Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FILMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Bismuth-Based Perovskite-Inspired Solar Cells: In Situ Diagnostics Reveal Similarities and Differences in the Film Formation of Bismuth- and Lead-Based Films

Organic–inorganic lead-based halide perovskite compounds currently yield thin film solar cells with a power conversion efficiency (PCE) of >23%. However, replacing the lead with less-toxic elements while maintaining a high PCE remains a challenge. For this reason, there has been significant effort to develop Pb-free compounds, including methylammonium bismuth iodide (MA 3 Bi 2 I 9 ), but such systems severely underperform when compared with the prototypical Pb-based methylammonium lead iodide (MAPbI 3 ). For the latter, it is known that lead complexes with polar solvents, such as dimethyl sulfoxide (DMSO) and dimethylformamide (DMF), to form iodoplumbates which can co-crystallize into solvated phases. Herein, the solidification and growth behaviors of Bi- and Pb-based films is investigated using multi-probe in situ characterization methods. It is shown that the Bi-based compound crystallizes directly and rapidly into a textured polycrystalline microstructure from a precursor solution without evolving through intermediate crystalline solvated phases, in contrast to MAPbI 3 . This solidification process produces isolated crystals and challenges the growth of continuous and crystalline films required for solar cells. Further, it is revealed that solvent engineering with antisolvent dripping is crucial to enable the formation of continuous polycrystalline films of MA 3 Bi 2 I 9 and functional solar cells thereof.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Grain Growth in Nanocrystalline Mg-Al Thin Films

An improved understanding of grain growth kinetics in nanocrystalline materials, and in metals and alloys in general, is of continuing interest to the scientific community. In this study, Mg - Al thin films containing ~10 wt.% Al and with 14.5 nm average grain size were produced by magnetron-sputtering and subjected to heat-treatments. The grain growth evolution in the early stages of heat treatment at 423 K (150 °C), 473 K (200 °C) and 573K (300 °C) was observed with transmission electron microscopy and analyzed based upon the classical equation developed by Burke and Turnbull. The grain growth exponent was found to be 7±2 and the activation energy for grain growth was 31.1±13.4 kJ/mol, the latter being significantly lower than in bulk Mg-Al alloys. The observed grain growth kinetics are explained by the Al supersaturation in the matrix and the pinning effects of the rapidly forming beta precipitates and possibly shallow grain boundary grooves. The low activation energy is attributed to the rapid surface diffusion which is dominant in thin film systems.

activation energy↗
DOE OSTI2015

Microstructure and magnetic properties of (001) textured L1(0) FePt films on amorphous glass substrate

L1(0) FePt thin films with an island-like morphology and magnetic perpendicular anisotropy were grown at low temperature (300 < T-dep< 375 degrees C) by magnetron sputtering on Hoya glass substrates using a 30-nm thick Cr (2 0 0) underlayer. An MgO buffer layer with a thickness of 2 nm was used to inhibit the diffusion from the Cr underlayer and promote the growth of (0 0 1) oriented L1(0) FePt films by inducing an in-plane lattice distortion. By varying the substrate temperature and the Ar sputter pressure (3.5 < P-Ar< 15 mTorr) during the deposition, the degree of chemical order, the microstructure and the magnetic properties were tuned and the best properties in term of squareness ratio (M-r/M-s similar to 0.95) and coercive field (H-c similar to 14 kOe) were observed for films deposited at T-dep = 350 degrees C and P-Ar= 5 mTorr, due to the appearance of a tensile strain, which favors the perpendicular anisotropy. The analysis of the angular dependence of remanent magnetization curves on the optimized sample suggests that the magnetization reversal is highly incoherent due to the inter-island interactions. Our results provide useful information on the low temperature growth of FePt films with perpendicular anisotropy onto glass substrates, which are relevant for a variety of technological applications, such as magnetic recording and spintronic devices. (C) 2015 Elsevier B.V. All rights reserved.

Speliotis, T↗
DOE OSTI2016

Nongeminate Radiative Recombination of Free Charges in Cation-Exchanged PbS Quantum Dot Films

Using photoluminescence (PL) spectroscopy we explore the radiative recombination pathways in PbS quantum dots (QDs) synthesized by two methods. We compare conventionally synthesized PbS from a PbO precursor to PbS synthesized using cation-exchange from CdS QDs. We show that strongly coupled films of PbS QDs from the cation-exchange luminesce with significant efficiency at room temperature. This is in stark contrast to conventional PbS QDs, which have exceedingly weak room temperature emission. Moreover, the power dependence of the emission is quadratic, indicating bimolecular radiative recombination that is reasonably competitive with trap-assisted recombination, a feature previously unreported in coupled PbS QD films. We interpret these results in terms of a greatly reduced defect concentration for cation-exchanged QDs that mitigates the influence of trap-assisted recombination. Cation-exchanged QDs have recently been employed in highly efficient and air-stable lead chalcogenide QD devices, and the reduced number of trap states inferred here may lead to improved current collection and higher open circuit voltage.

14 SOLAR ENERGY↗
DOE OSTI2017

Controlled optical properties via chemical composition tuning in molybdenum-incorporated β-Ga 2 O 3 nanocrystalline films

An approach is presented to design refractory-metal incorporated Ga2O3-based materials with controlled structural and optical properties. The molybdenum (Mo)-content in Ga2O3 was varied from 0 to 11 at% in the sputter-deposited Ga-Mo-O films. Molybdenum was found to significantly affect the structure and optical properties. While low Mo-content (≤4 at%) results in the formation of single-phase (β-Ga2O3), higher Mo-content results in amorphization. Chemically-induced band gap variability (Eg~1 eV) coupled with structure-modification indicates the electronic-structure changes in Ga-Mo-O. The linear relationship between chemical-composition and optical properties suggests that tailoring the optical-quality and performance of Ga-Mo-O films is possible by tuning the Mo-content.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2018

A Versatile Thin-Film Deposition Method for Multidimensional Semiconducting Bismuth Halides

Despite the significant progress in fabricating hybrid organic-inorganic lead halide perovskite solar cells, their toxicity and low stability remain as major drawbacks, thereby hindering large-scale commercialization. Given the isoelectronic nature of lead(II) and bismuth(III) ions, potentially stable and non-toxic alternatives for efficient light absorption in thin-film photovoltaic (PV) devices may be found among bismuth-based halide semiconductors. However, high-quality polycrystalline films of many of these systems have not been demonstrated. In this work, we present a versatile and facile two-step co-evaporation approach to fabricate A 3 Bi 2 I 9 (A = Cs, Rb) and AgBi 2 I 7 polycrystalline films with smooth, pin-hole-free morphology and average grain size of > 200 nm. The process involves an initial two-source evaporation step (involving CsI, RbI or AgI, and BiI 3 sources), followed by an annealing step under BiI3 vapor. The structural, optical and electrical characteristics of the resulting thin films are studied by X-ray diffraction, optical spectroscopy, X-ray/UV photoelectron spectroscopy and scanning electron microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Influence of Nonstoichiometry on Proton Conductivity in Thin-Film Yttrium-Doped Barium Zirconate

Proton-conducting perovskites have been widely studied because of their potential application as solid electrolytes in intermediate temperature solid oxide fuel cells. Structural and chemical heterogeneities can develop during synthesis, device fabrication, or service, which can profoundly affect proton transport. Here, we use time-resolved Kelvin probe force microscopy, scanning transmission electron microscopy, atom probe tomography, and density functional theory calculations to intentionally introduce Ba-deficient planar and spherical defects and link the resultant atomic structure with proton transport behavior in both stoichiometric and nonstoichiometric epitaxial, yttrium-doped barium zirconate thin films. The defects were intentionally induced through high-temperature annealing treatment, while maintaining the epitaxial single crystalline structure of the films, with an overall relaxation in the atomic structure. As a result, the annealed samples showed smaller magnitudes of local lattice distortions because of the formation of proton polarons, thereby leading to decreased proton-trapping effect. This resulted in a decrease in the activation energy for proton transport, leading to faster proton transport.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Thin-film nano-thermogravimetry applied to praseodymium-cerium oxide films at high temperatures

High precision measurements of oxygen nonstoichiometry δ in thin film metal oxides M a O b±δ at elevated temperatures and controlled oxygen partial pressures pO2 are reported with the aid of resonant microbalances. The resonant microbalances applied here consisted of y-cut langasite (La 3 Ga 5 SiO 14 ) and CTGS (Ca 3 TaGa 3 Si 2 O 14 ) piezoelectric resonators, operated in the thickness shear mode at ~5 MHz. Measurements of variations in δ of Pr 0.1 Ce 0.9 O 2-δ (PCO) films are reported for the oxygen partial pressure range from 10 –8 bar to 0.2 bar at 700 °C, and these findings were discovered to be in good agreement with previously reported oxygen nonstoichiometry δ data derived from chemical capacitance studies. The PCO thin-films were deposited via pulsed laser deposition on both sides of the resonators, whose series resonance frequency was tracked, converted into mass changes and, finally, into nonstoichiometry. The nonstoichiometry was observed to reach a plateau as the oxygen partial pressure dropped below about 10 –5 bar, the behavior being attributed to the full reduction of Pr to the trivalent state. These resonators enable stable operation up to temperatures above 1000 °C, thereby maintaining high mass resolution suitable for determining oxygen nonstoichiometry variations in thin films deposited on such resonators. Here, for the given experimental conditions, a mass resolution of ~50 ng was achieved at 700 °C with the CTGS resonator.

42 ENGINEERING↗
DOE OSTI2017

Aggregation control in natural brush-printed conjugated polymer films and implications for enhancing charge transport

Shear-printing of electroactive polymers using natural brushes is a promising film deposition technique for printed electronics capable of microstructure control and electrical properties enhancement over large areas. Nevertheless, the interplay between film printing parameters, microstructure development, and charge transport is not well-understood. We report that natural brush-printing greatly enhances charge transport by as much as 5.7× through control of polymer nanofibril aggregate growth and backbone alignment, attributable to the oriented squamae of the natural hair. However, while brush shear-induced aggregation enhances charge transport, we show that backbone alignment alone does not guarantee charge transport anisotropy. These results provide additional understanding of shear-induced enhanced charge transport and set processing guidelines for high-performance printed organic circuitry.

natural brush-printing↗