Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRINDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Wind turbine blade material in the United States: Quantities, costs, and end-of-life options

Wind energy has experienced enormous growth in the past few decades; as a result, there are thousands of wind turbines around the world that will reach the end of their design lifetimes in the coming years. Much of the material in those turbines can be recycled using conventional processes, but the composite material that is the main component of the blades is more challenging to recycle. In the United States, turbine blades may be disposed of in landfills, adding a new solid waste stream to the material already being landfilled. This paper presents a spatially resolved estimate of the mass and volume of wind turbine blade waste in each state by 2050 and compares these amounts to estimates of the remaining landfill capacity by state. In this work, we estimate costs for each stage of the disposal process to indicate cost levels for alternatives. Assuming a 20-year turbine lifetime, the cumulative blade waste in 2050 is approximately 2.2 million tons. This value represents approximately 1% of remaining landfill capacity by volume, or 0.2% by mass. We also find that the current cost of disposing of blades in large segments or through grinding is relatively low in comparison to the overall life-cycle cost of energy. Based on these findings, landfill space constraints and disposal costs appear unlikely to motivate a change in waste handling strategies under current policy conditions. Instead, more profound shifts in recycling technologies, blade materials, or policy may be needed to move towards a circular economy for wind turbine blades.

17 WIND ENERGY↗

Mechanical formation of micro- and nano-plastic materials for environmental studies in agricultural ecosystems

Release of microplastics (MPs) and nanoplastics (NPs) into agricultural fields is of great concern due to their reported ecotoxicity to organisms that provide beneficial service to the soil such as earthworms, and the potential ability of MPs and NPs to enter the food chain. Most fundamental studies of the fate and transport of plastic particulates in terrestrial environments employ idealized MP materials as models, such as monodisperse polystyrene spheres. In contrast, plastics that reside in agricultural soils consist of polydisperse fragments resulting from degraded films employed in agriculture. There is a need for more representative materials in fundamental studies of the fate, transport, and ecotoxicity of MPs and NPs in soil ecosystems. The aim of this study was therefore to develop a procedure to produce MPs and NPs from agricultural plastics (a mulch film prepared biodegradable polymer polybutyrate adipate-co-terephthalate (PBAT) and low-density PE [LDPE]), and to characterize the resultant materials. Soaking of PBAT films under cryogenic conditions promoted embrittlement, similar to what occurs through environmental weathering. LDPE and cryogenically-treated PBAT underwent mechanical milling followed by sieve fractionation into MP fractions of 840 μm, 250 μm, 106 μm, and 45 μm. The 106 μm fraction was subjected to wet grinding to produce NPs of average particle size 366.0 nm and 389.4 nm for PBAT and LDPE, respectively. A two-parameter Weibull model described the MPs' particle size distributions, while NPs possessed bimodal distributions. Size reduction did not produce any changes in the chemical properties of the plastics, except for slight depolymerization and an increase of crystallinity resulting from cryogenic treatment. This study implies that MPs form from cutting and high-impact mechanical degradation as would occur during the tillage into soil, and that NPs form from the MP fragments in regions of relative weakness that possess lower molecular weight polymers and crystallinity.

33 nanoplastics↗

The inclusion of uncertainty in circularity transition modeling: A case study on wind turbine blade end-of-life management

The transition to a more circular economy (CE) is complex and hard to predict, including in sustainable energy technologies. Many sources of uncertainty make it challenging to model CE scenarios and their potential benefits. As an example, the high variability in costs and revenues of different recycling options makes future wind turbine blade recycling highly uncertain. To better understand this challenge, the circular economy, life cycle assessment and visualization (CELAVI) framework - a discrete event simulation and life cycle assessment framework - is modified to incorporate uncertainty analysis capabilities. Moreover, a 3-step procedure that covers different aspects of uncertainty in CE studies and includes a Monte-Carlo analysis is proposed. The procedure is tested in a case study on wind turbine blade recycling using CELAVI. Results highlight that grinding and landfilling costs are the most influential parameters for wind power circularity. The model's output coefficients of variation (when input parameter uncertainties are propagated) are between 92% and 384% depending on the indicator. The approach developed in this study may help researchers and decision-makers who study circularity prioritize their data collection effort. Finally, our method contributes to a mounting yet critical body of research: the measurement of uncertainty in circularity transitions.

17 WIND ENERGY↗

Topographic and nanomechanical mapping of plutonium surfaces

Atomic force microscopy of gallium-stabilized δ-phase plutonium coupons has been used to map their topography and qualitative mechanical character, including Derjaguin-Muller-Toporov modulus, adhesion, deformation, and dissipation. Initial topographical results demonstrate that the plutonium surface is considerably rough and heterogeneous. Qualitative nanomechanical mapping revealed distinct striation patterns that are not observed in the topography images. Further investigation of the striations in the nanomechanical modes of imaging suggest that they are not measurement artifacts, or plutonium specific features. Similar investigations of stainless steel surfaces established a strong correlation between the mechanical working of the surface (i.e. cutting and grinding) and the appearance of the striations. Reimaging of the plutonium surface after moderate oxidation occurring within an inert Ar atmosphere (~1 ppm O 2 ) over the course of 13 months revealed a diminished striation pattern. It is suggested that surface stress/strain induced by the mechanical working of the metal surfaces results in the patterns of variable modulus, adhesion, deformation, and dissipation, and that these patterns are affected by the chemical changes and aging of the plutonium surface.

36 MATERIALS SCIENCE↗

Soap production: A green prospective

Highlights: • Reducing the amount of different types of municipal waste. •Recycling waste to obtain a useful green soap, which is good quality and cheap. • Inspiring community projects meant to convey recycling and ecological approach. • Contributing to families’ economy and stimulating the use of healthier products. - Abstract: A green prospective based on the reuse of waste materials such as almond shells, orange peel and used cooking oil to manufacture soap is presented. In Portugal, thousands of tons of waste are generated from used cooking oil and production of nut shells’ residues is growing every year. In addition, the high consumption of citrus fruits, oranges in particular, generates large amounts of citrus peel. Therefore, it is necessary to diversify reuse mechanisms of these wastes, in order to make them back into raw materials. Complying with this trend, this work was carried out by processing and grinding almond shells, treating used oil, processing orange peels and extracting limonene, formulating and producing soap, and performing an acceptance study of the final product. Results validated a high potential of the idea in the field of environmental education, so it can be replicated in practical classes. It can also be useful for waste management, and it can support the development of community projects on an ecological approach.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Tailored glycolysis of Nylon 6 to enable upcycling into high-strength adhesives

Nylon is a high-strength polyamide widely used in automotive, textiles, packaging, etc. However, its durability makes nylon waste difficult to manage, with recycling limited to mechanical grinding to make fillers. Here, we report a catalytic glycolysis approach to deconstruct Nylon 6 into controlled-length oligomers, enabling upcycling into value-added materials. A low-molecular-weight oligomer (M n = 1.8 kg/mol) was repolymerized with diepoxy-terminated poly(bisphenol A-co-epichlorohydrin) via mechanochemistry to create a high-performance adhesive. This copolymer achieves lap shear strengths over 22 MPa on steel and bonds steel to carbon fiber composites, nearly tripling the performance of commercial adhesives even at 90°C. Thermomechanical analyses show that the adhesive retains thermal stability similar to nylon 6 but melts at lower temperatures, allowing easier processing. The material can be reprocessed and reused without significant performance loss. This study demonstrates a strategy to convert nylon 6 waste into valuable materials, offering a sustainable path for difficult-to-recycle plastics.

Nylon waste↗

Nano-Scale Fission Product Phases in an Irradiated U-7Mo Alloy Nuclear Fuel

Irradiated nuclear fuel is a very difficult material to characterize. Due to the large radiation fields associated with these materials, they are hard to handle and typically have to be contained in large hot cells. Even the equipment used for performing characterization is housed in hot cells or shielded glove boxes. The result is not only a limitation in the techniques that can be employed for characterization, but also a limitation in the size of features that can be resolved The most standard characterization techniques include light optical metallography (WM), scanning electron microscopy (SEM), and electron probe microanalysis (EPMA). These techniques are applied to samples that are typically prepared using grinding and polishing approaches that will always generate some mechanical damage on the sample surface. As a result, when performing SEM analysis, for example, the analysis is limited by the quality of the sample surface that can be prepared. However, a new approach for characterizing irradiated nuclear fuel has recently been developed at the Idaho National Laboratory (INL) in Idaho Falls, Idaho. It allows for a dramatic improvement in the quality of characterization that can be performed when using an instrument like an SEM. This new approach uses a dual-beam scanning microscope, where one of the beams isa focused ion beam (FIB), which can be used to generate specimens of irradiated fuel (-10µm x 10µm) for microstructural characterization, and the other beam is the electron beam of an SEM. One significant benefit of this approach is that the specimen surface being characterized has received much less damage (and smearing) than is caused by the more traditional approaches, which enables the imaging of nanometer­ sized microstructural features in the SEM. The process details are for an irradiated low-enriched uranium (LEU) U-Mo alloy fuel Another type of irradiated fuel that has been characterized using this technique is a mixed oxide fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis

The mechanical alloying process is a promising method for synthesizing electrode materials for batteries owing to its benefits such as the ability to produce nanostructured, high-performing electrode alloys, no adverse effects on the solid electrolyte for solid-state batteries, stable production of thick electrodes, simple processing steps, and low processing costs. It is gaining intensive attention in the battery industry as one of the best methods to replace the conventional wet-slurry-solvent method, and its application is rapidly increasing these days. However, the operation is currently conducted purely based on trial-and-error methods without fully utilizing the features of its functions. Here, this may be attributed to a lack of understanding of the effect of operating parameters on the alloying process and final products. Surprisingly, there is a scarcity of the literature conducting fundamental research to comprehend the underlying physics of the entire mechanical alloying process, resulting in a significant knowledge gap. To address this knowledge gap, extensive research was conducted. The existing literature on mechanical alloying was reviewed to comprehend the current state of understanding and to discuss the direction for future research. Mathematical expressions were developed to create physics-based models capable of capturing the entire mechanical alloying process, including milling kinetics and defect-enhanced phase evolution. These methods were then applied to investigate the impact of operating parameters such as milling frequency, initial mole ratio of the alloyed materials, density of grinding balls, and energy required for the powders to become amorphous (i.e., the amorphization energy threshold). This research aimed not only to comprehend the direct effects of these operating parameters but also to unveil the physics underlying the ball-milling process. The results of our study can serve as crucial information for the battery industry in designing or operating the ball-milling process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Incorporating Rich Mesoporosity into a Ceria-Based Catalyst via Mechanochemistry

Ceria-based materials possessing mesoporous structures afford higher activity than the corresponding bulk materials in CO oxidation and other catalytic applications, because of the wide pore channel and high surface area. The development of a direct, template-free, and scalable technology for directing porosity inside ceriabased materials is highly welcome. Here in this paper, a family of mesoporous transition-metaldoped ceria catalysts with specific surface areas up to 122 m 2 g -1 is constructed by mechanochemical grinding. No templates, additives, or solvents are needed in this process, while the mechanochemistry-mediated restructuring and the decomposing of the organic group led to plentiful mesopores. Interestingly, the copper species are evenly dispersed in the ceria matrix at the atomic scale, as observed in high resolution scanning transmission electron microscopy in high angle annular dark field. The copper-doped ceria materials show good activity in the CO oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Techno-economic Analysis of Metal–Organic Frameworks for Hydrogen and Natural Gas Storage

A techno-economic analysis was conducted for metal-organic framework (MOF) adsorbents, which are promising candidates for light-duty vehicle onboard natural gas and hydrogen storage. The goal of this analysis was to understand cost drivers for large-scale (2.5 Mkg/year) MOF synthesis and to identify potential pathways to achieving a production cost of less than $\$10$/kg MOF. Four MOFs were analyzed with four different metal centers and three different linkers: Ni 2 (dobdc) (dobdc 4– = 2,5-dioxido-1,4-benzenedicarboxylate; Ni-MOF-74), Mg 2 (dobdc; Mg-MOF-74), Zn 4 O(bdc) 3 (bdc 2– = 1,4-benzenedicarboxylate; MOF-5), and Cu 3 (btc) 2 (btc 3– = 1,3,5-benzenetricarboxylate; HKUST-1). Baseline costs are projected to range from $\$35$/kg to $\$71$/kg predicated on organic solvent (solvothermal) syntheses using an engineering scale-up of laboratory demonstrated synthesis procedures and conditions. Two alternative processes were analyzed to evaluate the cost impact of reducing solvent usage: liquid assisted grinding (LAG) and aqueous synthesis. Cost projections from these alternative synthesis approaches range from $\$13$/kg to $\$36$/kg (representing 34%-83% reductions), demonstrating the large impact of solvent on the baseline analysis. Lastly, sensitivity studies were conducted to identify additional opportunities for achieving MOF production costs of less than $\$10$/kg.

08 HYDROGEN↗

Effect of Pre-reaction Ball Milling on Kinetics of Lanthanum Phosphate Roasting with Sodium Carbonate

To design economic roasting processes for the recovery of rare earth phosphates from coal-derived feedstocks, it is convenient to study model systems of rare earth phosphate plus a reactant. In this work, the kinetics of the high-temperature roasting of lanthanum phosphate with sodium carbonate were studied. It is typically necessary to heat the reaction mixture above the melting point of Na 2 CO 3 (851 °C) to observe appreciable reaction to form La 2 O 3 . Furthermore, grinding the reactants reduces the necessary temperature to as low as 625 °C. It is believed that this increase in reactivity occurs because the ball milling process reduces the reactant particle size in addition to ensuring that the reaction mixture is thoroughly mixed. XRD hot stage results suggest a two-reaction mechanism is the route by which La 2 O 3 is produced from the ball milled sample upon reaction. Apparent activation energy and Arrhenius prefactor for each reaction were determined from TGA experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical-Induced Slippage in Bulk WSe 2

Layered transition metal dichalcogenides (TMDs) are the focus of intense research owing to their semiconducting properties and applications in many fields of research. In addition to intercalation and exfoliation, physical strain modulation has been reported as a way to mechanically-induce the slippage of layers and influence the properties of TMDs. Here, we report the chemically-induced slippage of layers in bulk tungsten diselenide (WSe 2 ). Powder X-ray diffraction, Raman spectroscopy, electron microscopy, and thermal analysis suggest that slippage is easily achieved by grinding in the presence of common solvents. Chemically-induced slippage of TMDs may represent an intermediate step leading to the exfoliation of these materials. We anticipate that chemical slippage will widen the synthetic utility and advance our understanding of the mechanical and optoelectronic properties of layered materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preserving Aryl Ether Linkages and Higher Yields of Isolated Lignin through Biomass Fibrillation

Ball milling is used for size reduction of biomass for isolating lignin. However, it is known that it can lead to some structural alteration of lignin. Fibrillation using ultrafriction grinding is a newer size reduction technology which was applied to poplar for isolating cellulolytic enzyme lignin. Compositional analysis of poplar, enzymatic hydrolysis yield, water retention value, lignin yield, lignin structural characterization, and lignin molecular weight analysis were carried out to compare lignin isolated from fibrillated and ball milled poplar. By using fibrillation instead of planetary ball milling for size reduction of poplar, higher β-O-4' linkage content, lignin yield, and molecular weight were obtained. Replacing ball milling with fibrillation for size reduction allows recovery of lignin whose structure is closer to that of lignin in biomass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of the combustion reactivity of TGA and drop tube furnace chars from a bituminous coal

This paper compares the reactivity of chars generated in a drop tube furnace (DTF) to those from TGA. The implications of devolatilization temperature, heating rate and residence time are considered. For the smaller particle size ranges of the bituminous coal investigated (ATC), optimized devolatilization procedures were used to generate corresponding TGA burnout rates between the two char types. However, with fractions of >75 {mu}m, the DTF chars showed an increased burnout propensity when moving from combustion regime II to combustion regime III. Scanning electron microscope (SEM) images and internal surface areas indicate that this is because of incompatible char morphologies. Thus, while chars produced under the conditions of TGA pyrolysis strongly resemble raw coal and display an undeveloped pore network; the DTF chars are highly porous, extensively swollen and possess considerably larger internal surface areas. Subsequently, char burnout variability was quantified, with the reactivity distribution for the DTF samples found to be up to an order of magnitude more significant than for the TGA chars. This is attributed to a fluctuating devolatilization environment on the DTF. Finally, a TGA study observed a robust particle size based compensation effect for the TGA chars, with the relative reaction rates and activation energies demonstrating the presence of internal diffusion control. However this phenomenon was partly alleviated for the DTF chars, since their higher porosities reduce mass transfer restrictions. Moreover, it should be realized that DTF char fractions of <38 {mu}m, including those required to ensure true intrinsic control under the investigated burnout conditions, cannot be produced directly. This is because of bridging and sloughing in the DTF's screw-feeder. Instead, such samples must be created by grinding larger particles, which destroys the char's existing porosity. 60 refs., 9 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Mechanochemical Solid Form Screening of Zeolitic Imidazolate Frameworks Using Structure-Directing Liquid Additives

We demonstrate a systematic application of the mechanochemical liquid-assisted grinding (LAG) methodology to screen for forms of zinc imidazolate (ZnIm 2 ), of fundamental importance as the simplest member of the zeolitic imidazolate framework materials family. The exploration of 45 different liquid additives, selected based on their molecular structure and physicochemical properties has resulted in eight different ZnIm 2 topological forms, appearing in 13 crystallographically distinct solid forms (including two previously unknown forms of the crb (BCT) topology), amorphous phases, and the interrupted moc-Zn 4 Im 8 HIm. All prepared topological forms were also explored computationally, using dispersion-corrected periodic density functional theory (DFT) calculations, enabling the rationalization of screening outcomes, and setting the stage for future prediction of additive-directed metal–organic framework (MOF) synthesis. This first systematic exploration of LAG in screening for three-dimensional MOFs demonstrates the potential of the liquid additive to not only accelerate materials synthesis, but also to direct it toward topologically different MOFs. The discovery of novel forms of a material that already exhibits at least 21 crystallographically and functionally different forms provides a strong testimony on the power of mechanochemistry in metal–organic materials discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-Dimensional Halide Perovskites Incorporating Straight Chain Symmetric Diammonium Ions, (NH 3 C m H 2 m NH 3 )(CH 3 NH 3 ) n -1 Pb n I 3 n +1 ( m = 4–9; n = 1–4)

We report that low-dimensional halide perovskites have recently attracted intense interest as alternatives to the three-dimensional (3D) perovskites because of their greater tunability and higher environmental stability. Herein, we present the new homologous 2D series (NH 3 C m H 2m NH 3 )(CH 3 NH 3 ) n-1 Pb n I 3n+1 (m = 4–9; n = 1–4), where m represents the carbon-chain number and n equals layer-thickness number. Multilayer (n > 1) 2D perovskites incorporating diammonium cations were successfully synthesized by the solid-state grinding method for m = 4 and 6 and by the solution method for m = 7–9. Structural characterization by single-crystal X-ray diffraction for the m = 8 and m = 9 series (n = 1–4) reveals that these compounds adopt the Cc space group for even n members and Pc for odd n members. The optical bandgaps are 2.15 eV for two-layer (n = 2), 2.01 eV for three-layer (n = 3), and 1.90 eV for four-layer (n = 4). The materials exhibit excellent solution processability, and casting thin-films of the n = 3 members was successfully accomplished. The films show a clear tendency for the higher-m members to have preferred orientation on the glass substrate, with m = 8 exhibiting almost perfect vertical layer orientation and m = 9 displaying both vertical and parallel layer orientation, as confirmed by grazing-incidence wide-angle X-ray scattering (GIWAXS) measurements. Lastly, the vertical layer orientation for the (NH 3 C 8 H 16 NH 3 )(CH 3 NH 3 ) 2 Pb 3 I 10 member results in the best thermal, light, and air stability within this series, thus showing excellent potential for solar cell applications.

36 MATERIALS SCIENCE↗

Tuning metal-support interactions in nickel–zeolite catalysts leads to enhanced stability during dry reforming of methane

Ni-based catalysts are highly reactive for dry reforming of methane (DRM) but they are prone to rapid deactivation due to sintering and/or coking. In this study, we present a straightforward approach for anchoring dispersed Ni sites with strengthened metal-support interactions, which leads to Ni active sites embedded in dealuminated Beta zeolite with superior stability and rates for DRM. The process involves solid-state grinding of dealuminated Beta zeolites and nickel nitrate, followed by calcination under finely controlled gas flow conditions. By combining in situ X-ray absorption spectroscopy and ab initio simulations, it is elucidated that the efficient removal of byproducts during catalyst synthesis is conducted to strengthen Ni–Si interactions that suppress coking and sintering after 100 h of time-on-stream. Transient isotopic kinetic experiments shed light on the differences in intrinsic turnover frequency of Ni species and explain performance trends. This work constructs a fundamental understanding regarding the implication of facile synthesis protocols on metal-support interaction in zeolite-supported Ni sites, and it lays the needed foundations on how these interactions can be tuned for outstanding DRM performance.

36 MATERIALS SCIENCE↗

Semi-supervised machine-learning classification of materials synthesis procedures

Digitizing large collections of scientific literature can enable new informatics approaches for scientific analysis and meta-analysis. However, most content in the scientific literature is locked-up in written natural language, which is difficult to parse into databases using explicitly hard-coded classification rules. In this work, we demonstrate a semi-supervised machine-learning method to classify inorganic materials synthesis procedures from written natural language. Without any human input, latent Dirichlet allocation can cluster keywords into topics corresponding to specific experimental materials synthesis steps, such as “grinding” and “heating”, “dissolving” and “centrifuging”, etc. Guided by a modest amount of annotation, a random forest classifier can then associate these steps with different categories of materials synthesis, such as solid-state or hydrothermal synthesis. Finally, we show that a Markov chain representation of the order of experimental steps accurately reconstructs a flowchart of possible synthesis procedures. Our machine-learning approach enables a scalable approach to unlock the large amount of inorganic materials synthesis information from the literature and to process it into a standardized, machine-readable database.

36 MATERIALS SCIENCE↗