Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

ON THE CONVERGENCE OF MAGNETOROTATIONAL TURBULENCE IN STRATIFIED ISOTHERMAL SHEARING BOXES

We consider the problem of convergence in stratified isothermal shearing boxes with zero net magnetic flux. We present results with the highest resolution to date—up to 200 grid points per pressure scale height—that show no clear evidence of convergence. Rather, the Maxwell stresses continue to decrease with increasing resolution. We propose some possible scenarios to explain the lack of convergence based on multi-layer dynamo systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Small scatter and nearly isothermal mass profiles to four half-light radii from two-dimensional stellar dynamics of early-type galaxies

We study the total mass–density profile for a sample of 14 fast-rotator early-type galaxies (stellar masses 10.2≲logM{sub ∗}/M{sub ⊙}≲11.7). We combine observations from the SLUGGS and ATLAS{sup 3D} surveys to map out the stellar kinematics in two dimensions, out to a median radius for the sample of four half-light radii R{sub e} (or 10 kpc) and a maximum radius of 2.0–6.2 R{sub e} (or 4–21 kpc). We use axisymmetric dynamical models based on the Jeans equations, which allow for a spatially varying anisotropy; employ quite general profiles for the dark halos; and, in particular, do not place any restrictions on the profile slope. This is made possible by the availability of spatially extended two-dimensional kinematics. We find that our relatively simple models provide a remarkably good description of the observed kinematics. The resulting total density profiles are well described by a nearly isothermal power law ρ{sub tot}(r)∝r{sup −γ} from R{sub e}/10 to at least 4R{sub e}, the largest average deviation being 11%. The average logarithmic slope is 〈γ〉=2.19±0.03 with observed rms scatter of just σ{sub γ}=0.11. This scatter out to large radii, where dark matter dominates, is as small as previously reported by lensing studies around r ≈ R{sub e}/2, where the stars dominate. Our bulge–halo conspiracy places much tighter constraints on galaxy formation models. It illustrates the power of two-dimensional stellar kinematics observations at large radii. It is now important to test the generality of our results for different galaxy types and larger samples.

79 ASTRONOMY AND ASTROPHYSICS↗

Rapid construction of insulated genetic circuits via synthetic sequence-guided isothermal assembly

In vitro recombination methods have enabled one-step construction of large DNA sequences from multiple parts. Although synthetic biological circuits can in principle be assembled in the same fashion, they typically contain repeated sequence elements such as standard promoters and terminators that interfere with homologous recombination. Here we use a computational approach to design synthetic, biologically inactive unique nucleotide sequences (UNSes) that facilitate accurate ordered assembly. Importantly, our designed UNSes make it possible to assemble parts with repeated terminator and insulator sequences, and thereby create insulated functional genetic circuits in bacteria and mammalian cells. Using UNS-guided assembly to construct repeating promoter-gene-terminator parts, we systematically varied gene expression to optimize production of a deoxychromoviridans biosynthetic pathway in Escherichia coli. We then used this system to construct complex eukaryotic AND-logic gates for genomic integration into embryonic stem cells. Construction was performed by using a standardized series of UNS-bearing BioBrick-compatible vectors, which enable modular assembly and facilitate reuse of individual parts. UNS-guided isothermal assembly is broadly applicable to the construction and optimization of genetic circuits and particularly those requiring tight insulation, such as complex biosynthetic pathways, sensors, counters and logic gates.

Torella, JP↗

Formation of Y{sub 2}O{sub 3} nanoclusters in nanostructured ferritic alloys during isothermal and anisothermal heat treatment: A kinetic Monte Carlo study

Kinetic Monte Carlo simulations, based on parameters obtained with density-functional theory in the local-density approximation and experimental data, are used to study bulk precipitation of Y{sub 2}O{sub 3} in {alpha} iron. The simulation involves realistic diffusion mechanisms, with a rapid diffusion of O atoms by interstitial jumps and a slower diffusion of Fe and Y atoms by vacancy jumps, and a point defect source which drives the vacancy concentration toward its equilibrium value, during isothermal and anisothermal heat treatments. Depending on alloy and thermal history conditions, the Monte Carlo simulations predict different kinetic behavior, including transient precipitation of metastable iron oxides followed by precipitation of Y{sub 2}O{sub 3} nanoclusters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Schwarzschild-anti-de Sitter black holes within isothermal cavity: Thermodynamics, phase transitions, and the Dirichlet problem

The thermodynamics of Schwarzschild black holes within spherical isothermal cavities in anti-de Sitter (AdS) space is studied for arbitrary dimensions in the semiclassical approximation of the Euclidean path integral of quantum gravity. For such boundary conditions, known classical solutions are a hot AdS and two or no Schwarzschild-AdS depending on whether or not the wall-temperature of the cavity is above or below a minimum value. Earlier work in four dimensions with such boundary conditions showed that the larger and smaller holes have positive and negative specific heats and hence are locally thermodynamically stable and unstable, respectively. The standard area-law of entropy was known to hold too. We derive the area-law for arbitrary dimensions and show that qualitative behavior of local stability remains the same. Then using a careful analysis of the associated Dirichlet boundary-value problem we address global issues. We find that for wall-temperatures above a critical value a phase transition takes hot AdS to the larger Schwarzschild-AdS. The larger hole thus can be globally thermodynamically stable. We find that the smaller the cavity the higher the critical temperature for phase transition is and it always remains above the minimum temperature needed for the classical existence of the holes in that cavity. In the infinite limit of cavity this picture reduces to that considered by Hawking and Page. All these hold for arbitrary dimensions, however the case of five dimensions turns out to be special in that the Dirichlet problem can be solved exactly giving exact analytic expressions for the black-hole masses as functions of boundary variables (cavity-radius and temperature). This makes it possible to compute the on-shell Euclidean action as a function of boundary variables too from which other quantities of interest can be evaluated. In particular, we obtain the minimum temperature (for the holes to exist classically) and the critical temperature (for phase transition) as functions of the cavity-radius in five dimensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of isothermal stratification strength on vorticity dynamics for single-mode compressible Rayleigh-Taylor instability

The effects of isothermal initial stratification on the dynamics of the vorticity for single-mode Rayleigh-Taylor instability (RTI) are examined using two-dimensional fully compressible wavelet-based direct numerical simulations. Here, the simulations model low Atwood number ( A = 0.04) RTI development for four different initial stratification strengths, corresponding to Mach numbers from 0.3 (weakly stratified) to 1.2 (strongly stratified), and for three different Reynolds numbers, from 25 500 to 102 000. Here, the Mach number is based on the Atwood-independent gravity wave speed and characterizes the strength of the initial stratification. All simulations use adaptive wavelet-based mesh refinement to achieve very fine spatial resolutions at relatively low computational cost. For all stratifications, the RTI bubble and spike go through the exponential growth regime, followed by a slowing of the RTI evolution.

42 ENGINEERING↗

Design of a Solar Reactor to Split CO2 Via Isothermal Redox Cycling of Ceria

The design procedure for a 3 kWth prototype solar thermochemical reactor to implement isothermal redox cycling of ceria for CO2 splitting is presented. The reactor uses beds of mm-sized porous ceria particles contained in the annulus of concentric alumina tube assemblies that line the cylindrical wall of a solar cavity receiver. The porous particle beds provide high surface area for the heterogeneous reactions, rapid heat and mass transfer, and low pressure drop. Redox cycling is accomplished by alternating flows of inert sweep gas and CO2 through the bed. The gas flow rates and cycle step durations are selected by scaling the results from small-scale experiments. Thermal and thermo-mechanical models of the reactor and reactive element tubes are developed to predict the steady-state temperature and stress distributions for nominal operating conditions. The simulation results indicate that the target temperature of 1773K will be reached in the prototype reactor and that the Mohr-Coulomb static factor of safety is above two everywhere in the tubes, indicating that thermo-mechanical stresses in the tubes remain acceptably low.

Bader, R↗

Non-isothermal crystallization kinetics of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass containing nucleation agent P{sub 2}O{sub 5}/TiO{sub 2}

Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass ceramics containing nucleation agent P{sub 2}O{sub 5}/TiO{sub 2} were prepared by sol-gel method. The samples were characterized by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The activation energy and kinetic parameters for crystallization of the samples were calculated by the Johnson-Mehi-Avrami (JMA) model and Augis-Bennett method according to the results of DSC. The results showed that the crystallization mechanism of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass, whose non-isothermal kinetic parameter n = 2.3, was consistent with surface crystallization of the JMA model. The kinetics model function of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass, f(α) = 2.3(1–α)[–ln(1–α)]{sup 0.57}, was also obtained. The addition of nucleation agent P{sub 2}O{sub 5}/TiO{sub 2} could reduce the activation energy, which made the crystal growth modes change from onedimensional to three-dimensional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isothermal vs. isentropic description of protoneutron stars in the Brueckner-Bethe-Goldstone theory

We study the structure of hadronic protoneutron stars within the finite-temperature Brueckner-Bethe-Goldstone theoretical approach. Assuming beta-equilibrated nuclear matter with nucleons and leptons in the stellar core, with isothermal or isentropic profile,we show that particle populations and equation of state are very similar. As far as the maximum mass is concerned, we find that its value turns out to be almost independent of T, while a slight decrease is observed in the isentropic case, due to the enhanced proton fraction in the high-density range.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of dust charge fluctuations on dust acoustic structures in magnetized dusty plasma containing nonextensive electrons and two-temperature isothermal ions

Effect of dust electrical charge fluctuations on the nature of dust acoustic solitary waves (DASWs) in a four-species magnetized dusty plasma containing nonextensive electrons and two-temperature isothermal ions has been investigated. In this model, the negative dust electric charge is considered to be proportional to the plasma space potential. The nonlinear Zakharov–Kuznetsov (ZK) and modified Zakharov–Kuznetsov (mZK) equations are derived for DASWs by using the standard reductive perturbation method. The combined effects of electron nonextensivity and dust charge fluctuations on the DASW profile are analyzed. The different ranges of the nonextensive q-parameter are considered. The results show that solitary waves the amplitude and width of which depend sensitively on the nonextensive q-parameter can exist. Due to the electron nonextensivity and dust charge fluctuation rate, our dusty plasma model can admit both positive and negative potential solitons. The results show that the amplitude of the soliton increases with increasing electron nonextensivity, but its width decreases. Increasing the electrical charge fluctuations leads to a decrease in both the amplitude and width of DASWs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dust ion acoustic solitary structures in the presence of isothermal positrons

The Sagdeev potential technique has been employed to study the dust ion acoustic solitary waves and double layers in an unmagnetized collisionless dusty plasma consisting of negatively charged static dust grains, adiabatic warm ions, isothermally distributed electrons, and positrons. A computational scheme has been developed to draw the qualitatively different compositional parameter spaces or existence domains showing the nature of existence of different solitary structures with respect to any parameter of the present plasma system. The present system supports both positive and negative potential double layers. The negative potential double layer always restricts the occurrence of negative potential solitary waves, i.e., any sequence of negative potential solitary waves having monotonically increasing amplitude converges to a negative potential double layer. However, there exists a parameter regime for which the positive potential double layer is unable to restrict the occurrence of positive potential solitary waves. As a result, in this region of the parameter space, there exist solitary waves after the formation of positive potential double layer, i.e., positive potential supersolitons have been observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Formation of Carbide-Free Bainite in High-Carbon High-Silicon Steel under Isothermal Conditions

It is shown that a carbide-free bainite structure can be formed in high-carbon steel of the Fe–Si–Mn–Cr–V system using a traditional furnace facility. The structural aspects of bainitic transformation developing under isothermal conditions at 300°C have been studied by the methods of X-ray diffraction and transmission electron microscopy. Orientation relationships between crystalline lattices of γ and α phases have been established. A superequilibrium carbon concentration in the bainite α phase has been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solvation and Ion Pair Association in Aqueous Metal Sulfates: Interpretation of NDIS raw data by isobaric-isothermal molecular dynamics simulation.

We analyzed the solvation behavior of aqueous lithium, nickel, and ytterbium sulfates at ambient conditions in terms of the relevant radial distributions functions and the corresponding first-order difference of the sulfur-site neutronweighted distribution functions generated by isothermal-isobaric molecular dynamics simulation. We determined of the partial contributions to the neutronweighted distribution functions, to identify the main peaks, and the effect of the contact ion-pair configuration on the resulting H ! S coordination number. Finally, we assessed the extent of the ion-pair formation according to Poirier- DeLap formalism and highlighted the significant increase of the ion-pair association exhibited by these salts with cation charge.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First-Principles Modeling of the Repassivation of Corrosion Resistant Alloys: Part II. Surface Adsorption Isotherms for Alloys and the Chloride Susceptibility Index

Quantitatively predicting the corrosion resistance of alloys is vital to the design and application of the next generation of superior corrosion resistant alloys (CRAs). Here, the Chloride Susceptibility Index (CSI), a scientifically based quantitative descriptor for repassivation tendency of CRAs, is proposed as a metric constructed through combining atomistically resolved information regarding adsorption and alloy surface composition with environmental conditions such as applied potential, temperature, pH, and Cl – concentration. Using this method, the response of CRAs to relevant environments can be predicted. CSI is determined by: (1) estimation of thermoequilibrium surface coverages of O and Cl by a Langmuir isotherm model using adsorption energies of different species (O, Cl, OH, H 2 O) obtained from DFT. (2) determination of CSI by integrating Cl surface coverage over a realistic window of applied potentials, thereby incorporating the effect of Cl surface coverage and electrochemical environment simultaneously. A series of Ni-Cr-X alloys was used as an example to develop and validate the method through studying the effect of different alloy solutes X on chloride resistance. Here, the trends and relations predicted by CSI are in qualitative agreements with experimental observations. Moreover, a quantitative correlation is found between CSI and the repassivation potential.

36 MATERIALS SCIENCE↗

Effect of Temperature and FEC on Silicon Anode Heat Generation Measured by Isothermal Microcalorimetry

Isothermal microcalorimetry (IMC) was used to better understand parasitic reactions and heat generation from Si electrodes in the first 10 cycles using Li/Si half cells. Heat generation from cell polarization (ohmic heat), entropy changes (reversible heat), and parasitic reactions (parasitic heat) are separated and quantified. The effect of temperature and fluoroethylene carbonate (FEC) as an electrolyte additive are also explored. Our results show that at the C/10 cycling rate used here, ohmic heat makes the largest contribution to overall heat generation while reversible heat is the smallest. Ohmic heat generation increases with cycle number due to increasing internal resistance, though the effect is smaller for cells with FEC. Interestingly, capacity-normalized parasitic heat generation is largely unaffected by changes in temperature despite differing reaction kinetics. We show that this is caused by a decrease in average parasitic reaction enthalpy as temperature is increased. Further, cells with FEC display higher average parasitic reaction enthalpy than cells without. The average parasitic reaction enthalpies for all the Si electrodes we tested were lower than previously reported values for graphite, indicating that the SEI formed on Si is less stable.

25 ENERGY STORAGE↗

Isothermal Microcalorimetry Analysis of Li/ β -MnO 2 Discharge

Despite widespread use over several decades, the lithium/manganese dioxide (Li/MnO 2 ) discharge mechanism is not completely understood owing to the structural complexity of the material. However, an improved understanding could lead to broader adoption as a primary and even secondary cathode material. Here, we examine the discharge of single-phaseβ-MnO 2 using isothermal microcalorimetry for the first time. Equilibrium voltage and entropy changes are characterized over the entire discharge range and used to rationalize the results. These measurements are supplemented by electrochemical impedance and X-ray diffraction data that give the clearest picture of theβ-MnO 2 lithiation process to date. We find that the first half of discharge is dominated by a two-phase reaction to form Li 0.5 MnO 2 followed by single-phase insertion to a composition of Li 1.0 MnO 2 , which confirms prior first-principles calculations. The tetragonalβ-MnO 2 lattice undergoes asymmetric expansion from Jahn-Teller distorted Mn 3+ to form an orthorhombic LiMnO 2 phase which retains the 1 × 1 tunnel structure. Microcalorimetry results suggest the presence of parasitic reactions occurring during the second half of discharge, which could arise from decomposition of electrolyte or release and reaction of residual water retained in the structure.

Electrochemistry↗

T2Well/ECO2N Version 1.0: Multiphase and Non-Isothermal Model for Coupled Wellbore-Reservoir Flow of Carbon Dioxide and Variable Salinity Water

T2Well/ECO2N is a coupled wellbore and reservoir model for simulating the dynamics of CO2 injection and leakage through wellbores. It can be seen as an extension to standard TOUGH/ECO2N V2.0, and can be applied to situations relevant to geologic CO2 storage involving upward flow (e.g., leakage) and downward flow (injection). The new simulator integrates a wellbore-reservoir system by assigning the wellbore and reservoir to two different sub-domains in which flow is controlled by appropriate physical laws. In the reservoir, we model flow using a standard multiphase Darcy flow approach. In the wellbores, we use the Drift-Flux Model and related conservation equations for describing transient two-phase non-isothermal wellbore flow of CO2-water mixtures. The mass and thermal energy balance equations are solved numerically by a finite difference scheme with wellbore heat transmission to the surrounding rock handled either semi-analytically or numerically. The momentum balance equation for the flow in the wellbore is solved numerically with a semi-explicit scheme.

Oldenburg, CurtM↗

TOGA: A TOUGH code for modeling three-phase, multi-component, and non-isothermal processes involved in CO2-based Enhanced Oil Recovery (TOGA) v1.0

TOGA (TOUGH Oil, Gas, Aqueous) is a numerical reservoir simulator for modeling non-isothermal flow and transport of water, CO2, multicomponent oil, and related gas components for applications including CO2-enhanced oil recovery (CO2-EOR) and geologic carbon sequestration in depleted oil and gas reservoirs. TOGA uses an approach based on the Peng-Robinson equation of state (PR-EOS) to calculate the thermophysical properties of the gas and oil phases including the gas/oil components dissolved in the aqueous phase, and uses a mixing model to estimate the thermophysical properties of the aqueous phase.

Oldenburg, CurtisM↗