Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Field stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Radiocarbon age at Teller and Kougarok field sites, Seward Peninsula, Alaska

With extreme climate warming in the Arctic, there is increasing focus on permafrost stability and improving understanding of the impacts of thawing permafrost. Understanding the stability of carbon in Arctic permafrost supports our understanding of the global carbon cycle. Organic (plant / wood) samples were collected from varying depths and landscape features at the Teller 33, Teller 47, Teller 51, Kougarok 64, and Kougarok 86 field sites on the Seward Peninsula, Alaska in the summers of 2014, 2017, 2019, and 2021. Carbon 13 and 14 isotopes were measured to find radiocarbon age for collected samples. We also report fraction modern and delta 14C. This dataset contains a *.csv file of radiocarbon measurements and a *.kml file of measurement locations. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy’s Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy’s Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

EARTH SCIENCE > CLIMATE INDICATORS > PALEOCLIMATE ↗
DOE OSTI2023

Two first-order phase transitions in hybrid compact stars: Higher-order multiplet stars, reaction modes, and intermediate conversion speeds

We study compact stars with hybrid equations of state consisting of a nuclear outer region and two nested quark phases, each separated from the lower density phase by a strong first-order phase transition. The stability of these models is determined by calculating their radial oscillation modes with different conversion rates between adjacent phases and hence junction conditions for the modes at the phase separation interface between them. In the case when the timescale of transition is faster than the period of oscillations, we recover the traditional stability criterion implying that ∂M/∂ρ c > 0 on the stable branch(es), where M is the mass and ρ c is the central density. In the opposite limit of slow conversion, we find stable stellar multiplets beyond triplets consisting of stars that are stable by the usual criterion plus slow-conversion (denoted by s) hybrid stars with ∂M/∂ρ c < 0 that are stabilized due to an alternative junction condition on the fluid displacement field at the interface reflecting the slow rate of conversion. We also study the properties of the reaction mode, the radial mode that only exists for stars with rapid (abbreviated by r) phase transitions, in stars with either two rapid phase transitions or alternating rapid and slow phase transitions for the first time. Here, the implications of alternative junction conditions are also examined, with these conditions generally being found to provide stability properties similar to those for a slow conversion rate.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Thermally Stable Single-Atom Heterogeneous Catalysts

Single-atom catalysts (SACs) have attracted extensive attention in fields related to energy, environment, and material sciences because of the high atom efficiency and the unique properties of these materials. Many approaches have hitherto been successfully established to prepare SACs, including impregnation, pyrolysis-involved processes, atom trapping, and coprecipitation. However, under typical reaction conditions, single atoms on catalysts tend to migrate or agglomerate, forming nanoclusters or nanoparticles, which lowers their surface free energy. Efforts are required to develop strategies for improving the thermal stability of SACs while achieving excellent catalytic performance. Here in this Progress Report, recent advances in the development of thermally durable single-atom heterogeneous catalysts are discussed. Several important preparation approaches for thermally stable SACs are described in this article. Fundamental understanding of the coordination structures of thermally stable single atom prepared by these methods is discussed. Furthermore, the catalytic performances of these thermally stable SACs are reviewed, including their activity and stability. Finally, a perspective of this important and rapidly evolving research field is provided.

coordination structure↗
DOE OSTI2022

Magnetic control over the fundamental structure of atomic wires

When reducing the size of materials towards the nanoscale, magnetic properties can emerge due to structural variations. Here, we show the reverse effect, where the structure of nanomaterials is controlled by magnetic manipulations. Using the break-junction technique, we find that the interatomic distance in platinum atomic wires is shorter or longer by up to ~20%, when a magnetic field is applied parallel or perpendicular to the wires during their formation, respectively. The magnetic field direction also affects the wire length, where longer (shorter) wires are formed under a parallel (perpendicular) field. Our experimental analysis, supported by calculations, indicates that the direction of the applied magnetic field promotes the formation of suspended atomic wires with a specific magnetization orientation associated with typical orbital characteristics, interatomic distance, and stability. A similar effect is found for various metal and metal-oxide atomic wires, demonstrating that magnetic fields can control the atomistic structure of different nanomaterials when applied during their formation stage.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structure and Dynamics of Domains in Ferroelectric Nanostructures – Phase-Field Modeling (Final Technical Report)

Domain pattern formation is one of the most common phenomena in nature and is a topic of immense interest in many fields ranging from materials science and physics to chemistry and biology. This DOE sponsored research project explored the basic science concerning the thermodynamic stability of mesoscale polarization domain patterns and their temporal evolution mechanisms during formation and subsequent switching in ferroelectric nanostructures and heterostructures. The project employed the computational phase-field method in combination of microelasticity and electrostatic theories. The research was carried out in close collaboration with a number of experimental groups who used High Resolution Transmission Electron Microscopy (HRTEM), in situ TEM with Scanning Probe Microscopy (SPM), or Piezoresponse Force Microscopy (PFM) to characterize the domain structures and dynamics of ferroelectric thin films and heterostructures and who grow high-quality ferroelectric and multiferroic thin films using advanced growth techniques such as Molecular Beam Epitaxy (MBE), Pulsed Laser Deposition (PLLD), and sputtering. The research efforts of the project help establish the phase-field method as the most powerful method for understanding and predicting domain structures in ferroelectric thin films and nanostructures. The findings of the project led to the basic understanding of stability and switching mechanisms of ferroelectric domains under different mechanical boundary conditions and under either homogeneous capacitor configurations or local fields using metallic probes as electrodes and the emergence of charged domain walls during domain switching. The project predicted the spatial length scales, temperature ranges, and electromechanical conditions for different polar states in heterostructures and guided the discovery of both transient and stable novel polarization states containing vortex lattices in oxide superlattices. The project resulted in 134 journal publications and 6 PhD theses with all the PhD graduates currently working in either academia or industry within the United States. The basic understanding on the stability of mesoscale polar states and pattern evolution achieved by the project improved our ability to control and engineer properties of ferroelectric thin films and heterostructures for potential applications in nanoscale electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Efficient learning of t -doped stabilizer states with single-copy measurements

One of the primary objectives in the field of quantum state learning is to develop algorithms that are time-efficient for learning states generated from quantum circuits. Earlier investigations have demonstrated time-efficient algorithms for states generated from Clifford circuits with at most log &#x2061; ( n ) non-Clifford gates. However, these algorithms necessitate multi-copy measurements, posing implementation challenges in the near term due to the requisite quantum memory. On the contrary, using solely single-qubit measurements in the computational basis is insufficient in learning even the output distribution of a Clifford circuit with one additional T gate under reasonable post-quantum cryptographic assumptions. In this work, we introduce an efficient quantum algorithm that employs only nonadaptive single-copy measurement to learn states produced by Clifford circuits with a maximum of O ( log &#x2061; n ) non-Clifford gates, filling a gap between the previous positive and negative results.

Physics↗
DOE OSTI2024

Advanced Perovskite Solar Cells and Modules

The “Advanced perovskite Cells and Modules” research project was the final agreement focused on enhancing perovskite solar cell (PSC) technologies funded by the US Department of Energy's Solar Energy Technologies Office. The project was designed to address three crucial areas in PSC development: stability, manufacturability, and efficiency. The project was then structured around three main tasks, each targeting one of these strategic goals. The team of experienced researchers in these materials worked collaboratively to address the targets outlined in the technical work plan. building on existing PSC research while also exploring promising new concepts arising in the field. An overview of each primary task is summarized below: Task 1 Stability: This first task, aims to identify material characteristics and metrics that can help predict the primary degradation mechanisms impacting PSC stability. This involved developing specific device tests based on hypotheses regarding mechanisms impacting stability, including fast failure procedures to speed up PSC development and improvement. Various strategies to enhance stability, like incorporating additives, post-treatments, novel contact materials etc. were developed using this fast feedback approach. The relationships between indoor and outdoor stresses were also validated. Task 2 Manufacturability: This second task, focused on creating a scalable production process for PSCs. Initially the objective is to establish a best-known method for a 182 cm2 minimodule. However, given resource limitations, these metrics were modified to focus on the other goal of outlined in the TWP. Specifically, this task worked to demonstrate the transferability of this best-known method to another research institution. Work scope in this area was expanded to material purity and understanding of reagent/process relationships. Examination of other difficulties in PSC production and potential solutions for large-scale production were also evaluated. Given challenges observed in process transfer, work to develop data infrastructure and recording tools for processing of material and devices was then also prioritized in this task. Task 3 Efficiency: This task was focused on improvements to PCE, while still considering Task 1 and Task 2 goal. The efforts targeted a PCE greater than 22% with a T95 exceeding 1000 hours at 25°C in a nitrogen environment for lab-scale devices (approximately 0.1 cm2 devices) across a range of solar-relevant perovskite compositions, including wide-gap (around 1.7 eV) and low-gap (around 1.3 eV) materials, using standard metal contacts. This work then provides a foundation for MHP-based tandem efforts undertaken in other projects and the All-MHP tandem efforts outlined in this projects TWP. Work in this project emphasized disseminating its findings through peer-reviewed publications (PRP), conference presentations, and industrial collaborations. Significant products were produced in all these areas, over 53 peer reviewed publications, 32 conference presentations and industrial investment based on NLR assistance on precompetitive challenges. The team also developed significant intellectual property and awards for their technical excellence, innovations and leadership. The team also leveraged traditional and social media platforms to engage with stakeholders and the public.

14 SOLAR ENERGY↗
DOE OSTI2020

A Pilot-Scale Evaluation of Natural Gas-Based Foam at Elevated Pressure and Temperature Conditions

Abstract Nitrogen (N2) and Carbon Dioxide (CO2) foams have been used as hydraulic fracturing fluids for several decades to reduce water usage and minimize damage in water-sensitive reservoirs. These foam treatments require gases to be liquefied and transported to site. An alternative approach would be to use natural gas (NG) that is readily available from nearby wells, pipelines, and processing facilities as the internal, gaseous phase to create a NG-based foam. Hydraulic fracturing with NG foam is a relatively inexpensive option, makes use of an abundant and often wasted resource, and may even provide production benefits in certain reservoirs. As part of an ongoing development project sponsored by the Department of Energy (DOE), the surface process to create NG foam is being developed and the properties of NG foam are being explored. This paper presents recent results from a rigorous pilot-scale demonstration of NG foam over a range of operating scenarios relevant to surface and bottomhole conditions with a variety of base-fluid mixtures. The Pilot-scale Foam Test Facility (PFTF) used in these investigations is first described. The PFTF is capable of generating foamed fluids at pressures up to 7,500 psig and at temperatures in excess of 300°F. Then, results from several investigations aimed at proving NG foam at conditions relevant to the field are presented. NG foam was characterized using rheology measurements and flow visualization techniques. Experiments were performed to investigate the texture and stability of NG foam generated by two different mixing methods: one using a custom designed tee to match mixing velocities in the field where the gas phase is jetted into the aqueous stream, and another to ensure comprehensive mixing for laboratory analysis. Parametric studies were conducted to explore the effects of flow rate, foam quality, and temperature on the stability of NG foam. Moreover, different fluid preparations were used to investigate the effect of base fluid and additive concentrations on the stability of NG foams. Additional laboratory studies that investigated foam stability with produced water and multicomponent NG mixtures are also reported. The NG foams explored in these investigations exhibited typical, shear-thinning behavior observed in rheological studies of N2- and CO2-based foams. The measured viscosity and observed stability indicate that NG foams are well suited for fracturing applications. Like other foams, NG foam exhibits sensitivity to operating temperature characterized by a decrease in apparent viscosity as temperature increases. Rapid foam breakdown was observed at significantly elevated temperatures exceeding 290°F. In addition to fluid characterization, these investigations also yielded several key lessons that should be applied to future field demonstrations of NG foam.

Beck, Griffin↗
DOE OSTI2020

MnBi-based magnets prepared from melt-spun alloys: Effect of $α → β$ phase transformation during field annealing

The temperature of the annealing treatment applied to the MnBi alloys with the intention to stabilize the α -MnBi “low-temperature” phase – a promising material for the rare-earth-free permanent magnets – is usually kept below the range of the β -Mn 1.08 Bi “high-temperature” phase. This work is focused on the investigation of the effects of partial and complete α → β phase transformation in bulk magnetic-field-annealed magnets on their structure and magnetic properties. MnBi alloys modified with In, Mg and Sb were melt-spun, compacted to their full density and then heated in a magnetic field of 30 kOe to temperatures sufficiently high for the beginning of the α → β transformation. A heating of 15 °C/min was used which was immediately followed by cooling at the rate of 7.5 °C/min; the degree of the phase transformation was measured by in situ monitoring of changes in the sample magnetization. In all the studied alloys, the α → β transformation was found to improve the [0 0 1] fiber texture induced by the applied magnetic field, although it simultaneously decreased the coercivity. A partial transformation has resulted in a 11% increase of the maximum energy product for the Mn 50 Bi 49 Sb 0.5 In 0.5 magnet, to 8.3 MGOe, and a 3% increase for the Mn 50 Bi 46 Mg 3 Sb 0.5 In 0.5 magnet, to 12.8 MGOe. In the latter alloy, the α → β and reverse transformations were found to initially occur in well-defined pockets leading to clusters of large, highly textured α crystallites. In the Mn 50 Bi 48.5 Sb 1.5 magnet, only part of the α phase could be recovered after the transformation, which instead promoted the paramagnetic MnBi 0.9 Sb 0.1 phase.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Precision Spectroscopy of 20 O Benchmarking Ab Initio Calculations in Light Nuclei

The excited states of unstable 20 O were investigated via γ-ray spectroscopy following the 19 O(d, p) ⁢20 O reaction at 8 A⁢ MeV. By exploiting the Doppler shift attenuation method, the lifetimes of the $2^+_2$ and $3^+_1$ states were firmly established. From the γ-ray branching and E⁢2/M⁢1 mixing ratios for transitions deexciting the $2^+_2$ and $3^+_1$ states, the B⁡(E⁢2) and B⁡(M⁢1) were determined. Various chiral effective field theory Hamiltonians, describing the nuclear properties beyond ground states, along with a standard USDB interaction, were compared with the experimentally obtained data. Such a comparison for a large set of γ-ray transition probabilities with the valence space in medium similarity renormalization group ab initio calculations was performed for the first time in a nucleus far from stability. It was shown that the ab initio approaches using chiral effective field theory forces are challenged by detailed high-precision spectroscopic properties of nuclei. Finally, the reduced transition probabilities were found to be a very constraining test of the performance of the ab initio models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Quantum spin helices more stable than the ground state: Onset of helical protection

Topological magnetic structures are promising candidates for resilient information storage. An elementary example is spin helices in one-dimensional easy-plane quantum magnets. To quantify their stability, we numerically implement the stochastic Schrödinger equation and time-dependent perturbation theory for spin chains with fluctuating local magnetic fields. Here, we find two classes of quantum spin helices that can reach and even exceed ground-state stability: spin-current-maximizing helices and, for fine-tuned boundary conditions, the recently discovered “phantom helices.” Beyond that, we show that the helicity itself (left or right rotating) is even more stable. We explain these findings by separated helical sectors and connect them to topological sectors in continuous spin systems. The resulting helical protection mechanism is a promising phenomenon for stabilizing helical quantum structures, e.g., in ultracold atoms and solid-state systems. We also identify a third type of phantom helix in the system.

1-dimensional spin chains↗
DOE OSTI2025

Behaviour of cadmium isotopes in sulfidic waters and sediments of the Black Sea: Implications for global cadmium cycling and the application of cadmium isotopes as a paleo-oceanographic proxy

The cadmium isotope system has found use as a tracer for biological productivity, redox and organic carbon burial in the oceans. There are, however, very few observational constraints on Cd isotopic behaviour in modern sulfidic marine conditions, limiting our understanding of the modern Cd cycle, and our ability to use Cd isotope measurements of ancient sedimentary deposits as a paleoceanographic proxy. Here we study the behaviour of dissolved Cd in the water column of the Black Sea and its incorporation into sediments on the basin floor. The isotopic composition of dissolved Cd in the upper ∼50 m of the Black Sea water column is controlled by a combination of biological uptake and regeneration along with mixing of river water and Mediterranean seawater. Cadmium declines to <2 % of its peak subsurface concentration within the zone of nitrate-reduction but above the sulfide chemocline. The isotopic composition of dissolved Cd below the sulfide chemocline evolves in a manner that is consistent with experimental Cd sulfide fractionation factors, providing field-based support for these earlier studies. In contrast, the stability of the dissolved Cd isotopic signature above the chemocline, despite a large reduction in dissolved Cd concentrations, is explained by diffusion towards the Cd-sulfide sink below the chemocline. Sediments accumulating in the deep Black Sea below the sulfide chemocline have isotopic compositions that are similar to dissolved Cd in its near-surface aqueous concentration maximum. Sediments accumulating at shallower depths have lighter isotopic compositions that are likely affected by non-sulfidic burial pathways mediated by macrofaunal mixing and diagenesis of shallow burial phases. Our study shows that the isotopic composition of bulk sediments accumulating under sulfidic conditions is similar to dissolved Cd in the upper water column, supporting its use as a paleo-chemical proxy for ancient seawater as long as basin-scale controls on open ocean seawater sources are considered. We show that Cd burial in the deep Black Sea, predominantly as CdS, accounts for ∼0.5–15 % of total annual Cd burial in the global ocean.

Biogeochemical cycles↗
DOE OSTI2025

Leveraging Intramolecular π-Stacking to Access an Exceptionally Long-Lived 3 MC Excited State in an Fe(II) Carbene Complex

The ability to manipulate excited-state decay cascades using molecular structure is essential to the application of abundant-metal photosensitizers and chromophores. Ligand design has yielded some spectacular results elongating charge-transfer excited state lifetimes of Fe(II) coordination complexes, but triplet metal-centered ( 3 MC) excited states - recently demonstrated to be critical to the photoactivity of isoelectronic Co(III) polypyridyls - have to date remained elusive, with temporally isolable examples limited to the picosecond regime. Here, with this report, we show how strong-field donors and intramolecular π-stacking can conspire to stabilize a long-lived 3 MC excited state for a remarkable 4.1 ± 0.3 ns in fluid solution at ambient temperature. Analysis of variable-temperature time-resolved absorption data using theoretical models ranging from Arrhenius to semiclassical Marcus theory, combined with computational modeling and X-ray crystallography, reveal a Jahn−Teller stabilized excited state with a high activation barrier for ground-state recovery. The net result is a chromophore with a 3 MC excited-state lifetime that is orders of magnitude longer than anything yet observed for an Fe(II) complex.

carbene compounds↗
DOE OSTI2025

Taming harmful bursts and heat flux in high-confinement tokamak plasmas

A major challenge in tokamak fusion research is first-wall erosion caused by steady heat loads and sudden energy bursts known as edge-localized modes. Divertor detachment reduces steady-state heat flux, while resonant magnetic perturbations can suppress these instabilities. However, integrating the two has been difficult because they require conflicting operating conditions. Here we demonstrate simultaneous achievement of resonant magnetic perturbations mitigated small edge-localized modes and impurity seeded partial divertor detachment in plasmas with an ITER-similar shape on the DIII-D tokamak. Experiments and simulations show that resonant magnetic perturbations facilitate detachment by redistributing particles, lowering the core density and increasing the scrape-off layer density, thereby reducing the amount of injected gas required. Cooling-gas injection eliminates the secondary heat-flux peak created by three-dimensional magnetic lobes, while edge cooling weakens the plasma response to the applied magnetic fields. These advances illustrate a viable pathway for integrating edge stability control with power exhaust in future fusion reactors.

magnetically confined plasmas↗
DOE OSTI2025

Machine learning-accelerated discovery of heat-resistant polysulfates for electrostatic energy storage

The development of heat-resistant dielectric polymers that withstand intense electric fields at high temperatures is critical for electrification. Balancing thermal stability and electrical insulation, however, is exceptionally challenging as these properties are often inversely correlated. A traditional intuition-driven polymer design approach results in a slow discovery loop that limits breakthroughs. Here we present a machine learning-driven strategy to rapidly identify high-performance, heat-resistant polymers. A trustworthy feed-forward neural network is trained to predict key proxy parameters and down select polymer candidates from a library of nearly 50,000 polysulfates. The highly efficient and modular sulfur fluoride exchange click chemistry enables successful synthesis and validation of selected candidates. A polysulfate featuring a 9,9-di(naphthalene)-fluorene repeat unit exhibits excellent thermal resilience and achieves ultrahigh discharged energy density with over 90% efficiency at 200 °C. Its exceptional cycling stability underscores its promise for applications in demanding electrified environments.

Li, He↗
DOE OSTI2024

On-demand nanoengineering of in-plane ferroelectric topologies

Hierarchical assemblies of ferroelectric nanodomains, so-called super-domains, can exhibit exotic morphologies that lead to distinct behaviours. Controlling these super-domains reliably is critical for realizing states with desired functional properties. Here we reveal the super-switching mechanism by using a biased atomic force microscopy tip, that is, the switching of the in-plane super-domains, of a model ferroelectric Pb 0.6 Sr 0.4 TiO 3 . We demonstrate that the writing process is dominated by a super-domain nucleation and stabilization process. A complex scanning-probe trajectory enables on-demand formation of intricate centre-divergent, centre-convergent and flux-closure polar structures. Correlative piezoresponse force microscopy and optical spectroscopy confirm the topological nature and tunability of the emergent structures. The precise and versatile nanolithography in a ferroic material and the stability of the generated structures, also validated by phase-field modelling, suggests potential for reliable multi-state nanodevice architectures and, thereby, an alternative route for the creation of tunable topological structures for applications in neuromorphic circuits.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Tuning interfacial Dzyaloshinskii-Moriya interactions in thin amorphous ferrimagnetic alloys

Skyrmions can be stabilized in magnetic systems with broken inversion symmetry and chiral interactions, such as Dzyaloshinskii-Moriya interactions (DMI). Further, compensation of magnetic moments in ferrimagnetic materials can significantly reduce magnetic dipolar interactions, which tend to favor large skyrmions. Tuning DMI is essential to control skyrmion properties, with symmetry breaking at interfaces offering the greatest flexibility. However, in contrast to the ferromagnet case, few studies have investigated interfacial DMI in ferrimagnets. Here we present a systematic study of DMI in ferrimagnetic CoGd films by Brillouin light scattering. We demonstrate the ability to control DMI by the CoGd cap layer composition, the stack symmetry and the ferrimagnetic layer thickness. The DMI thickness dependence confirms its interfacial nature. In addition, magnetic force microscopy reveals the ability to tune DMI in a range that stabilizes sub-100 nm skyrmions at room temperature in zero field. Our work opens new paths for controlling interfacial DMI in ferrimagnets to nucleate and manipulate skyrmions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Direct prediction of nonlinear tearing mode saturation using a variational principle

It is shown that the variational principle of multi-region relaxed magnetohydrodynamics (MRxMHD) can be used to predict the stability and nonlinear saturation of tearing modes in strong guide field configurations without resolving the dynamics and without explicit dependence on the plasma resistivity. While the magnetic helicity is not a good invariant for tearing modes, we show that the saturated tearing mode can be obtained as an MRxMHD state of a priori unknown helicity by appropriately constraining the current profile. The predicted saturated island width in a tearing-unstable force-free slab equilibrium is shown to reproduce the theoretical scaling at small values of Δ' and the scaling obtained from resistive magnetohydrodynamics simulations at large Δ'.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗