Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERROMAGNETIC RESONANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Quantifying Spin-Mixed States in Ferromagnets

We quantify the presence of spin-mixed states in ferromagnetic 3D transition metals by precise measurement of the orbital moment. While central to phenomena such as Elliot-Yafet scattering, quantification of the spin-mixing parameter has hitherto been confined to theoretical calculations. We demonstrate that this information is also available by experimental means. Comparison of ferromagnetic resonance spectroscopy with x-ray magnetic circular dichroism results show that Kittel’s original derivation of the spectroscopic g factor requires modification, to include spin mixing of valence band states. Our results are supported by ab initio relativistic electronic structure theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Converse magnetoelectric effects in composites of liquid phase epitaxy grown nickel zinc ferrite films and lead zirconate titanate: Studies on the influence of ferrite film parameters

The interactions among electric and magnetic subsystems in a ferroelectric-ferromagnetic composite occur through mechanical forces. In this work, we discuss results of a systematic investigation on the strength of the magnetic response of the composite to an applied electric field, known as the converse magnetoelectric (CME) effect, and its dependence on the ferroic order parameters and volume fraction for the two phases. Studies were carried out on composites of lead zirconate titanate and 2-30-μm m-thick nickel zinc ferrite (NZFO) films grown by liquid phase epitaxy on lattice matched (100) and (111) MgO substrates. Ferromagnetic resonance was utilized to determine the strength of CME from data on electric field E induced shift in the resonance frequency and its dependence on ferrite film orientation and thickness as well as MgO substrate thickness. The CME coupling coefficient A was found to be a factor of 2 to 4 higher in samples with NZFO films with (100) orientation than for (111) films. A decrease in A was measured with increasing ferrite film thickness and a very significant enhancement in the strength of CME was measured for decreasing MgO thickness. A model for CME that takes into consideration the influence of nonferroic MgO substrate was developed, and estimated A values are in very good agreement with the data. The findings presented here are also of importance for a new class of electric field tunable ferrite microwave devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

First- and second-order magnetic anisotropy and damping of europium iron garnet under high strain

Understanding and tailoring static and dynamic properties of magnetic insulator thin films is important for spintronic device applications. Here, we grow atomically flat epitaxial europium iron garnet (EuIG) thin films by pulsed laser deposition on (111)-oriented garnet substrates with a range of lattice parameters. By controlling the lattice mismatch between EuIG and the substrates, we tune the strain in EuIG films from the compressive to the tensile regime, which is characterized by x-ray diffraction. Using ferromagnetic resonance (FMR), we find that, in addition to the first-order perpendicular magnetic anisotropy which depends linearly on the strain, there is a significant second-order one that has a quadratic strain dependence. Inhomogeneous linewidth of the FMR increases notably with increasing strain, while the Gilbert damping parameter remains nearly constant (≈ 2 × 10 –2 ). Finally, these results provide valuable insight into the spin dynamics in ferrimagnetic insulators and useful guidance for material synthesis and engineering of next-generation spintronics applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Antiferromagnetic Fe Te 2 1 T - phase formation at the Sb 2 Te 3 / Ni 80 Fe 20 interface

Bilayer topological insulator/ferromagnet (TI/FM) heterostructures are promising for spintronic applications due to their low switching energy and therefore power efficiency. Until recently, the reactivity of TI with FM films was overlooked in the spin orbit-torque literature, even though there are reports that it is energetically favorable for TIs to react with transition metals and form interfacial layers. Here, in this study we fabricated a TI/FM heterostructure comprised of molecular beam epitaxy grown Sb 2 Te 3 and DC sputtered Ni 80 Fe 20 . Broadband ferromagnetic resonance revealed spin-pumping evident by the significant enhancement in Gilbert damping, which is likely a signature of the topological surface states or the presence of large spin-orbit-coupling in the adjacent Sb 2 Te 3 . With low-temperature magnetometry, an exchange bias is observed which indicates an exchange interaction between an antiferromagnet (AFM) and an adjacent FM. Cross-section high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) characterization of the Sb 2 Te 3 - Ni 80 Fe 20 bilayer revealed a complex interface showing diffusion of Fe and Ni into the Sb 2 Te 3 film yielding the formation of a FeTe 2 1T-type structural phase. Furthermore, density functional theory calculations revealed that the FeTe 2 1T-phase has an AFM ground state. Due to experimental limitations in the electron energy loss spectroscopy measurements precise chemistry of the interfacial phase could not be determined, therefore it is possible that the FeTe 2 1T and/or an intermixed (Fe 1-x Ni x )Te 2 1T is the AFM interfacial phase contributing to exchange bias in the system. This work emphasizes the chemical complexity of TI/FM interfaces that host novel, metastable magnetic topological phases and require more in-depth studies of other similar interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Unraveling the origin of antiferromagnetic coupling at YIG/permalloy interface

We investigate the structural and electronic origin of antiferromagnetic (AFM) coupling in the yttrium iron garnet (YIG) and permalloy (Ni 80 ⁢Fe 20 , Py) bilayer system at the atomic level. Ferromagnetic resonance (FMR) spectra reveal unique hybrid modes in samples prepared with surface ion milling, indicative of antiferromagnetic exchange coupling at the YIG/Py interface. Using atomic resolution scanning transmission electron microscopy (STEM), we found that AFM coupling appears at the YIG/Py interface of the tetrahedral YIG surface formed with ion milling. Here, the STEM measurements suggest that the interfacial AFM coupling is predominantly driven by an oxygen-mediated superexchange coupling mechanism, which is confirmed by the density-functional theory (DFT) calculations to be energetically favorable. Thus, the combined experimental and theoretical results reveal the critical role of interfacial atomic structure in determining the type of magnetic coupling in a YIG/ferromagnet heterostructure, and prove that the interfacial structure can be experimentally tuned by surface ion milling.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A15 phase Ta 3⁢ Sb thin films: Direct synthesis, charge transport, and spin-orbit torque

Ta 3 ⁢Sb is one of the A15 compounds that have been predicted to have giant spin Hall conductivities due to the gapped Dirac-like band crossings in their electronic structures. We use co-sputtering to directly synthesize thin films of Ta 3 ⁢Sb and identify a large window of Ta:Sb flux ratio that permits the formation of single-phase A15 structure. These sputtered films have an actual Ta:Sb atomic ratio of 4:1, as determined from Rutherford backscattering spectrometry. Their high resistivity, at the Mott-Ioffe-Regel limit, suggests that the electron mean free path is comparable to interatomic distances. From harmonic Hall and spin-torque ferromagnetic resonance measurements, the intrinsic spin Hall conductivity of thin film Ta 3 ⁢Sb is estimated to be in the range of −526 to −1230⁢(ℏ/𝑒)S/cm at 300 K, lower in magnitude than the predicted value of −1400⁢(ℏ/𝑒)S/cm . Here, first-principles calculations of the electronic structure show that the discrepancy is consistent with an increase of the Fermi level due to the nonideal stoichiometry needed to stabilize the A15 structure.

Density functional theory↗
DOE OSTI2014

Tunable Transmission Line With Nanopatterned Thin Films for Smart RF Applications

A concept of tunable transmission line (TL) enabled with nanopatterned ferromagnetic permalloy (Py) and ferroelectric lead zirconium titanate (PZT) thin films is presented. The permittivity (εr) of PZT is electrical tunable with dc voltage, and the permeability (μr) of Py is electrical tunable with dc current, thus simultaneous electric tunable capacitance and inductance capability are provided for the proposed TL. The proposed TL has been fabricated and compared with a regular line without nanofilm patterns. Py is patterned with the dimensions of 10 μm × 150 nm and thickness of 100 nm for high built-in anisotropy field. The ferromagnetic resonant frequency is measured to be 6.3 GHz. Compared with the regular TL, the implemented TL has only generated 0.05 dB additional insertion loss at 4 GHz. The electrical tunability of both the capacitance and the inductance has been demonstrated for the first time. By applying the varied dc current (0–150 mA) and the dc voltage (0–20 V), measured results have shown that the proposed line can provide 90° phase shift from 3.75 to 4 GHz with the fixed characteristic impedance. The continuous tuning of the characteristics impedance from 59 to 61 under suitable bias conditions shows its promise as an impedance matching network. Tunable range of both the phase shifter and the impedance matching network can be further increased with thicker and multilayer films.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Voltage-driven, local, and efficient excitation of nitrogen-vacancy centers in diamond

Magnetic sensing technology has found widespread application in a diverse set of industries including transportation, medicine, and resource exploration. These uses often require highly sensitive instruments to measure the extremely small magnetic fields involved, relying on difficult-to-integrate superconducting quantum interference devices and spin-exchange relaxation-free magnetometers. A potential alternative, nitrogen-vacancy (NV) centers in diamond, has shown great potential as a high-sensitivity and high-resolution magnetic sensor capable of operating in an unshielded, room-temperature environment. Transitioning NV center–based sensors into practical devices, however, is impeded by the need for high-power radio frequency (RF) excitation to manipulate them. We report an advance that combines two different physical phenomena to enable a highly efficient excitation of the NV centers: magnetoelastic drive of ferromagnetic resonance and NV-magnon coupling. Our work demonstrates a new pathway that combine acoustics and magnonics that enables highly energy-efficient and local excitation of NV centers without the need for any external RF excitation and, thus, could lead to completely integrated, on-chip, atomic sensors.

42 ENGINEERING↗
DOE OSTI2019

Large spin-orbit torque efficiency enhanced by magnetic structure of collinear antiferromagnet IrMn

Spin-orbit torque (SOT) offers promising approaches to developing energy-efficient memory devices by electric switching of magnetization. Compared to other SOT materials, metallic antiferromagnet (AFM) potentially allows the control of SOT through its magnetic structure. Here, combining the results from neutron diffraction and spin-torque ferromagnetic resonance experiments, we show that the magnetic structure of epitaxially grown L1 0 -IrMn (a collinear AFM) is distinct from the widely presumed bulk one. It consists of twin domains, with the spin axes orienting toward [111] and [–111], respectively. This unconventional magnetic structure is responsible for much larger SOT efficiencies up to 0.60 ± 0.04, compared to 0.083 ± 0.002 for the polycrystalline IrMn. Furthermore, we reveal that this magnetic structure induces a large isotropic bulk contribution and a comparable anisotropic interfacial contribution to the SOT efficiency. Our findings shed light on the critical roles of bulk and interfacial antiferromagnetism to SOT generated by metallic AFM.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Magnetic Resonance in Gadolinium Nanoparticles near the Curie Point

The Influence of temperature in the range from 275 to 320 K on ESR spectra and magnetization m of ensembles of spherical gadolinium nanoparticles with the diameter from 89 to 18 nm was studied. The particles with d = 18 nm had a cubic face centered structure and no magnetic transition. At T > T{sub C} all particles were paramagnetic, and their g factors were g = 1.98 ± 0.02 irrespective of their size and structure. At T = T{sub C} the particles having 28 to 89 nm in size experienced a magnetic and orientation transition; at T < T{sub C} their m(H) dependences were described by the Langevin function, and the FMR lines broadened and shifted towards H = 0. FMR lines of the Gd particle ensembles showed a hysteresis behavior during magnetization reversal, which did not correlate with the coercivity of the particles. Dependences of the Gd nanoparticles FMR linewidth ΔH(T) changed proportionally to |T–T{sub C}|.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Brain-computer interfaces enabled by novel magnetometers (CRADA FP00007655 Final Report))

The work primarily focused on improving performance of magnetometers based on Acoustically Driven Ferromagnetic Resonance (ADFMR) as well as exploring and evaluating the market opportunities for such devices. Over the two year program, we were able to improve magnetometer performance by a factor of over 1000X, and were able to demonstrate the feasibility of scaling down a bench-scale implementation by developing a 4” x 4” printed circuit board (PCB) prototype. These advancements were achieved by making substantial improvements both in the core sensor technology as well as the detection circuitry that allows for readout of the sensor module.

42 ENGINEERING↗
DOE OSTI2016

Spin Hall effects in metallic antiferromagnets – perspectives for future spinorbitronics

We investigate angular dependent spin-orbit torques from the spin Hall effect in a metallic antiferromagnet using the spin-torque ferromagnetic resonance technique. The large spin Hall effect exists in PtMn, a prototypical CuAu-I-type metallic antiferromagnet. By applying epitaxial growth, we previously reported an appreciable difference in spin-orbit torques for c- and a-axis orientated samples, implying anisotropic effects in magnetically ordered materials. In this work we demonstrate through bipolar-magnetic-field experiments a small but noticeable asymmetric behavior in the spin-transfer-torque that appears as a hysteresis effect. We also suggest that metallic antiferromagnets may be good candidates for the investigation of various unidirectional effects related to novel spin-orbitronics phenomena.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Lunar sample analysis

A simple and convenient method of making quantitative magnetic separations of the lunar fines is described. The fractions obtained form groups containing distinctively different particle types; thus it appears that magnetic separation in itself may be a useful way of characterizing lunar fines. Mossbauer studies of fines 10084 show that the metal can not contain more than about 1.5% Ni implying that by far the bulk of it results from reduction rather than being a direct meteoritic addition. Mossbauer data also places an upper limit on the magnetite content of the fines at least an order of magnitude below that required to account for the characteristic ferromagnetic resonance observed. Microscopic examination of magnetic separates from the 15101 fines suggests that reduction of Fe accompanies every major impact event on the moon and also suggests that the bulk of the material at the collection site has at one time been in an impact plume.

Housley, R. M.↗
NASA NTRS1974

Solar wind and micrometeorite alteration of the lunar regolith

Developments in the understanding of reduction processes which occur in the lunar regolith as a result of solar-wind bombardment and micrometeorite impacts are discussed. The mechanism is described by which water released during reduction is removed from the lunar surface, and the possible contribution of solar-wind sputtering to the reduction process is considered. It is shown that the overall reduction efficiency of incoming hydrogen ions may reach several per cent, which is sufficient to produce all the metallic iron observed in the regolith. Mossbauer spectroscopic data on the amount of metallic iron present as isolated atoms or small clusters in reduced grain surfaces are presented together with data on the metallic iron content of fines samples obtained by Mossbauer spectroscopy, ferromagnetic resonance, and scanning as well as transmission electron microscopy. A portable magnetic probe is described which has been designed for determining surface-exposure age profiles in intact lunar core and drive-tube samples.

Housley, R. M.↗
NASA NTRS1975

FMR thermomagnetic studies up to 900 C of lunar soils and potential magnetic analogues

Using a recently developed furnace, ferromagnetic resonance (FMR) thermomagnetic studies up to 900 C were employed to measure the Curie points of the superparamagnetic (SP) and single domain (SD) particles in lunar soils and potential magnetic analogue materials. Based on measured Curie points of 775 C, the SP and SD particles in lunar soils 10084-853, 12070-29, 14161-46, and 67010-4 are essentially pure metallic Fe. Synthetic and terrestrial samples containing magnetite, titanomaghemites, and magnetite-like particles have measured Curie points below 600 C are thus not magnetic analogues of lunar soils.

Morris, R. V.↗
NASA NTRS1976

Comparative studies of grain size separates of 60009

Five samples from 60009, the lower half of a double drive tube, were analyzed via grain-size methods, with particle types classified and counted in the coarser grain sizes. Studies were undertaken of particle types and distributions by petrographic methods, of magnetic fractions, of the size splits and magnetic splits as analyzed by ferromagnetic resonance (FMR) techniques, of maturity (based on agglutinate content, FMR index Is/FeO, mean size of sub-cm material, magnetic fraction), of possible reworking or mixing in situ, and of depositional history. Maturity indices are in substantial agreement for all of the five samples. Strong positive correlation of percent agglutinates and percent bedrock-derived lithic fragments, combined with negative correlation of those components with percent single crystal plagioclase, argue against in situ reworking of the same soil.

Mckay, D. S.↗
NASA NTRS1978

Lunar sample analysis

Flameless atomic abosrption, X-ray photoemission spectroscopy, ferromagnetic resonance, scanning electron microscopy, and Moessbauer spectroscopy were used to investigate the evolution of the lunar regolith, the transport of volatile trace metals, and the surface composition of lunar samples. The development of a model for lunar volcanic eruptions is also discussed.

Housley, R. M.↗
NASA NTRS1977

Depositional history of the Apollo 16 deep drill core

Ferromagnetic resonance and magnetic hysteresis loop measurements were performed on 212 samples from the Apollo 16 deep drill core. The total iron content is generally uniform with a mean value of 5.7 plus or minus 0.9 wt%. The soils range in maturity from immature to mature. Two major contacts were observed. The contact at 13 cm depth represents a fossil surface whereas the contact at 190 cm depth has no time-stratigraphic significance. The data suggest that the core section below 13 cm depth was deposited in a single impact event and subjected to meteoritic gardening for about 450 m.y. However, our data do not preclude deposition by a series of closely spaced events. About 50 m.y. ago, the top 13 cm were added. Comparison with the Apollo 16 double drive tube 60009/60010 does not yield any evidence for a stratigraphic correlation with the deep drill core.

Gose, W. A.↗