Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EUTECTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Study for identification of beneficial uses of Space, phase 1. Volume 2, book 2: Technical report: results, conclusions and recommendations

A variety of technologies were investigated to determine the benefits to be derived from space activities. The subjects accepted for product development are: (1) eutectics for cold cathodes, (2) higher putiry fiber optics, (3) fluidic wafers, (4) large germanium wafers for gamma ray camera, (5) improved batteries and capacitors, (6) optical filters, (7) corrosion resistant electrodes, (8) high strength carbon-based filaments for plastic reinforcement, and (9) new antibiotics. In addition, three ideas for services, involving disposal of radioactive wastes, blood analysis, and enhanced solar insolation were proposed.

Source record↗

New materials in the aerospace industries

Trends in the development of new aerospace metals and alloys are reviewed, and applications of these advanced materials in nonaerospace fields are indicated. Emphasis is placed on the light metals and the high-temperature alloys. Attention is given to the properties and uses of the high-strength aluminum alloy 7050, alpha and beta titanium alloys, dispersion strengthened superalloys, metal-metal composites, eutectic superalloys, and coated columbium alloys.

Gangler, J. J.↗

Theoretical and experimental investigation of 'grating' type photovoltaic cells

The fabrication procedure and properties of 'grating' cells made by forming a fine grating pattern of aluminum alloyed into n-silicon wafers are described. The finest grating lines achieved in the cells described were 5 microns; the smallest spacing was about 15 microns. The best temperature for alloying was found to be about 600 C, a bit above the Si-Al eutectic temperature (576 C). The short-circuit current obtained from the best of these cells exposed to 100 mW/sq cm of (simulated air mass zero) illumination was at least equal to that obtained from conventional diffused cells, but their open-circuit voltage was lower. Their quantum yield was strongly blue-shifted; it was flat from 4000 to 8500 A.

Loferski, J. J.↗

The thermal state and internal structure of Mars

The evolution and state of the interior of Mars are studied through the use of theoretically calculated thermal history and density models. Invoking melting of an Fe-FeS mixture permits initial core formation within the first billion years. At the present time the core radius ranges from about 1300 to 1800 km, depending on composition, and the core is liquid even if the composition is varied from the eutectic. Large-scale differentiation of the silicates occurs in the last 2 b.y. When the mean density is 3.96 g/cu cm, the radius is 3389 km, and the moment of inertia factor is 0.377, the density models indicate high mantle densities near 3.74 g/cu cm. Thus an FeO content of about 29% is implied, consistent with the production of a low-viscosity magma. Chemical models of the Martian mantle indicate a composition primarily of olivine with about 56% forsterite.

Johnston, D. H.↗

Study of the costs and benefits of composite materials in advanced turbofan engines

Composite component designs were developed for a number of applicable engine parts and functions. The cost and weight of each detail component was determined and its effect on the total engine cost to the aircraft manufacturer was ascertained. The economic benefits of engine or nacelle composite or eutectic turbine alloy substitutions was then calculated. Two time periods of engine certification were considered for this investigation, namely 1979 and 1985. Two methods of applying composites to these engines were employed. The first method just considered replacing an existing metal part with a composite part with no other change to the engine. The other method involved major engine redesign so that more efficient composite designs could be employed. Utilization of polymeric composites wherever payoffs were available indicated that a total improvement in Direct Operating Cost (DOC) of 2.82 to 4.64 percent, depending on the engine considered, could be attained. In addition, the percent fuel saving ranged from 1.91 to 3.53 percent. The advantages of using advanced materials in the turbine are more difficult to quantify but could go as high as an improvement in DOC of 2.33 percent and a fuel savings of 2.62 percent. Typically, based on a fleet of one hundred aircraft, a percent savings in DOC represents a savings of four million dollars per year and a percent of fuel savings equals 23,000 cu m (7,000,000 gallons) per year.

Steinhagen, C. A.↗

Abstracts, Third Space Processing Symposium, Skylab results

Skylab experiments results are reported in abstracts of papers presented at the Third Space Processing Symposium. Specific areas of interest include: exothermic brazing, metals melting, crystals, reinforced composites, glasses, eutectics; physics of the low-g processes; electrophoresis, heat flow, and convection demonstrations flown on Apollo missions; and apparatus for containerless processing, heating, cooling, and containing materials.

Source record↗

Metal matrix composites for aircraft propulsion systems

Studies of advanced aircraft propulsion systems have indicated that performance gains and operating costs are possible through the application of metal matrix composites. Compressor fan blades and turbine blades have been identified as components with high payoff potential as a result of these studies. This paper will present the current status of development of five candidate materials for such applications. Boron fiber/aluminum, boron fiber/titanium, and silicon carbide fiber/titanium composites are considered for lightweight compressor fan blades. Directionally solidified eutectic superalloy and tungsten wire/superalloy composites are considered for application to turbine blades for use temperatures to 1100 C (2000 F).

Signorelli, R. A.↗

Skylab experiments on metals

The Skylab Materials Processing Facility is described. Eight experiments on metal processing under near-zero-gravity conditions were performed in this facility. Three of these involved metals and procedures of potential application to fabrication in space. A Multipurpose electric furnace within the Materials Processing Facility was employed to heat three ampoules of samples for each of the other five experiments. These five investigations cover diffusion versus convection rates in molten zinc, several immiscible alloy compositions, a whisker-reinforced silver-based composite, heat treating of porous silver samples, and a copper-aluminum eutectic.

Lundquist, C. A.↗

Skylab experiments on semiconductors and alkali halides

The space processing experiments performed during the Skylab missions included one on single crystal growth of germanium selenide and telluride, one on pure and doped germanium crystals, two on pure and doped indium antimonide, one on gallium-indium-antimony systems, and one on a sodium chloride-sodium fluoride eutectic. In each experiment, three ampoules of sample were processed in the multipurpose electric furnace within the Skylab Materials Processing Facility. All were successful in varying degrees and gave important information about crystal growth removed from the effects of earth surface gravity.

Lundquist, C. A.↗

Turbine blade processing

Space processing of directionally solidified eutectic-alloy type turbine blades is envisioned as a simple remelt operations in which precast blades are remelted in a preformed mold. Process systems based on induction melting, continuous resistance furnaces, and batch resistance furnaces were evaluated. The batch resistance furnace type process using a multiblade mold is considered to offer the best possibility for turbine blade processing.

Source record↗

Metal matrix composites for aircraft propulsion systems

A report is presented of the current status of development of five materials which might be used in the design of components for advanced aircraft propulsion systems. Boron fiber/aluminum, boron fiber/titanium, and silicon carbide fiber/titanium composites are considered for lightweight compressor fan blades. Directionally solidified eutectic superalloy and tungsten wire/superalloy composites could possibly be used in the design of turbine blades for operational temperatures as high as 1100 C.

Signorelli, R. A.↗

Progress in advanced high temperature materials technology

Significant progress has recently been made in many high temperature material categories pertinent to such applications by the industrial community. These include metal matrix composites, superalloys, directionally solidified eutectics, coatings, and ceramics. Each of these material categories is reviewed and the current state-of-the-art identified, including some assessment, when appropriate, of progress, problems, and future directions.

Freche, J. C.↗

Tungsten wire-nickel base alloy composite development

Further development and evaluation of refractory wire reinforced nickel-base alloy composites is described. Emphasis was placed on evaluating thermal fatigue resistance as a function of matrix alloy composition, fabrication variables and reinforcement level and distribution. Tests for up to 1,000 cycles were performed and the best system identified in this current work was 50v/o W/NiCrAlY. Improved resistance to thermal fatigue damage would be anticipated for specimens fabricated via optimized processing schedules. Other properties investigated included 1,093 C (2,000 F) stress rupture strength, impact resistance and static air oxidation. A composite consisting of 30v/o W-Hf-C alloy fibers in a NiCrAlY alloy matrix was shown to have a 100-hour stress rupture strength at 1,093 C (2,000 F) of 365 MN/square meters (53 ksi) or a specific strength advantage of about 3:1 over typical D.S. eutectics.

Brentnall, W. D.↗

Low vapor pressure braze alloys for thermionic energy converters

The evaluation of cesium diode electrode materials called for braze fillers with very low vapor pressures and a wide range of melting points. Binary alloys of low vapor pressure refractory metals were chosen to fill this need. These alloys of Th, Zr, Hf, Ru, Nb, Ir, Mo, Ta, Os, Re, and W have reported melting point minima or eutectics from 1,510 K to above 3,000 K. Preliminary data are compiled on the use of several of these braze alloys. Melting points and surface wetting on a Ta base are given. Results of brazing Ir, LaB6, Nb, Re, W, and Zr-22 wt % ZrO2 materials into Ta and Nb-1% Zr bases are presented. Current braze usage is summarized.

Bair, V. L.↗

Trends in high temperature materials technology for advanced aircraft turbine engines

The utilization of high temperature materials for turbine blades, disks, vanes, and combustors is reviewed. The use of directionally solidified eutectic alloys and of metal fiber reinforced superalloys as turbine blade materials is discussed. The application of powder metallurgy to the production of turbine disks is considered. It is shown that oxide-dispersion strengthened alloys (including NiCr and NiCr-Al) and ceramics are the best refractory turbine vane materials. The use of heat resistant sheet alloys as combustor materials is examined. The cost benefits to be derived from the application of high temperature technology to advanced CTOL and STOL engines are described.

Blankenship, C. P.↗

The influence of growth rate and temperature on high cycle fatigue of Al-Al3Ni

High-cycle fatigue tests have been conducted on specimens of an Al-Al3Ni eutectic alloy, unidirectionally solidified at selected rates from 0.000139 to 0.3 cm/sec. Tests were conducted in air at 298, 458 and 683 K. Room temperature fatigue lives were independent of growth rate at low solidification rates but were markedly improved in samples grown at 0.3 cm/sec. Materials grown at 0.00833 cm/sec exhibited fatigue lives similar to those of the lower growth rates, despite gross misalignment due to cellular growth. The dependence of fatigue life on growth rate at elevated temperatures appears to be due primarily to differences in cyclic creep rates as a result of varying interfiber spacings. Crack initiation and propagation mechanisms were established by metallographic and fractographic examination. Dislocation substructure-fiber interactions were studied by transmission electron microscopy.

Maurer, G. E.↗

Conference on In Situ Composites, 2nd, Bolton Landing, N.Y., September 2-5, 1975, Proceedings

The present collection of papers deals with advances in several areas of interest in in-situ composites. Major areas discussed include solidification and structural control, physical properties, mechanical behavior, stability, environmental response, and development of new metallic and ceramic systems. New evidence about directional solidification in terms of temperature gradients is presented along with solidification rates for successful formation of in-situ composite structures. Much is learned about the factors that control structure in directionally solidified eutectic alloys and the relationship of properties to structure, especially the change in properties as a function of operating environment. Less progress is achieved in the area of physical properties than in the area of mechanical properties. Individual items are announced in this issue.

Jackson, M. R.↗

Electrical properties of epoxies and film resistors

The reliability of hybrid microcircuits has been enhanced in recent years by the use of organic adhesives as a replacement for solder and eutectics. The epoxies have been the most effective and widely used material for this application. Methods for measuring the electrical and mechanical properties of epoxies are developed. Data are given for selected conductive adhesives at high and low frequencies. The temperature coefficients of resistance of thick film resistors are presented.

Sergent, J. E.↗