating that the reduction burden near the wall is heavier than that in the center. The voidage in the middle region is smaller than that of the center and near-wall region. The results also reveal the size segregation along the radial direction of the burden pile. The smaller particles tend to accumulate in the center while the larger ones segregate more near the wall. The findings obtained from experiments should be helpful for the efficient operation of the COREX melter gasifier.

01 COAL, LIGNITE, AND PEAT↗

Influence of Structure and Mineral Association of Tuyere-Level Coke on Gasification Process

The gasification properties of feed coke and tuyere coke were investigated by non-isothermal thermogravimetric method under CO{sub 2} atmosphere. The physical and chemical structure features were also systematically tested, as well as the mineral composition. The pore characteristics, graphitization degree of carbon matrix, and ash content were the main factors determining the reactivity of coke. Higher L{sub c} decreases the reactivity of tuyere coke in low temperature, while larger porosity increases the reactivity in high temperature, forming an intersection with the gasification process of the feed coke. The high content of Fe{sub 2}O{sub 3} in 25 to 20 mm tuyere coke made a rapid gasification reaction. The SiC produced in the tuyere area increased the porosity of coke especially the 5 to 1 mm coke at the edge of BF, which promoted the gasification process of coke in the area.

01 COAL, LIGNITE, AND PEAT↗

Structure and Reactivity of Low-Rank Coal Chars Prepared from Fluidized Bed and Moving Bed Pyrolyzers and the Potential for Using Them in Pulverized Coal Injection (PCI)

Utilizing pyrolysis chars as the injection fuel in a blast furnace can reduce the dependence on high-quality pulverized coal injection (PCI) coal. In this study, the physical properties and reaction characteristics of chars prepared from two different industrial-scale pyrolyzers (fluidized bed and moving bed) are investigated. The results reveal remarkable component segregation in the char particles with different particle sizes. The properties of large-size char particles are found to better satisfy the PCI fuel requirement in a blast furnace. Compared with PCI coal, the char particles exhibit a rough surface, well-developed pore structure, and less-ordered chemical structure of carbon. Results from isothermal combustion, isothermal gasification, and drop tube furnace experiments show that both types of chars exhibit a better reactivity than PCI coal. The excellent reactivity of chars is closely related to its high Brunauer–Emmett–Teller surface area and relatively poor chemical ordering during conversion. Based on these characteristics, both fluidized bed char (FBC) and moving bed char (MBC) have a great potential to be used as PCI fuels. The application method of chars for PCI in a blast furnace is proposed finally.

01 COAL, LIGNITE, AND PEAT↗

Improving mine safety technology and training in the U.S. recommendations of the Mine Safety Technology and Training Commission

The key issues studied focused on underground coal mining and included (1) prevention of explosions in sealed areas, (2) better emergency preparedness and response, (3) improvement of miners' ability to escape, (4) better protection of miners before and after a fire or explosion, (5) improved provision of oxygen, and (6) development and implementation of more robust post-incident communication. The U.S. Congress passed the Mine Improvement and New Emergency Response Act of 2006, which mandated new laws to address the issues. Concurrent with investigations and congressional deliberations, the National Mining Association formed the independent Mine Safety Technology and Training Commission to study the state-of-the-art relative to technology and training that could address the vulnerabilities exposed by the mine disasters. As discussed, the report outlined persistent vulnerabilities linked with significant hazards in underground coal mines, and made recommendations to provide a path for addressing them. Overall the commission report made 75 recommendations in the areas of risk-based design and management, communications technology, emergency response and mine rescue procedures, training for preparedness, and escape and protection strategies. In its deliberations, the commission importantly noted that mine safety in the U.S. needs to follow a new paradigm for ensuring mine safety and developing a culture of prevention that supports safe production at the business core. In the commission's viewpoint, the bottom line in protecting coal miners is not only adopting a culture of prevention but also systematically pursuing mitigation of significant risks. 4 refs., 2 figs.

01 COAL, LIGNITE, AND PEAT↗

Inorganic carbon dynamics and CO 2 flux associated with coal-mine drainage sites in Blythedale PA and Lambert WV, USA

Drainage from coal mines, where carbonate dissolution is driven by sulfuric acid, can result in a net transfer of geologically-bound carbon to the atmosphere. The flux and downstream evolution of dissolved inorganic carbon (DIC) is presented for two coal mine sites that discharge high concentrations of DIC (3.7–4.5 mM C) producing a total flux of DIC from the mine from 13 to 249 kg-C/year (18–364 metric tons of CO 2 /year). More than 65 % of the total DIC is lost via CO 2 evasion with the remaining DIC is exported downstream as dissolved species. The fate of the DIC depends upon the pH of the water which is controlled by evasion of CO 2 , the concentration of pre-existing alkalinity, carbonate precipitation and dissolution, and metal hydrolysis reactions. The CO 2 concentrations and fluxes from the study sites are comparable to those estimated from literature data for other coal mine sites in the Appalachian region. The total flux estimated from a dataset of 140 coal mines was comparable in magnitude to the CO 2 emissions from a small coal-fired power plant. The extent of CO 2 degassing from mine waters is poorly constrained because (1) flux estimates can be biased low when acid waters are excluded in alkalinity-based estimates; (2) flux estimates can be biased high if non-carbonate alkalinity is present in the mine waters; and (3) mine waters react rapidly following discharge hampering the measurement process. Lastly, the study sites presented illustrate the impact of coal mining as an anthropogenic influence on carbon cycling; however, more data are necessary to fully estimate the importance of this impact on regional scales

01 COAL, LIGNITE, AND PEAT↗

Calibrated dilatometer exercise to probe thermoplastic properties of coal in pressurized CO 2

This research was aimed at testing a hypothesis, that at elevated CO 2 pressure coal can soften at temperatures well below those obtained in the presence of other gases. That could have serious negative implications for injection of CO 2 into deep coal seams. Here, we have examined the experimental design issues and procedures used in the previously published studies, and experimentally investigated the physical behavior of a similar coal in the presence of CO 2 as a function of pressure and temperature, using the same high-pressure micro-dilatometer refurbished and carefully calibrated for this purpose. No notable reduction in coal softening temperature was observed in this study.

01 COAL, LIGNITE, AND PEAT↗