Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

The Effect of Annealing on the Properties of AW5754 Aluminum Alloy-AZ31B Magnesium Alloy Explosively Welded Bimetals

Explosive welding of AW5754 aluminum alloy to AZ31B magnesium alloy was performed. AW5754 was proposed as a flyer plate. A parallel setup was used during explosive welding. The annealing of AW5754/AZ31B composite plate at 250, 300 and 350 °C for 2, 3, 4 and 5 h was performed after explosive welding. Bimetals were characterized by regular wavy interface. Annealing resulted in the creation of intermetallic compounds (IMCs). The increase in the thickness of IMC interfacial layer was observed with increasing of annealing temperature and time. IMC layer of highest thickness was recorded after annealing at 350 °C for 5 h and averaged 67 µm. EDS analysis showed that the interfacial layer close to AW5754 alloy was formed by Al{sub 3}Mg{sub 2} IMC, and interfacial layer adjacent to the AZ31B alloy consisted of Mg{sub 17}Al{sub 12} IMC. Bright particles were spread at the AW5754-Al{sub 3}Mg{sub 2} IMC interface. Rise in the microhardness at the interface of produced bimetal was associated with work hardening. Microhardness values increased to 218 HV0.025 after annealing process due to IMCs present at the interface. Decrease in microhardness in locations close to the IMC interfacial layer was found after heat treatment due to recrystallization. The bimetal tensile strength reached 120 MPa. The annealing resulted in decrease in the bimetal tensile strength.

36 MATERIALS SCIENCE↗

Effects of Ag addition on solid–state interfacial reactions between Sn–Ag–Cu solder and Cu substrate

Low–Ag–content Sn–Ag–Cu (SAC) solders have attracted much recent attention in electronic packaging for their low cost. To reasonably reduce the Ag content in Pb–free solders, a deep understanding of the basic influence of Ag on the SAC solder/Cu substrate interfacial reaction is essential. Previous studies have discussed the influence of Ag on the interfacial intermetallic compound (IMC) thickness. However, because IMC growth is the joint result of multiple factors, such characterizations do not reveal the actual role of Ag. In this study, changes in interfacial IMCs after Ag introduction were systemically and quantitatively characterized in terms of coarsening behaviors, orientation evolution, and growth kinetics. The results show that Ag in the solder alloy affects the coarsening behavior, accelerates the orientation concentration, and inhibits the growth of interfacial IMCs during solid–state aging. The inhibition mechanism was quantitatively discussed considering the individual diffusion behaviors of Cu and Sn atoms, revealing that Ag inhibits interfacial IMC growth primarily by slowing the diffusion of Cu atoms through the interface. - Highlights: •Role of Ag in IMC formation during Sn–Ag–Cu soldering was investigated. •Ag affects coarsening, crystallographic orientation, and IMC growth. •Diffusion pathways of Sn and Cu are affected differently by Ag. •Ag slows Cu diffusion to inhibit IMC growth at solder/substrate interface.

36 MATERIALS SCIENCE↗

Ce{sub 11}Ge{sub 3.73(2)}In{sub 6.27}: Solid-state synthesis, crystal structure and site-preference

A novel intermetallic compound of Ce{sub 11}Ge{sub 3.73(2)}In{sub 6.27} has been synthesized through the high-temperature solid-state reaction using Nb-ampoules. A batch of well grown block-/short bar-shaped single-crystals has been obtained, and the crystal structure of the title compound has been characterized by single-crystal X-ray diffraction analyses. Ce{sub 11}Ge{sub 3.73(2)}In{sub 6.27} adopts the Ho{sub 11}Ge{sub 10}-type structure belonging to the tetragonal space group I4/mmm (Z=4, Pearson symbol tI84) with nine crystallographically unique atomic positions in the asymmetric unit. The lattice parameters are a=12.0163(1) Å and c=16.5396(2) Å. The overall crystal structure can simply be depicted as an assembly of three different types of co-facial cationic polyhedra centered by anions, which is further enclosed by the three-dimensional (3-D) cage-like anionic framework. The extra amount of In is observed in one of three isolated anionic sites resulting in introducing the Ge/In-mixed site at the Wyckoff 4e site. This unique site-preference of In substitution for Ge at the 4e site has been enlightened via the atomic size-aspect which was fully supported and rationalized by the site- and bond-energies analyses using tight-binding linear muffin-tin orbital (TB-LMTO) calculations. Energy-dispersive X-ray spectroscopy (EDS), density of states (DOS), crystal orbital Hamilton population (COHP), and electron localization function (ELF) analyses for the title compound are also presented. Magnetic susceptibility measurement proves that an antiferromagnetic ordering of Ce atoms at a low temperature with a paramagnetic Curie temperature of −23.2 K. - Graphical abstract: Reported is experimental and theoretical investigations for Ce{sub 11}Ge{sub 3.73(2)}In{sub 6.27}, which is the first reported example having the extra amounts of In substitution for Ge at one of three “isolated” anionic sites in the Ho{sub 11}Ge{sub 10}-type phase. The observed In site-preference toward the particular anionic site was rationalized via the atomic size-aspect supported by comprehensive analyses for the site-energies including the Wyckoff 4e and 8j sites. - Highlights: • Block or short-bar shaped single-crystals of Ce{sub 11}Ge{sub 3.73(2)}In{sub 6.27} were synthesized. • The first example of having the In/Ge mixture at the “isolated” anionic site. • The site-preference of In was rationalized by the site- and bond-energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anti-site mixing and magnetic properties of Fe 3 Co 3 Nb 2 studied via neutron powder diffraction

Here, we studied the crystal structure and magnetic properties of the rare-earth-free intermetallic compound Fe 3 Co 3 Nb 2 , which has recently been demonstrated to have potentially high magnetic anisotropy, using temperature-dependent neutron powder diffraction. Furthermore, the temperature dependence of the diffraction spectra reveals a magnetic transition between 300 and 400 K, in agreement with the magnetometry measurements. According to the structural refinement of the paramagnetic state and the substantial magnetic contribution to the diffuse scattering in the ferromagnetic state, the Fe/Co anti-site mixing is so strong that the site occupation for Fe and Co is almost random. The projection of the magnetic moments turned out to be non-zero along the c axis and in the a–b plane of Fe 3 Co 3 Nb 2 , most likely because of the exchange interactions between the randomly orientated nanograins in the samples. These findings suggest that future studies on the magnetism of Fe 3 Co 3 Nb 2 need to take the Fe/Co anti-site mixing into account, and the exchange interactions need to be suppressed to obtain large remanence and coercivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and mechanical properties of aluminium matrix composites reinforced by Al{sub 62}Cu{sub 25.5}Fe{sub 12.5} melt spun ribbon

Aluminium matrix composites containing 15, 30 and 50 vol.% of pulverized Al{sub 62}Cu{sub 25.5}Fe{sub 12.5} (in at.%) melt spun ribbons have been prepared by a vacuum hot pressing (T = 673 K, P = 600 MPa). The microstructure of the initial ribbon and the composites was investigated using X-ray, scanning and transmission electron microscopy. In the as-spun ribbon the quasicrystalline icosahedral phase (i-phase) coexisted with the cubic copper rich β-Al(Cu, Fe) intermetallic compound. The phase composition of Al-Cu-Fe particles changed after consolidation process and the i-phase transformed partially to the ω-Al{sub 70}Cu{sub 20}Fe{sub 10} phase. Additionally, the Θ-Al{sub 2}Cu phase formed at the α(Al)/Al-Cu-Fe particle interfaces. With an increase in volume fraction of the reinforcement the hardness of the composites increased up to HV = 180 for the highest amount of added particles. The ultimate compression strength of the same sample reached the value of 545 MPa. - Highlights: • Al and 15, 30, 50% of pulverized Al{sub 62}Cu{sub 25.5}Fe{sub 12.5} melt spun ribbon were consolidated. • The initial ribbon consisted of the icosahedral i-phase and copper rich β-Al(Cu, Fe). • The i-phase partially transforms to ω-Al{sub 7}Cu{sub 2}Fe phase in all composites. • Increase of microhardness and compressive strength with content of reinforcement • Ultimate compression strength 545 MPa for 50% of added particles.

36 MATERIALS SCIENCE↗

Joining of Ni-TiC FGM and Ni-Al Intermetallics by Centrifugal Combustion Synthesis

A centrifugal combustion synthesis (CCS) process has been investigated to join a Ni-Al intermetallic compound and a Ni-TiC cermet. The cermet, a tubular graphite mold, and a green compact of reactants consisting of Al, Ni and NiO were set in a centrifugal caster. When the combustion synthesis reaction was induced in the centrifugal force field, a synthesized molten Ni-Al alloy flowed into the graphite mold and joined to the cermet. The soundness of the joint interface depended on the volume percentage of TiC phase in the cermet. A lot of defects were formed near the interface between the Ni-TiC cermet and the cast Ni-Al alloy when the volume percentage of TiC was 50% or higher. For this kind of cermet system, using a functionally graded cermet such as Ni-10 vol.%TiC/Ni-25 vol.%TiC/Ni-50 vol.%TiC overcame this difficulty. The four-point bending strength of the joined specimen consisting of the three-layered FGM cermet and cast Ni-29 mol%Al alloy was 1010 MPa which is close to the result for a Ni-29 mol%Al alloy specimen.

36 MATERIALS SCIENCE↗

Physical properties and electronic structure of La 3 Co and La 3 Ni intermetallic superconductors

La 3 Co and La 3 Ni are reported superconductors with transition temperatures of 4.5 and 6 K, respectively. In this work, we reinvestigate the physical properties of these two intermetallic compounds with magnetic susceptibility χ, specific heat C p and electrical resistivity ρ measurements down to 1.9 K. Although bulk superconductivity is confirmed in La 3 Co, as observed previously, only a trace of it is found in La3Ni, indicating that the superconductivity in La 3 Ni originates from an impurity phase. Superconducting state parameters for La 3 Co, including lower and upper critical fields and the superconducting gap, are estimated. Results of the theoretical calculations of the electronic structure for both materials are also presented, and comparison of the Fermi level location in La 3 Co versus La 3 Ni explains its larger superconducting T c . A major discrepancy between band structure calculations and the experimentally measured Sommerfeld coefficient is found. The measured electronic density of states is about 2.5 times larger than the theoretical value for La 3 Co. This effect cannot be explained by the electron-phonon interaction alone. Renormalization of γ, as well as an ~T 2 behavior of the resistivity, suggests the presence of spin fluctuations in both systems.

36 MATERIALS SCIENCE↗

Exotic (anti)ferrogmagnetism in Single Crystals of Pr6ni2Si3

The ternary intermetallic compound, Pr{sub 6}Ni{sub 2}Si{sub 3}, is a member of a structure series of compounds based on a triangular structure where the number of Pr atoms in the prism cross section can be systematically varied. Pr{sub 6}Ni{sub 2}Si{sub 3} contains two distinct Pr lattice sites which result in complex interactions between the magnetic ions. Extensive measurements of specific heat and magnetization on single-crystal samples indicate that Pr{sub 6}Ni{sub 2}Si{sub 3} orders with both a ferromagnet and an antiferromagnet component, with ordering temperatures of 39.6 and {approx}32 K, respectively. The ferromagnetic component c axis is accompanied by a large hysteresis, and the antiferromagnetic component c axis is accompanied by a spin-flop-type transition. More detailed measurements, of the vector magnetization, indicate that the ferromagnetic and the antiferromagnetic order appear independent of each other. These results not only clarify the behavior of Pr{sub 6}Ni{sub 2}Si{sub 3} itself but also of the other members of the structure series, Pr{sub 5}Ni{sub 2}Si{sub 3} and Pr{sub 15}Ni{sub 7}Si{sub 10}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, Crystal Structures and Properties of the Zintl Phases Sr2ZnP2, Sr2ZnAs2, A2ZnSb2 and A2ZnBi2 (A = Sr and Eu)

The new intermetallic compounds Sr2ZnP2, Sr2 ZnAs2, A2ZnSb2 and A2ZnBi2 (A = Sr, Eu) have been synthesized from the corresponding elements through high-temperature reactions using the flux-growth method. Their structures have been established by singlecrystal and powder X-ray diffraction. In all cases, the X-ray diffraction patterns can be successfully indexed based on hexagonal cells in the space group P63/mmc (no. 194) with lattice parameters in the range a = 4.31 4.73 and c = 7.9 8.55 . The average structure can be described in the ZrBeSi type (Pearson symbol hP6; 3 unique positions) with defects on the zinc site structure refinements indicate that every second zinc position is vacant, i.e., their formula unit is AZn1 xPn with x = 0.5 (A = Sr, Eu; Pn = P, As, Sb, Bi). No stoichiometry breadth was observed, which could imply that a super-structure with a long-range order of the zinc vacancies is plausible and evidence for such was sought using electron diffraction. The results from these experiments, as well as magnetic susceptibility measurements and band structure calculations using the LMTO code are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure evolution and mechanical properties of Cu/Sn/Ag TLP-bonded joint during thermal aging

Highlights: • The thermal reliability of the Cu/Sn/Ag TLP-bonded joint was investigated through high-temperature storage. • A diffusion reaction occurred at the interface between Cu{sub 3}Sn and Ag{sub 3}Sn during thermal aging. • The mechanism of the Cu{sub 3}Sn/Ag{sub 3}Sn interfacial reaction was investigated from thermodynamics and kinetics. - Abstract: Low-temperature transient liquid phase (TLP) bonding is a promising joining technology for high-temperature electronic devices packaging. However, the effect of thermal aging on the joint microstructure and performance has been rarely studied so far. In this paper, the relationship between microstructural evolution and mechanical property was developed for the Cu/Sn/Ag TLP-bonded joint during 350 °C aging. Experimental results show that an interfacial reaction occurs between the intermetallic compounds (IMCs) of Cu{sub 3}Sn and Ag{sub 3}Sn, which induces that a great amount of Cu{sub 3}Sn particles or wedges embed into the Ag-Sn phase layer. The reaction process is controlled by a volume diffusion of Cu elements from the Cu substrate, and capable of promoting the transformation from Ag{sub 3}Sn into Ag(Sn) solid solution. Cu{sub 41}Sn{sub 11} phase can be formed at the expense of Cu{sub 3}Sn and Cu, of which transformation process is completely achieved after aging for 480 h, and the Cu(Sn) solid solution intimately contacts with the opposite Ag(Sn) solid solution in many areas after aging for 960 h. The joint mechanical property initially declines due to the formation of Cu{sub 41}Sn{sub 11} phase and Cu-Sn IMCs grain coarsening, and then increases because of the complete depletion of Cu{sub 3}Sn and substantial precipitation of Cu(Sn) solid solution. After aging for nearly 1000 h, the joint still maintains a high shear strength of >40 MPa, indicating an excellent thermal reliability.

36 MATERIALS SCIENCE↗

Structural and Morphological Features of TiNi-Based Powder Manufactured by the Method of Hybrid-Calcium Reduction

An investigation of the structural features and surface morphology of a PV-N55T45 TiNi-based powder manufactured by the method of hybrid-calcium reduction is performed. The TiNi intermetallic compound is found in a two-phase state – B2 and В19′, and the following secondary phases are revealed: Ti{sub 2}Ni, Ti{sub 4}Ni{sub 2}(О, N, С), TiNi{sub 3}, and Ti{sub 3}Ni{sub 4}. It is observed that TiNi-based powder has dual – compact and spongy – morphology. The compact powder particles consist of oval coarse grains of TiNi separated by a massive Ti{sub 2}Ni interlayer. In the spongy particles, in contrast to the compact ones, the TiNi-phase prevails in the form of a single conglomerate of fine grains measuring 10–20 μm. In the Ni-enriched regions of the TiNi matrix the B19′-martensite is observed in multiple structural-morphological variants. In the compact particles the martensite structure represents orthogonal twin plates having different orientations within one grain. In the spongy particles, there is a different type of the martensite structure with multiple crystals of the B19′-martensite with the pyramidal lath morphology. On the surface of certain particles there is terraced relief formed due to bulk diffusion of atoms, surface diffusion of adatoms, and their interaction with the substrate defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insights into the dominant factors of porous gold for CO oxidation

Three different porous Au catalysts that exhibit high catalytic activity for CO oxidation were prepared by the leaching of Al from an intermetallic compound, Al{sub 2}Au, with 10 wt. %-NaOH, HNO{sub 3}, or HCl aqueous solutions. The catalysts were investigated using Brunauer-Emmett-Teller measurements, synchrotron X-ray powder diffraction, hard X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy (TEM). Broad diffraction peaks generated during the leaching process correlated with high activity for all the porous Au catalysts. CO oxidation catalyzed by porous Au leached with NaOH and HNO{sub 3} is considered to be dominated by different mechanisms at low (< 320 K) and high (> 370 K) temperatures. Activity in the low-temperature region is mainly attributed to the perimeter interface between residual Al species (AlO{sub x}) and porous Au, whereas activity in the high-temperature region results from a high density of lattice defects such as twins and dislocations, which were evident from diffraction peak broadening and were observed with high-resolution TEM in the porous Au leached with NaOH. It is proposed that atoms located at lattice defects on the surfaces of porous Au are the active sites for catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Order-disorder transition and valence state of ytterbium in YbAu{sub x}Ga{sub 2-x} (0.26<=x<=1.31)

The intermetallic compounds YbAu{sub x}Ga{sub 2-x} (0.26<=x<=1.31) were synthesized by melting of elemental components and subsequent annealing. The crystal structure of YbAu{sub 1.04}Ga{sub 0.96} was investigated using single-crystal X-ray diffraction data: structure type TiNiSi, space group Pnma, a=7.1167(3) A, b=4.5019(3) A, c=7.7083(3) A, R{sub F}=0.028 for 27 variables and 441 reflections. At 600 deg. C this compound is described as partially substituted TiNiSi type and shows a homogeneity range around the equiatomic composition YbAu{sub x}Ga{sub 2-x} (0.94<=x<=1.19). For the gallium- (0.26<=x<=0.83) and gold-rich (1.21<=x<=1.31) regions, the KHg{sub 2} type of crystal structure (space group Imma) with mixed Au/Ga occupation is found. A temperature-driven phase transition for the composition YbAuGa from ordered TiNiSi to disordered KHg{sub 2} structure type is observed at 629 deg. C. Yb L{sub III} X-ray absorption spectra indicate an intermediate valence of +2.5 for Yb atoms in YbAuGa. For samples deviating from this composition a further reduced valence of Yb is observed. Magnetic susceptibility studies show a non-magnetic 4f{sup 14} ground state of Yb atoms with thermal fluctuations towards the 4f{sup 13} state. - Graphical abstract: Ordering of the crystal structure in the YbAu{sub x}Ga{sub 2-x} is accompanied by the change of valence of Yb atoms.

36 MATERIALS SCIENCE↗

Acquisition of Single Crystal Growth and Characterization Equipment

Final Report for DOE Grant No. DE-FG02-04ER46178 'Acquisition of Single Crystal Growth and Characterization Equipment'. There is growing concern in the condensed matter community that the need for quality crystal growth and materials preparation laboratories is not being met in the United States. It has been suggested that there are too many researchers performing measurements on too few materials. As a result, many user facilities are not being used optimally. The number of proficient crystal growers is too small. In addition, insufficient attention is being paid to the enterprise of finding new and interesting materials, which is the driving force behind much of condensed matter research and, ultimately, technology. While a detailed assessment of this situation is clearly needed, enough evidence of a problem already exists to compel a general consensus that the situation must be addressed promptly. This final report describes the work carried out during the last four years in our group, in which a state-of-the-art single crystal growth and characterization facility was established for the study of novel oxides and intermetallic compounds of rare earth, actinide and transition metal elements. Research emphasis is on the physics of superconducting (SC), magnetic, heavy fermion (HF), non-Fermi liquid (NFL) and other types of strongly correlated electron phenomena in bulk single crystals. Properties of these materials are being studied as a function of concentration of chemical constituents, temperature, pressure, and magnetic field, which provide information about the electronic, lattice, and magnetic excitations at the root of various strongly correlated electron phenomena. Most importantly, the facility makes possible the investigation of material properties that can only be achieved in high quality bulk single crystals, including magnetic and transport phenomena, studies of the effects of disorder, properties in the clean limit, and spectroscopic and scattering studies through efforts with numerous collaborators. These endeavors will assist the effort to explain various outstanding theoretical problems, such as order parameter symmetries and electron-pairing mechanisms in unconventional superconductors, the relationship between superconductivity and magnetic order in certain correlated electron systems, the role of disorder in non-Fermi liquid behavior and unconventional superconductivity, and the nature of interactions between localized and itinerant electrons in these materials. Understanding the mechanisms behind strongly correlated electron behavior has important technological implications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lanthanides in Metallic Nuclear Fuels: Their Behavior and Methods for Their Control

The thermodynamic and experimental basis is given for using dopant additives to bind lanthanides as intermetallic compounds in metallic nuclear fuels. Lanthanide fission products are a major factor in limiting the lifetime of the fuel, because they migrate to the fuel slug peripheral surface where they participate in fuel-cladding chemical interactions (FCCI) with the steel cladding. Lanthanide carryover in recycled metal fuels can accelerate FCCI, as recycled lanthanides would likely segregate from the fuel phase, putting the lanthanides in prompt contact with the cladding. In out-of-pile tests we examined the use of Pd for binding the lanthanides, with Pd selected because of its known metallurgical properties in fuel related systems and because of its known behavior in irradiated EBR-II fuels. Initial results confirmed that palladium may be expected to mitigate FCCI arising from lanthanides, and it has been recommended for in-pile tests. We also evaluated transport phenomena responsible for lanthanide migration, and identified liquid-like behaviors as being dominant. Liquid-like behaviors include transport with liquid metals, liquid metal solutions, and rapid surface transport of alloys/metals near their melting temperatures. The analysis led to establishing general criteria for selecting alternate dopant additives, and identifying Sn, Sb, and Te as alternates for further testing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Activation Energy for End-of-Life Solder Bond Degradation: Thermal Cycling of Field-Aged PV Modules

The longevity of solar photovoltaic modules depends on the durability and reliability of their components, one of which is the solder bonds in interconnect ribbons. The solder joints experience stresses from thermal cycling and constant elevated temperatures (40 °C-70 °C) in regular field operation leading to thermo-mechanical fatigue and intermetallic compound formation. To study the end-of-life wear-out mechanisms and to obtain activation energy of solder bond degradation, here two field-aged modules from Arizona-a 21-year-old Solarex MSX60 module (with Sn62Pb36Ag2 at the solder joints) and an 18-year-old Siemens M55 module (with Sn60Pb40 at the solder joints)-underwent 800 and 400 modified thermal cycles, respectively. Using three heating blankets, each module had three temperature zones maintained at 85, 95, and 105 °C during the 15-min hot dwell time of the thermal cycle. Cell-level series resistance data obtained from three temperature zones enabled the calculation of activation energy for solder bond degradation for the MSX60 and the M55 modules to be 0.12 eV and 0.35 eV, respectively. From each temperature zone in both modules, busbar-solder samples were obtained, imaged through SEM, and analyzed with energy-dispersive X-ray spectroscopy. In the MSX60 module with traces of Ag in the solder material, phase segregation and growth were primarily observed at high temperatures. For M55 modules without Ag in the solder material, major phase segregation was observed in all temperature zones. The IMC thickness for both modules increased with increasing module temperature. The beneficial effect of Ag in solder material on mitigating solder bond degradation is presented.

14 SOLAR ENERGY↗

Magnetocaloric properties of rapidly solidified Dy{sub 3}Co alloy ribbons

The magnetic and magnetocaloric (MC) properties of melt-spun ribbons of the Dy{sub 3}Co intermetallic compound were investigated. Samples were fabricated in an Ar environment using a homemade melt spinner system at a linear speed of the rotating copper wheel of 40 ms{sup −1}. X-ray diffraction analysis shows that ribbons crystallize into a single-phase with the Fe{sub 3}C-type orthorhombic crystal structure. The M(T) curve measured at 5 mT reveals the occurrence of a transition at 32 K from a first to a second antiferromagnetic (AFM) state and an AFM-to-paramagnetic transition at T{sub N} = 43 K. Furthermore, a metamagnetic transition is observed below T{sub N}, but the magnetization change ΔM is well below the one reported for bulk alloys. Below 12 K, large inverse MC effect and hysteresis losses are observed. This behavior is related to the metamagnetic transition. For a magnetic field change of 5 T (2 T) applied along the ribbon length, the produced ribbons show a peak value of the magnetic entropy change ΔS{sub M}{sup peak} of −6.5 (− 2.1) Jkg{sup −1}K{sup −1} occurring close to T{sub N} with a full-width at half-maximum δT{sub FWHM} of 53 (37) K, and refrigerant capacity RC = 364 (83) Jkg{sup −1} (estimated from the product |ΔS{sub M}{sup peak}| × δT{sub FWHM})

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation on microstructure characterization and property of rapidly solidified Mg-Zn-Ca-Ce-La alloys

Rapidly solidified (RS) Mg-Zn-Ca-Ce-La (wt.%) alloys have been produced via atomizing the alloy melt and subsequent splat-quenching on the water-cooled copper twin-rollers in the form of flakes. Microstructure characterization, phase compositions and thermal stability of the alloys have been systematically investigated. The results showed that with addition of RE (Ce and La) to the Mg-6Zn-5Ca alloy, the stable intermetallic compounds i.e. the Mg{sub x}Zn{sub y}RE{sub z} phase with a few Ca (about 3 at.%), shortened as the T Prime phase, were formed at the expense of the binary Mg-Zn and Ca{sub 2}Mg{sub 6}Zn{sub 3} phases, which was possibly beneficial to the enhanced thermal stability of the alloy. In the Mg-6Zn-5Ca-3Ce-0.5La alloy, the composition of the T Prime phase in the grain interior was different from that at the grain boundaries, in which the segregation of the La elements was found, and the atomic percentage ratio of Zn to Ce in the T Prime phase within the grains was close to 2. Moreover, the stable Mg{sub 2}Ca phases were detected around the T Prime phases at the grain boundaries in the alloy. - Research Highlights: Black-Right-Pointing-Pointer The phase constitution of RS Mg-6Zn-5Ca alloy can be improved by RE additions. Black-Right-Pointing-Pointer In the Mg-Zn-Ca-Ce-La alloys, the Mg{sub x}Zn{sub y}RE{sub z} phase with a few Ca (T Prime phase) is formed. Black-Right-Pointing-Pointer The formation of the T Prime phase leads to the loss of the Mg-Zn and Ca{sub 2}Mg{sub 6}Zn{sub 3} phases. Black-Right-Pointing-Pointer The composition of the T Prime phase differs from the grain interior to the grain boundary.

36 MATERIALS SCIENCE↗