Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ErTe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Mapping of soil banks using ERTS-1 pictures

Earth Resources Technology Satellite (ERTS-1) pictures of different wavelengths (MSS 4,5,6,7) were used in the study of two strip mine areas in southeastern Ohio. The first area was near Piedmont Lake and the second area was near New Lexington. Prints were examined under a binocular microscope and the gray tone was correlated with the actual ground conditions at several sites. For the New Lexington area, color infrared pictures taken at an elevation of 18,000 feet were also used for correlation with the ERTS-1 imagery. The results indicate that MSS 5 and 7 are most useful in defining the stripped land and show that the hydrological and soil characteristics are remarkably different than the surrounding lands.

Ahmad, M. U.↗

Air quality indices from ERTS-1 MSS information

Comparison between ground based atmospheric turbidity network measurements and the average scene grayness from MSS Channel 4 data is in progress. Correlation between these two sources is promising. If continued correlation occurs for other ERTS-1 overflight dates and ground test sites, a new operational use of ERTS-1 useful to Federal, state, and international organizations will become available.

Riley, E. L.↗

Snow cover surveys in Alaska from ERTS-1 data

September and October ERTS scenes have been analyzed to delineate snow cover patterns in northern Alaska's Brooks Range and on Mt. Wrangell, and active volcano in South Central Alaska. ERTS images demonstrate that the snow on the northern foothills of the Brooks Range are significantly more affected by katabatic wind action than are the southern foothills. Aufeis deposits along arctic rivers also can be identified in late summer. A survey of such aufeis deposits could identify additional summertime sources of fresh water supplies. Images of Mt. Wrangell permit monitoring of the interaction between volcanic heat and the mass balance of glaciers that exist on active volcanoes. Temporal changes in the areas of bare rock on the rim of the caldera on the summit reveal significant melting of new snow from an extensive storm on August 18. Digital analysis of data from subsequent passes over the summit on September 7, 23 and 24 revealed considerable bare rock exposed by melting, which is virtually impossible from solar heating at this altitude and date.

Benson, C. S.↗

Utilization of ERTS-1 data to monitor and classify eutrophication of inland lakes

A technique is being developed for use of ERTS in estimating and monitoring trophic levels of inland lakes. Preliminary findings are that Michigan lakes and ponds of one acre or more are resolvable in bands 5, 6 and 7 of NASA MSS imagery under fair conditions (haze and 70% cloud cover). In processed imagery (CCT) smaller features, including water color patterns, are evident within some lakes of 40 acres or more. Image distortion of lake size, shape, orientation, etc. is minimal; discrimination of lakes and ponds from various wetlands is good. Subsequent ERTS and aircraft imagery will be correlated with detailed ground truth of water color and quality in eutrophic test lakes.

Chase, P. E.↗

ERTS-1 observes algal blooms in Lake Erie and Utah Lake

During late summer when the surface waters of Lake Erie reach their maximum temperature an algal bloom is likely to develop. Such phenomena have been noticed on other shallow lakes using ERTS-1 and characterize eutrophic conditions. The concentration of the algae into long streamers provides additional information on surface circulations. To augment the ERTS-1 MSS data of Lake Erie an aircraft was flown to provide correlative thermal-IR and additional multiband photographs. The algal bloom is highly absorptive in the visible wavelengths but reverses contrast with the surrounding water in the near-IR bands. The absorption of shortwave energy heats the dark brown algal mass, providing a hot surface target for the thermal-IR scanner.

Strong, A. E.↗

Precision annotation of predetermined primary sampling units on ERTS-1 MSS images

Resectioning programs were developed for projecting the boundary corners of sample units, management units, and counties into U2 RC-10 and ERTS-1 MSS images. The technique used includes corrections for earth curvature, terrain elevation, and MSS distortions. The minimum standard error obtained was about 0.15 mm or 150 meters on the ground. This technique now makes it possible to include land ownership as an integral part of forest resource sampling plans using ERTS imagery.

Vanroessel, J. W.↗

Application of ERTS-1 imagery in coastal studies

The basic ERTS output is four black-and-white photographs presenting the same scene recorded in each multispectral scanner band. Mosaics covering large regions at a 1:250,000 scale can be compiled from these photographs. Office study of the image of each band separately, in combination with other bands, and in conjunction with other available data (navigation charts, tide tables, etc.) permits extraction of data useful in coastal engineering planning and coastal processes studies. Specific examples in which significant information on regional shoreline configuration or nearshore water movements has been obtained from unenhanced ERTS imagery are: (1) tidal inlet configuration; (2) navigation information; and (3) nearshore water movements.

Magoon, O. T.↗

Detection of turbidity dynamics in Tampa Bay, Florida using multispectral imagery from ERTS-1

In 1970, Congress authorized the deepening of the Tampa Bay channel (Rivers and Harbors Act of 1970) from 34 to 44 feet. In order to determine the effects of this deepening on circulation, water quality, and biota, during and after the construction, the U.S. Geological Survey, in cooperation with the Tampa Port Authority, has collected data and developed a digital simulation model of the bay. In addition to data collected using conventional tools, use is being made of data collected from ERTS-1. Return beam vidicon (RBV) multispectral data were collected, while a shell dredging barge was operating in the bay, and used for turbidity recognition and unique spectral signatures representative of type and amount of material in suspension. A three-dimensional concept of the dynamics of the plume was achieved by superimposing the parts of the plume recognized in each RBV band. This provides a background for automatic computer processing of ERTS data and three-dimensional modeling of turbidity plumes.

Coker, A. E.↗

Identification and Mapping of Soils, Vegetation, and Water Resources of Lynn County, Texas, by Computer Analysis of ERTS MSS Data

Results of the analysis and interpretation of ERTS multispectral data obtained over Lynn County, Texas, are presented. The test site was chosen because it embodies a variety of problems associated with the development and management of agricultural resources in the Southern Great Plains. Lynn County is one of ten counties in a larger test site centering around Lubbock, Texas. The purpose of this study is to examine the utility of ERTS data in identifying, characterizing, and mapping soils, vegetation, and water resources in this semiarid region. Successful application of multispectral remote sensing and machine-processing techniques to arid and seminarid land-management problems will provide valuable new tools for the more than one-third of the world's lands lying in arid-semiarid regions.

Baumgardner, M. F.↗

Application of ERTS-1 Imagery to Flood Inundation Mapping

Ground data and a variety of low-altitude multispectral imagery were acquired for the East Nishnabotna River on September 14 and 15. This successful effort concluded that a near-visible infrared sensor could map inundated areas in late summer for at least three days after flood recession. ERTS-1 multispectral scanner subsystem (MSS) imagery of the area was obtained on September 18 and 19. Analysis of MSS imagery by IGSRSL, USGS, and NASA reinforced the conclusions of the low-altitude study while increasing the time period critical for imagery acquisition to at least 7 days following flood recession. The capability of satellite imagery to map late summer flooding at a scale of 1:250,000 is exhibited by the agreement of interpreted flood boundaries obtained from ERTS-1 imagery to boundaries mapped by low-altitude imagery and ground methods.

Hallberg, G. R.↗

Application of ERTS-1 Data to Aid in Solving Water Resources Management Problems in the State of California

Investigations within the State of California have emphasized the direct utilization of the supplemental data source afforded by the Earth Resources Technology Satellite-1 (ERTS-1) imagery. A user-oriented study has been underway for several years to identify and develop application methodology for remotely sensed information available from several platform levels, including low and high flights by NASA's U2 aircraft, and other manned and unmanned devices. The University of California has pursued both basic and applied research in remote sensing, through ongoing studies supported by NASA, and in cooperation with state agencies responsible for water resources and related fields. This report reviews the applications of ERTS-1 and supplementary imagery sources applicable to water resources planning, operations, and management.

Burgy, R. H.↗

Application of ERTS Results to Land and Resource Management in the State of Mississippi

The application of ERTS-1 data to land and resource management in the State of Mississippi is discussed. Land use maps using various types of photographic imagery are provided to describe the nature of the engineering projects being conducted. Examples of forest maps and wildlife habitat maps are included. Some of the problems involved in applying the ERTS imagery to specific activities are reported.

Bankston, P. T.↗

To evaluate ERTS-1 data for usefulness as a geological sensor in the diverse geological terraines of New York State

The author has identified the following significant results. Linear anomalies dominate the new geological information derived from ERTS-1 imagery, total lengths now exceeding 6000 kms. Experimentation with a variety of viewing techniques suggests that conventional photogeologic analyses of band 7 results in the location of more than 97 percent of all linears found. Bedrock lithologic types are distinguishable only where they are topographically expressed or govern land use signatures. The maxima on rose diagrams for ERTS-1 anomalies correspond well with those for mapped faults and topographic lineaments, despite a difference in relative magnitudes of maxima thought due to solar illumination direction. A multiscale analysis of linears showed that single topographic linears at 1:2,500,000 became dashed jugate linears at 1:500,000, and shorter linears lacking any conspicuous zonal alignment at 1:250,000. Most circular features found were explained away by U-2 airphoto analysis but several remain as anomalies. Visible glacial features include individual drumlins, best seen in winter imagery, drumlinoids, eskers, ice-marginal drainage channels, glacial lake shorelines and sand plains, and end moraines.

Isachsen, Y. W.↗

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. Significant results from ERTS-1 imagery are: (1) Several new lineaments or faults have been identified. (2) Study of navigational maps and the ERTS-1 imagery suggests significant mapping errors in the geodetic position of Baja California.

Abdel-Gawad, M.↗

Utilization of ERTS-1 data to monitor and classify eutrophication of inland lakes

The author has identified the following significant results. Significant findings are: (1) one-acre lakes and one-acre islands are detectable; (2)removal of atmospheric parameters derived from RPMI measurements show test lakes to have reflectances of 3.1 to 5.5% in band 4 and 0.3 to 2.3% in band 5; (3) failure to remove reflectance caused by atmosphere results in errors up to 500% in computing lake reflectance from ERTS-1 data; (4) in band 4, up to seven reflectance levels were observed in test lakes; (5) reflectance patterns have been displayed on a color-coded TV monitor and on computer-generated gray scales; (6) deep and shallow water can be separated by a trained photointerpreter and automatic machine processing, with estimates of water depth possible in some cases; (7) RPMI provides direct spectral signature measurements of lakes and lake features such as algal scums and floating plants; (8) a method is reported for obtaining lake color, as estimated by Forel-Ule standards, from ERTS-1 data; (9) a strong correlation between browner water color, diminishing water transparency; and (10) classifying lake eutrophication by observation of surface scums or macrophytes in shallow water seems straightforward.

Rogers, R. H.↗

Overall evaluation of ERTS-1 imagery for cartographic application

The author has identified the following significant results. Scientific results may be summarized as follows: (1) A geodetic (UTM) grid can be fitted to MSS bulk images with a positional accuracy in the order of 50 meters (rms). (2) The MSS imagery as corrected and printed in bulk form is in effect or a defined map projection. This projection, if optimized for cartographic presentation, will have distortions in the order of only 1 part in 10,000. (3) The orbit of ERTS-1 and image delineation of MSS imagery can be held by NASA so that predesignated scenes may be identified and used as a basis for a map series. This concept could reduce the time and cost of ERTS-1 image map production many fold as compared to standard quadrangle format production.

Colvocoresses, A. P.↗

An investigation to improve the Menhaden fishery prediction and detection model through the application of ERTS-A data

The author has identified the following significant results. Linear regression of secchi disc visibility against number of sets yielded significant results in a number of instances. The variability seen in the slope of the regression lines is due to the nonuniformity of sample size. The longer the period sampled, the larger the total number of attempts. Further, there is no reason to expect either the influence of transparency or of other variables to remain constant throughout the season. However, the fact that the data for the entire season, variable as it is, was significant at the 5% level, suggests its potential utility for predictive modeling. Thus, this regression equation will be considered representative and will be utilized for the first numerical model. Secchi disc visibility was also regressed against number of sets for the three day period September 27-September 29, 1972 to determine if surface truth data supported the intense relationship between ERTS-1 identified turbidity and fishing effort previously discussed. A very negative correlation was found. These relationship lend additional credence to the hypothesis that ERTS imagery, when utilized as a source of visibility (turbidity) data, may be useful as a predictive tool.

Maughan, P. M.↗

Relevance of ERTS to the State of Ohio

The author has identified the following significant results. A significant result was the fabrication of an image transfer and comparison device. To avoid problems and high costs encountered in manual drafting methods, Battelle staff members have fabricated an inexpensive, yet effective, technique for transferring ERTS-1 analysis displays from the Spatial Data 32-Color Viewer to maps and/or aircraft imagery. In brief, the image transfer-comparison device consists of a 2-way mirror which functions similar to a zoom transfer scope. However, the device permits multiuser viewing and real time photographic recording (35-mm and Polaroid) of enhanced ERTS-1 imagery superimposed over maps and aircraft photography. Thirty-five mm, 70 mm, and 4 in. x 5 in. photographs are taken of 80% of the TV screen of the Spatial Data Density Slicing Viewer. The resulting black and white and color imagery is then used in transparent overlays, viewgraphs, 35-mm and 70-mm transparencies, and paper prints for reports and publications. Annotations can be added on the TV screen or on the finished product.

Sweet, D. C.↗