Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LHC PERFORMANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Performance of Nb3Sn Quadrupole Under High Stress

Future upgrades of the Large Hadron Collider (LHC) will require large aperture and high gradient quadrupoles. Nb{sub 3}Sn is the most viable option for this application but is also known for its strain sensitivity. In high field magnets, with magnetic fields above 12 T, the Lorentz forces will generate mechanical stresses that may exceed 200 MPa in the windings. The existing measurements of critical current versus strain of Nb{sub 3}Sn strands or cables are not easily applicable to magnets. In order to investigate the impact of high mechanical stress on the quench performance, a series of tests was carried out within a LBNL/CERN collaboration using the magnet TQS03 (a LHC Accelerator Research Program (LARP) 1-meter long, 90-mm aperture Nb{sub 3}Sn quadrupole). The magnet was tested four times at CERN under various pre-stress conditions. The average mechanical compressive azimuthal pre-stress on the coil at 4.2 K ranged from 120 MPa to 200 MPa. This paper reports on the magnet performance during the four tests focusing on the relation between pre-stress conditions and the training plateau.

43 PARTICLE ACCELERATORS↗

Utilizing Distributed Heterogeneous Computing with PanDA in ATLAS

In recent years, advanced and complex analysis workflows have gained increasing importance in the ATLAS experiment at CERN, one of the large scientific experiments at LHC. Support for such workflows has allowed users to exploit remote computing resources and service providers distributed worldwide, overcoming limitations on local resources and services. The spectrum of computing options keeps increasing across the Worldwide LHC Computing Grid (WLCG), volunteer computing, high-performance computing, commercial clouds, and emerging service levels like Platform-as-a-Service (PaaS), Container-as-a-Service (CaaS) and Function-as-a-Service (FaaS), each one providing new advantages and constraints. Users can significantly benefit from these providers, but at the same time, it is cumbersome to deal with multiple providers, even in a single analysis workflow with fine-grained requirements coming from their applications’ nature and characteristics. In this paper, we will first highlight issues in geographically-distributed heterogeneous computing, such as the insulation of users from the complexities of dealing with remote providers, smart workload routing, complex resource provisioning, seamless execution of advanced workflows, workflow description, pseudointeractive analysis, and integration of PaaS, CaaS, and FaaS providers. We will also outline solutions developed in ATLAS with the Production and Distributed Analysis (PanDA) system and future challenges for LHC Run4.

97 MATHEMATICS AND COMPUTING↗

US Contribution to the High Luminosity LHC Upgrade: Focusing Quadrupoles and Crab Cavities

In the early 2000's, the US High Energy Physics community contributing to the Large Hadron Collider (LHC) launched the LHC Accelerator R&D Program (LARP), a long-vision focused R&D program, intended contribute to a quick LHC commissioning and to bring the Nb3Sn and other technologies to a maturity level that would allow applications in HEP machines [1,2]. Around 2015, the technologies developed by LARP, CERN and other institutions were mature enough to allow the spin-off of a major upgrade project to the LHC complex, the High Luminosity LHC (HL-LHC) [3]. This paper will focus on the US contribution to HL-LHC, namely the large-aperture low-β focusing Nb3Sn quadrupoles and the Radio Frequency Dipole (RFD) Crab Cavities, located in close proximity to the ATLAS and CMS experiments. This contribution, called the HL-LHC Accelerator Upgrade Project (HL-LHC AUP), focuses on production of these quadrupoles and cavities by sharing the work among a consortium of US Laboratories (FNAL, LBNL, BNL and SLAC) and Universities and in close connection with the CERN-led HL-LHC Collaboration. The collaboration achieved commonality of specifications and uniformity of performance. Final development of design, construction and first results from the prototypes are described to indicate the status of these critical components for HL-LHC.

43 PARTICLE ACCELERATORS↗

Mechanics and Cooling of the CMS Phase-II Tracker Barrel

The CMS upgrade for the High-Luminosity LHC (HL-LHC) era will allow for an incredibly high rate of data collection, to be used in the next generation of precision measurements and searches for beyond the standard model physics. A key element of this upgrade is the full replacement of the silicon strip tracker to enable level-1 triggering on track level primitives, produced by pixel-strip (PS) and strip-strip (2S) modules, tiled together to form the new detector. Mechanically supporting and cooling these modules is not trivial, as material budget in the tracker volume is highly constrained, and as the modules accrue radiation damage they risk becoming entirely non-functional if the silicon sensors are not sufficiently cooled. To address this, each region of the tracker has a bespoke solution for housing and cooling their modules, mostly depending on carbon-fiber and carbon-foam structures, with dual phase CO2 cooling. For the most central part of the tracker, the Flat Barrel with PS modules (Flat TBPS) covers the pseudorapidity range out to $|\eta|=0.4$, and the mechanical structures are manufactured, assembled, and tested entirely by Fermilab and UC Davis. This presentation will describe the intense design and testing requirements for these components, and how they will ensure strong performance of the tracker through the HL-LHC era.

Cosby, Christopher [Fermilab]↗

Pseudoscalar boson and standard model-like Higgs boson productions at the LHC in the simplest little Higgs model

In the framework of the simplest little Higgs model, we perform a comprehensive study for the pair productions of the pseudoscalar boson {eta} and standard model-like Higgs boson h at LHC, namely gg(bb){yields}{eta}{eta}, gg(qq){yields}{eta}h, and gg(bb){yields}hh. These production processes provide a way to probe the couplings between Higgs bosons. We find that the cross section of gg{yields}{eta}{eta} always dominates over that of bb{yields}{eta}{eta}. When the Higgs boson h which mediates these two processes is on-shell, their cross sections can reach several thousand fb and several hundred fb, respectively. When the intermediate state h is off-shell, those two cross sections are reduced by 2 orders of magnitude, respectively. The cross sections of gg{yields}{eta}h and qq{yields}{eta}h are about in the same order of magnitude, which can reach O(10{sup 2} fb) for a light {eta} boson. Besides, compared with the standard model prediction, the cross section of a pair of standard model-like Higgs bosons production at LHC can be enhanced sizably. Finally, we briefly discuss the observable signatures of {eta}{eta}, {eta}h, and hh at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First results from the 2010 pp Run and performance of the CMS Experiment

In 2010, the Compact Muon Solenoid (CMS) experiment at LHC recorded over 45 pb^-1 of pp collision data at sqrt(s)=7 TeV. The large collected datasets are of very high quality and have been used to commission and calibrate the CMS detector, with the achieved performance close to the TDR specifications. CMS has reestablished all the major Standard Model processes in the 2010 Run and is entering new territory in searches for New Physics, with sensitivity already exceeding that at LEP and TeVatron.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mechanical Performance of the First Two Prototype 4.5 m Long Nb$_3$Sn Low-$β$ Quadrupole Magnets for the Hi-Lumi LHC Upgrade

The U.S. High-Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP) team is collaborating with CERN in the design and fabrication of the first 4.5 m long MQXFA magnets, a 150 mm aperture high-field Nb$_3$Sn quadrupole magnet that uses the aluminum shell-based bladder-and-key technology. The first two prototype magnets, MQXFAP1 and MQXFAP2, were assem-bled and tested while the first pre-series structure (MQXFA03) was in fabrication. This paper summarizes the mechanical perfor-mance of these prototype structures based on the comparison of measured strain gauge data with finite element model analyses from all load steps to powering. The MQXFAP1 magnet almost reached ultimate current before a short to ground was detected and the test was stopped. The MQXFAP2 magnet experienced a low training performance due to a fractured aluminum shell. MQXFAP1b was rebuilt with a new replacement coil, but an old coil limited the magnet from achieving the ultimate current. The mitigations and analyses of these prototype magnets are discussed in the context of the transition to pre-series production.

43 PARTICLE ACCELERATORS↗

The upgrade of endcap CMS muon system

The configuration and composition of the CMS muon system are presented. The paper is focused on cathode strip chambers (CSC) used as the endcap muon system detectors. The goals and objectives of the endcap muon system upgrade are formulated. The main results of works accomplished for the ME1/1 CSCs upgrade and the new ME4/2 muon station construction during the LHC Long Shutdown-1 (2013–2014) are presented. The improved performances of the endcap muon system are shown using experimental data obtained after the upgrade (Run2 data).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hadron Structure Studies with a Fixed-Target Experiment at the LHC - AFTER@LHC

I will illustrate some of the opportunities for hadron structure studies at a future multi-purpose fixed-target experiment at the LHC. The proton beams at the LHC allow for the most energetic fixed-target experiments ever performed, opening new kinematic windows on hadron and nuclear physics which integrate the knowledge available from collider experiments (in particular RHIC and EIC).?? I will discuss how AFTER@LHC will shed light on the proton-spin puzzle by investigating Transverse-Momentum Dependent parton distribution functions (TMDs). Unpolarized proton-proton collisions allow to access unpolarized quark and gluon TMDs, the Boer-Mulders quark TMD and the distribution of linearly polarized gluons in unpolarized protons. Looking at polarized targets, single-transverse-spin asymmetries (STSAs) for processes such as Drell-Yan lepton-pair and quarkonium production will allow measurements of polarized TMDs for quarks and gluons, such as the Sivers functions. Moreover, I will show how, thanks to the boost of the fixed target mode, the acceptance of detectors like LHCb and ALICE in the fixed-target mode allows to analyze processes which are sensitive to the intrinsic charm content of the proton. In particular, I will address some aspects of D meson, charm + photon as well as J/psi-pair production.

Signori, Andrea↗

LEvEL: Low-Energy Neutrino Experiment at the LHC

We propose the operation of LEvEL, the Low-Energy Neutrino Experiment at the LHC, a neutrino detector near the Large Hadron Collider Beam Dump. Such a detector is capable of exploring an intense, low-energy neutrino flux and can measure neutrino cross sections that have previously never been observed. These cross sections can inform other future neutrino experiments, such as those aiming to observe neutrinos from supernovae, allowing such measurements to accomplish their fundamental physics goals. We perform detailed simulations to determine neutrino production at the LHC beam dump, as well as neutron and muon backgrounds. Measurements at a few to ten percent precision of neutrino-argon charged current and neutrino-nucleus coherent scattering cross sections are attainable with 100 ton-year and 1 ton-year exposures at LEvEL, respectively, concurrent with the operation of the High Luminosity LHC. We also estimate signal and backgrounds for an experiment exploiting the forward direction of the LHC beam dump, which could measure neutrinos above 100 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of the rare decays of B s 0 and B 0 mesons into muon pairs using data collected during 2015 and 2016 with the ATLAS detector

A study of the decays B s 0 → μ + μ – and B 0 → μ + μ – has been performed using 26.3 fb –1 of 13 TeV LHC proton-proton collision data collected with the ATLAS detector in 2015 and 2016. Since the detector resolution in μ + μ – invariant mass is comparable to the B s 0 -B 0 mass difference, a single fit determines the signal yields for both decay modes. This results in a measurement of the branching fraction B(B s 0 → μ + μ – ) = (3.2 +1.1 –1.0 ) × 10 –9 and an upper limit B(B 0 → μ + μ – ) < 4.3×10 –10 at 95% confidence level. The result is combined with the Run 1 ATLAS result, yielding B(B s 0 → μ + μ – ) = (2.8 +0.8 –0.7 ) × 10 –9 and B(B 0 → μ + μ – ) < 2.1 × 10 –10 at 95% confidence level. The combined result is consistent with the Standard Model prediction within 2.4 standard deviations in the B(B 0 → μ + μ – ) – B(B 0 s → μ + μ – ) plane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a right-handed W boson and a heavy neutrino in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A search is presented for a right-handed W boson (W R ) and a heavy neutrino (N), in a final state consisting of two same-flavor leptons (ee or μμ) and two quarks. The search is performed with the CMS experiment at the CERN LHC using a data sample of proton-proton collisions at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 138 fb -1 . The search covers two regions of phase space, one where the decay products of the heavy neutrino are merged into a single large-area jet, and one where the decay products are well separated. The expected signal is characterized by an excess in the invariant mass distribution of the final-state objects. No significant excess over the standard model background expectations is observed. The observations are interpreted as upper limits on the product of W R production cross sections and branching fractions assuming that couplings are identical to those of the standard model W boson. For N masses m N equal to half the W R mass m W R (m N = 0.2 TeV), m W R is excluded at 95% confidence level up to 4.7 (4.8) and 5.0 (5.4) TeV for the electron and muon channels, respectively. This analysis provides the most stringent limits on the W R mass to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Resonances in the Dilepton Mass Distribution in $pp$ Collisions at $\sqrt{s} = 7$ TeV

A search for narrow resonances at high mass in the dimuon and dielectron channels has been performed by the CMS experiment at the CERN LHC, using pp collision data recorded at sqrt(s)=7 TeV. The event samples correspond to integrated luminosities of 40 inverse picobarns in the dimuon channel and 35 inverse picobarns in the dielectron channel. Heavy dilepton resonances are predicted in theoretical models with extra gauge bosons (Z') or as Kaluza-Klein graviton excitations(G_KK) in the Randall-Sundrum model. Upper limits on the inclusive cross section of Z'(G_KK) decaying to oppositely charged leptons relative to Z decaying to oppositely charged leptons are presented. These limits exclude at 95% confidence level a Z' with standard-model-like couplings below 1140 GeV, the superstring-inspired Z_psi below 887 GeV, and, for values of the coupling parameter k/M_Pl of 0.05 (0.1), Kaluza-Klein gravitons below 855 (1079) GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for single production of vector-like quarks decaying to a Z boson and a top or a bottom quark in proton-proton collisions at $ \sqrt{s}=13 $ TeV

A search for single production of vector-like quarks, T and B, decaying into a Z boson and a top or a bottom quark, respectively, is presented. The search is performed using data collected by the CMS experiment at the LHC in proton-proton collisions at $ \sqrt{s}=13 $ TeV, corresponding to an integrated luminosity of 2.3fb$^{−1}$. An exotic T quark production mode through the decay of a heavy Z′ resonance is also considered. The search is performed in events with a Z boson decaying leptonically, accompanied by a bottom or a top quark decaying hadronically. No excess of events is observed over the standard model background expectation. Products of production cross section and branching fraction for T and B quarks from 1.26 and 0.13 pb are excluded at 95% confidence level for the range of resonance mass considered, which is between 0.7 and 1.7 TeV. Limits on the product of the Z′ boson production cross section and branching fraction, with the Z′ boson decaying to the Tt final state, are set between 0.31 and 0.13 pb, for Z′ boson masses in the range from 1.5 to 2.5 TeV. This is the first search at 13 TeV for single production of vector-like quarks in events with a Z boson decaying leptonically accompanied by boosted jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the low-mass Drell-Yan differential cross section at √s = 7 TeV using the ATLAS detector

The differential cross section for the process Z/γ → ℓℓ (ℓ = e,μ) as a function of dilepton invariant mass is measured in pp collisions at √s = 7 TeV at the LHC using the ATLAS detector. The measurement is performed in the e and μ channels for invariant masses between 26 GeV and 66 GeV using an integrated luminosity of 1.6 fb -1 collected in 2011 and these measurements are combined. The analysis is extended to invariant masses as low as 12 GeV in the muon channel using 35 pb -1 of data collected in 2010. The cross sections are determined within fiducial acceptance regions and corrections to extrapolate the measurements to the full kinematic range are provided. Next-to-next-to-leading-order QCD predictions provide a significantly better description of the results than next-to-leading order QCD calculations, unless the latter are matched to a parton shower calculation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for supersymmetry in proton-proton collisions at 13 TeV in final states with jets and missing transverse momentum

Results are reported from a search for supersymmetric particles in the final state with multiple jets and large missing transverse momentum. The search uses a sample of proton-proton collisions at $ \sqrt{s} $ = 13 TeV collected with the CMS detector in 2016–2018, corresponding to an integrated luminosity of 137 fb$^{–1}$, representing essentially the full LHC Run 2 data sample. The analysis is performed in a four-dimensional search region defined in terms of the number of jets, the number of tagged bottom quark jets, the scalar sum of jet transverse momenta, and the magnitude of the vector sum of jet transverse momenta. No significant excess in the event yield is observed relative to the expected background contributions from standard model processes. Limits on the pair production of gluinos and squarks are obtained in the framework of simplified models for supersymmetric particle production and decay processes. Assuming the lightest supersymmetric particle to be a neutralino, lower limits on the gluino mass as large as 2000 to 2310 GeV are obtained at 95% confidence level, while lower limits on the squark mass as large as 1190 to 1630 GeV are obtained, depending on the production scenario.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

FPGA-Accelerated Machine Learning Inference as a Service for Particle Physics Computing

Large-scale particle physics experiments face challenging demands for high-throughput computing resources both now and in the future. New heterogeneous computing paradigms on dedicated hardware with increased parallelization, such as Field Programmable Gate Arrays (FPGAs), offer exciting solutions with large potential gains. The growing applications of machine learning algorithms in particle physics for simulation, reconstruction, and analysis are naturally deployed on such platforms. We demonstrate that the acceleration of machine learning inference as a web service represents a heterogeneous computing solution for particle physics experiments that potentially requires minimal modification to the current computing model. As examples, we retrain the ResNet-50 convolutional neural network to demonstrate state-of-the-art performance for top quark jet tagging at the LHC and apply a ResNet-50 model with transfer learning for neutrino event classification. Using Project Brainwave by Microsoft to accelerate the ResNet-50 image classification model, we achieve average inference times of 60 (10) ms with our experimental physics software framework using Brainwave as a cloud (edge or on-premises) service, representing an improvement by a factor of approximately 30 (175) in model inference latency over traditional CPU inference in current experimental hardware. A single FPGA service accessed by many CPUs achieves a throughput of 600–700 inferences per second using an image batch of one, comparable to large batch-size GPU throughput and significantly better than small batch-size GPU throughput. Deployed as an edge or cloud service for the particle physics computing model, coprocessor accelerators can have a higher duty cycle and are potentially much more cost-effective.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Transverse Momentum Spectra of Charged Particles in Proton-Proton Collisions at s = 900 GeV with ALICE at the LHC

The inclusive charged particle transverse momentum distribution is measured in proton-proton collisions at {radical}{ovr s} = 900 GeV at the LHC using the ALICE detector. The measurement is performed in the central pseudorapidity region (|{eta}|<0.8) over the transverse momentum range 0.15<p{sub T}<10 GeV/c. The correlation between transverse momentum and particle multiplicity is also studied. Results are presented for inelastic (INEL) and non-single-diffractive (NSD) events. The average transverse momentum for |{eta}|<0.8 is {l_angle}p{sub T}{r_angle}{sub INEL} = 0.483{+-}0.001 (stat.){+-}0.007 (syst.) GeV/c and {l_angle}p{sub T}{r_angle}{sub NSD} = 0.489{+-}0.001 (stat.){+-}0.007 (syst.) GeV/c, respectively. The data exhibit a slightly larger {l_angle}p{sub T}{r_angle} than measurements in wider pseudorapidity intervals. The results compared to simulations with the Monte Carlo event generators PYTHIA and PHOJET.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗