Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Extragalactic Magnetism with SOFIA (Legacy Program). I. The Magnetic Field in the Multiphase Interstellar Medium of M51*

The recent availability of high-resolution far-infrared (FIR) polarization observations of galaxies using HAWC+/SOFIA has facilitated studies of extragalactic magnetic fields in the cold and dense molecular disks. We investigate whether any significant structural differences are detectable in the kiloparsec-scale magnetic field of the grand design face-on spiral galaxy M51 when traced within the diffuse (radio) and the dense and cold (FIR) interstellar medium (ISM). Our analysis reveals a complex scenario where radio and FIR polarization observations do not necessarily trace the same magnetic field structure. We find that the magnetic field in the arms is wrapped tighter at 154 μm than at 3 and 6 cm; statistically significant lower values for the magnetic pitch angle are measured at FIR in the outskirts (R ≥ 7 kpc) of the galaxy. This difference is not detected in the interarm region. We find strong correlations of the polarization fraction and total intensity at FIR and radio with the gas column density and 12CO(1–0) velocity dispersion. We conclude that the arms show a relative increase of small-scale turbulent B-fields at regions with increasing column density and dispersion velocities of the molecular gas. No correlations are found with H i neutral gas. The star formation rate shows a clear correlation with the radio polarized intensity, which is not found in FIR, pointing to a small-scale dynamo-driven B-field amplification scenario. This work shows that multiwavelength polarization observations are key to disentangling the interlocked relation between star formation, magnetic fields, and gas kinematics in the multiphase ISM.

Spiral galaxies↗
NASA NTRS2020

System Engineering a Solar Thermal Propulsion Mission Concept for Rapid Interstellar Medium Access

The interstellar medium (ISM) represents the next frontier in space exploration, with many new discoveries to be made. The challenge, being so far away from Earth, the ISM requires many decades to reach. To advance our knowledge of what exists beyond our Solar System, new approaches for rapid access are required. One such approach is solar thermal propulsion (STP). The approach uses several Venus and Earth gravity assists to fly to Jupiter and use its gravity well to dive towards the Sun. Approaching within 3 solar radii a perihelion burn would be performed, maximizing the spacecraft’s ΔV to achieve high Solar System escape velocities. A unique aspect of the STP mission concept is that the Sun is not only used as a gravity well for an Oberth manoeuvre, but also to heat the fuel to ultra-high-temperatures (>3000 K), enabling a monopropellant burn with high specific impulse (Isp). Prior preliminary studies indicated escape velocities of over 20 astronomical unit (AU)/yr would be possible. An in-depth modelling exercise was undertaken to determine how such a system would perform. The model in this paper showed the current STP design is capable of providing just under 9±1 AU/yr, but there are many technology developments that could increase escape velocity. The technologies vary from items that could be implemented in the near term, like turbo-pumps driven by the hydrogen, to items requiring more extensive development programs like thin coatings which do not erode in superheated hydrogen. After reviewing the STP approach, and comparing it to a solid rocket motor (SRM), it was found that with currently available technology, SRM outperforms STP with an escape velocity of approximately 10-12 AU/yr. However, future advances in heat exchanger lining materials, turbo pumps, and advanced heat exchanger geometries may enable solar thermal propulsion to provide higher escape velocities, providing one of the fastest ways to exit the solar system. Ultimately, if all technology paths could be implemented with minimal side effects, the performance in a best-case scenario could reach up to 16 AU/yr.

Alkalai, Leon↗
NASA NTRSDate not supplied

ICEE: Next Generation Exobiology and Astrobiology Studies

The presence of organic molecules, from simple to complex form are found in the ISM (interstellar medium). Perhaps the largest of these molecules are the PAHs, or polycyclic aromatic hydrocarbons, while smaller versions of PAHs have been identified in meteorites, IDPs (interplanetary dust particles) and comets within the Solar System. Life is comprised of organic molecules and, in one sense; the search for life is the search for and identification of organic molecules. This yields an interesting question. Can the organics in the ISM serve as the chemical feedstock to the prebiotic molecules identified in meteorites, comets and IDPs in a “Top-Down” synthesis mechanism? Most studies regarding the formation of prebiotic molecules focus on a “Bottoms-Up” mechanism, whereby simple organic compounds in ice form larger, more biologically relevant molecules when exposed to UV irradiation. Here we present a next generation experimental setup which focuses on if larger, interstellar organics, such as PAHs (polycyclic aromatic hydrocarbons) can serve as the chemical feedstock for the organic inventory found in the Solar System.

A. L. Mattioda↗
NASA NTRS2022

Accurate Modeling of Lyα Profiles and their Impact on Photolysis of Terrestrial Planet Atmospheres

Accurately measuring and modeling the Lyα (Lyα; λ1215.67 Å) emission line from low-mass stars is vital for our ability to build predictive high energy stellar spectra, yet interstellar medium (ISM) absorption of this line typically prevents model-measurement comparisons. Lyα also controls the photodissociation of important molecules, like water and methane, in exoplanet atmospheres such that any photochemical models assessing potential biosignatures or atmospheric abundances require accurate Lyα host star flux estimates. Recent observations of three early M and K stars (K3, M0, M1) with exceptionally high radial velocities (>100 km s −1 ) reveal the intrinsic profiles of these types of stars as most of their Lyα flux is shifted away from the geocoronal line core and contamination from the ISM. These observations indicate that previous stellar spectra computed with the PHOENIX atmosphere code have underpredicted the core of Lyα in these types of stars. With these observations, we have been able to better understand the microphysics in the upper atmosphere and improve the predictive capabilities of the PHOENIX atmosphere code. Since these wavelengths drive the photolysis of key molecular species, we also present results analyzing the impact of the resulting changes to the synthetic stellar spectra on observable chemistry in terrestrial planet atmospheres.

Sarah Peacock↗
NASA NTRSDate not supplied

NASA Technology Maturation Plan for In-space Manufacturing of Metals

As the International Space Station’s (ISS) life approaches its end, NASA intends to travel back to the Moon and establish a sustainable presence, paving a pathway towards Mars. A fundamental shift in the current logistics strategy is required to support extended missions. On-demand manufacturing enables reduced operational cost and increased long term sustainability providing a pathway towards reducing NASA’s logistics burden. The In-Space Manufacturing (ISM) portfolio at Marshall Space Flight Center is developing additive polymers, metals, and electronics manufacturing technologies to enable a sustainable presence on the Moon and enable long-duration transit missions. Manufacturing systems for in-space applications must meet a unique set of constraints requiring a maturation path independent from processes targeted for terrestrial use. In May 2023, the On Demand Manufacturing of Metals (ODMM) project, part of the ISM portfolio funded through the Game Changing Development (GCD) program office, was canceled; however, prior to cancelation, the engineering team developed a technology maturation plan for in-space manufacturing of metallic components. The status of ODMM at closeout and an overview of the technology maturation plan for ODMM are discussed.

In Space Manufacturing↗
NASA NTRS2024

Input Waste Stream Modeling for Trash Management, Recycling, and Manufacturing Processes

Astronaut waste is an important aspect of the planning and execution of long-term crewed missions, especially to the Moon and Mars. However, as new technologies arise and mission planning evolves, the projected composition of the waste similarly evolves. This poses a problem for researchers who are investigating various approaches to mitigating crew waste, since the investigation of each new waste-mitigation technology typically uses a static waste composition that is based on a simulant developed at the time of the research; several such waste simulants have been developed over recent years. To mitigate the ‘moving target’ aspect of crew waste composition and use, researchers at NASA KSC have developed a computational tool wherein researchers can adjust the composition of the crew waste, as well as other important parameters such as crew size, mission duration, and waste mitigation method (e.g., incineration, compaction, jettison, etc.). The computational tool then returns important mission metrics such as waste-related mass reduction, power consumed, water produced or consumed, elemental mass balance, and available feedstock for in-space manufacturing (ISM) applications. This tool can then be used to adjust aspects of a waste model (e.g., removal of metal aluminum (Al) for ISM applications) and determine an associated set of metrics in order to inform mission planning.

Ray Pitts↗
NASA NTRSDate not supplied

PRIME ISS Ground Prototype

In Additive Manufacturing (AM) with metal powders, layers of material are deposited and fused to form metal 3D parts. However, in most cases, remnant powder still must be removed from interior cavities and channels to fully clean the part before use. Ground demonstrations such as ultrasonic cleaning have been proven to work during ground testing at MSFC and Florida State University. However, manufacturing in the low gravity environment of space introduces challenges to this powder removal. Therefore, if this concept could be demonstrated in microgravity, the ability to clean AM parts or contaminated parts can bring new advancements to in-space manufacturing (ISM). The goal of this work was to make significant progress on developing an ISS payload using the ultrasonic technology called Powder Removal in Microgravity Environments (PRIME). This would also create new opportunities for in-space manufacturing (ISM) and the additive manufacturing community to develop new standards and practices for powder removal and the cleaning of contaminated parts in space.

Microgravity↗
NASA NTRS2016

An X-Ray and Radio Study of the Varying Expansion Velocities in Tycho's Supernova Remnant

We present newly obtained X-ray and radio observations of Tycho's supernova remnant using Chandra and the Karl G. Jansky Very Large Array in 2015 and 2013/14, respectively. When combined with earlier epoch observations by these instruments, we now have time baselines for expansion measurements of the remnant of 12-15 years in the X-rays and 30 years in the radio. The remnant's large angular size allows for proper motion measurements at many locations around the periphery of the blast wave. Consistent with earlier measurements, we find a clear gradient in the expansion velocity of the remnant, despite its round shape. The proper motions on the western and southwestern sides of the remnant are about a factor of two higher than those in the east and northeast. We showed in an earlier work that this is related to an offset of the explosion site from the geometric center of the remnant due to a density gradient in the ISM, and using our refined measurements reported here, we find that this offset is approximately 23″ toward the northeast. An explosion center offset in such a circular remnant has implications for searches for progenitor companions in other remnants.

dust↗
NASA NTRS2021

A New Method for Simulating Photoprocesses in Astrochemical Models

We propose a new model for treating solid-phase photoprocesses in interstellar ice analogues. In this approach, photoionization and photoexcitation are included in more detail, and the production of electronically-excited (suprathermal) species is explic- itly considered. In addition, we have included non-thermal, non-diffusive chemistry to account for the low-temperature characteristic of cold cores. As an initial test of our method, we have simulated two previous experimental studies involving the UV irradiation of pure solid O2. In contrast to previous solid-state astrochemical model calculations which have used gas-phase photoabsorption cross-sections, we have em- ployed solid-state cross-sections in our calculations. This method allows the model to be tested using well-constrained experiments rather than poorly constrained gas-phase abundances in ISM regions. Our results indicate that inclusion of non-thermal reac- tions and suprathermal species allows for reproduction of low-temperature solid-phase photoprocessing that simulate interstellar ices within cold ( 10 K) dense cores such as TMC-1.

astrochemical modeling↗
NASA NTRS1999

The Heliosphere and Beyond

The concept of the heliosphere as a quasi-spherical cavity in the surrounding interstellar medium (ISM) has a history at least as long as that of an extended solar corona and solar wind.

heliosphere solar wind interstellar medium (ISM)↗
NASA NTRS2012

The Possible Interstellar Anion CH2CN-: Spectroscopic Constants, Vibrational Frequencies, and Other Considerations

The A 1B1 <-1A0 excitation into the dipole-bound state of the cyanomethyl anion (CH2CN􀀀) has been hypothesized as the carrier for one di use interstellar band. However, this particular molecular system has not been detected in the interstellar medium even though the related cyanomethyl radical and the isoelectronic ketenimine molecule have been found. In this study we are employing the use of proven quartic force elds and second-order vibrational perturbation theory to compute accurate spectroscopic constants and fundamental vibrational frequencies for ~X 1A0 CH2CN􀀀 in order to assist in laboratory studies and astronomical observations. Keywords: Astrochemistry, ISM: molecular anions, Quartic force elds, Rotational constants, Vibrational frequencies

Astrochemistry↗
NASA NTRS2020

Electronic spectroscopy of PAHs and PAH derivatives in supersonic jet

Polycyclic Aromatic Hydrocarbon (PAHs) molecules are attracting much attention in the astrophysical and astrochemical communities because of their ubiquitous presence in space due to their ability to survive in the harsh environmental conditions of the interstellar medium(ISM). The objective of this work is to provide gas phase, high-resolution spectroscopic data on the electronic and vibronic transitions of PAHs and their nitrogenated derivatives measured in astrophysically relevant conditions.

CRDS↗
NASA NTRS1982

Extended adiabatic blast waves and a model of the soft X-ray background

The suggestion has been made that much of the soft X-ray background observed in X-ray astronomy might arise from being inside a very large supernova blast wave propagating in the hot, low-density component of the interstellar (ISM) medium. An investigation is conducted to study this possibility. An analytic approximation is presented for the nonsimilar time evolution of the dynamic structure of an adiabatic blast wave generated by a point explosion in a homogeneous ambient medium. A scheme is provided for evaluating the electron-temperature distribution for the evolving structure, and a procedure is presented for following the state of a given fluid element through the evolving dynamical and thermal structures. The results of the investigation show that, if the solar system were located within a blast wave, the Wisconsin soft X-ray rocket payload would measure the B and C band count rates that it does measure, provided conditions correspond to the values calculated in the investigation.

Cox, D. P.↗
NASA NTRS1982

The interrelation of cosmic gamma-rays and interstellar gas in the range l:65-180 deg

New date on the distribution of molecular hydrogen in the first and second quadrants allow a detailed analysis of the relationship between the column density of gas (in all major forms) and the intensity of cosmic gamma-rays in the Galaxy. It is concluded that most of the features observed in the gamma-ray map can be explained in terms of cosmic-ray interactions with the gas in the ISM, with molecular hydrogen playing an important role. The cosmic-ray intensity in the important production regions appears to be roughly independent of galactocentric distance, R, for l:65-100 deg and to fall off slowly with R for l:100-180 deg.

Arnaud, K.↗
NASA NTRS1984

Pioneer 10 and Voyager observations of the interstellar medium in scattered emission of the He584 A and H Lya 1216 A lines

The combination of Pioneer photometric and Voyager spectrometric observations of EUV interstellar-interplanetary emissions in the region beyond 5 A was applied to a determination of atomic hydrogen and helium densities. These density estimates obtained from direct measurement of scattered radiation depend on absolute calibration of the instruments in the same way as other earlier determinations based on the same method. However, the spacecraft data were combined with daily full sun averages of the H Lyman 1216 A line obtained by the Solar Mesospheric Explorer satellite to obtain a measure of atomic hydrogen density independent of instrument absolute calibration. The method depends on observations of long and short term temporal variability of the solar line over a one year period, and the fact that the ISM is optically thick. The density estimates from preliminary work on these observations are H = 0.12 cu cm and H = .016 cu cm, giving a density ratio close to the cosmic abundance value in contrast to some earlier results indicating a depletion of atomic hydrogen. Estimates were obtained of galactic background emissions in the signals of both spacecraft.

Shemansky, D. E.↗
NASA NTRS1983

The inner radio structure of Centaurus A - Clues to the origin of the jet X-ray emission

VLA observations at 1.4 and 4.9 GHz of the jet and inner lobes of the nearby radio galaxy Centaurus A have been used to construct maps of total intensity and polarization at resolutions of 31 x 10 and 3.6 x 1.1 arcsec. Surface brightness and pressure distributions in the jet, combined with the apparent X-ray emission from the ISM of NGC 5128, indicate that it is thermally confined. A comparison of the radio structure and the optical galaxy shows that the jet in Cen A emerges nearly along the major axis of the elliptical stellar component that is parallel to the angular momentum vector of the dust lane. The outer radio structure bends toward the galaxy minor axis. Evidence is found for a common synchrotron radiation origin of the full spectrum jet emission.

Burns, J. O.↗
NASA NTRS1983

The kinematics and structure of N49

The present investigation of N49, which is located in the Large Magellanic Cloud (LMC), makes use of an analysis of optical emission-line profiles. Echelle spectrograph observations indicate the large-scale kinematic and structural properties of N49. It is found that this supernova remnant (SNR) is evolving in a clumpy interstellar medium (ISM), probably as many other remnants are. The very high resolution spectra of this remnant show three kinds of spectral feature, called broad bands, narrow bands, and spikes. It is shown that N49 can be regarded as the product of a supernova explosion in a heterogeneous interstellar medium. The heterogeneity is indicated in low-speed and high-speed systems of shocked material in N49.

Shull, P., Jr.↗
NASA NTRS1984

A far-infrared survey of the galactic center

The region within + or - 1.5 deg of the galactic center has been surveyed at a resolution of 1 arcmin between 40 and 250 microns. Forty-seven FIR sources were detected in the field, 38 of them spatially coincident with prominent radio-emitting regions. The 27 sources associated with H II regions have luminosities ranging from 500,000 to ten million solar luminosities, average infrared excesses of 16, and average dust-to-gas ratios of 0.002. They are located in a narrow band centered on Sgr A. Each FIR source appears to be powered by small numbers of early type O stars. The initial luminosity functions for these sources is best fitted by an exponential form with an e-folding luminosity of 2.3 million solar luminosities. The extended thermal emission of the region is consistent with a population of 30,000-50,000 ZAMS stars embedded in an ISM with a Lyman-continuum optical depth of 1-1.5.

Odenwald, S. F.↗