Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Luminescence properties of IR-emitting bismuth centres in SiO{sub 2}-based glasses in the UV to near-IR spectral region

We have studied UV excitation spectra of IR luminescence in bismuth-doped glasses of various compositions and obtained energy level diagrams of IR-emitting bismuth-related active centres (BACs) associated with silicon and germanium atoms up to ∼5.2 eV over the ground level. A possible energy level diagram of the BACs in phosphosilicate glass has been proposed. The UV excitation peaks for the IR luminescence of the BACs in the glasses have been shown to considerably overlap with absorption bands of the Bi{sup 3+} ion, suggesting that Bi{sup 3+} may participate in BAC formation. (optical fibres)

36 MATERIALS SCIENCE↗

Levelized cost of energy for a Backward Bent Duct Buoy

The Reference Model Project, supported by the U.S. Department of Energy, was developed to provide publically available technical and economic benchmarks for a variety of marine energy converters. The methodology to achieve these benchmarks is to develop public domain designs that incorporate power performance estimates, structural models, anchor and mooring designs, power conversion chain designs, and estimates of the operations and maintenance, installation, and environmental permitting required. The reference model designs are intended to be conservative, robust, and experimentally verified. The Backward Bent Duct Buoy (BBDB) presented in this paper is one of three wave energy conversion devices studied within the Reference Model Project. Comprehensive modeling of the BBDB in a Northern California climate has enabled a full levelized cost of energy (LCOE) analysis to be completed on this device.

marine hydrokinetic energy development↗

Structure of odd-mass Ne, Na, and Mg nuclei

The island of inversion is a region of neutron-rich nuclei around 31 Na that are deformed in their ground states. In this region, less is known about the energy levels of odd-mass nuclei, how they evolve with increasing neutron numbers, and how they can be organized into rotational bands. We perform ab initio coupled-cluster calculations of spectra in odd-mass Ne, Na, and Mg nuclei based on an interaction of chiral effective field theory. In conclusion, our results confirm some tentative spin and parity assignments, predict the structure of nuclei near the neutron dripline, and inform us about rotational bands in this region of the nuclear table.

20 ≤ A ≤ 38↗

Generation of high-power nanosecond pulses from laser diode-pumped Nd:YAG lasers

Simulation results are used to compare the pulse energy levels and pulse energy widths that can be achieved with LD-pumped Nd:YAG lasers for both the pulse-transmission mode (PTM) and pulse-reflection mode (PRM) Q-switching methods for pulse energy levels up to hundreds of microjoules and pulse widths as short as 1 ns. It is shown that high-power pulses with pulse widths as short as 1 ns can be generated with PTM Q-switched in LD-pumped Nd:YAG lasers. With the PRM Q-switching method, pulse widths as short as 2 ns and pulse energy at the level of a few hundred microjoules can also be achieved but require pumping with 8-10-mJ AlGaAs laser diode arrays.

Chan, Kinpui↗

Poole-Frenkel-effect as dominating current mechanism in thin oxide films—An illusion?!

In many of the publications, over 50 per year for the last five years, the Poole-Frenkel-effect (PFE) is identified or suggested as dominating current mechanism to explain measured current–electric field dependencies in metal-insulator-metal (MIM) thin film stacks. Very often, the insulating thin film is a metal oxide as this class of materials has many important applications, especially in information technology. In the overwhelming majority of the papers, the identification of the PFE as dominating current mechanism is made by the slope of the current–electric field curve in the so-called Poole-Frenkel plot, i.e., logarithm of current density, j, divided by the applied electric field, F, versus the square root of that field. This plot is suggested by the simplest current equation for the PFE, which comprises this proportionality (ln(j/F) vs. F{sup 1/2}) leading to a straight line in this plot. Only one other parameter (except natural constants) may influence this slope: the optical dielectric constant of the insulating film. In order to identify the importance of the PFE simulation studies of the current through MIM stacks with thin insulating films were performed and the current–electric field curves without and with implementation of the PFE were compared. For the simulation, an advanced current model has been used combining electronic carrier injection/ejection currents at the interfaces, described by thermionic emission, with the carrier transport in the dielectric, described by drift and diffusion of electrons and holes in a wide band gap semiconductor. Besides the applied electric field (or voltage), many other important parameters have been varied: the density of the traps (with donor- and acceptor-like behavior); the zero-field energy level of the traps within the energy gap, this energy level is changed by the PFE (also called internal Schottky effect); the thickness of the dielectric film; the permittivity of the dielectric film simulating different oxide materials; the barriers for electrons and holes at the interfaces simulating different electrode materials; the temperature. The main results and conclusions are: (1) For a single type of trap present only (donor-like or acceptor-like), none of the simulated current density curves shows the expected behavior of the PFE and in most cases within the tested parameter field the effect of PFE is negligibly small. (2) For both types of traps present (compensation) only in the case of exact compensation, the expected slope in the PF-plot was nearly found for a wider range of the applied electric field, but for a very small range of the tested parameter field because of the very restricting additional conditions: first, the quasi-fermi level of the current controlling particle (electrons or holes) has to be 0.1 to 0.5 eV closer to the respective band limit than the zero-field energy level of the respective traps and, second, the compensating trap energy level has to be shallow. The conclusion from all these results is: the observation of the PFE as dominating current mechanism in MIM stacks with thin dielectric (oxide) films (typically 30 nm) is rather improbable!.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Long wavelength infrared detector

Long wavelength infrared detection is achieved by a detector made with layers of quantum well material bounded on each side by barrier material to form paired quantum wells, each quantum well having a single energy level. The width and depth of the paired quantum wells, and the spacing therebetween, are selected to split the single energy level with an upper energy level near the top of the energy wells. The spacing is selected for splitting the single energy level into two energy levels with a difference between levels sufficiently small for detection of infrared radiation of a desired wavelength.

Vasquez, Richard P.↗

Capacity Payments in Restructured Markets under Low and High Penetration Levels of Renewable Energy

Growing levels of variable renewable energy resources arguably create new challenges for capacity market designs, because variable renewable energy suppresses wholesale energy prices while providing relatively little capacity. This effect becomes more pronounced the higher the variable renewable energy penetration in a market. The purpose of this report is threefold. First, we provide a brief outline of the purpose and design of various capacity markets using administratively determined capacity demand curves. Second, we discuss some of the main challenges raised in existing literature and a set of interviews that we conducted with market participants, regulators, and observers. Third, we consider some of the challenges to capacity markets that arise with higher variable renewable energy penetration.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A damage tolerance comparison of 7075-T6 aluminum alloy and IM7/977-2 carbon/epoxy

A comparison of low velocity impact damage between one of the strongest aluminum alloys, to a new, damage tolerant resin system as a matrix for high strength carbon fibers was examined in this study. The aluminum and composite materials were used as face sheets on a 0.13 g/cu cm aluminum honeycomb. Four levels of impact energy were used; 2.6 J, 5.3 J, 7.8 J and 9.9 J. The beams were compared for static strength and fatique life by use of the four-point bend flexure test. It was found that in the undamaged state the specific strength of the composite face sheets was about twice that of the aluminum face sheets. A sharp drop in strength was observed for the composite specimens impacted at the lowest (2.6J) energy level, but the overall specific strength was still higher than for the aluminum specimens. At all impact energy levels tested, the static specific strength of the composite face sheets were significantly higher than the aluminum face sheets. The fatigue life of the most severely damaged composite specimen was about 17 times greater than the undamaged aluminum specimens when cycled at 1 Hz between 20 percent and 85 percent of ultimate breaking load.

Nettles, Alan T.↗

Direct evidence of three-body interactions in a cold {sup 85}Rb Rydberg gas

Cold Rydberg atoms trapped in a magneto-optical trap (MOT) are not isolated and they interact through dipole-dipole and multipole-multipole interactions. First-order dipole-dipole interactions and van der Waals interactions between two atoms have been intensively studied. However, the facts that the first-order dipole-dipole interactions and van der Waals interactions show the same size of broadening [A. Reinhard, K. C. Younge, T. C. Liebisch, B. Knuffman, P. R. Berman, and G. Raithel, Phys. Rev. Lett. 100, 233201 (2008)] and there are transitions between two dimer states [S. M. Farooqi, D. Tong, S. Krishnan, J. Stanojevic, Y. P. Zhang, J. R. Ensher, A. S. Estrin, C. Boisseau, R. Cote, E. E. Eyler, and P. L. Gould, Phys. Rev. Lett. 91, 183002 (2003); K. R. Overstreet, Arne Schwettmann, Jonathan Tallant, and James P. Shaffer, Phys. Rev. A 76, 011403(R) (2007)] cannot be explained by the two-atom picture. The purpose of this article is to show the few-body nature of a dense cold Rydberg gas by studying the molecular-state microwave spectra. Specifically, three-body energy levels have been calculated. Moreover, the transition from three-body energy levels to two-body coupled molecular energy levels and to isolated atomic energy levels as a function of the internuclear spacing is studied. Finally, single-body, two-body, and three-body interaction regions are estimated according to the experimental data. The results reported here provides useful information for plasma formation, further cooling, and superfluid formation.

74 ATOMIC AND MOLECULAR PHYSICS↗

On the interaction of the Dirac oscillator with the Aharonov–Casher system in topological defect backgrounds

In this paper, we study the influence of the Aharonov–Casher effect [Y. Aharonov, A. Casher, Phys. Rev. Lett. 53 (1984) 319] on the Dirac oscillator in three different scenarios of general relativity: the Minkowski spacetime, the cosmic string spacetime and the cosmic dislocation spacetime. In this way, we solve the Dirac equation and obtain the energy levels for bound states and the Dirac spinors for positive-energy solutions. We show that the relativistic energy levels depend on the Aharonov–Casher geometric phase. We also discuss the influence of curvature and torsion on the relativistic energy levels and the Dirac spinors due to the topology of the cosmic string and cosmic dislocation spacetimes. -- Highlights: •Influence of the Aharonov–Casher effect on the Dirac oscillator. •Exact solutions of the Dirac equation in topological defect spacetimes. •Dependence of the relativistic energy levels on the Aharonov–Casher geometric phase. •Influence of curvature and torsion on the relativistic energy levels and the Dirac spinors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation on the upconversion luminescence in Ho3+/Yb3+ co-doped Ba3Sc4O9 phosphor

Highlights: • The optical properties of novel Ba{sub 3}Y{sub 4}O{sub 9}:Ho{sup 3+}/Yb{sup 3+} phosphor were investigated. • The luminescence color could be tuned from green to yellow-green light. • The energy transfer mechanisms of UC luminescence were investigated in detail. • The phosphor can be a good candidate for green UC material in display fields and fluorescent labeling. - Abstract: A series of Ba{sub 3}Sc{sub 4}O{sub 9}:Ho{sup 3+}/Yb{sup 3+} phosphors were synthesized by a high-temperature solid-state reaction method. The phase purity and upconversion luminescence were characterized by X-ray diffraction and photoluminescence spectroscopy. The sintering temperature and doping concentrations were optimized to obtain the strongest emission intensity. Under 980 nm laser diode excitation, the green (545 nm, {sup 5}F{sub 4}/{sup 5}S{sub 2} → {sup 5}I{sub 8}) and red (665 nm, {sup 5}F{sub 5} → {sup 5}I{sub 8}) emissions were observed. The cross-relaxation and back-energy-transfer processes play an important role to adjust the emission intensity ratio of Green/Red at different dopant concentrations. Based on the energy level diagrams, the energy transfer mechanisms are investigated in detail according to the analysis of pump power dependence and luminescence decay curves. The upconversion luminescence properties of the phosphor were evaluated and the results show good color monochromaticity and relatively high upconversion luminescence intensity. The Ba{sub 3}Sc{sub 4}O{sub 9}:Ho{sup 3+}/Yb{sup 3+} can be a good candidate for green upconversion material in display fields and fluorescent labeling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable Semiconductors: Control over Carrier States and Excitations in Layered Hybrid Organic-Inorganic Perovskites

Here, for a class of 2D hybrid organic-inorganic perovskite semiconductors based on π-conjugated organic cations, we predict quantitatively how varying the organic and inorganic component allows control over the nature, energy, and localization of carrier states in a quantum-well-like fashion. Our first-principles predictions, based on large-scale hybrid density-functional theory with spin-orbit coupling, show that the interface between the organic and inorganic parts within a single hybrid can be modulated systematically, enabling us to select between different type-I and type-II energy level alignments. Lastly, energy levels, recombination properties, and transport behavior of electrons and holes thus become tunable by choosing specific organic functionalizations and juxtaposing them with suitable inorganic components.

36 MATERIALS SCIENCE↗

SU-D-BRA-06: Dual-Energy Chest CT: The Effects of Virtual Monochromatic Reconstructions On Texture Analysis Features

Purpose: To characterize the effect of virtual monochromatic reconstructions on several commonly used texture analysis features in DECT of the chest. Further, to assess the effect of monochromatic energy levels on the ability of these textural features to identify tissue types. Methods: 20 consecutive patients underwent chest CTs for evaluation of lung nodules using Siemens Somatom Definition Flash DECT. Virtual monochromatic images were constructed at 10keV intervals from 40–190keV. For each patient, an ROI delineated the lesion under investigation, and cylindrical ROI’s were placed within 5 different healthy tissues (blood, fat, muscle, lung, and liver). Several histogram- and Grey Level Cooccurrence Matrix (GLCM)-based texture features were then evaluated in each ROI at each energy level. As a means of validation, these feature values were then used in a random forest classifier to attempt to identify the tissue types present within each ROI. Their predictive accuracy at each energy level was recorded. Results: All textural features changed considerably with virtual monochromatic energy, particularly below 70keV. Most features exhibited a global minimum or maximum around 80keV, and while feature values changed with energy above this, patient ranking was generally unaffected. As expected, blood demonstrated the lowest inter-patient variability, for all features, while lung lesions (encompassing many different pathologies) exhibited the highest. The accuracy of these features in identifying tissues (76% accuracy) was highest at 80keV, but no clear relationship between energy and classification accuracy was found. Two common misclassifications (blood vs liver and muscle vs fat) accounted for the majority (24 of the 28) errors observed. Conclusion: All textural features were highly dependent on virtual monochromatic energy level, especially below 80keV, and were more stable above this energy. However, in a random forest model, these commonly used features were able to reliably differentiate between most tissues types regardless of energy level. Dr Godoy has received a dual-energy CT research grant from Siemens Healthcare. That grant did not directly fund this research.

60 APPLIED LIFE SCIENCES↗

Quinolyl functionalized spiro[fluorene-9,9'-xanthene] host materials with bipolar characteristics for green and red phosphorescent organic light-emitting diodes

Spiro[fluorene-9,9'-xanthene] (SFX) bipolar hosts bearing one, two and three quinolyl substituents, namely SFX-bPy, SFX-DbPy and SFX-TbPy, were designed and synthesized for phosphorescent organic light emitting diodes (PhOLEDs). The successive substitution of quinoline at 2', 2 and 7' positions of SFX results in reduced LUMO energy levels while leaving the HOMO energy levels nearly intact. The impact of quinoline substitution in these SFX-based hosts on PhOLED performance was investigated in detail through green and red model devices. For the green emitting devices, the device based on SFX-bPy host showed better performance (23.6 cd A -1 , 23.4 lm W -1 , 6.3%) due to high triplet energy level ( T 1 ) and balanced carriers-transporting ability. In contrast, for the red PhOLED devices, the device hosted by SFX-DbPy displayed higher performance (15.8 cd A -1 , 16.0 lm W -1 , 9.1%), attributable to the well matched T 1 and separated frontier molecular orbitals. This work thus sheds light on the rational design of SFX-based bipolar hosts for more efficient PhOLEDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined effect of Debye plasma environment and external electric field on hydrogen atom

We consider weakly coupled plasmas, characterized by Debye-Huckel model potential, and an external electric field along z-axis. Due to plasma environment the energy levels of atom are shifted up, bound states are merged to continuum. For external electric field the excited energy levels also split up; degenerate energy eigenvalues become nondegenerate. In the presence of external electric field, energy levels are shifted up and down, except ground state. The ground state energy value is shifted only down. Therefore, it is very interesting to study the combined effect of plasmas and external electric field on a simple atom (hydrogen). To calculate the energy levels and the corresponding states, we expand the wave function in terms of linear combination of the basis functions. The basis is generated by hydrogenic wave functions. Here, we estimate various plasma surroundings and electric field strengths. We observe converged results for the basis size 45, with angular momentum states up to eight.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopy of a one-dimensional V-shaped quantum well with a point impurity

We consider the one-dimensional Hamiltonian with a V-shaped potential H{sub 0}=(1/2) [−((d{sup 2})/(dx{sup 2}))+|x|], decorated with a point impurity of either δ-type, or local δ{sup ′}-type or even nonlocal δ{sup ′}-type, thus yielding three exactly solvable models. We analyse the behaviour of the change in the energy levels when an interaction of the type −λ δ(x) or −λ δ(x−x{sub 0}) is switched on. In the first case, even energy levels, pertaining to antisymmetric bound states, remain invariant with respect to λ even though odd energy levels, pertaining to symmetric bound states, decrease as λ increases. In the second, all energy levels decrease when the factor λ increases. A similar study has been performed for the so-called nonlocal δ{sup ′} interaction, requiring a coupling constant renormalisation, which implies the replacement of the form factor λ by a renormalised form factor β. In terms of β, odd energy levels are unchanged. However, we show the existence of level crossings: after a fixed value of β the energy of each even level, with the natural exception of the first one, becomes lower than the constant energy of the previous odd level. Finally, we consider an interaction of the type −λδ(x)+μδ{sup ′}(x), and analyse in detail the discrete spectrum of the resulting self-adjoint Hamiltonian.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation and prediction of color-tunable organic light-emitting diodes based on carrier/exciton adjusting interlayer

A color tuning index (I{sub CT}) parameter for evaluating the color change capability of color-tunable organic light-emitting diodes (CT-OLEDs) was proposed and formulated. And a series of CT-OLEDs, consisting of five different carrier/exciton adjusting interlayers (C/EALs) inserted between two complementary emitting layers, were fabricated and applied to disclose the relationship between I{sub CT} and C/EALs. The result showed that the trend of electroluminescence spectra behavior in CT-OLEDs has good accordance with I{sub CT} values, indicating that the I{sub CT} parameter is feasible for the evaluation of color variation. Meanwhile, by changing energy level and C/EAL thickness, the optimized device with the widest color tuning range was based on N,N′-dicarbazolyl-3,5-benzene C/EAL, exhibiting the highest I{sub CT} value of 41.2%. Based on carrier quadratic hopping theory and exciton transfer model, two fitting I{sub CT} formulas derived from the highest occupied molecular orbital (HOMO) energy level and triplet energy level were simulated. Finally, a color tuning prediction (CTP) model was developed to deduce the I{sub CT} via C/EAL HOMO and triplet energy levels, and verified by the fabricated OLEDs with five different C/EALs. We believe that the CTP model assisted with I{sub CT} parameter will be helpful for fabricating high performance CT-OLEDs with a broad range of color tuning.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards monomaterial p-n junctions: Single-step fabrication of tin oxide films and their non-destructive characterisation by angle-dependent X-ray photoelectron spectroscopy

The application of a non-destructive method for characterization of electronic structure of an ultra-thin SnO{sub 1<x<2} layer synthesized by spin coating on Si wafers was demonstrated. Utilizing angle dependent XPS, we quantified stoichiometry changes inside the SnO{sub 1<x<2} layers of thickness comparable with the electron attenuation length. The O/Sn concentration varied from 1.25 near the SnO{sub x} surface to 1.10 near the substrate/overlayer interface. Deviations from ideal stoichiometry are caused by defects, and defect levels affect the band structure of the SnO{sub x} layers. By investigation of the valence band region, followed by main core level position tracking, changes of electronic parameters like energy levels shift were identified. The results indicated a downward energy levels shift by 0.45 eV in SnO{sub x} layers at the SiO{sub 2}/SnO{sub x} interface. In combination with the detected upward energy levels shift in the substrate's electronic structure, these results suggest a negative charge displacement across the SiO{sub 2} layer. As a consequence, there is a significant carrier concentration gradient in the layer, from a nearly insulating oxide at the SnO{sub x} surface to a semiconducting one at the bottom of the SnO{sub x} film. The results showed that the application of a simple and cost-effective method allows tuning the materials' properties towards the one-step fabrication of materials with ambipolar doping.

36 MATERIALS SCIENCE↗