SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This work provides a current update of radiation testing activities on 3D NAND flash memories in support of the NEPP program. Single-event effects data from heavy-ion and low-energy proton testing is highlighted on a state of the art memory device.
This work provides a current update of radiation testing activities on 3D NAND flash memories in support of the NEPP program. Single-event effects data from heavy-ion and low-energy proton testing is highlighted on a state of the art memory device.
The purpose of this test was to characterize the Micron 512 GB NAND (MT29F512G08AUCBBH8-6IT:B) flash memory parameter degradation for total dose response. In the test, the device was exposed to high dose rate (HDR) irradiations using gamma radiation. Device parameters such as leakage currents, quantity of upset bits and overall chip and die health were investigated.
This paper discusses the space radiation effects in advanced flash memories.
Flash memories have evolved very rapidly in recent years.
This paper discusses single-event upset effets in flash memories, using heavy ions at the Texas A&M cyclotron. Initial results are presented for one manufacturer that compare uspet in the individual memory elemts with the more complex funtion failure modes that occur in the internal state machine and its control registers. This device is designed to function with either 5-V or 3.3-V power supply levels for read operations, but requires an additional 5 or 12-V power supply for write and erase operations.
Single-event upsets are observed in a 72-layer 3D NAND flash memory operated in single-level cell mode after low-energy proton (500 keV-1.2 MeV) and heavy ion irradiation. The layer-by-layer error count is analyzed to visualize the stopping of low energy protons within the memory stack, and Monte Carlo simulations are correlated with the experimental data. Direct ionization by low-energy protons is identified by three-dimensional data analysis and the energy dependence of device sensitive cross-section. Heavy ion data is also presented for comparison.
The Hunga Tonga–Hunga Ha’apai submarine volcano recently resumed activity. Violent eruptions on 2022 January 14th and 15th launched a tall ash plume that produced extremely high lightning rates. Here we report a terrestrial gamma-ray flash (TGF) that was produced by the volcanic lightning and observed from space by the Fermi Gamma-ray Burst Monitor (GBM). Observations by radio lightning networks and especially by the Geostationary Lightning Mapper (GLM) show that the only lightning close enough to produce a TGF detectable by Fermi GBM was from the volcano’s plume. With the observing duration of Fermi, observing a single TGF is consistent with the hypothesis that the volcanic lightning of this eruption produced TGFs at the average rate of thunderstorm lightning. The observation of a strong TGF from space also indicates that the electric field was oriented so as to accelerate electrons upward.
This paper describes a novel approach to safe landing problem by utilizing an onboard Flash Lidar to generate high-resolution elevation maps and applying a threshold-based approach to determine hazardous terrain features and identify safe landing locations.
A Flash Lidar utilizing a novel Super-Resolution technique has been developed for providing Terrain Relative Navigation and Hazard Avoidance capabilities onboard landing vehicles.
For bonded composite materials, an accurate characterization of the adhesive bond line is needed to predict failure modes and fracture toughness. In this paper, bond line thickness was estimated from data obtained using through transmission flash thermography. The forward model that predicts back surface temperature is based on a three layer heat diffusion equation with varying diffusivity and flux boundary conditions. The corresponding inverse problem of estimating bond line thickness from measurement data was solved using a Bayesian approach that assumed Gaussian priors for the bond line thickness and thermal diffusivity of the adherends. Finally, the outputs of the thermography based method were compared to measurements that were collected using a micrometer and ultrasound testing.
For bonded composite materials, an accurate characterization of the adhesive bond line is needed to predict failure modes and fracture toughness. In this paper, bond line thickness was estimated from data obtained using through transmission flash thermography. The forward model that predicts back surface temperature is based on a three layer heat diffusion equation with varying diffusivity and flux boundary conditions. The corresponding inverse problem of estimating bond line thickness from measurement data was solved using a Bayesian approach that assumed Gaussian priors for the bond line thickness and thermal diffusivity of the adherends. Finally, the outputs of the thermography based method were compared to measurements that were collected using a micrometer and ultrasound testing.
This paper describes the use of a new polymer entrapment flash pyrolysis (PEFP) method for making nanoscale yttrium ruthenate (Y 2 Ru 2 O 7-δ ) electrocatalysts. Here, this approach effectively reduced the synthesis temperature of phase-pure pyrochlore catalysts from 1000 °C to 550 °C, and greatly suppressed the sintering of catalyst particles. The supported nanocrystalline Y 2 Ru 2 O 7-δ catalysts showed enhanced activity towards oxygen evolution reaction (OER) in acidic electrolyte and were stable at 1.50 V for the comparative study (>20 h) under the current density of 10 mA/cm 2 geo in chronopotentiometry testing. This is equivalent to an overpotential value of 270 mV, about half of that of the reference IrO 2 catalyst. X-ray absorption spectroscopy (XAS) and transmission electron microscopy (TEM) analysis showed that the high-surface-area Y 2 Ru 2 O 7-δ catalyst had an oxygen-deficient structure. This study provides a route to the synthesis of fine ceramic (or oxide)-based electrocatalysts for making high-performing electrocatalysts.
Abstract The present work presents results from an investigation of the glass transition and crystallization behaviors of HNAB tested over more than five orders of magnitude of cooling rate from 0.005 °C/s to 600 °C/s (0.3 to 36000 °C/min) by a combination of conventional and Flash differential scanning calorimetry (DSC). The work quantifies the influence of the thermal amorphization route on the properties of this high explosive. Cooling rates faster than 100 °C/s (6000 °C/min) result in amorphous HNAB as expected from prior work, but we also find that amorphization of the HNAB occurs at cooling rates slower than 0.008 °C/s (0.5 °C/min). The behavior of the amorphous HNAB made by slow cooling is compared with that of amorphous HNAB made by fast cooling, as well as with that made by solvent casting in terms of glass transition temperature, apparent activation energy of glass transition, and dynamic fragility parameter m . Besides, the non‐isothermal crystallization response as a function of cooling rate is also reported. The thermal stability and decomposition energy of amorphous HNAB are compared with those of the crystalline counterpart, being similar heats of decomposition of 3295 and 3392 J/g, respectively; suggesting that the amorphous HNAB will have similar thermal stability and chemical energy to the crystalline form.
An integrated biorefinery concept is a novel and economical process intensification methodology for efficient utilization of biomass components. In this research, microalgae (Scenedesmus sp.) slurry with biomass concentration of 8.5 wt.% was parallelly fractionated using two techniques: 'flash hydrolysis (FH)' and 'acid hydrolysis (AH)'. FH was performed at 240 degrees C with a residence time of 10 +/- 2 s in a continuous flow reactor, whereas AH was performed at 155 degrees C and reaction time of 15 min in a batch reactor. About 63% of microalgal biomass was solubilized in liquid hydrolysate through both FH and AH. However, AH had an advantage over FH in recovering microalgae proteins and carbohydrates. FAME recovery through solvent extraction from FH and AH derived wet solids (insoluble microalgae) was 40 and 63%, respectively. Finally, the FH- and AH-derived post extraction solid residue was thermally activated using K2CO3 to produce highly microporous biocarbon nanosheets with BET surface areas of 712 and 1289 m2 g-1, respectively. Overall, an integrated process was developed using two potential hydrolysis techniques to maximize utilization of microalgae components.
Abstract This review provides a comprehensive overview of the progress in light–material interactions (LMIs), focusing on lasers and flash lights for energy conversion and storage applications. We discuss intricate LMI parameters such as light sources, interaction time, and fluence to elucidate their importance in material processing. In addition, this study covers various light-induced photothermal and photochemical processes ranging from melting, crystallization, and ablation to doping and synthesis, which are essential for developing energy materials and devices. Finally, we present extensive energy conversion and storage applications demonstrated by LMI technologies, including energy harvesters, sensors, capacitors, and batteries. Despite the several challenges associated with LMIs, such as complex mechanisms, and high-degrees of freedom, we believe that substantial contributions and potential for the commercialization of future energy systems can be achieved by advancing optical technologies through comprehensive academic research and multidisciplinary collaborations.
In this study, procedures were developed to achieve efficient reversible conversion of a clinical linear accelerator (LINAC) and deliver ultrahigh-dose-rate (UHDR) electron or conventional beams to the treatment room isocenter for FLASH radiation therapy.
To establish and investigate the effects of dose, linear energy transfer (LET), and O{sub 2} concentration on biologic response to ultrahigh dose rate (uHDR; FLASH) helium ion beams compared with standard dose rate (SDR) irradiation.