Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Indexes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Cloud drop number concentrations over the western North Atlantic Ocean: seasonal cycle, aerosol interrelationships, and other influential factors

Cloud drop number concentrations (N d ) over the western North Atlantic Ocean (WNAO) are generally highest during the winter (DJF) and lowest in summer (JJA), in contrast to aerosol proxy variables (aerosoloptical depth, aerosol index, surface aerosol mass concentrations, surface cloud condensation nuclei (CCN) concentrations) that generally peak inspring (MAM) and JJA with minima in DJF. Using aircraft, satellite remote sensing, ground-based in situ measurement data, and reanalysis data, we characterize factors explaining the divergent seasonal cycles and furthermore probe into factors influencing N d on seasonal timescales. The results can be summarized well by features most pronounced in DJF, including features associated with cold-air outbreak (CAO) conditions such as enhanced values of CAO index, planetary boundary layer height (PBLH),low-level liquid cloud fraction, and cloud-top height, in addition to winds aligned with continental outflow. Data sorted into high- and low-N d days in each season, especially in DJF, revealed that all of these conditions were enhanced on the high-N d days, including reduced sea level pressure and stronger wind speeds. Although aerosols may be more abundant in MAM and JJA, the conditions needed to activate those particles into cloud droplets are weaker than in colder months, which is demonstrated by calculations of the strongest (weakest) aerosol indirect effects in DJF (JJA) based on comparing N d to perturbations in four different aerosol proxy variables (total and sulfate aerosol optical depth, aerosol index, surface mass concentration of sulfate). We used three machine learning models and up to 14 input variables to infer about most influential factors related to N d for DJF and JJA, with the best performance obtained with gradient-boosted regression tree (GBRT) analysis. The model results indicated that cloud fraction was the most important input variable, followed by some combination (depending on season) of CAO index and surface mass concentrations of sulfate and organic carbon. Future work is recommended to further understand aspects uncovered here such as impacts of free tropospheric aerosol entrainment on clouds, degree of boundary layer coupling, wet scavenging, and giant CCN effects on aerosol–N d relationships, updraft velocity, and vertical structure of cloud properties such as adiabaticity that impact the satellite estimation of N d .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Processed Surface Imagery & Raster Imagery taken onboard TigerShark (U3) UAS

Land-surface orthomosaic imagery derived from the images collected using the Micasense Altum Imager on board the UAS TigerShark (U3) on March 11th, 2021 at an altitude of 2000 ft. The Altum takes images of the land surface across five visible bands and one long wave infrared thermal band. The photogrametry software Agisoft PhotoScan v 1.4 is used to align and stitch the images into a larger composet image using the technique of structure from motion image capture to construct a dense cloud and 3-D model of the surface, which is used to produce a digital elevation model of the terraine surveyed and orthomosaic imagery. This dataset contains the raster calculated orthomosaics of various vegetative indicies, which are used to indicate plant health and land surface characteristics, including Normalized Difference Vegetation Index (NDVI), Green Normalized Difference Vegetation Index (GNDVI), Normalized Difference Water Index (NDWI), surface temperature, and Enhanced_vegetation_index (EVI). These orthomosaics were collected west of the Starkville, MS, airport, and include natural, agricultural, and industrial land coverage. The images have a resolution of 0.2 m/pix.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

HarDWR - Harmonized Water Rights Records

For a detailed description of the database of which this record is only one part, please see the HarDWR meta-record. Here we present a new dataset of western U.S. water rights records. This dataset provides consistent unique identifiers for each spatial unit of water management across the domain, unique identifiers for each water right record, and a consistent categorization scheme that puts each water right record into one of 7 broad use categories. These data were instrumental in conducting a study of the multi-sector dynamics of intersectoral water allocation changes through water markets (Grogan et al., in review). Specifically, the data were formatted for use as input to a process-based hydrologic model, WBM, with a water rights module (Grogan et al., in review). While this specific study motivated the development of the database presented here, U.S. west water management is a rich area of study (e.g., Anderson and Woosly, 2005; Tidwell, 2014; Null and Prudencio, 2016; Carney et al, 2021) so releasing this database publicly with documentation and usage notes will enable other researchers to do further work on water management in the U.S. west. The raw downloaded data for each state is described in Lisk et al. (in review), as well as here. The dataset is a collection of objects stored within an RDate file, stateWaterRightsHarmonized.RData. Each object either describes how one should interact with the other objects, or contains the harmonized water rights data. Here is each object described in detail: states: A character vector containing the state names for those states in which data was collected for. More importantly, the index of the state name is also the index in which that state's data can be found in the various following list objects. For example, if California is the third index in this object, the data for California will also be in the third index for each accompanying list. rightsByState_ground: A list of data frames with the cleaned ground water rights collected from each state. The column headers for each data frame are: waterRightID - The unique identifying ID of the water right, the same identifier as its state uses. basinNum - The alpha-numeric identifier of the WMA the record belongs to. priorityDate - The priority date associated with the right. allocatedFlow - The maximum flow of the allocation in cubic feet per second (ft3s-1). source - Whether the right is for surface water or groundwater. origWaterUse - The original stated water use from the state. waterUse - The water use category under the unified use categories established here. rightsByState_surface: A list of the cleaned surface water rights collected from each state. See rightsByState_ground for more details on how the data is formatted. fullRightsRecs: A list of the combined groundwater and surface water records for each state. Essentially, these lists are the merging of rightsByState_ground and rightsByState_surface by state. See rightsByState_ground for more details on how the data is formatted. projProj: The spatial projection used for map creation in the beginning of the project. Specifically, the World Geodetic System (WGS84) as a coordinate reference system (CRS) string in PROJ.4 format. wmaStateLabel: The name and/or abbreviation for what each state legally calls their WMAs. h2oUseByState: A list of spatial polygon data frames which contain the area(s) in which each water right is claimed to be used. It should be noted that not all water right records have a listed area(s) of use in this object. Currently, only Idaho and Washington provided valid data to be included in this object. h2oDivByState: A list of spatial points data frames which identifies the location of the Point of Diversion for the state's water rights. It should be noted that not all water right records have a listed Point of Diversion in this object. spatialWMAByState: A list of spatial polygon data frames which contain the spatial WMA boundaries for each state. The only data contained within the table are identifiers for each polygon. It is worth reiterating that Arizona is the only state in which the surface and groundwater WMA boundaries are not the same. wmaIDByState: A list which contains the unique ID values of the WMAs for each state. plottingDim: A character vector used to inform mapping functions for internal map making. Each state is classified as either "tall" or "wide", to maximize space on a typical 8x11 page.

Economics↗
DOE OSTI2024

HarDWR - Harmonized Water Rights Records

For a detailed description of the database of which this record is only one part, please see the HarDWR meta-record. Here we present a new dataset of western U.S. water rights records. This dataset provides consistent unique identifiers for each spatial unit of water management across the domain, unique identifiers for each water right record, and a consistent categorization scheme that puts each water right record into one of 7 broad use categories. These data were instrumental in conducting a study of the multi-sector dynamics of intersectoral water allocation changes through water markets (Grogan et al., in review). Specifically, the data were formatted for use as input to a process-based hydrologic model, WBM, with a water rights module (Grogan et al., in review). While this specific study motivated the development of the database presented here, U.S. west water management is a rich area of study (e.g., Anderson and Woosly, 2005; Tidwell, 2014; Null and Prudencio, 2016; Carney et al, 2021) so releasing this database publicly with documentation and usage notes will enable other researchers to do further work on water management in the U.S. west. The raw downloaded data for each state is described in Lisk et al. (in review), as well as here. The dataset is a series of various files organized by state sub-directories. The first two characters of each file name is the abbreviation for the state the in which the file contains data for. After the abbreviation is the text which describes the contents of the file. Here is each file type described in detail: XXFullHarmonizedRights.csv: A file of the combined groundwater and surface water records for each state. Essentially, this file is the merging of XXGroundwaterHarmonizedRights.csv and XXSurfaceWaterHarmonizedRights.csv by state. The column headers for each of this type of file are: state - The name of the state the data comes from. FIPS - The two-digit numeric state ID code. waterRightID - The unique identifying ID of the water right, the same identifier as its state uses. priorityDate - The priority date associated with the right. origWaterUse - The original stated water use(s) from the state. waterUse - The water use category under the unified use categories established here. source - Whether the right is for surface water or groundwater. basinNum - The alpha-numeric identifier of the WMA the record belongs to. CFS - The maximum flow of the allocation in cubic feet per second (ft3s-1). Arizona is unique among the states, as its surface and groundwater resources are managed with two different sets of boundaries. So, for Arizona, the basinNum column is missing and instead there are two columns: surBasinNum - The alpha-numeric identifier of the surface water WMA the record belongs to. grdBasinNum - The alpha-numeric identifier of the groundwater WMA the record belongs to. XXStatePOD.shp: A shapefile which identifies the location of the Points of Diversion for the state's water rights. It should be noted that not all water right records in XXFullHarmonizedRights.csv have coordinates, and therefore may be missing from this file. XXStatePOU.shp: A shapefile which contains the area(s) in which each water right is claimed to be used. Currently, only Idaho and Washington provided valid data to include within this file. XXGroundwaterHarmonizedRights.csv: A file which contains only harmonized groundwater rights collected from each state. See XXFullHarmonizedRights.csv for more details on how the data is formatted. XXSurfaceWaterHarmonizedRights.csv: A file which contains only harmonized surface water rights collected from each state. See XXFullHarmonizedRights.csv for more details on how the data is formatted. Additionally, one file, stateWMALabels.csv, is not stored within a sub-directory. While we have referred to the spatial boundaries that each state uses to manage its water resources as WMAs, this term is not shared across all states. This file lists the proper name for each boundary set, by state. For those whom may be interested in exploring our code more in depth, we are also making available an internal data file for convenience. The file is in .RData format and contains everything described above as well as some minor additional objects used within the code calculating the cumulative curves. For completeness, here is a detailed description of the various objects which can be found within the .RData file: states: A character vector containing the state names for those states in which data was collected for. More importantly, the index of the state name is also the index in which that state's data can be found in the various following list objects. For example, if California is the third index in this object, the data for California will also be in the third index for each accompanying list. rightsByState_ground: A list of data frames with the cleaned ground water rights collected from each state. This object holds the the data that is exported to created the xxGroundwaterHarmonizedRights.csv files. rightsByState_surface: A list of data frames with the cleaned surface water rights collected from each state. This object holds the the data that is exported to created the xxSurfaceWaterHarmonizedRights.csv files. fullRightsRecs: A list of the combined groundwater and surface water records for each state. This object holds the the data that is exported to created the xxFullHarmonizedRights.csv files. projProj: The spatial projection used for map creation in the beginning of the project. Specifically, the World Geodetic System (WGS84) as a coordinate reference system (CRS) string in PROJ.4 format. wmaStateLabel: The name and/or abbreviation for what each state legally calls their WMAs. h2oUseByState: A list of spatial polygon data frames which contain the area(s) in which each water right is claimed to be used. It should be noted that not all water right records have a listed area(s) of use in this object. Currently, only Idaho and Washington provided valid data to be included in this object. h2oDivByState: A list of spatial points data frames which identifies the location of the Point of Diversion for the state's water rights. It should be noted that not all water right records have a listed Point of Diversion in this object. spatialWMAByState: A list of spatial polygon data frames which contain the spatial WMA boundaries for each state. The only data contained within the table are identifiers for each polygon. It is worth reiterating that Arizona is the only state in which the surface and groundwater WMA boundaries are not the same. wmaIDByState: A list which contains the unique ID values of the WMAs for each state. plottingDim: A character vector used to inform mapping functions for internal map making. Each state is classified as either "tall" or "wide", to maximize space on a typical 8x11 page. The code related to the creation of this dataset can be viewed within HarDWR GitHub Repository/dataHarmonization.

Economics↗
DOE OSTI2020

HarDWR - Cumulative Water Rights Curves

A dataset within the Harmonized Database of Western U.S. Water Rights (HarDWR). For a detailed description of the database, please see the meta-record v2.0. Changelog v2.0 - Recalculated based on Harmonized Water Rights Records v2.0 sourced from WestDAAT - Added "Unspecified" was a water source category, and files associated with this category v1.01 - Updated the names of each file with an ID number less than 3 digits to include leading 0s v1.0 - Initial public release Description This product an updated version of the database used as input to the WBM model (Grogan et al. in review; Grogan et al. 2022), and is the result of the step creating cumulative water rights curves described in Lisk et al. (2024). This database contains 2,667 individual .csv files, three for each Water Management Area (WMA) in the 11-state region. File Naming WMA_[###]_[X]W.csv, where [###] is the unique identifier for each WMA, and [X] is either "S" for surface water rights, "G" for groundwater rights, or "U" for unspecified. Column headers in each file: Year: the priority date year CUML: the total cumulative water rights allocated up to this priority date year (ft3s-1) Irrigation: The percent of cumulative water rights allocated to the Irrigation category up to this priority date year (%) Domestic: The percent of cumulative water rights allocated to the Domestic category up to this priority date year (%) Livestock: The percent of cumulative water rights allocated to the Livestock category up to this priority date year (%) Fish: The percent of cumulative water rights allocated to the Fish category up to this priority date year (%) Industrial: The percent of cumulative water rights allocated to the Industrial category up to this priority date year (%) Environmental: The percent of cumulative water rights allocated to the Environmental category up to this priority date year (%) Other: The percent of cumulative water rights allocated to the Other category up to this priority date year (%) In addition to the database files, there is a companion .csv file, called stateWMAs_ID.csv. The main purpose of this file is to provide the means of translating between the [###] unique identifier and the various other id of the WMA the file is attached to. This translation file has five columns, which are: basinNum: The official state given alpha-numeric identifier of the WMA basinName: the state provided English name of the area, where applicable state: the state name uniID: a unique identifier we created by concatenating the state name, and underscore, and the state numerical ID ID: a unique numeric identifier we created as a requirement for the files to be used within WBM (Grogan et al. in review) For those whom may be interested in exploring our code more in depth, we are also making available an internal data file for convenience. The file is in .RData format and contains everything described above as well as some minor additional objects used within the code calculating the cumulative curves. For completeness, here is a detailed description of the various objects which can be found within the .RData file: states: A character vector containing the state names for those states in the study region. More importantly, the index of the state name is also the index in which that state's data can be found in the various following list objects. For example, if California is the second index in this object, the data for California will also be in the second index for each accompanying list. wmasRightsPersGrd: A list of nested lists of data frames. Each state has one entry in the top level list and consist of a list with one data frame per WMA. The data frames in this object are the same as the above described .csv files, specifically for groundwater. wmasRightsPersSur: A list of nested lists of data frames. Each state has one entry in the top level list and consist of a list with one data frame per WMA. The data frames in this object are the same as the above described .csv files, specifically for surface water. wmasRightsPersUnsp: A list of nested lists of data frames. Each state has one entry in the top level list and consist of a list with one data frame per WMA. The data frames in this object are the same as the above described .csv files, specifically for water from an unspecified source. wmasRightsTotsGrd: A list of nested lists of data frames. Each state has one entry in the top level list and consist of a list with one data frame per WMA. The values in the data frames of this object would be the equivalent to multiplying the CUML column by the sector percentage columns to create the sector total ft3s-1, specifically for groundwater. This object is provided for convenience to check out original total values, if desired. wmasRightsTotsSur: A list of nested lists of data frames. Each state has one entry in the top level list and consist of a list with one data frame per WMA. The values in the data frames of this object would be the equivalent to multiplying the CUML column by the sector percentage columns to create the sector total ft3s-1, specifically for surface water. This object is provided for convenience to check out original total values, if desired. wmasRightsTotsUnsp: A list of nested lists of data frames. Each state has one entry in the top level list and consist of a list with one data frame per WMA. The values in the data frames of this object would be the equivalent to multiplying the CUML column by the sector percentage columns to create the sector total ft3s-1, specifically for water from an unspecified source. This object is provided for convenience to check out original total values, if desired. wmaIDByState: A list of data frames which contain the by state allocation by WMA matrix. There is a matrix for each state in a different data frame within the object.

Economics↗
DOE OSTI2026

NATURF: Urban Building Parameters for Chicago, Illinois, USA at a 100m resolution

132 Urban parameters based on building physical dimensions and location were generated for the city of Chicago at 100m resolution using the NATURF model. To use the binary file with WRF, the binary file and the index file must be placed in their own directory in WRF_GEOG and accessed in the same way NUDAPT44 would be accessed.

Vernon, Chris R [Pacific Northwest National Labora↗
DOE OSTI2023

Accelerated pattern matching method on a quantum computing system

A method of determining a pattern in a sequence of bits using a quantum computing system includes setting a first register of a quantum processor in a superposition of a plurality of string index states, encoding a bit string in a second register of the quantum processor, encoding a bit pattern in a third register of the quantum processor, circularly shifting qubits of the second register conditioned on the first register, amplifying an amplitude of a state combined with the first register in which the circularly shifted qubits of the second register matches qubits of the third register, measuring an amplitude of the first register and determining a string index state of the plurality of string index states associated with the amplified state, and outputting, by use of a classical computer, a string index associated with the first register in the measured state.

NIROULA, Pradeep↗
DOE OSTI2024

Scalable method of fabricating structured polymers for passive daytime radiative cooling and other applications

A switchable light transmission module is disclosed that includes a substrate having a first surface defining at least part of an enclosed volume, a porous layer disposed on the first surface and in fluid communication with the enclosed volume, and a reservoir in fluid communication with the enclosed volume. The reservoir is configured to supply a fluid to the sealed volume such that the fluid contacts the porous layer. The fluid has a refractive index that is close to the refractive index of the porous layer, has a high wettability for the porous layer, and does not dissolve the porous layer. When in a dry state, voids in the porous layer are filled with air which has a much different refractive index than the porous layer itself, resulting in a surface that is reflective and not very transmissive. During wetting of the porous layer by the fluid, however, those voids are filled with the fluid, reducing the difference in refractive index across the polymer-fluid interfaces such that light scattering is negligible and the surface becomes light permeable.

Mandal, Jyotirmoy↗
DOE OSTI2022

Statistical framework to assess long-term spatio-temporal climate changes: East River mountainous watershed case study

Abstract Evaluation of long-term temporal and spatial climatic change in mountainous regions is a critical challenge because of the interactive effects of multiple land and climatic factors and processes. Here we present the application of the statistical framework to the assessment of changes of climatic conditions, using data from 17 meteorological stations across the East River watershed near Crested Butte, Colorado, USA, and spanning the period from 1966 to 2021. The framework is developed based on (1) a time-series analysis of daily, monthly, and yearly averaged meteorological parameters (temperature, relative humidity, precipitation, wind speed, etc.), (2) evaluation and time series analysis of potential evapotranspiration (ET o ), actual evapotranspiration (ET), aridity index (AI), standard precipitation index (SPI) and standard precipitation-evapotranspiration index (SPEI), and (3) a temporal-spatial climatic zonation of the studied area based on the hierarchical clustering and PCA analysis of the SPEI, because the SPEI can be considered an integrative characteristic of the changes of climatic conditions. The Budyko model, with the application of the Penman–Monteith equation for the estimation of ET o , was used to determine the ET. The time series analysis of the AI is used to identify the periods with energy limited and water limited conditions. Hierarchical clustering of site locations for the three temporal segments of the SPEI showed a significant temporal-spatial shifts, indicating that dynamic climatic processes drive zonation patterns. Therefore, the watershed climatic zonation requires periodic re-evaluation based on the structural time series analysis of meteorological and water balance data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Managing weather- and market price-related financial risks in algal biofuel production

Large-scale algae production has garnered interest due to its potential as a biofuel feedstock. Previous research assessing the profitability of algae products has been mostly based on values averaged over time, but algae production and resulting financial returns exhibit significant variability due to weather and fluctuations in selling prices for algae-based products. In other sectors, producers often reduce weather- and market price-related financial risk with financial instruments such as insurance, but little research has been performed on the design of insurance products to protect algae producers. Furthermore, this study develops a novel index-based insurance instrument that pays-out during unfavorable weather and market conditions, then explores the instrument's effectiveness, combined with a cash reserve, in reducing revenue stream variability for an algae producer. Results indicate that a biophysically based index-insurance product tailored to the specific financial risks in algae production can reduce variability in net revenues and can do so at a lower cost than relying solely on cash reserves, the most common financial risk management tool. Assessing the performance of index-insurance in algae production is particularly timely given the passage of the 2018 Farm Bill, which newly opens opportunities for the USDA to provide crop insurance to algae producers.

09 BIOMASS FUELS↗
DOE OSTI2022

Porous but Mechanically Robust All-Inorganic Antireflective Coatings Synthesized using Polymers of Intrinsic Microporosity

Herein, we introduce polymer of intrinsic microporosity 1 (PIM-1) to design single-layer and multilayered all-inorganic antireflective coatings (ARCs) with excellent mechanical properties. Using PIM-1 as a template in sequential infiltration synthesis (SIS), we can fabricate highly uniform, mechanically stable conformal coatings of AlO x with porosities of ~50% and a refractive index of 1.41 compared to 1.76 for nonporous AlO x that is perfectly suited for substrates commonly used in high-end optical systems or touch screens (e.g., sapphire, conductive glass, bendable glass, etc.). We show that such films can be used as a single-layer ARC capable of reduction of the Fresnel reflections of sapphire to as low as 0.1% at 500 nm being deposited only on one side of the substrate. We also demonstrate that deposition of the second layer with higher porosity using block copolymers enables the design of graded-index double-layered coatings. AlO x structures with just two layers and a total thickness of less than 200 nm are capable of reduction of Fresnel reflections under normal illumination to below 0.5% in a broad spectral range with 0.1% reflection at 700 nm. Additionally, and most importantly, we show that highly porous single-layer and graded-index double-layered ARCs are characterized by high hardness and scratch resistivity. The hardness and the maximum reached load were 7.5 GPa and 13 mN with a scratch depth of about 130 nm, respectively, that is very promising for the structures consisting of two porous AlO x layers with 50% and 85% porosities, correspondingly. Such mechanical properties of coatings can also allow their application as protective layers for other optical coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Strong Sensitivity of Simulated Biomass Burning Aerosol Transport and Radiative Effects Over the South Atlantic to Carbonaceous Aerosol Aging and Particle Density

Biomass burning aerosol (BBA) impacts climate through aerosol‐cloud‐radiation interactions, but models disagree on the sign and magnitude of BBA radiative effects. We quantify the sensitivity of BBA radiative effects and transport to three BBA‐relevant processes and properties: parameterized oxidative aging of organic aerosol (OA), a combined change to black carbon (BC) density and the method for calculating aerosol refractive index, and reduction in OA density. We evaluate Unified Model simulations against two aircraft campaigns from summer 2017 over the Southeast Atlantic. The model generally performs well, such that discrepancies between the observational data sets may sometimes limit the precision of the evaluation. Our newly developed aging parameterization reproduces observed OA:BC mass ratios well and allows modeled OA:BC to decrease with smoke age, but increases bias in aerosol extinction and changes the BBA radiative effect little (+0.12 W m -2 ). We calculate aerosol refractive index using either a volume‐weighted component average or the Maxwell‐Garnett (MG) mixing assumption, which represents BC as small inclusions in a host material. Compared to MG mixing, the volume‐weighted average refractive index and reduced BC density increase aerosol absorption, substantially increasing the total BBA radiative effect (+2.66 W m -2 ) and amount of BBA transported across the ocean through BC self‐lofting. Reducing OA density to better match literature values changes the total BBA radiative effect by −1.96 W m -2 . Changes to direct radiative effects exceed changes to cloud radiative effects. Our findings emphasize the sensitivity of aerosol radiative effects and transport to these processes and properties, which we suggest could be improved in climate models.

Southeast Atlantic↗
DOE OSTI2021

Ionizing photon interactions modulate the optical properties of crystals with femtosecond scale temporal resolution

In this work, we continue our study of a new method for the detection of ionizing radiation with the potential for a dramatic improvement in coincidence time resolution (CTR) for time-of-flight positron emission tomography (ToF-PET) using the modulation of a material's optical properties instead of the scintillation mechanism. Our previous work has shown that for non-scintillation materials such as bismuth silicon oxide (BSO) and cadmium telluride (CdTe), their refractive index can be modulated by annihilation photon interactions. Additionally, the ultrafast nature of this process however remains unexplored. The ionizing radiation-induced charge carriers alter the local band structure in these materials, thus changing the complex refractive index. This mechanism is routinely used at the linac coherent light source (LCLS) facility of the SLAC National Accelerator Laboratory to measure x-ray pulse arrival times with femtosecond scale resolution for photon energies between 0.5 and 10 keV. The method described here follows that example by using a frequency chirped visible continuum pulse to provide a monotonic wavelength-to-time mapping by which one can measure the time-dependent refractive index modulation. In addition, we describe an interference-based measurement setup that allows for significantly improved sensitivity while preserving a timing precision of approximately 10 fs (σ) when measuring the arrival time of below 10 keV x-ray pulses with yttrium aluminum garnet (YAG) crystal. The method is presented in the context of ToF-PET application with further discussions on the potential CTR achievable if a similar detection concept is adopted for detecting 511 keV photons. Semi-empirical analysis indicates that the predicted CTR achievable is on the order of 1 ps (FWHM).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

3D Printing of Transparent Silicone Elastomers

Here in this paper, inks for transparent elastomers that are formulated by matching the refractive index of silica and polysiloxanes are described. The transparent inks transmit up to ≈90% of 700 nm light through 1 cm and remain transparent when solidified. The inks and solidified materials exhibit a thermochromic effect. This thermochromic effect can be controlled by the refractive index mismatch. Transparency may increase or decrease as temperature increases, depending on the refractive index mismatch of the base polysiloxane and silica. It is found that the rheological properties of the ink depend on the distribution of silica particles, which is dictated by silica functionality, weight content, and processing. Siloxane precursors that vary in chemical functionality are introduced to tailor the mechanical properties of the printed elastomers, which obtain stretchability >65% along with a tensile modulus of 1.9 MPa. After optimizing siloxane chemistry and ink processing, the authors are able to print transparent elastomers. Potential applications are demonstrated for printed structures by printing encapsulation structures for light-emitting diodes, semitransparent dye-filled structures, a microfluidic mixing device, and a multimaterial structure that exhibits temperature-dependent camouflage.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Assessment of frequency and amplitude dependence on the cyclic degradation of polyurethane foams

Many energy absorption applications utilize flexible polymeric foams for their viscoelastic properties. It is desired that the material will perform consistently across repeated compression cycles. This study examines the effect of fatigue at low strain rates on the viscoelasticity of open-cell polyurethane foam. Six polyurethanes of the same base composition with two porosities (70% and 80%) and three chemical indexes (79i, 100i, and 121i) are tested. Large deformation cyclic compression of the foams is conducted on a universal testing system (UTS). These data are then post-processed leveraging dynamic mechanical analysis Fourier transform rheology to characterize changes in the viscoelasticity of the materials over fatigue cycles. Results show that foams can increase or decrease in stiffness up to 10% over 10 4 cycles. Specifically, higher chemical index, higher excitation frequency, and larger excitation amplitude correlate with a more pronounced decrease in stiffness. Damping can also change by 15% and correlates with chemical index and excitation frequency. Consequently, the findings suggest that internal foam structure and bulk material properties as well as applied loading parameters affect the viscoelastic fatigue response of flexible polymeric foams.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A nomogram for prediction of stage III/IV gastric cancer outcome after surgery: A multicenter population‐based study

Abstract Most patients with gastric cancer (GC) are first diagnosed at stage III‐IV and surgery resection remains the primary therapeutic modality for these patients. However, clinical staging used for prediction of those patients provides limited information. We collected clinicopathological data and disease‐progression information from 508 patients with stage III‐IV GC at three Chinese hospitals and 1298 patients from the Surveillance, Epidemiology, and End Results database. Based on the stepwise multivariate regression model, we constructed a novel nomogram to predict overall survival (OS). The performance of discrimination for this model was measured using Harrell's concordance index (C‐index) and receiver‐operating characteristic curve (ROC), and was validated using calibration plots. Multivariate Cox regression analyses showed that tumor size, age at diagnosis, N stage, tumor grade, and distant metastases were outstanding independent prognostic factors of stage III‐IV GC. We developed a nomogram based on these five prognostic predictors. In the training set, the C‐index of the nomogram was 0.645 (95% CI: 0.611‐0.679), which was higher than that of the American Joint Committee on Cancer TNM system alone (sixth TNM: 0.544; seventh TNM: 0.575; eighth TNM: 0.568). Similar results were observed in validation cohort. Moreover, calibration blots demonstrated good consistency between the actual and predicted OS probabilities. According to the nomogram, GC individuals could be classified into three groups (low‐, middle‐, and high‐risk) ( P < .001). Our nomogram complements the current staging system for prediction of individual prognosis with stage III‐IV GC, and may be helpful for making individualized treatment decisions.

Gao, Zhiying↗
DOE OSTI2022

Phylogenetic structure of specialization: A new approach that integrates partner availability and phylogenetic diversity to quantify biotic specialization in ecological networks

Abstract Biotic specialization holds information about the assembly, evolution, and stability of biological communities. Partner availabilities can play an important role in enabling species interactions, where uneven partner availabilities can bias estimates of biotic specialization when using phylogenetic diversity indices. It is therefore important to account for partner availability when characterizing biotic specialization using phylogenies. We developed an index, phylogenetic structure of specialization (PSS), that avoids bias from uneven partner availabilities by uncoupling the null models for interaction frequency and phylogenetic distance. We incorporate the deviation between observed and random interaction frequencies as weights into the calculation of partner phylogenetic α‐diversity. To calculate the PSS index, we then compare observed partner phylogenetic α‐diversity to a null distribution generated by randomizing phylogenetic distances among the same number of partners. PSS quantifies the phylogenetic structure (i.e., clustered, overdispersed, or random) of the partners of a focal species. We show with simulations that the PSS index is not correlated with network properties, which allows comparisons across multiple systems. We also implemented PSS on empirical networks of host–parasite, avian seed‐dispersal, lichenized fungi–cyanobacteria, and hummingbird pollination interactions. Across these systems, a large proportion of taxa interact with phylogenetically random partners according to PSS, sometimes to a larger extent than detected with an existing method that does not account for partner availability. We also found that many taxa interact with phylogenetically clustered partners, while taxa with overdispersed partners were rare. We argue that species with phylogenetically overdispersed partners have often been misinterpreted as generalists when they should be considered specialists. Our results highlight the important role of randomness in shaping interaction networks, even in highly intimate symbioses, and provide a much‐needed quantitative framework to assess the role that evolutionary history and symbiotic specialization play in shaping patterns of biodiversity. PSS is available as an R package at https://github.com/cjpardodelahoz/pss .

59 BASIC BIOLOGICAL SCIENCES↗