Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FAIR data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

A materials data framework and dataset for elastomeric foam impact mitigating materials

The availability of materials data for impact-mitigating materials has lagged behind applications-based data. For example, data describing on-field helmeted impacts are available, whereas material behaviors for the constituent impact-mitigating materials used in helmet designs lack open datasets. Here, we describe a new FAIR (findable, accessible, interoperable, reusable) data framework with structural and mechanical response data for one example elastic impact protection foam. The continuum-scale behavior of foams emerges from the interplay of polymer properties, internal gas, and geometric structure. This behavior is rate and temperature sensitive, therefore, describing structure-property characteristics requires data collected across several types of instruments. Data included are from structure imaging via micro-computed tomography, finite deformation mechanical measurements from universal test systems with full-field displacement and strain, and visco-thermo-elastic properties from dynamic mechanical analysis. These data facilitate modeling and design efforts in foam mechanics, e.g., homogenization, direct numerical simulation, or phenomenological fitting. The data framework is implemented using data services and software from the Materials Data Facility of the Center for Hierarchical Materials Design.

36 MATERIALS SCIENCE↗

Indications of a shallow potential in {sup 48}Ca+{sup 96}Zr fusion reactions

Fusion data for {sup 48}Ca+{sup 96}Zr are analyzed by coupled-channels calculations. Puzzling features of a previous analysis are eliminated by applying a potential that has a shallow pocket in the entrance channel. Thus the observed S factor for fusion, which develops a maximum at low energy, can be reproduced fairly well. The high-energy data can also be accounted for but that requires the use of a weak, short-ranged imaginary potential that absorbs the incoming flux near the location of the minimum of the potential pocket. Predictions of the fusion hindrance in other Ca+Zr systems are made and are compared with the systematics that has been developed previously.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Making Dataset Quality Information FAIR: Supporting Open-Source Science and Enhancing (Re)Use and Trustworthiness of Scientific Data

- Quality information should be documented and readily shared within and across domains. - Sharing of dataset quality information supports open science and trustworthiness of scientific data. - Dataset quality is more than data quality. - Quality tends to be domain-specific and context-dependent. - Community guidelines provide practical steps towards FAIR dataset quality information.

Ge Peng↗

A high-fidelity N-body ephemeris generator for satellites in Earth orbit

A program is currently used for mission planning called the Analytic Satellite Ephemeris Program (ASEP), which produces projected data for orbits that remain fairly close to Earth. Lunar and solar perturbations are taken into account in another program called GRAVE. This project is a revision of GRAVE which incorporates more flexible means of input for initial data, provides additional kinds of output information, and makes use of structured programming techniques to make the program more understandable and reliable. The computer program ORBIT was tested against tracking data for the first 313 days of operation of the CRRES satellite. A sample graph is given comparing the semi-major axis calculated by the program with the values supplied by NORAD. When calculated for points at which CRRES passes through the ascending node, the argument of perigee, the right ascension of the ascending node, and the mean anomaly all stay within about a degree of the corresponding values from NORAD; the inclination of the orbital plane is much closer. The program value of the eccentricity is in error by no more than 0.0002.

Simmons, David R.↗

A high-fidelity satellite ephemeris program for Earth satellites in eccentric orbits

A program for mission planning called the Analytic Satellite Ephemeris Program (ASEP), produces projected data for orbits that remain fairly close to the Earth. ASEP does not take into account lunar and solar perturbations. These perturbations are accounted for in another program called GRAVE, which incorporates more flexible means of input for initial data, provides additional kinds of output information, and makes use of structural programming techniques to make the program more understandable and reliable. GRAVE was revised, and a new program called ORBIT was developed. It is divided into three major phases: initialization, integration, and output. Results of the program development are presented.

Simmons, David R.↗

Database Design Strategies for Coordinated Simulation and Testing in Additive Manufacturing

The qualification and certification (Q&C) process presents a significant challenge for widespread adoption of additive manufacturing (AM) materials and processes for aerospace applications. A relational database framework will be presented as a tool for data curation of coordinated experimental and computational materials modeling research activities. A comparison of relational and hierarchical data structures in this domain will be emphasized through the evolution of a database design strategy. This framework’s mission is to support the advancement of computational materials-informed Q&C by providing the necessary data infrastructure to trace reliability and reproducibility measures through unified AM materials simulation and experimental testing. FAIR (findable, accessible, interoperable, and reusable) data will be highlighted as a necessary precursor for automation of specific actions, which ultimately reduces the time and expense burden for Q&C. The discussion will be mostly limited to back-end design elements, though a few front-end user experience examples will also be shared.

Qualification↗

Application of HCMM data to regional geologic analysis for mineral and energy resource evaluation

Experimentation with several potentially promising techniques led to the selection of a fairly simple scheme for registration of data from the HCMM using an affine transformation. A method based solely on remote sensing was developed to estimate those meteorological effects which are required for thermal inertia mapping. It assumes that the atmospheric fluxes are spatially invariant and that the solar, sky and sensible heat fluxes can be approximated by a simple mathematical form. Coefficients are determined from least squares method by fitting observational data to the thermal model.

Watson, K.↗

Experimental Investigation of Average Heat-Transfer and Friction Coefficients for Air Flowing in Circular Tubes Having Square-Thread-Type Roughness

An investigation of forced-convection heat transfer and associated pressure drops was conducted with air flowing through electrically heated Inconel tubes having various degrees of square-thread-type roughness, an inside diameter of 1/2 inch, and a length of 24 inches. were obtained for tubes having conventional roughness ratios (height of thread/radius of tube) of 0 (smooth tube), 0.016, 0.025, and 0.037 over ranges of bulk Reynolds numbers up to 350,000, average inside-tube-wall temperatures up to 1950deg R, and heat-flux densities up to 115,000 Btu per hour per square foot. Data The experimental data showed that both heat transfer and friction increased with increase in surface roughness, becoming more pronounced with increase in Reynolds number; for a given roughness, both heat transfer and friction were also influenced by the tube wall-to-bulk temperature ratio. Good correlation of the heat-transfer data for all the tubes investigated was obtained by use of a modification of the conventional Nusselt correlation parameters wherein the mass velocity in the Reynolds number was replaced by the product of air density evaluated at the average film temperature and the so-called friction velocity; in addition, the physical properties of air were evaluated at the average film temperature. The isothermal friction data for the rough tubes, when plotted in the conventional manner, resulted in curves similar to those obtained by other investigators; that is, the curve for a given roughness breaks away from the Blasius line (representing turbulent flow in smooth tubes) at some value of Reynolds number, which decreases with increase in surface roughness, and then becomes a horizontal line (friction coefficient independent of Reynolds number). A comparison of the friction data for the rough tubes used herein indicated that the conventional roughness ratio is not an adequate measure of relative roughness for tubes having a square-thread-type element. The present data, as well as those of other investigators, were used to isolate the influence of ratios of thread height to width, thread spacing to width, and the conventional roughness ratio on the friction coefficient. A fair correlation of the friction data was obtained for each tube with heat addition when the friction coefficient and Reynolds number were defined on the basis of film properties; however, the data for each tube retained the curve characteristic of that particular roughness. The friction data for all the rough tubes could be represented by a single line for the complete turbulence region by incorporating a roughness parameter in the film correlation. No correlation was obtained for the region of incomplete turbulence.

Sams, E. W.↗

Incorporating TRMM and Other High-Quality Estimates into the One-Degree Daily (1DD) Global Precipitation Product

The One-Degree Daily (1DD) precipitation dataset was recently developed for the Global Precipitation Climatology Project (GPCP). The IDD provides a globally-complete, observation-only estimate of precipitation on a daily 1 deg x 1 deg grid for the period 1997 through late 1999 (by the time of the conference). In the latitude band 40 N - 40 S the IDD uses the Threshold-Matched Precipitation Index (TMPI), a GPI-like IR product with the T(sub b) threshold and (single) conditional rain rate determined locally for each month by the frequency of precipitation in the GPROF SSNU product and by the precipitation amount in the GPCP satellite-gauge (SG) combination. Outside 40 N - 40 S the 1DD uses a scaled TOVS precipitation estimate that has adjustments based on the TMPI and the SG. This first-generation 1DD has been in beta test preparatory to release as an official GPCP product. In this paper we discuss further development of the 1DD framework to allow the direct incorporation of TRMM and other high-quality precipitation estimates. First, these data are generally sparse (typically from low-orbit satellites), so a fair amount of work was devoted to data boundaries. Second, these data are not the same as the original 1DD estimates, so we had to give careful consideration to the best scheme for forcing the 1DD to sum to the SG for the month. Finally, the non-sun-synchronous, low-inclination orbit occupied by TRMM creates interesting variations against the sun-synchronous, high-inclination orbits occupied by the Defense Meteorological Satellite Program satellites that carry the SSM/I. Examples will be given of each of the development issues, then comparisons will be made to daily raingauge analyses.

Huffman, George J.↗

Effects of Data Quality on the Characterization of Aerosol Properties from Multiple Sensors

Cross-comparison of aerosol properties between ground-based and spaceborne measurements is an important validation technique that helps to investigate the uncertainties of aerosol products acquired using spaceborne sensors. However, it has been shown that even minor differences in the cross-characterization procedure may significantly impact the results of such validation. Of particular consideration is the quality assurance I quality control (QA/QC) information - an auxiliary data indicating a "confidence" level (e.g., Bad, Fair, Good, Excellent, etc.) conferred by the retrieval algorithms on the produced data. Depending on the treatment of available QA/QC information, a cross-characterization procedure has the potential of filtering out invalid data points, such as uncertain or erroneous retrievals, which tend to reduce the credibility of such comparisons. However, under certain circumstances, even high QA/QC values may not fully guarantee the quality of the data. For example, retrievals in proximity of a cloud might be particularly perplexing for an aerosol retrieval algorithm, resulting in an invalid data that, nonetheless, could be assigned a high QA/QC confidence. In this presentation, we will study the effects of several QA/QC parameters on cross-characterization of aerosol properties between the data acquired by multiple spaceborne sensors. We will utilize the Multi-sensor Aerosol Products Sampling System (MAPSS) that provides a consistent platform for multi-sensor comparison, including collocation with measurements acquired by the ground-based Aerosol Robotic Network (AERONET), The multi-sensor spaceborne data analyzed include those acquired by the Terra-MODIS, Aqua-MODIS, Terra-MISR, Aura-OMI, Parasol-POLDER, and CalipsoCALIOP satellite instruments.

Petrenko, Maksym↗

Transfer strengths to the 0{sup +} states excited by (p,t) reactions in {sup 130,132,134}Ba

The aim of this work is to calculate the transfer strengths to the excited 0{sup +} states in {sup 130,132,134}Ba which have been identified in (p,t) reactions and to investigate their related properties. For this purpose, we have used a model Hamiltonian which includes monopole pairing, quadrupole-quadrupole, and spin-quadrupole interactions. The model Hamiltonian has been diagonalized with the random phase approximation (RPA). To investigate the general trend of the transfer strengths to the excited 0{sup +} states, two-nucleon transition intensities relative to the transition to the ground state and their cumulative values have been calculated versus energy and compared with the data. The comparisons revealed that fairly good results for the distribution of the energies and the transfer strengths have been obtained. For almost all nuclei, the cumulative values of the transfer strengths were nicely predicted. Moreover, qualitatively, a parallel result that agrees with the data and the prediction of the O(6) limit of the IBM model which is a weak excitation for the first 0{sup +} state and a strong one for the second 0{sup +} state has been obtained for {sup 130}Ba and {sup 132}Ba.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reduction of hub- and pylon-fairing drag

A wind tunnel test was conducted to obtain data on several drag reduction methods for rotorcraft hubs. The objective of the test was to use small-scale models to develop the technology to substantially reduce hub drag. A helicopter test model, which did not incorporate a rotor, was used to study single-rotor fairing configurations. The rotor shaft assembly was modeled with nonrotating hardware. Drag trend data was obtained for the following fairing configuration changes: hub-fairing camber, hub-fairing thickness ratio, hub-fairing surface curvature, hub-fairing height with respect to the fuselage, inclusion of blade shanks in the hub fairings, hub- and pylon-fairing gaps, pylon-fairing cross-sectional geometry, pylon-fairing thickness ratio and camber. Substantial drag reductions could potentially result from application of the test results to helicopter hub- and pylon-fairing design.

Young, Larry A.↗

Aspects of the normal state resistivity of cuprate superconductors

Planar normal state resistivity data taken from three families of cuprate superconductors are compared here with theoretical calculations from the recent extremely correlated Fermi liquid theory (ECFL). The two hole doped cuprate materials LSCO and BSLCO and the electron doped material LCCO have yielded rich data sets at several densities δ and temperatures T, thereby enabling a systematic comparison with theory. The recent ECFL resistivity calculations for the highly correlated t-t'-J model by us give the resistivity for a wide set of model parameters. After using X-ray diffraction and angle resolved photoemission data to fix parameters appearing in the theoretical resistivity, only one parameter, the magnitude of the hopping t, remains undetermined. For each data set, the slope of the experimental resistivity at a single temperature-density point is sufficient to determine t, and hence the resistivity on absolute scale at all remaining densities and temperatures. This procedure is demonstrated to give a fair account of the entire data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Prospects for (non-SUSY) new physics with first LHC data

The ATLAS and CMS experiments will take first data soon. I consider here the prospects for new physics (excluding SUSY) with a few fb{sup -1} of data. This means processes with signal cross sections of a few 100 fb or less, with clear and fairly simple signatures--precision comparison of data to Standard Model tails will take longer, needing more luminosity and very good understanding of detector calibrations, resolutions and trigger efficiencies. The approach I take here is signature rather than model based, but examples of models will be given.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sesame Equation of State Number 2100 for Scandium

An equation of state (EOS) for scandium has been constructed using the OpenSesame code and was placed in the SESAME library as material number 2100. The cold curve was constructed with a Mie-Grüneisen model fitted to the high pressure Hugoniot data and to the zero pressure bulk sound speed, the nuclear contribution was calculated from JD Johnson nuclear model and the electronic thermal contribution from the Thomas-Fermi-Dirac statistical model. The EOS behaves reasonably well over a wide range of densities, pressures and temperatures, and compares fairly with the available experimental data. Of the 5 solid phases present in scandium at room temperature, however, only the first one, the hcp phase, is assumed to occur. Also the transition to bcc at room pressure just before melting is ignored. We plan to construct a multiphase EOS as the next step. The purpose of the present calculation was mostly for learning purposes, as is reflected by the way the report is written.

36 MATERIALS SCIENCE↗

SCC Aerosol Transport Model Summary Report

The purpose of the present work is to introduce a generic and reliable numerical model for prediction of aerosol transport, deposition, and plugging in leak paths similar to stress corrosion cracks while accounting for potential plugging formation. The model is dynamic (changing leak path geometry due to plugging) and it relies on the numerical solution of the aerosol transport equation in one dimension using finite differences. An extensive validation exercise (particle diameters: 0.01-10 μm and pressure difference up to 12 kPa) was conducted based on comparisons with experimental and theoretical data. The developed model is fairly general since it is based on a generic mechanistic description of the aerosol flow and particle deposition in the leak path, without requiring experimental fittings other than using the leak rate parameters commonly available in practical applications. Despite the approximate agreement of the model with the experimental data, the obtained predictions can be qualified as realistic. This is a major achievement of the model, which has been based on generic aerosol mechanics with no reference or adjustment to experimental data.

42 ENGINEERING↗

NASA biological and physical sciences databases: who’s the FAIRest of them all?

Conceptual models are a key part of the foundation of scientific study. Scientific data discovery and retrieval are often inaccurate and incomplete because these models are not sufficiently well-incorporated into data retrieval systems. Systems often don’t provide the necessary tools to those producing scientific data to fully and unambiguously annotate them and the result is consumers of the data cannot find them efficiently. The capability of data archives to provide these tools to link data to underlying conceptual models is one of dimensions of the recently developed “FAIR” principles (https://www.go-fair.org/fair-principles/ ), and is key to many automated processes being able to operate on these data, particularly analytics involving artificial intelligence. We used an open-source web service to measure the FAIR compliance of the three data archives operated by NASA for the biological and physical sciences: the Life Sciences Data Archive, the Physical Sciences Informatics database, and GeneLab. The service ingests references to data sets in these archives, and then executes domain-non-specific examinations of these data and metadata that test compliance to the FAIR principles. Of the 22 metrics tested, GeneLab passed 11 (50%), and PSI and LSDA each passed 7 (32%). These data were gathered using only one representative data set from each archive and we anticipate variability in results as we continue to apply these metrics to other data. A preliminary study of the failure traces for each metric suggests there is a wide range of effort and complexity in the enhancements required for each system to elevate FAIR compliance, and this is the subject of continued investigation. This information has been and will likely continue to be important information in planning these enhancements, with the goal of increased readiness of the data for automated processes.

database↗

Alaska's Rural Building Stock: a Validation Study Using ResStock and Field Data

The availability of accurate national data on demographics, building stock, and energy use is vital for modeling residential buildings and evaluating decarbonization strategies. However, rural and Indigenous populations, including those in rural Alaska, are typically underrepresented in these datasets. These communities face unique challenges due to their remote locations, severe weather conditions, and limited access to resources, resulting in high energy burden. This report examines how rural Alaskan communities are underrepresented in the ResStock housing model and highlights the need for improved data to address their unique housing and energy challenges. Thus, this report examines the representation of rural Alaskan communities within the national housing stock model, ResStock. A validation study was conducted, considering ResStock, Field Data and Aerial and 3D-view data collection (A3DDC) datasets. The validation process started by using the down selecting approach on the ResStock building stock dataset. For the purpose of this study, only the rural Alaska Boroughs and Census areas located in ASHRAE IECC Climate Zone 8 were considered to ensure a more accurate and fair comparison with the field data, which was collected in rural areas located in climate zone 8, specifically within the Nome Census area. While ResStock may accurately represent several characteristics of the building stock for rural Alaska, some differences between modeled, field data, and aerial and 3D-view data collection datasets were identified. The following building characteristics have a high impact on modeled energy consumption and demonstrated large differences: Revisit heating setpoints and consider a substantially higher setpoint distribution, it could potentially address "missing loads" if this is the case. Develop and include Toyo heating in future modeling for ResStock and EnergyPlus. Remove natural gas as a water heater fuel type outside of North Slope County. Foundation type updated to have more crawlspaces rather than basements. Infiltration rates need reexamination for a larger distribution toward higher infiltration rates. Include more vinyl and less brick in exterior wall type and revise wall color for greater proportion of light rather than dark color. Roof material revised from majority shingles to majority metal. Update number of occupants to higher number of occupant count. Building orientation represents a higher proportion of south facing buildings rather than relatively equal. The findings suggest that updating ResStock's probability logic could better represent rural Alaskan buildings. ResStock can be utilized to identify the best upgrades or energy efficiency and energy efficiency improvements, helping community leaders in making more informed decisions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗