Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Kinetic Parameters for the Hydrogen and Ethylene Flames from Flashback Measurements

Values for the flame activation energy and an overall reaction order have been obtained for premixed hydrogen-oxygen and ethylene-oxygen flames with nitrogen and with argon as diluents; the values come from measurements of the change with pressure and flame temperature of the critical boundary velocity gradient for flashback. Measurements have been made for rich and stoichiometric hydrogen flames and for lean and stoichiometric ethylene flames. For hydrogen flames with nitrogen diluent an overall order of 2*3 is found; for ethylene flames with nitrogen diluent, the order obtained is 1*8. With argon diluent, values for the order are about 10 per cent lower for each flame. With nitrogen diluent the flame activation energy apparently increases with flame temperature; this increase is not found with argon diluent. For hydrocarbon flames the assumption that the initial equivalence ratio equals the effective equivalence ratio in the flame leads to an order of reaction with respect to oxygen that is considerably larger than unity. For hydrogen flames, that assumption is consistent with an oxygen order of unity.

Fine, B.↗

Investigation of critical equivalence ratio and chemical speciation in flames of ethylbenzene-ethanol blends

This work investigates five different one-dimensional, laminar, atmospheric pressure, premixed ethanol/ethylbenzene flames (0%, 25%, 50%, 75% and 90% ethanol by weight) at their soot onset threshold ({phi}{sub critical}). Liquid ethanol/ethylbenzene mixtures were pre-vaporized in nitrogen, blended with an oxygen-nitrogen mixture and, upon ignition, burned in premixed one-dimensional flames at atmospheric pressure. The flames were controlled so that each was at its visual soot onset threshold, and all had similar temperature profiles (determined by thermocouples). Fixed gases, light volatile hydrocarbons, polycyclic aromatic hydrocarbons (PAH), and oxygenated aromatic hydrocarbons were directly sampled at three locations in each flame. The experimental results were compared with a detailed kinetic model, and the modeling results were used to perform a reaction flux analysis of key species. The critical equivalence ratio was observed to increase in a parabolic fashion as ethanol concentration increased in the fuel mixture. The experimental results showed increasing trends of methane, ethane, and ethylene with increasing concentrations of ethanol in the flames. Carbon monoxide was also seen to increase significantly with the increase of ethanol in the flame, which removes carbon from the PAH and soot formation pathways. The PAH and oxygenated aromatic hydrocarbon values were very similar in the 0%, 25% and 50% ethanol flames, but significantly lower in the 75% and 90% ethanol flames. These results were in general agreement with the model and were reflected by the model soot predictions. The model predicted similar soot profiles for the 0%, 25% and 50% ethanol flames, however it predicted significantly lower values in the 75% and 90% ethanol flames. The reaction flux analysis revealed benzyl to be a major contributor to single and double ring aromatics (i.e., benzene and naphthalene), which was identified in a similar role in nearly sooting or highly sooting ethylbenzene flames. The presence of this radical was significantly reduced as ethanol concentration was increased in the flames, and this effect in combination with the lower carbon to oxygen ratios and the enhanced formation of carbon monoxide, are likely what allowed higher equivalence ratios to be reached without forming soot. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topology and burning rates of turbulent, lean, H 2 /air flames

Improved understanding of turbulent flames characterized by negative consumption speed-based Markstein lengths is necessary to develop better models for turbulent lean combustion of high hydrogen content fuels. In this paper we investigate the topology and burning rates of turbulent, lean (φ = 0.31), H 2 /air flames obtained from a recently published DNS database (Aspden et al., 2011). We calculate local flame front curvatures, strain rates, thicknesses, and burning velocities and compare these values to reference quantities obtained from stretched laminar flames computed numerically in three model geometrical configurations-a counterflow twin flame, a tubular counterflow flame and an expanding cylindrical flame. We compare and contrast the DNS with these model laminar flame calculations, and show both where they closely correlate with each other, as well as where they do not. These results in the latter case are shown to result from non-flamelet behaviors, unsteady effects, and curvature-strain correlations. These insights are derived from comparisons conditioned on different topological features, such as portions of the flame front with a spherical/cylindrical shape, the leading edge of the flame, and portions of the flame front with low mean curvature. We also show that reference time scales vary appreciably over the flame, and characterizing the relative values of fluid mechanic and kinetic time scales by a single value leads to erroneous conclusions. For example, there is a two order of magnitude decrease in chemical time scales at the leading edge of the front relative to its unstretched value. In conclusion, for this reason, the leading edge of the front quite closely tracks quasi-steady calculations, even in the lowest Damköhler number case, Da F ~0.005

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct numerical simulation of a high-pressure hydrogen micromix combustor: Flame structure and stabilisation mechanism

A high-pressure hydrogen micromix combustor has been investigated using direct numerical simulation with detailed chemistry to examine the flame structure and stabilisation mechanism. The configuration of the combustor was based on the design by Schefer et al., using numerical periodicity to mimic a large square array. A precursor simulation of an opposed jet-in-crossflow was first conducted to generate appropriate partially-premixed inflow boundary conditions for the subsequent reacting simulation. The resulting flame can be described as an predominantly-lean inhomogeneously-premixed lifted jet flame. Five main zones were identified: a jet mixing region, a core flame, a peripheral flame, a recirculation zone, and combustion products. The core flame, situated over the jet mixing region, was found to burn as a thin reaction front, responsible for over 85% of the total fuel consumption. The peripheral flame shrouded the core flame, had low mean flow with high turbulence, and burned at very lean conditions (in the distributed burning regime). It was shown that turbulent premixed flame propagation was an order-of-magnitude too slow to stabilise the flame at these conditions. Stabilisation was identified to be due to ignition events resulting from turbulent mixing of fuel from the jet into mean recirculation of very lean hot products. Ignition events were found to correlate with shear-driven Kelvin-Helmholtz vortices, and increased in likelihood with streamwise distance. At the flame base, isolated events were observed, which developed into rapidly burning flame kernels that were blown downstream. Further downstream, near-simultaneous spatially-distributed ignition events were observed, which appeared more like ignition sheets. The paper concludes with a broader discussion that considers generalising from the conditions considered here.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of two different cool flame regimes of diethyl ether in a counterflow burner

This short communication reports, for the first time, the existence of two different self-sustaining cool flame regimes of diethyl ether (DEE) in a diffusion counterflow burner: a weaker autoignition-assisted cool flame near the fuel burner and a normal diffusion cool flame near the stagnation plane. Here, the results show that the normal diffusion cool flame extinction limit increases monotonically with the fuel mole fraction, while the autoignition-assisted cool flame approaches a plateau and can exist at a fuel mole fraction below the normal diffusion cool flame. It is shown that both flame regimes are governed by the same low-temperature chain-branching reaction pathway of DEE. By using in situ laser diagnostics, entrainment of unburned fuel stream to oxygen stream at the outer edge of the fuel burner is identified as the governing physical mechanism causing a partially premixed self-sustained hollow cool flame structure. The results reveal that when a fuel with high low-temperature reactivity, two different cool flame regimes can be observed in a counterflow flame experiment. Future studies with high-reactivity fuels in a counterflow burner must ensure to distinguish between the two self-sustaining cool flame regimes. Moreover, the existence of these different cool flame regimes needs to be examined so that they would not trigger an uncontrolled combustion phasing in advanced engines fed with high low-temperature reactivity fuels.

33 ADVANCED PROPULSION SYSTEMS↗

Kinetics and extinction of non-premixed cool and warm flames of dimethyl ether at elevated pressure

Here, the growing demand of clean and efficient propulsion and energy systems has sparked an interest in understanding low-temperature combustion at high pressure. Cool flame transition and extinction limits as well as oxygen concentration dependence at elevated pressures provide insights of the low-temperature and high-pressure fuel reactivity. A new experimental high-pressure counterflow burner platform was designed and developed to achieve the studies of high-pressure cool flames. Dimethyl ether (DME) was chosen to study its non-premixed cool flame in high-pressure counterflow burner at pressure up to 5 atm, perhaps for the first time. This paper investigates the effects of pressure on cool flame structure, extinction and transition limits, and oxygen concentration dependence as well as ozone assisted warm flames of DME in experiments and numerical simulations. The results show that the reignition transition from cool flame to hot flame occurs either with the decrease of the strain rate at a given fuel concentration and pressure or with the increase of fuel mole fraction or pressure at a given strain rate. Furthermore, it is shown that the higher pressure shifts the cool flame to higher strain rates and results in higher cool flame extinction strain rates. However, the existing kinetic model of DME fails in predicting the cool flame extinction limit at elevated pressures. Besides, the cool flame extinction limits are proportional to nth power of the oxygen concentration, [O 2 ] n , and the increase of pressure leads to stronger extinction limit dependence (larger n) on oxygen concentration. The present experiment and detailed kinetic analysis show clearly that increasing pressure promotes the low-temperature chemistry including the oxygen addition reactions. In addition, stable warm flame was first experimentally observed by using DME at elevated pressure with ozone sensitization.

33 ADVANCED PROPULSION SYSTEMS↗

Combustion Characteristics in a Non-Premixed Cool-Flame Regime of n-Heptane in Microgravity

A series of distinct phenomena have recently been observed in single-fuel-droplet combustion tests performed on the International Space Station (ISS). This study attempts to simulate the observed flame behavior numerically using a gaseous n-heptane fuel source in zero gravity and a time-dependent axisymmetric (2D) code, which includes a detailed reaction mechanism (127 species and 1130 reactions), diffusive transport, and a radiation model (for CH4, CO, CO2, H2O, and soot). The calculated combustion characteristics depend strongly on the air velocity around the fuel source. In a near-quiescent air environment (< or = 2 mm/s), with a sufficiently large fuel injection velocity (1 cm/s), a growing spherical diffusion flame extinguishes at ≈1200 K due to radiative heat losses. This is typically followed by a transition to the low-temperature (cool-flame) regime with a reaction zone (at ≈700 K) in close proximity to the fuel source. The 'cool flame' regime is formed due to the negative temperature coefficient in the low-temperature chemistry. After a relatively long period (≈18 s) of the cool flame regime, a flash re-ignition occurs, associated with flame-edge propagation and subsequent extinction of the re-ignited flame. In a low-speed (≈3 mm/s) airstream (which simulates the slight droplet movement), the diffusion flame is enhanced upstream and experiences a local extinction downstream at ≈1200 K, followed by steady flame pulsations (≈0.4 Hz). At higher air velocities (4-10 mm/s), the locally extinguished flame becomes steady state. The present axisymmetric computational approach helps in revealing the non-premixed 'cool flame' structure and 2D flame-flow interactions observed in recent microgravity droplet combustion experiments.

diffusion flame↗

Straining and wrinkling processes during turbulence-premixed flame interaction measured using temporally-resolved diagnostics

The dynamical processes of flame surface straining and wrinkling that occur as turbulence interacts with a premixed flame were measured using cinema-stereoscopic PIV (CS-PIV) and orthogonal-plane cinema-stereoscopic PIV (OPCS-PIV). These diagnostics provided temporally resolved measurements of turbulence-flame interaction at frame rates of up to 3 kHz and spatial resolutions as small as 280{mu} m. Previous descriptions of flame straining and wrinkling have typically been derived based on a canonical interaction between a pair of counter-rotating vortices and a planar flame surface. However, it was found that this configuration did not properly represent real turbulence-flame interaction. Interactions resembling the canonical configuration were observed in less than 10% of the recorded frames. Instead, straining and wrinkling were generally caused more geometrically complex turbulence, consisting of large groups of structures that could be multiply curved and intertwined. The effect of the interaction was highly dependent on the interaction geometry. Furthermore, even when the turbulence did exist in the canonical geometry, the straining and wrinkling of the flame surface were not well characterized by the vortical structures. A new mechanistic description of the turbulence-flame interaction was therefore identified and confirmed by the measurements. In this description, flame surface straining is caused by coherent structures of fluid-dynamic strain-rate (strain-rate structures). The role of vortical structures is to curve existing flame surface, creating wrinkles. By simultaneously considering both forms of turbulent structure, turbulence-flame interactions in both the canonical configuration and more complex geometries could be understood. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A mechanistic study of Soret diffusion in hydrogen-air flames

The separate and combined effects of Soret diffusion of the hydrogen molecule (H{sub 2}) and radical (H) on the structure and propagation speed of the freely-propagating planar premixed flames, and the strain-induced extinction response of premixed and nonpremixed counterflow flames, were computationally studied for hydrogen-air mixtures using a detailed reaction mechanism and transport properties. Results show that, except for the conservative freely-propagating planar flame, Soret diffusion of H{sub 2} increases the fuel concentration entering the flame structure and as such modifies the mixture stoichiometry and flame temperature, which could lead to substantial increase (decrease) of the flame speed for the lean (rich) mixtures respectively. On the other hand, Soret diffusion of H actively modifies its concentration and distribution in the reaction zone, which in turn affects the individual reaction rates. In particular, the reaction rates of the symmetric, twin, counterflow premixed flames, especially at near-extinction states, can be increased for lean flames but decreased for rich flames, whose active reaction regions are respectively located at, and away from, the stagnation surface. However, such a difference is eliminated for the single counterflow flame stabilized by an opposing cold nitrogen stream, as the active reaction zone up to the state of extinction is always located away from the stagnation surface. Finally, the reaction rate is increased in general for diffusion flames because the bell-shaped temperature distribution localizes the H concentration to the reaction region which has the maximum temperature. (author)

08 HYDROGEN↗

A numerical study of the diffusive-thermal instability of opposed nonpremixed tubular flames

The diffusive-thermal (D-T) instability of opposed nonpremixed tubular flames near extinction is investigated here using two-dimensional (2-D) direct numerical simulations together with the linear stability analysis. Two different initial conditions (IC), i.e. the perturbed IC and the C-shaped IC are adopted to elucidate the effects of small and large amplitude disturbances on the formation of flame cells, similar to conditions found in linear stability analysis and experiments, respectively. The characteristics of the D-T instability of tubular flames are identified by a critical Damköhler number, Da C , at which the D-T instability first occurs and the corresponding number of flame cells for three different tubular flames with different flame radii. It is found that Da C predicted through linear stability analysis shows good agreement with that obtained from the 2-D simulations performed with two different ICs. The flame cell number, N cell , from the 2-D simulations with the perturbed IC is also found to be equal to an integer close to the maximum wavenumber, k max , obtained from the linear stability analysis. However, N cell from the 2-D simulations with the C-shaped IC is smaller than k max and N cell found from the simulations with the perturbed IC. This is primarily because the strong reaction at the edges of the horseshoe-shaped cellular flame developed from the C-shaped IC is more likely to produce larger flame cells and reduce N cell . It is also found that for cases with the C-shaped IC, once the cellular instability occurs, the number of flame cells remains constant until global extinction occurs by incomplete reaction manifested by small Da. It is also verified through the displacement speed, S d , analysis that the two edges of the horseshoe-shaped cellular flame are stationary and therefore do not merge due to the diffusion–reaction balance at the edges. Moreover, large negative S d is observed at the local extinction points while small positive or negative S d features in the movement of flame cells as they adjust their location and size towards steady state.

42 ENGINEERING↗

Effects of unburnt reaction progress on stretch flame dynamics under elevated temperatures

Flames in practical combustors and engines are inevitably subject to the effects of upstream chemical reaction progress and stretch, induced by elevated thermodynamic conditions and flow non-uniformities, respectively. Recent shock tube experiments and simulation studies on flame propagation have shown that flame speed under engine-relevant conditions can be enhanced with non-negligible upstream chemical reaction progress, especially when low-temperature heat release is involved in the unburnt mixture. On the other hand, depending on the mixture equivalence ratio and diluents, nonequidiffusion (including the non-unity Lewis number effect and the preferential diffusion effect) can couple with the flame stretch to fundamentally affect the flame propagation, which can manifest as either facilitation or suppression. Depending on the transport property of a reacting mixture, there hence can be either inhibition or promotion from unburnt reaction progress and stretch effects on flame propagation. In the current work, through one-dimensional numerical simulations of transient planar and spherical flames of n-heptane/air under elevated thermodynamic conditions, the combined effects of upstream chemical reaction progress and stretch on flame propagation are investigated. Results show that for both lean and rich n-heptane/air mixtures, flame speed can be substantially promoted with reaction progress, while the rich mixtures can exhibit opposite stretch dependence after first-stage ignition. Different definitions of effective Lewis number are adopted to explain the change in Markstein length for spherical flame in lean and rich mixtures reformed by the low temperature chemistry. Further, this work fills an important gap in laminar premixed flame research relevant to practical combustion systems and can provide useful insight into local turbulent flame behaviors and phi-sensitivity in engine combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large eddy simulation of lean blow-off in swirl-stabilized flame with the subgrid dissipation concept

The lean blow-off mechanism of the premixed swirl flame is numerically investigated by large eddy simulation (LES) with the subgrid dissipation concept (SDC) combustion model. Three simulated cases cover stable, near blow-off, and transient conditions. Compared with the experiment, the LES-SDC approach captures the flow and combustion features for stable and near blow-off conditions. More importantly, the predictions of the blowoff procedure and duration agree satisfactorily with the experiment, indicating that the LES-SDC approach is a promising tool for predicting strong, unsteady turbulent combustion processes. Further, the numerical results are used to investigate the blow-off mechanism. Two stages in the blow-off procedure are specified. The first is the necking and extinction of the downstream flame surface, and the second is the shrinking of the upstream flame surface. The blow-off mechanism is well explained by the theory of stretched flame extinction. At the end of the recirculation zone, the large negative radial velocity pushes the flame to the central line. The combustion process here can be abstracted as the stretched counter-flame of the reactant-reactant configuration. The excessive flame stretch dominates the flame extinction and triggers the blow-off event. The upstream flame resists the intense stretch with the help of hot product recirculation, and the combustion here can be idealized as the counter-flame of the reactant-product configuration. The alignment of the temperature gradient and flow velocity, together with the excessive stretch, clearly indicates the tendency of flame local extinction. A Damköhler number-based blow-off criterion is raised from the mean flow strain rate and laminar flame bulk extinction strain rate.

42 ENGINEERING↗

Visualization of the unburned gas flow field ahead of an accelerating flame in an obstructed square channel

The effect of blockage ratio on the early phase of the flame acceleration process was investigated in an obstructed square cross-section channel. Flame acceleration was promoted by an array of top-and bottom-surface mounted obstacles that were distributed along the entire channel length at an equal spacing corresponding to one channel height. It was determined that flame acceleration is more pronounced for higher blockage obstacles during the initial stage of flame acceleration up to a flame velocity below the speed of sound of the reactants. The progression of the flame shape and flame area was determined by constructing a series of three-dimensional flame surface models using synchronized orthogonal schlieren images. A novel schlieren based photographic technique was used to visualize the unburned gas flow field ahead of the flame front. A small amount of helium gas is injected into the channel before ignition, and the evolution of the helium diluted unburned gas pocket is tracked simultaneously with the flame front. Using this technique the formation of a vortex downstream of each obstacle was observed. The size of the vortex increases with time until it reaches the channel wall and completely spans the distance between adjacent obstacles. A shear layer develops separating the core flow from the recirculation zone between the obstacles. The evolution of oscillations in centerline flame velocity is discussed in the context of the development of these flow structures in the unburned gas. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible emission of hydrogen flames

The common misconception that hydrogen flames are not visible is examined. Examples are presented of clearly visible emissions from typical hydrogen flames. It is shown that while visible emissions from these flames are considerably weaker than those from comparable hydrocarbon flames, they are indeed visible, albeit at reduced light levels in most cases. Detailed flame spectra are presented to characterize flame emission bands in the ultraviolet, visible and infrared regions of the spectrum that result in a visible hydrogen flame. The visible blue emission is emphasized, and recorded spectra indicate that fine spectral structure is superimposed on a broadband continuum extending from the ultraviolet into the visible region. Tests were performed to show that this emission does not arise from carbon or nitrogen chemistry resulting from carbon-containing impurities (hydrocarbons) in the hydrogen fuel or from CO{sub 2} or N{sub 2} entrainment from the surrounding air. The spectral structure, however, is also observed in methane flames. The magnitude of the broadband emission increases with flame temperature in a highly nonlinear manner while the finer spectral structure is insensitive to temperature. A comparison of diffusion and premixed H{sub 2} flames shows that the fine scale structure is comparable in both flames. (author)

08 HYDROGEN↗

Structure and behavior of water-laden CH 4 /air counterflow diffusion flames

A counterflow configuration was used to measure thermal and species structure in water-vapor diluted nonpremixed methane–air flames. The motivation is to understand the chemical and thermal effects that water has when it is introduced as a diluent into the fuel side. Here, this work is relevant to combustion processes where water is incorporated naturally in the fuel; e.g., methane hydrates, and when water is added intentionally for emission reduction such as in flares and H 2 O/fuel emulsions combustion. Experimental data are compared to 1-D computations. The agreement is generally very good, but the one dimensional counterflow diffusion model overpredicts flame temperature and major radical, OH, concentration very near extinction in highly diluted H 2 O–methane/air diffusion flames. Changes in flame position, flame width, and peak temperature with the addition of water were measured. Flame temperatures were measured with thin filament pyrometry. OH-PLIF is used to characterize the flame reaction zone with water dilution; the OH distribution, flame position and thickness from the OH-PLIF images were measured. The results show that the OH intensity and reaction zone thickness decreases with the increase in water. Predictions and experiments demonstrate that water mainly acts thermally to lower the flame temperature until extinction. The OH maximum intensity shifts towards the air side of the counterflow burner with water addition. OH is also measured with CO 2 dilution of the fuel stream, and the results are compared with H 2 O addition, including comparisons with the OH molar peak predictions obtained using the GRI 3.0 mechanism and the CHEMKIN Pro one dimensional counterflow model. The study indicates that water’s chemical effects are to change the production and depletion of OH, H and O radicals, especially near extinction. Chemical kinetics simulation of the flame demonstrates good agreement in OH and flame temperatures over a wide range of dilution away from extinction, particularly for CO 2 . Lastly, an over prediction of the water carrying capacity near extinction is found for highly water-diluted flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct numerical simulations of premixed and stratified flame propagation in turbulent channel flow

Here, direct numerical simulations are performed to investigate the transient upstream flame propagation (flashback) through homogeneous and fuel-stratified hydrogen-air mixtures transported in fully developed turbulent channel flows. Results indicate that, for both cases, the flame maintains steady propagation against the bulk flow direction, and the global flame shape and the local flame characteristics are both affected by the occurrence of fuel stratification. Globally, the mean flame shape undergoes an abrupt change when the approaching reactants transition from an homogeneous to a stratified mixing configuration. A V-shaped flame surface, whose leading-edge is located in the near-wall region, characterizes the nonstratified, homogeneous mixture case, while a U-shaped flame surface, whose leading edge propagates upstream at the channel centerline, distinguishes the case with fuel stratification (fuel-lean in the near-wall region and fuel-rich away from the wall). The characteristic thickness, wrinkling, and displacement speed of the turbulent flame brush are subject to considerable changes across the channel due to the dependence of the turbulence and mixture properties on the distance from the channel walls. More specifically, the flame transitions from a moderately wrinkled, thin-flamelet combustion regime in the homogeneous mixture case to a strongly wrinkled flame brush more representative of a thickened-flame combustion regime in the near-wall region of the fuel-stratified case. The combustion regime may be related to the Karlovitz number, and it is shown that a nominal channel-flow Karlovitz number, Ka ch in , based on the wall-normal variation of canonical turbulence ( t η =(ν/ε) 1/2 ) and chemistry ( t l = δ l / S l ) timescales in fully developed channel flow, compares well with an effective Karlovitz number, Ka ch fl , extracted from the present DNS datasets using conditionally sampled values of t η and t l in the immediate vicinity of the flame (0.1 < C < 0.3).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulent Flame Propagation Characteristics of High Hydrogen Content Fuels

This final report describes the results of an effort to better understand turbulent flame propagation, especially at conditions relevant to gas turbines employing fuels with syngas or hydrogen mixtures. Turbulent flame speeds were measured for a variety of hydrogen/carbon monoxide (H 2 /CO) and hydrogen/methane (H 2 /CH 4 ) fuel mixtures with air as the oxidizer. The measurements include global consumption speeds (S T,GC ) acquired in a turbulent jet flame at pressures of 1-10 atm and local displacement speeds (S T,LD ) acquired in a low-swirl burner at atmospheric pressure. The results verify the importance of fuel composition in determining turbulent flame speeds. For example, different fuel-air mixtures having the same unstretched laminar flame speed (S L,0 ) but different fuel compositions resulted in significantly different ST,GC for the same turbulence levels (u'). This demonstrates the weakness of turbulent flame speed correlations based simply on u'/S L,0 . The results were analyzed using a steady-steady leading points concept to explain the sensitivity of turbulent burning rates to fuel (and oxidizer) composition. Leading point theories suggest that the premixed turbulent flame speed is controlled by the flame front characteristics at the flame brush leading edge, or, in other words, by the flamelets that advance farthest into the unburned mixture (the so-called leading points). For negative Markstein length mixtures, this is assumed to be close to the maximum stretched laminar flame speed (S L,max ) for the given fuel-oxidizer mixture. For the S T,GC measurements, the data at a given pressure were well-correlated with an SL,max scaling. However the variation with pressure was not captured, which may be due to non-quasi-steady effects that are not included in the current model. For the S T,LD data, the leading points model again faithfully captured the variation of turbulent flame speed over a wide range of fuel-compositions and turbulence intensities. These results provide evidence that the leading points model can provide useful predictions of turbulent flame speed over a wide range of operating conditions and flow geometries.

20 FOSSIL-FUELED POWER PLANTS↗