Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Green function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Nonlinear adhesive behavior effects in a cracked orthotropic sheet stiffened by a semi-infinite orthotropic sheet

The stress-intensity factors are determined for a cracked orthotropic sheet adhesively bonded to an orthotropic stringer where the adhesive layer is modeled with a nonlinear stress-strain curve. By the use of Green's functions and the complex variable theory of orthotropic elasticity, a set of integral equations is obtained. The integral equations are replaced by an equivalent set of algebraic equations, which are solved to obtain the shear stress distribution in the adhesive layer, with which the crack-tip stress-intensity factors are found. When the adhesive was modeled with a nonlinear stress-strain curve, the peak shear stresses in the adhesive were considerably reduced in comparison to the solution for the linear elastic adhesive. This resulted in increases in the stress-intensity factors for the nonlinear adhesive solution compared to the linear adhesive solution. The nonlinear adhesive has no significant effect on the stress-intensity factor unless the near crack tip is beneath the stringer. It is assumed that the adhesive bond remains intact and it is predicted that onset of adhesive failure occurs at decreasing levels of applied stress as the crack propagates beneath the stringer.

Bigelow, C. A.↗
NASA NTRS1986

A mechanism for tectonic deformation on Venus

In the absence of identifiable physiographic features directly associated with plate tectonics, alternate mechanisms are sought for the intense tectonic deformation observed in radar images of Venus. One possible mechanism is direct coupling into an elastic lithosphere of the stresses associated with convective flow in the interior. Spectral Green's function solutions have been obtained for stresses in an elastic lithosphere overlying a Newtonian interior with an exponential depth dependence of viscosity, and a specified surface-density distribution driving the flow. At long wavelengths and for a rigid elastic/fluid boundary condition, horizontal normal stresses in the elastic lid are controlled by the vertical shear stress gradient and are directly proportional to the depth of the density disturbance in the underlying fluid. The depth and strength of density anomalies in the Venusian interior inferred by analyses of long wavelength gravity data suggest that stresses in excess of 100 MPa would be generated in a 10 km thick elastic lid unless a low viscosity channel occurring beneath the lid or a positive viscosity gradient uncouples the flow stresses. The great apparent depth of compensation of topographic features argues against this, however, thus supporting the importance of the coupling mechanism. If there is no elastic lid, stresses will also be very high near the surface, providing also that the viscosity gradient is negative.

Phillips, Roger J.↗
NASA NTRS1987

An Euler code calculation of blade-vortex interaction noise

An Euler code has been developed for calculation of noise radiation due to the interaction of a distributed vortex with a Joukowski airfoil. THe time-dependent incompressible flow field is first determined and then integrated to yield the resulting sound production through use of the elegant low-frequency Green's function approach. This code has several interesting numerical features involved in the vortex motion and in continuous satisfaction of the Kutta condition. In addition, it removes the limitations on Reynolds number and is much more efficient than an earlier Navier-Stokes code. Results indicate that the noise production is due to the deceleration and subsequent acceleration of the vortex as it approaches and passes the airfoil. Predicted acoustic levels and frequencies agree with measured data although a precise comparison would require the strength, size, and position of the incoming vortex to be known.

Hardin, J. C.↗
NASA NTRS1987

Displacements of the earth's surface due to atmospheric loading - Effects of gravity and baseline measurements

Atmospheric mass loads and deforms the earth's crust. By performing a convolution sum between daily, global barometric pressure data and mass loading Green's functions, the time dependent effects of atmospheric loading, including those associated with short-term synoptic storms, on surface point positioning measurements and surface gravity observations are estimated. The response for both an oceanless earth and an earth with an inverted barometer ocean is calculated. Load responses for near-coastal stations are significantly affected by the inclusion of an inverted barometer ocean. Peak-to-peak vertical displacements are frequently 15-20 mm with accompanying gravity perturbations of 3-6 micro Gal. Baseline changes can be as large as 20 mm or more. The perturbations are largest at higher latitudes and during winter months. These amplitudes are consistent with the results of Rabbel and Zschau (1985), who modeled synoptic pressure disturbances as Gaussian functions of radius around a central point. Deformation can be adequately computed using real pressure data from points within about 1000 km of the station. Knowledge of local pressure, alone, is not sufficient. Rabbel and Zschau's hypothesized corrections for these displacements, which use local pressure and the regionally averaged pressure, prove accurate at points well inland but are, in general, inadequate within a few hundred kilometers of the coast.

Van Dam, T. M.↗
NASA NTRS1987

Effective propagation constants in dense random media under effective medium approximation

The effective medium approximation is applied to study the effective propagation constants in a dense random medium. The dyadic Green's function is introduced to establish the effective medium approximation formalism for electromagnetic waves. The multiple scattering equations and the Lippmann-Schwinger equations for the transition operator are obtained in the configuration average form. The dispersion equations of multiple scattering is derived by using a standard method in quantum mechanics. To obtain an expression for the effective propagation constants the matrix elements of the configuration average dyadic transiton operator are calculated in momentum representation. Numerical illustations are carried out to demonstrate the difference in the effective propagation constants between the use of this approximation and the well-known quasi-crystalline approximation. A comparison is made with measured loss tangent in dry snow.

Zhu, P. Y.↗
NASA NTRS1987

Dynamic topography and gravity anomalies for fluid layers whose viscosity varies exponentially with depth

Adopting the formalism of Parsons and Daly (1983), analytical integral equations (Green's function integrals) are derived which relate gravity anomalies and dynamic boundary topography with temperature as a function of wavenumber for a fluid layer whose viscosity varies exponentially with depth. In the earth, such a viscosity profile may be found in the asthenosphere, where the large thermal gradient leads to exponential decrease of viscosity with depth, the effects of a pressure increase being small in comparison. It is shown that, when viscosity varies rapidly, topography kernels for both the surface and bottom boundaries (and hence the gravity kernel) are strongly affected at all wavelengths.

Revenaugh, Justin↗
NASA NTRS1987

Ring vortex/cylinder sound production revisited

The acoustic radiation produced by the passage of a vortex ring near a circular cylinder is calculated utilizing the Coriolis acceleration of the vortex as the source term and the low frequency Green's function approach. Necessary integrals are evaluated exactly via complex integration techniques. The results exhibit good agreement (on a Pascal basis) with experimental data. Of particular interest is the rotation of the directivity pattern during this transient encounter and the extreme sensitivity of the results to the distance at which the vortex passes by the cylinder.

Hardin, Jay C.↗
NASA NTRS1987

Analysis of the tapered slot antenna

A method for calculating the radiation pattern of end-fire tapered slot antennas with or without dielectric substrate is presented. The method involves a two-step procedure: (1) determine the field distribution of a traveling wave along the tapered slot, and (2) compute the radiation from this slot field by using the half-plane Green's function to account for termination effects. Acceptable estimates of the slot field usually can be obtained from a stepped approximation to the tapered geometry. The method has been verified by comparisons to measured patterns for various dielectric substrates and antenna dimensions. However, the effect of lateral truncation has not yet been successfully modeled. Experimental patterns showing this effect are presented.

Janaswamy, Ramakrishna↗
NASA NTRS1988

Mode-medium instability in an unstable resonator

The mode-medium instability of an active medium in an unstable resonator is investigated. The asymptotic solution due to Horwitz (1973), valid for large Fresnel numbers in an empty cavity, is modified by introducing gain/phase sheets in front of the resonator mirrors. The effect of medium coupling to the mode in the cavity is obtained by introducing a general time-independent Green's function in the Fox-Li (1961) formulation. The time evolution is then obtained by repeated integration of the beam propagation in the cavity. The diffractive terms are shown to grow rapidly at the expense of the geometric term. This instability responsible for the deterioration of the beam quality is studied numerically for a CO2 lasing system as an example.

Sung, C. C.↗
NASA NTRS1988

A nonlinear analysis of an equilibrium craze. I - Problem formulation and solution. II - Simulations of craze and crack growth

A numerical method is developed for the determinations of the equilibrium shape of a craze in an infinite elastic plane whose fibrils exhibit very general nonlinear force-displacement behavior. The problem formulation is based on the superposition of the relevant elasticity Green's function; the solution of the resulting nonlinear problem is obtained by using Picard's successive approximation scheme. The model is used to investigate the effect of nonlinear fibril behavior on the mechanics of craze and crack growth, and the results are compared with the Dugdale model.

Ungsuwarungsri, T.↗
NASA NTRS1989

On the structure of pressure fluctuations in simulated turbulent channel flow

Pressure fluctuations in a turbulent channel flow are investigated by analyzing a database obtained from a direct numerical simulation. Detailed statistics associated with the pressure fluctuations are presented. Characteristics associated with the rapid (linear) and slow (nonlinear) pressure are discussed. It is found that the slow pressure fluctuations are larger than the rapid pressure fluctuations throughout the channel except very near the wall, where they are about the same magnitude. This is contrary to the common belief that the nonlinear source terms are negligible compared to the linear source terms. Probability density distributions, power spectra, and two-point correlations are examined to reveal the characteristics of the pressure fluctuations. The global dependence of the pressure fluctuations and pressure-strain correlations are also examined by evaluating the integral associated with Green's function representations of them. In the wall region where the pressure-strain terms are large, most contributions to the pressure-strain terms are from the wall region (i.e., local), whereas away from the wall where the pressure-strain terms are small, contributions are global. Structures of instantaneous pressure and pressure gradients at the wall and the corresponding vorticity field are examined.

Kim, John↗
NASA NTRS1989

Nonlinear mesomechanics of composites with periodic microstructure

This work is concerned with modeling the mechanical deformation or constitutive behavior of composites comprised of a periodic microstructure under small displacement conditions at elevated temperature. A mesomechanics approach is adopted which relates the microimechanical behavior of the heterogeneous composite with its in-service macroscopic behavior. Two different methods, one based on a Fourier series approach and the other on a Green's function approach, are used in modeling the micromechanical behavior of the composite material. Although the constitutive formulations are based on a micromechanical approach, it should be stressed that the resulting equations are volume averaged to produce overall effective constitutive relations which relate the bulk, volume averaged, stress increment to the bulk, volume averaged, strain increment. As such, they are macromodels which can be used directly in nonlinear finite element programs such as MARC, ANSYS and ABAQUS or in boundary element programs such as BEST3D. In developing the volume averaged or efective macromodels from the micromechanical models, both approaches will require the evaluation of volume integrals containing the spatially varying strain distributions throughout the composite material. By assuming that the strain distributions are spatially constant within each constituent phase-or within a given subvolume within each constituent phase-of the composite material, the volume integrals can be obtained in closed form. This simplified micromodel can then be volume averaged to obtain an effective macromodel suitable for use in the MARC, ANSYS and ABAQUS nonlinear finite element programs via user constitutive subroutines such as HYPELA and CMUSER. This effective macromodel can be used in a nonlinear finite element structural analysis to obtain the strain-temperature history at those points in the structure where thermomechanical cracking and damage are expected to occur, the so called damage critical points of the structure.

Walker, Kevin P.↗
NASA NTRS1989

Radial deformation of the earth by oceanic tidal loading

A high-degree spherical harmonic series is used to compute the radial deformation of the Earth by oceanic tidal loading. By exploiting fast numerical transforms, this approach is found to be much more efficient, but no less accurate, than the traditional Green's function approach. The method is used to derive an atlas of load tide maps for 10 constitutents of the NSWC ocean tide model.

Ray, R. D.↗
NASA NTRS1988

The stress field in an edge cracked plate in antiplane deformation

The antiplane strain problem of an edge cracked elastic plate subjected to a surface displacement load is solved, and the surface line loads are obtained using conformal mapping techniques. Results are presented for the yield, stress, strain and displacement distributions, and stress intensity factors in the plate. A superposition technique and Green's functions are used to determine the strain field on the upper plate surface due to arbitrarily applied tensile stress on the lower plate surface.

Li, V. C.↗
NASA NTRS1989

Theoretical models for polarimetric microwave remote sensing of earth terrain

Using the two-layer anisotropic random medium, a mathematically rigorous, fully polarimetric model is developed to compute the Mueller and covariance matrices in the backscattering direction for various kinds of earth terrain. The electric field is first written in the form of an integral equation involving the unperturbed dyadic Green's function in the absence of the permittivity fluctuations. The integral equation is then solved by an iterative series known as the Born series. With only the first term of the series, which physically describes a single scattering process, the fully polarimetric backscattering coefficients are derived. Four different kinds of upgoing and downgoing waves exist due to the excitation of both ordinary and extraordinary waves in the anisotropic random medium. An averaging scheme over the azimuthal direction is used to simulate the effects on the radar backscattering due to the azimuthal randomness in the growth direction of leaves in tree and grass fields.

Borgeaud, M.↗
NASA NTRS1989

The Helmholtz-Kirchhoff integral relation as a framework for developing algorithms for sound propagation through inhomogeneous moving media

Transient sound propagation in an inhomogeneous moving medium is considered. For circumstances in which the medium is slowly varying over distances of a wavelength but possibly varying substantially over the propagation distance, a derivation is given of a new wave equation, which implicitly allows for diffraction and scattering and which also is consistent with earlier geometrical acoustics formulations. This wave equation is used as a starting point to derive a version of the Helmholtz-Kirchhoff integral relation that applies to inhomogeneous moving medium. It is suggested that a good approximation to the Green's function that appears in this relation is that derived from geometrical acoustics, the approximation becoming progressively better the shorter the distance between surfaces in the computation. It should also be at least as good as conventional ray acoustics, but can account for diffraction effects, such as at caustics.

Pierce, Allan D.↗
NASA NTRS1990

A finite element-boundary integral formulation for scattering by three-dimensional cavity-backed apertures

A numerical technique is proposed for the electromagnetic characterization of the scattering by a three-dimensional cavity-backed aperture in an infinite ground plane. The technique combines the finite element and boundary integral methods to formulate a system of equations for the solution of the aperture fields and those inside the cavity. Specifically, the finite element method is employed to formulate the fields in the cavity region and the boundary integral approach is used in conjunction with the equivalence principle to represent the fields above the ground plane. Unlike traditional approaches, the proposed technique does not require knowledge of the cavity's Green's function and is, therefore, applicable to arbitrary shape depressions and material fillings. Furthermore, the proposed formulation leads to a system having a partly full and partly sparse as well as symmetric and banded matrix which can be solved efficiently using special algorithms.

Jin, Jian-Ming↗
NASA NTRS1989

On the structure of pressure fluctuations in simulated turbulent channel flow

Pressure fluctuations in a turbulent channel flow are investigated by analyzing a database obtained from a direct numerical simulation. Detailed statistics associated with the pressure fluctuations are presented. Characteristics associated with the rapid (linear) and slow (nonlinear) pressure are discussed. It is found that the slow pressure fluctuations are larger than the rapid pressure fluctuations throughout the channel except very near the wall, where they are about the same magnitude. This is contrary to the common belief that the nonlinear source terms are negligible compared to the linear source terms. Probability density distributions, power spectra, and two-point correlations are examined to reveal the characteristics of the pressure fluctuations. The global dependence of the pressure fluctuations and pressure-strain correlations are also examined by evaluating the integral associated with Green's function representations of them. In the wall region where the pressure-strain terms are large, most contributions to the pressure-strain terms are from the wall region (i.e., local), whereas away from the wall where the pressure-strain terms are small, contributions are global. Structures of instantaneous pressure and pressure gradients at the wall and the corresponding vorticity field are examined.

Kim, John↗