Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electromagnets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Theory and simulation of electromagnetic beam modes and whistlers

Using particle-in-cell simulations and analytical methods, a study of the nonlinear evolution of electromagnetic instabilities driven by an anisotropic electron beam in an external magnetic field is performed. The unstable waves are either whistlerlike or beam-mode-like depending on the external field strength and beam velocity. The evolution of the particle distribution differs significantly in the two regimes. Even in the presence of a faster electrostatic instability, the electromagnetic waves grow to a significant amplitude. In certain cases, an energetic tail is formed, resulting in enhanced Cerenkov emission of electrostatic waves. The initial evolution of the particle distribution is explained in terms of the interaction of a given linearly unstable wave with the self-consistent perturbed distribution.

Newman, David L.↗

The electromagnetic ion cyclotron instability in the Io torus

The electromagnetic ion cyclotron waves which are expected to exist in the Jovian magnetosphere are investigated. The temperature anisotropy generated by the inward radial diffusion of hot ions gives rise to an instability of L mode waves in the off-equatorial region of the Io torus. The resulting pitch angle scattering has been suggested as the cause for the precipitation of ions into the loss cone and auroral excitation. The linear wave dispersion is first examined, and the nonlinear wave amplitude for the saturated state is studied. Two estimates of the wave saturation level are checked by performing an electromagnetic hybrid simulation. Estimated nonlinear saturation amplitudes are compared with those resulting from linear amplification in a finite length. The result shows that the waves in the Jovian magnetosphere produced by the hot protons are mostly in a linear regime.

Machida, S.↗

Electromagnetic wave propagation through a dielectric-chiral interface and through a chiral slab

The reflection from and transmission through a semiinfinite chiral medium are analyzed by obtaining the Fresnel equations in terms of parallel- and perpendicular-polarized modes, and a comparison is made with results reported previously. The chiral medium is described electromagnetically by the constitutive relations D = (epsilon)E+i(gamma)B and H = i(gamma)E+(1/mu)B. The constants epsilon, mu and gamma are real and have values that are fixed by the size, the shape, and the spatial distribution of the elements that collectively compose the medium. The conditions are obtained for the total internal reflection of the incident wave from the interface and for the existence of the Brewster angle. The effects of the chirality on the polarization and the intensity of the reflected wave from the chiral half-space are discussed and illustrated by using the Stokes parameters. The propagation of electromagnetic wave through an infinite slab of chiral medium is formulated for oblique incidence and solved analytically for the case of normal incidence.

Bassiri, S.↗

Current driven instabilities of an electromagnetically accelerated plasma

A plasma instability that strongly influences the efficiency and lifetime of electromagnetic plasma accelerators was quantitatively measured. Experimental measurements of dispersion relations (wave phase velocities), spatial growth rates, and stability boundaries are reported. The measured critical wave parameters are in excellent agreement with theoretical instability boundary predictions. The instability is current driven and affects a wide spectrum of longitudinal (electrostatic) oscillations. Current driven instabilities, which are intrinsic to the high-current-carrying magnetized plasma of the magnetoplasmadynmic (MPD) accelerator, were investigated with a kinetic theoretical model based on first principles. Analytical limits of the appropriate dispersion relation yield unstable ion acoustic waves for T(i)/T(e) much less than 1 and electron acoustic waves for T(i)/T(e) much greater than 1. The resulting set of nonlinear equations for the case of T(i)/T(e) = 1, of most interest to the MPD thruster Plasma Wave Experiment, was numerically solved to yield a multiparameter set of stability boundaries. Under certain conditions, marginally stable waves traveling almost perpendicular to the magnetic field would travel at a velocity equal to that of the electron current. Such waves were termed current waves. Unstable current waves near the upper stability boundary were observed experimentally and are in accordance with theoretical predictions. This provides unambiguous proof of the existence of such instabilites in electromagnetic plasma accelerators.

Chouetri, E. Y.↗

Electromagnetic scattering by pyramidal and wedge absorber

Electromagnetic scattering from pyramidal and wedge absorbers used to line the walls of modern anechoic chambers is measured and compared with theoretically predicted values. The theoretical performance for various angles of incidence is studied. It is shown that a pyramidal absorber scatters electromagnetic energy more as a random rough surface does. The apparent reflection coefficient from an absorber wall illuminated by a plane wave can be much less than the normal absorber specifications quoted by the manufacturer. For angles near grazing incidence, pyramidal absorbers give a large backscattered field from the pyramid side-faces or edges. The wedge absorber was found to give small backscattered fields for near-grazing incidence. Based on this study, some new guidelines for the design of anechoic chambers are advocated because the specular scattering models used at present do not appear valid for pyramids that are large compared to the wavelength.

Dewitt, Brian T.↗

Concurrent electromagnetic scattering analysis

The computational power of the hypercube parallel computing architecture is applied to the solution of large-scale electromagnetic scattering and radiation problems. Three analysis codes have been implemented. A Hypercube Electromagnetic Interactive Analysis Workstation was developed to aid in the design and analysis of metallic structures such as antennas and to facilitate the use of these analysis codes. The workstation provides a general user environment for specification of the structure to be analyzed and graphical representations of the results.

Patterson, Jean E.↗

Algorithm development for Maxwell's equations for computational electromagnetism

A new algorithm has been developed for solving Maxwell's equations for the electromagnetic field. It solves the equations in the time domain with central, finite differences. The time advancement is performed implicitly, using an alternating direction implicit procedure. The space discretization is performed with finite volumes, using curvilinear coordinates with electromagnetic components along those directions. Sample calculations are presented of scattering from a metal pin, a square and a circle to demonstrate the capabilities of the new algorithm.

Goorjian, Peter M.↗

Electron beam injection during active experiments. I - Electromagnetic wave emissions

The wave emissions produced in Echo 7 experiment by active injections of electron beams were investigated to determine the properties of the electromagnetic and electrostatic fields for both the field-aligned and cross-field injection in such experiments and to evaluate the sources of free energy and relative efficiencies for the generation of the VLF and HF emissions. It is shown that, for typical beam energies in active experiments, electromagnetic effects do not substantially change the bulk properties of the beam, spacecraft charging, and plasma particle acceleration. Through simulations, beam-generated whistlers; fundamental z-mode and harmonic x-mode radiation; and electrostatic electron-cyclotron, upper-hybrid, Langmuir, and lower-hybrid waves were identified. The characteristics of the observed wave spectra were found to be sensitive to both the ratio of the electron plasma frequency to the cyclotron frequency and the angle of injection relative to the magnetic field.

Winglee, R. M.↗

Electromagnetic instabilities attributed to a cross-field ion drift

Instabilities due to a cross-field ion flow are reexamined by including the electromagnetic response of the ions, which has been ignored in existing discussions. It is found that this effect can lead to significant enhancement of the growth rate. Among the new results, a purely growing, electromagnetic unstable mode with a wave vector k parallel to the ambient magnetic field is found. The plasma configuration under consideration is similar to that used in the discussion of the well-known modified-two-stream instability. This instability has a growth rate faster than the ion cyclotron frequency, and is not susceptible to high-plasma-beta stabilization.

Chang, C. L.↗

Electromagnetic finite elements based on a four-potential variational principle

Electromagnetic finite elements based on a variational principle that uses the electromagnetic four-potential as primary variable are derived. This choice is used to construct elements suitable for downstream coupling with mechanical and thermal finite elements for the analysis of electromagnetic/mechanical systems that involve superconductors. The main advantages of the four-potential as a basis for finite element formulation are: (1) the number of degrees of freedom per node remains modest as the problem dimensionality increases, (2) jump discontinuities on interfaces are naturally accommodated, and (3) statics as well as dynamics may be treated without any a priori approximations. The new elements are tested on an axisymmetric problem under steady-state forcing conditions. The results are in excellent agreement with analytical solutions.

Schuler, James↗

Electromagnetic Gun With Commutated Coils

Proposed electromagnetic gun includes electromagnet coil, turns of which commutated in sequence along barrel. Electrical current fed to two armatures by brushes sliding on bus bars in barrel. Interaction between armature currents and magnetic field from coil produces force accelerating armature, which in turn, pushes on projectile. Commutation scheme chosen so magnetic field approximately coincides and moves with cylindrical region defined by armatures. Scheme has disadvantage of complexity, but in return, enables designer to increase driving magnetic field without increasing armature current. Attainable muzzle velocity increased substantially.

Elliott, David G.↗

Feedback controlled electrostatic and electromagnetic sample positioners

Four different sample positioners are discussed. The four systems share a common operating principle in that the sample positioning is achieved by feedback controlled forces which can be electrostatic, dielectrophoretic, or electromagnetic. The first system is the electrostatic liquid drop positioner which operates at the near ambient position. The second system is the tetrahedral electrostatic positioner which is being developed for the high temperature materials processing in vacuum. The third system is essentially the the same tetrahedral system above except that the position control is achieved by dielectrophoretic forces in the pressurized gas environment. Finally, the feasibility of a feedback controlled electromagnetic positioner is discussed.

Rhim, Won-Kyu↗

Core mass at the helium flash from observations and a new bound on neutrino electromagnetic properties

Existing measurements of the bolometric magnitudes of the brightest red giants in 26 globular clusters are used to determine the brightness difference between the tip of the red giant branch (on average found to be 0.1 mag brighter than the brightest red giant) and RR Lyrae stars. The metallicity variation of the result agrees perfectly with theoretical predictions. In conjunction with previous determinations of the number ratio of horizontal-branch versus red giant stars, with statistical parallax determinations of RR Lyrae absolute luminosities, and with theoretical predictions based on the Sweigart and Gross evolutionary sequences, this result yields an allowed range for a hypothetical core mass variation relative to the standard results of (0.009 + or - 0.012) solar mass. If neutrinos had anomalous electromagnetic dipole moments, the increased energy loss near the helium flash would lead to an increased core mass. Constraints on neutrino electromagnetic properties are determined from the color-magnitude diagrams of the globular clusters.

Raffelt, Georg G.↗

Electromagnetic ion/ion cyclotron instability at slow shocks

The linear and nonlinear properties of the obliquely propagating electromagnetic ion/ion cyclotron instability are investigated. The instability is driven by the relative, field-aligned streaming of two ion beams and can exist at a lower velocity threshold than the more commonly studied, parallel propagating electromagnetic ion beam instabilities. It is shown that the instability plays an important role in the formation of, dissipation at, and waves upstream of slow mode shocks. Possible application of this instability to ion beams in the plasma sheet boundary layer is also briefly discussed.

Winske, D.↗

Measurements of electromagnetic bias in radar altimetry

As the accuracy of satellite altimetric measurements of sea level is limited in part by the influence of ocean waves on the altimeter signal reflected from the sea surface, the difference between the mean reflecting surface and mean sea level is the electromagnetic bias. In order to obtain a better understanding of this bias, it is measured directly utilizing a 14-GHz scatterometer on the Chesapeake Bay Light Tower. It is shown that electromagnetic bias in radar altimetry may be reduced to the level required by the TOPEX/Poseidon mission utilizing only altimetric data. The mean value of beta, its variability, and the sensitivity to wind are all significantly larger than earlier measurements utilizing a 39-GHz radar carried on a low-flying aircraft.

Melville, W. K.↗

Electromagnetic axisymmetric finite elements based on a gauged four-potential variational principle

Electromagnetic finite elements are derived based on a variational principle that uses the electromagnetic four-potential as a primary variable. The Lorentz gage normalization is incorporated as a constraint condition through a Lagrange multiplier field to construct elements suitable for downstream coupling with mechanical and thermal finite elements for the analysis of high-temperature superconductor devices with aerospace applications. The main advantages are: jump discontinuities on interfaces are naturally handled; no a priori approximations are invoked; and the number of degrees of freedom per node remains modest as the problem dimensionality increases. The new elements are tested on two magnetostatic axisymmetric problems. The results are in excellent agreement with analytical solutions and previous solutions for the 1D problem of a conducting infinite wire, in which case the multiplier field has no effect. For materials of widely different permeability, jump conditions are naturally accommodated by the present formulation.

Schuler, J.↗

Further evaluation of the constrained least squares electromagnetic compensation method

Technologies exist for construction of antennas with adaptive surfaces that can compensate for many of the larger distortions caused by thermal and gravitational forces. However, as the frequency and size of reflectors increase, the subtle surface errors become significant and degrade the overall electromagnetic performance. Electromagnetic (EM) compensation through an adaptive feed array offers means for mitigation of surface distortion effects. Implementation of EM compensation is investigated with the measured surface errors of the NASA 15 meter hoop/column reflector antenna. Computer simulations are presented for: (1) a hybrid EM compensation technique, and (2) evaluating the performance of a given EM compensation method when implemented with discretized weights.

Smith, William T.↗