Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LASER OUTPUT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Coherent communication link using diode-pumped lasers

Work toward developing a diffraction limited, single frequency, modulated transmitter suitable for coherent optical communication or direct detection communication is discussed. Diode pumped, monolithic Nd:YAG nonplanar ring oscillators were used as the carrier beam. An external modulation technique which can handle high optical powers, has moderate modulation voltage, and which can reach modulation rates of 1 GHz was invented. Semiconductor laser pumped solid-state lasers which have high output power (0.5 Watt) and which oscillate at a single frequency, in a diffraction limited beam, at the wavelength of 1.06 microns were built. A technique for phase modulating the laser output by 180 degrees with a 40-volt peak to peak driving voltage is demonstrated. This technique can be adapted for amplitude modulation of 100 percent with the same voltage. This technique makes use of a resonant bulk modulator, so it does not have the power handling limitations of guided wave modulators.

Kane, Thomas J.↗

Method and apparatus for efficient operation of optically pumped laser

An optically pumped single mode laser, e.g., Nd:YAG crystal (20) with planoconcave mirrors is increased in efficiency by an order of magnitude to about 8% by optics (25, 27) for focusing the high power multimode output of laser diode arrays (21, 22) into the mode volume (20') of the laser medium (20). A plurality of these optically pumped single mode lasers (1-4) may be cascaded in a ring with dichroic mirrors (M.sub.1 -M.sub.4) at the corners for coupling in the laser diode arrays, each having its own means for spatially tailoring its beam to concentrate pump distribution inside the lasing mode volume of the medium. An InGaAlAs pump diode (30) with its wavelength the same as the lasing medium makes the ring unidirectional.

Sipes, Jr., Donald L.↗

Method and apparatus for efficient operation of an optically pumped laser

An optically pumped single mode laser, e.g. Nd:YAG crystal (20) with planoconcave mirrors is increased in efficiency by an order of magnitude to about 8% by optics (25, 27) for focusing the high power multimode output of laser diode arrays (21, 22) into the mode volume (20') of the laser medium (20). A plurality of these optically pumped single mode lasers (1-4) may be cascaded in a ring with dichroci mirrors (M.sub.1 -M.sub.4) at the corners for coupling in the laser diode arrays, each having its own means for spatially tailoring its beam to concentrate pump distribution inside the lasing mode volume of the medium. An InGaAlAs pump diode (30) with its wavelength of the same as a lasing medium makes the ring unidirectional. The questions raised in reexamination request No. 90/002,473, filed Oct. 10, 1991, have been considered and the results thereof are reflected in this reissue patent which constitutes the reexamination certificate required by 35 U.S.C. 307 as provided in 37 CFR 1,570(e).

Sipes, Jr., Donald L.↗

Holmium-doped fibre amplifier operating at 2.1 μm

A small-signal holmium-doped fibre amplifier is demonstrated. The seed source is a cw holmium-doped fibre laser whose output power is modulated by an electro-optical modulator. The maximum gain reached (wavelength, 2.1 μm; power, 0.25 mW; pulse duration, 100 ns; pulse repetition rate, 1 μs) is 28.5 dB. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A high-pressure carbon dioxide gasdynamic laser

A carbon dioxide gasdynamic laser was operated over a range of reservoir pressure and temperature, test-gas mixture, and nozzle geometry. A significant result is the dominant influence of nozzle geometry on laser power at high pressure. High reservoir pressure can be effectively utilized to increase laser power if nozzle geometry is chosen to efficiently freeze the test gas. Maximum power density increased from 3.3 W/cu cm of optical cavity volume for an inefficient nozzle to 83.4 W/cu cm at 115 atm for a more efficient nozzle. Variation in the composition of the test gas also caused large changes in laser power output. Most notable is the influence of the catalyst (helium or water vapor) that was used to depopulate the lower vibrational state of the carbon dioxide. Water caused an extreme deterioration of laser power at high pressure (100 atm), whereas, at low pressure the laser for the two catalysts approached similar values. It appears that at high pressure the depopulation of the upper laser level of the carbon dioxide by the water predominates over the lower state depopulation, thus destroying the inversion.

Kuehn, D. M.↗

Longitudinal discharge pumped low-pressure XeCl laser

We have studied output parameters of a XeCl and a N{sub 2} laser pumped by a longitudinal discharge with automatic spark UV preionisation. The output parameters of a low-pressure (30 Torr) XeCl laser operating with Ar, Ne and He as buffer gases or with no buffer gas have been optimised for the first time. The laser generated 5-ns FWHM pulses with an average power of 0.5 mW and output energy of 0.15 mJ. Under longitudinal discharge pumping, an output energy per unit volume of 1.8 J L{sup -1} atm{sup -1} was reached using helium as a buffer gas. With argon-containing and buffer-free mixtures, it was 1.5 J L{sup -1} atm{sup -1}. The N{sub 2} laser generated 2.5-ns FWHM pulses with an average power of 0.35 mW and output energy of 0.05 mJ. (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

Control of an average output power of a CuBr laser

We have studied the pump parameters of a CuBr laser (pulse repetition rate of 14 kHz) with an independent heating of the active medium and an additional excitation source, providing an operational control of the radiation parameters in a given time interval. We have fabricated an experimental setup that makes it possible to change the average output power by applying a control pulse which is ahead of the main pulse by 0.12 - 20 {mu}s. It is shown that to ensure the effective control of the laser power, the voltage amplitude of the additional excitation pulse should be within 12 % - 28 % of the main pulse amplitude. In this case, the proposed control regime allows a 2.5-fold decrease in the time delay between the control and main excitation pulses due to a higher energy of the additional pulse compared to self-heating regime of the laser operation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model-independent tuning for maximizing free electron laser pulse energy

The output power of a free electron laser (FEL) has extremely high variance even when all FEL parameter set points are held constant because of the stochastic nature of the self-amplified spontaneous emission (SASE) FEL process, drift of thousands of coupled parameters, such as thermal drifts, and uncertainty and time variation of the electron distribution coming off of the photo cathode and entering the accelerator. In this work, we demonstrate the application of automatic, model-independent feedback for the maximization of average pulse energy of the light produced by free electron lasers. We present experimental results from both the European x-ray free electron laser at DESY and from the Linac Coherent Light Source at SLAC. We demonstrate application of the technique on rf systems for automatically adjusting the longitudinal phase space of the beam, for adjusting the phase shifter gaps between the undulators, and for adjusting steering magnets between undulator sections to maximize the FEL output power. We show that we can tune up to 105 components simultaneously based only on noisy average bunch energy measurements.

47 OTHER INSTRUMENTATION↗

Optically pumped rare-gas lasers

The modern state of the research of a new promising optically pumped laser system with an active medium formed by metastable rare-gas atoms is briefly reviewed. The kinetics of these media is similar to that of laser media based on alkali metal vapour; however, the gas medium is inert. Metastable atoms can be produced in an electric discharge. As in alkali lasers, the specific laser power output under atmospheric pressure can be several hundreds of watts per 1 cm{sup 3}. The lasing wavelengths lie in the near-IR range and fall in the transparency window of the terrestrial atmosphere. This new concept makes it possible to develop a closed-cycle cw laser with megawatt power levels and high beam quality. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a monolithic GaAs integrated optical transmitter

The paper discusses a program designed for the development of a GaAs IOC transmitter consisting of a monolithic surface laser whose output is coupled into patterned channel waveguides. Modulation and switching of the radiation occur in the waveguide circuit and are controlled separately. These structures are to be fabricated monolithically on a single semiconductor chip with each device amenable to integrated low-cost manufacture. The waveguide outputs of the IOC transmitter will be coupled to single mode optical fibers which form a transmission cable. The properties of the semiconductors (Ga,Al)As and (Ga,In)As permit performance of each of the basic functions included in the device considered. The concept of monolithic nondiscrete GaAs diode lasers is examined along with optical stripline channel waveguides and electro-optic channel waveguide modulators and switches.

Blum, F. A.↗

Model of a laser gyroscope with frequency dithering

The model of a laser gyroscope (LG) with frequency dithering is described by a system of recurrent equations for the electric fields of counterpropagating waves. The phenomenon of frequency locking is taken into account in the form of the wave coupling through backward scattering; the frequency bias factor is the controlled phase nonreciprocity. The character of the output signal is considered, which corresponds to two types of frequency dithering, namely, sinusoidal and in the form of meander that are produced by various methods, including intracavity phase modulation. Results of calculation of a frequency characteristic of the LG are presented as functions of frequency dithering, rotational velocity and LG parameters. It is shown that the method of processing an output signal by measuring the time interval between intensity oscillations has an advantage due to the absence of so-called dynamic lock-in zones in the output characteristic. (laser gyroscope)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Capture of charge carriers and output power of a quantum well laser

The effect of noninstantaneous carrier capture by a nanoscale active region on the power characteristics of a semiconductor laser is studied. A laser structure based on a single quantum well is considered. It is shown that delayed carrier capture by the quantum well results in a decrease in the internal differential quantum efficiency and sublinearity of the light-current characteristic of the laser. The main parameter of the developed theoretical model is the velocity of carrier capture from the bulk (waveguide) region to the two-dimensional region (quantum well). The effect of the capture velocity on the dependence of the following laser characteristics on the pump current density is studied: the output optical power, internal quantum efficiency of stimulated emission, current of stimulated recombination in the quantum well, current of spontaneous recombination in the optical confinement layer, and carrier concentration in the optical confinement layer. A decrease in the carrier capture velocity results in a larger sublinearity of the light-current characteristic, which results from an increase in the injection current fraction expended to parasitic spontaneous recombination in the optical confinement layer and, hence, a decrease in the injection current fraction expended to stimulated recombination in the quantum well. A comparison of calculated and experimental light-current characteristics for a structure considered as an example shows that good agreement between them (up to a very high injection current density of 45 kA/cm{sup 2}) is attained at a capture velocity of 2 Multiplication-Sign 10{sup 6} cm/s. The results of this study can be used to optimize quantum well lasers for generating high optical powers.

36 MATERIALS SCIENCE↗

Calculation of output characteristics of semiconductor quantum-well lasers with account for both electrons and holes

Using an extended theoretical model, which includes the rate equations for both electrons and holes, we have studied the output characteristics of semiconductor quantum-well lasers. We have found non-trivial dependences of electron and hole concentrations in the waveguide region of the laser on the capture velocities of both types of carriers from the waveguide region into the quantum well. We have obtained the dependences of the internal differential quantum efficiency and optical output power of the laser on the capture velocities of electrons and holes. An increase in the capture velocities has been shown to result in suppression of parasitic recombination in the waveguide region and therefore in a substantial increase in the quantum efficiency and output power. (lasers)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

OH radical measurements by optical absorption spectroscopy

The long path absorption spectroscopy (LPA) measurement of OH utilizes the strong UV absorption spectrum of the molecule with well resolved rotational lines around 308 nm. The light source consists of an Ar ion laser pumped CW dye laser, the output of which is frequency doubled to emit a spectrally smooth light profile of 0.1 nm FWHM at 308 nm. This is considerably broader than the sharp (0.0018 nm wide) absorption features of OH and also wider than the total spectral region (0.06 nm) scanned around the OH lines. For field measurements a Cassegrain-type telescope expands the small diameter of the original laser beam by a factor of 50 to about a 0.25-m diameter in order to reduce the divergence of the beam as well as its mean photon flux density, thus reducing the maximum self-generated OH concentration to 40,000 cu. cm. The light is passed into the open atmosphere and reflected at about 5 km distance resulting in a 10-km light path length. A telescope focuses the returning light onto the entrance slit of a monochromator the single exit slit of which is replaced by a mechanical scanning device operating at a scan repetition rate of 6.6 KHz. For a typical measurement (1h duration) some 20,000,000 scans are averaged, rendering the contribution of atmospheric turbulence to the spectral noise negligible.

Platt, U.↗

Efficiency of using nitrogen trifluoride as an oxidiser in a supersonic continuous-wave chemical HF laser

We report the results of an experimental study of possible ways to increase the efficiency of using NF{sub 3} nitrogen trifluoride as an oxidiser in an atomic fluorine generator of a supersonic continuous-wave chemical HF laser with a flat nozzle block corresponding to the nozzle – nozzle reagent mixing scheme. As such ways, we consider increasing the residence time of reagents in the combustion chamber and rising temperature in the chemical reaction zone. Comparison of specific energy characteristics of an HF laser operating with the use of the studied (NF{sub 3}) and ‘basic’ (F{sub 2}) oxidisers shows that the replacement of molecular fluorine with nitrogen trifluoride during the burning with deuterium in the combustion chamber of an atomic fluorine generator with allowance for the proposed measures leads to a reduction in the specific laser energy output by no more than 23 % – 24 % at high burning completeness. (paper)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The visible laser absorption property of chromium-doped polyvinyl alcohol films: synthesis, optical and dielectric properties

New films for visible laser filter were fabricated from poly(vinyl alcohol), PVA, and various levels of chrome(III) chloride, CrCl{sub 3}, by a known simple process named casting. The structure order degree, complex interaction, as well as optical filtering characteristic of the PVA + xCrCl{sub 3} (x = 0.037, 0.37, 3.7, 18.5 and 37 wt%) samples were investigated via the diffraction of the X-ray, Fourier transform infrared spectroscopy and UV/Vis/NIR spectrum, respectively, while the behavior of optical limiting was tested by set-up laser limiting measurement. The increment of Cr{sup 3+}-doping level in the PVA gives some results as, (I) a marked increase in the degree of random structure of the samples, and (II) two clearly absorption peaks are seen around 428 nm and 608 nm with a progressive increase in the intensity and a slight shift to a higher wavelength. (III) Three distinguished energy gaps were clearly observed, as well as, (IV) the dielectric spectroscopy of the samples was decreased with increasing the Cr{sup 3+}-doping, which contributes to the strong interaction among the mixtures. Furthermore, at concentrations above 0.37 wt% of Cr{sup 3+}-doping, a notable decrease in the output detected laser power was observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New ytterbium-phosphate glass for diode-pumped lasers

A new ytterbium laser glass based on an alumoborophosphate composition is developed. It is shown that the chemical and thermal stabilities of this glass are record-high for phosphate glasses and that its spectral and luminescent characteristics compare well with popular laser glasses. A mould of laser-quality glass doped with ytterbium with a concentration of 5x10{sup 20} cm{sup -3} is synthesised. Active laser elements 5x5x2 mm in size are prepared from this glass for longitudinal diode pumping. These elements were used to fabricate a laser, whose output power in the cw regime reached 783 mW and maximum slope efficiency was 28.9%. Pulses with a duration of {approx}150 fs and a peak power of about 5 kW are obtained in the passive mode-locking regime. (active media)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CO2 laser-driven Stirling engine

A 100-W Beale free-piston Stirling engine was powered remotely by a CO2 laser for long periods of time. The engine ran on both continuous-wave and pulse laser input. The working fluid was helium doped with small quantities of sulfur hexafluoride, SF6. The CO2 radiation was absorbed by the vibrational modes of the sulfur hexafluoride, which in turn transferred the energy to the helium to drive the engine. Electrical energy was obtained from a linear alternator attached to the piston of the engine. Engine pressures, volumes, and temperatures were measured to determine engine performance. It was found that the pulse radiation mode was more efficient than the continuous-wave mode. An analysis of the engine heat consumption indicated that heat losses around the cylinder and the window used to transmit the beam into the engine accounted for nearly half the energy input. The overall efficiency, that is, electrical output to laser input, was approximately 0.75%. However, this experiment was not designed for high efficiency but only to demonstrate the concept of a laser-driven engine. Based on this experiment, the engine could be modified to achieve efficiencies of perhaps 25-30%.

Lee, G.↗